Académique Documents
Professionnel Documents
Culture Documents
VP 04/2006
PRE 200102
Date:
Page:
19.06.2006
2
Notes / Legend
Factory kit (ZA):
Ready to install in the field. The kit contains all necessary drawings
and assembly instructions. Assembly parts which may be deleted,
can not be credited.
Date:
Page:
19.06.2006
3
Table of content
BASIC MACHINE
1.1
1.2
1.3
1.4
1.5
1.6
1.7
14
2.1
2.2
2.3
2.4
14
15
16
17
SEATS
18
19
20
ADDITIONAL GAUGES
Standard: Round instrument
Option: Vibration frequency gauge (AZ10)
Option: Tachograph (AZ12)
Option: Voltmeter (AZ15)
Option: Engine speed gauge (AZ5)
Option: Speedometer (AZ9)
MEASUREMENT TECHNIQUE
6.1
6.2
6.3
6.4
6.5
6.6
6.7
18
5.1
5.2
5.3
5.4
5.5
5.6
6
5
6
7
8
10
12
13
LIGHTS
20
21
22
23
23
25
26
27
28
29
30
30
31
32
33
34
35
36
37
37
38
39
40
41
42
43
TYRES
8.1 Standard: Diamond tread tyres
8.2 Option: Tractor tread tyres (T6)
8.3 Option: Tyre ballast (T28)
BIO OIL
9.1 Option: Bio-degradable hydraulic oil (HY2)
Date:
Page:
19.06.2006
4
44
44
45
46
47
47
48
48
49
50
51
52
52
53
54
55
56
Date:
Page:
19.06.2006
5
Basic machine
Option: Operator's platform with railing (FS10)
Seite: 1/1 (ID: 135)
Order references:
Minimum standard for single drum rollers: Railing (FS10) (option is necessary for single drum roller if no
cabin S21 or S31 and/or ROPS/FOPS is desired).
For field kit, order of sun roof (NS S3) is obligatory.
Scope of delivery:
1 railing for operator platform
1 vandalism protection for the control elements (plastics)
1 rigid steering column
1 seat (design see chapter operator seats)
for working lights order option E24 (see picture)
Round instrument for controls and warning indicators (details see chapter indicators)
Mechanical travel lever
ZA
582 001 30
582 001 30
582 001 30
582 001 30
582 001 30
582 001 30
NS
-
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
6
Basic machine
Option: Sun roof (S3)
Seite: 1/1 (ID: 136)
Order references:
With delivery ex works, also order as field kit (NS S3), the order of the option railing (ZA FS10) is
obligatory.
Weight distribution:
Total:
+
160 kg
Drum:
+
60 kg
Wheels:
+
100 kg
Scope of delivery:
Sun roof on two sectional steel supports
Sun roof
ZA
-
NS
582 020 40
582 020 40
582 020 40
582 020 40
582 020 40
582 020 40
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
7
Basic machine
Option: ROPS / FOPS (S5)
Seite: 1/1 (ID: 137)
Explanations:
ROPS - Roll Over Protection Structure
FOPS - Falling Object Protective Structure
Weight distribution:
Total:
+ 300 kg
Drum:
+ 100 kg
Wheels: + 200 kg
Scope of delivery optional equipment ZA:
Railing FS10
Two sectional steel supports
FOPS protection roof
Sun roof made of steel plate
ROPS / FOPS
ZA
582 001 68
582 001 68
582 001 68
582 001 68
582 001 68
582 001 68
NS
-
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
8
Basic machine
Option: Machine tools (WE1)
Seite: 1/2 (ID: 182)
Explanations:
The tool set is prepared for the recommended maintenance works. The tool set is stored in a shelf
behind the seat. This sehlf has a lockable lid on single drum rollers with railing and sun roof or ROPS /
FOPS. This option is only available as field kit.
Machine tools
ZA
-
NS
008 399 16
008 399 16
008 399 16
008 399 16
008 399 16
008 399 16
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Basic machine
1.4
Date:
Page:
19.06.2006
9
Machine tools
ZA
-
NS
008 399 16
008 399 16
008 399 16
008 399 16
008 399 16
008 399 16
Template: 1-1-2
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
10
Basic machine
Option: ROPS cabin with working lights and heating (S21)
Seite: 1/2 (ID: 138)
Explanations:
ROPS - Roll Over Protection Structure
Order references:
If cabin is desired with air conditioning, please order option S31.
Weight distribution:
Total:
+ 520 kg
Drum:
+ 170 kg
Wheels: + 350 kg
ZA
582 001 04
582 001 64
582 001 04
582 001 64
582 001 04
582 001 64
NS
582 020 48
582 020 48
582 020 48
582 020 48
582 020 48
582 020 48
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Basic machine
1.5
Date:
Page:
19.06.2006
11
ZA
582 001 04
582 001 64
582 001 04
582 001 64
582 001 04
582 001 64
NS
582 020 48
582 020 48
582 020 48
582 020 48
582 020 48
582 020 48
Template: 1-1-2
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
12
Basic machine
Option: ROPS cabin with working lights and heat-air conditioning module (S31)
Seite: 1/1 (ID: 139)
Explanations:
ROPS - Roll Over Protection Structure
Order references:
If cabin is requested only with heating, please order option S21.
Weight distribution:
Total:
+ 520 kg
Drum:
+ 170 kg
Wheels: + 350 kg
Scope of delivery optional equipment ZA:
Heat-air condition module
ROPS structure
Safety belt
2 large outside mirrors
Windshield wipers and windshield washer system in front and in rear
Working lights 2x in front and 2x in rear
Various deposit and storage areas
Tank for windshield washer system
Safety glass
Ventilator with infinite variable blower
Heater with engine cooling water
Electrical window heating for rear window
Interior lining
ZA
582 001 28
582 001 65
582 001 28
582 001 65
582 001 28
582 001 65
NS
-
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
13
Basic machine
Option: Heat - Air conditioning (K3)
Seite: 1/1 (ID: 140)
Explanations:
Field kit for single drum rollers with cabin and heating (ZA S21)
Scope of delivery optional equipment ZA:
Complete heat-air module
ZA
-
NS
582 020 49
582 020 49
582 020 49
582 020 49
582 020 49
582 020 49
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
14
Lights
Standard: Lights for single drum rollers with cabin
(ID: 142)
ZA
-
NS
-
Template: 4-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
15
Lights
Option: Working lights for ROPS and sun roof (E1)
Seite: 1/1 (ID: 143)
Order references:
For sun roof please order the option: Lights for railing (E24) or field kit : Working lights (NS E1)
Scope of delivery:
2 headlights in front
2 headlights in rear
ZA
582 006 32
582 006 32
582 006 32
582 006 32
582 006 32
582 006 32
NS
582 020 41
582 020 41
582 020 41
582 020 41
582 020 41
582 020 41
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
16
Lights
Option: Lights for road traffic (E2)
(ID: 144)
Explanations:
Lighting is required for driving the rollers
in public road traffic. The lights are mounted on
the rear frame or the cabin. All necessary
controls are integrated in the instrument panel.
Scope of delivery:
2 head lights white, in front
2 rear lights red, in rear
4 indicator lights red, in front and rear with
warning light function
2 reflectors
ZA
582 006 37
582 006 37
582 006 37
582 006 37
582 006 37
582 006 37
NS
-
Template: 4-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
17
Lights
Option: Lights for railing (E24)
Seite: 1/1 (ID: 145)
Explanations:
Lights are mounted to the railing.
Order references:
The option E24 is only available for single drum rollers with only railing (FS10) or sun roof (NS S3).
Scope of delivery:
2 headlights in front
2 tail lights, in rear
ZA
582 001 31
582 001 31
582 001 31
582 001 31
582 001 31
582 001 31
NS
-
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
18
Seats
Standard: Standard seat
Seite: 1/1 (ID: 168)
Explanations:
Standard seat with leatherette seat cover
Valid for machines with railing, sun roof, ROPS/FOPS and ROPS cabin
Adjustments:
Adjustable to weight (3 step)
Backrest infinitely adjustable
Slideable to front and rear
Black weather proof leatherette cover
Standard seat
ZA
-
NS
-
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 211 PD-40
BW 212 D-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
19
Seats
Option: Comfort seat (FS2)
Seite: 1/1 (ID: 169)
Explanations:
Comfort seat with leatherette seat cover for single drum rollers with ROPS/FOPS and sun roof or only
railing. Comfort seat with textile seat cover for single drum rollers with ROPS cabin S21 or S31.
Adjustments:
Adjustable to weight (3 step)
Slideable to front and rear
Backrest extension
Backrest infinitely adjustable
Arm rest on both sides
Adapter +/- 20
Comfort seat
ZA
582 001 66
582 001 66
582 001 66
582 001 66
582 001 66
582 001 66
NS
-
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
20
Explanations:
CD radio in standard pit
Drive is vibration-proof
Order references:
Only for single drum rollers with cabin
Scope of delivery:
CD radio in standard pit
Antenna
2 speakers
Radio
ZA
582 006 50
582 006 50
582 006 50
582 006 50
582 006 50
582 006 50
NS
-
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
21
Explanations:
Rotary beacon on left side of cabin
Colour: orange
Connection base is standard for all ROPS cabins S21 and S31
Only available as field kit
Rotary beacon is packed and added to the machine
Order references:
Only for single drum rollers with S21 and S31
For single drum rollers with sun roof (S3) and ROPS-FOPS (S5) please order E31!
Scope of delivery:
Rotary beacon with standard connection
Rotary beacon
ZA
582 028 16
582 028 16
582 028 16
582 028 16
582 028 16
582 028 16
NS
-
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
22
Explanations:
Rotary beacon with magnet for single drum rollers with railing (FS10), sun roof (S3) and ROPS/FOPS
(S5).
Option is only available as field kit.
Colour: orange
Connection via 12 V plug
ZA
582 028 17
582 028 17
582 028 17
582 028 17
582 028 17
582 028 17
NS
-
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
23
Additional gauges
Standard: Round instrument
Seite: 1/2 (ID: 151)
Round instrument
ZA
-
NS
-
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Additional gauges
5.1
Date:
Page:
19.06.2006
24
Explanations:
Round instrument with following gauges
Machines
Gauges in the round instrument
D/PD-40
Standard package
Analogue gauges
Fuel capacity
Engine rated speed
(max. 3. pcs)
x
AZ5
Speedometer
AZ9
x
AZ10
AZ15
x
x
x
indication in engine
compartment
indication in engine
compartment
indication in engine
compartment
x
x
x
E2
E2
Round instrument
ZA
-
NS
-
Template: 1-1-2
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
D/PD-40
Single options
Date:
Page:
19.06.2006
25
Additional gauges
Option: Vibration frequency gauge (AZ10)
Seite: 1/1 (ID: 152)
Explanations:
Analogue gauge of vibration frequency
Measurement range: 0-50 Hz
Measurement range: 0-3000 min-1
ZA
582 001 19
582 001 19
582 001 19
582 001 19
582 001 19
582 001 19
NS
-
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
26
Additional gauges
Option: Tachograph (AZ12)
(ID: 153)
Explanations:
The tachograph indicates the vibration
frequency and the travel speed and records the
values on a tacho disc. In France and in
countries with French construction regulation
the tachograph is required. The option is
mounted in the roof console in a standard pit.
Tachograph
ZA
582 001 17
582 001 17
582 001 17
582 001 17
582 001 17
582 001 17
NS
-
Template: 4-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
27
Additional gauges
Option: Voltmeter (AZ15)
Seite: 1/1 (ID: 154)
Explanations:
Analogue voltmeter for battery voltage
Measurement range: 8-16 V
Voltmeter
ZA
582 001 16
582 001 16
582 001 16
582 001 16
582 001 16
582 001 16
NS
-
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
28
Additional gauges
Option: Engine speed gauge (AZ5)
Seite: 1/1 (ID: 155)
Explanations:
Analogue gauge for engine rated speed
Measurement range: 0-4000 m-1
ZA
582 001 13
582 001 13
582 001 13
582 001 13
582 001 13
582 001 13
NS
-
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
29
Additional gauges
Option: Speedometer (AZ9)
Seite: 1/1 (ID: 156)
Explanations:
Analogue gauge of travel speed
Measurement range: 0-13 km/h, 0-8 miles/h
Speedometer
ZA
582 001 14
582 001 14
582 001 14
582 001 14
582 001 14
582 001 14
NS
-
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
30
Measurement technique
Option: BOMAG Evib meter (BEM) (VM8)
Seite: 1/1 (ID: 170)
Explanations:
Permanent indication of Evib values. Depending on the various soils, dynamic bearing capacities
between 0 and 350 MN/m can be indicated.
Components:
2 acceleration transducers
1 electronic unit
1 analogue display (EVIB-values)
ZA
582 007 30
582 007 30
582 007 30
582 007 30
582 007 30
582 007 30
NS
582 020 01
582 020 01
582 020 01
582 020 01
582 020 01
582 020 01
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
31
Measurement technique
Option: BOMAG Terrameter plus (BTM plus) (VM9)
Seite: 1/1 (ID: 171)
Explanations:
This measuring system controls and documents the compaction process. The measurement size which
is determined and indicated, is the Evib-value in MN/m. Also, the roller operator is informed by a red
light which indicates the end of compaction or that the max. compaction on a determined track has been
achieved.
Components:
2 acceleration transducers
1 speed transducer
1 electronic unit
1 BOMAG Operating Panel (BOP)
ZA
582 007 31
582 007 31
582 007 31
582 007 31
582 007 31
582 007 31
NS
582 020 08
582 020 08
582 020 08
582 020 08
582 020 08
582 020 08
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
32
Measurement technique
Option: Printer (VM10)
Seite: 1/1 (ID: 172)
Explanations:
Printer for BTM plus. The achieved compaction results can be printed with the printer. The printer is only
available as a field kit.
Printer
ZA
-
NS
582 020 28
582 020 28
582 020 28
582 020 28
582 020 28
582 020 28
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
33
Measurement technique
Option: BOMAG Terrameter professional (BTM prof) (VM11)
(ID: 173)
Printer
Explanations:
This measuring system controls and documents
the compaction process. The measurement size
which is determined and indicated, is the Evibvalue in MN/m.
Also, the roller operator is informed by a red
light which indicates the end of compaction or
that the max. compaction on a determined track
has been achieved. The achieved compaction
result can be printed with a printer inside the
cabin.
Components:
2 acceleration transducers
1 speed transducer
1 electronic unit
1 BOMAG Operating Panel (BOP)
1 printer
BOMAG Terrameter
professional (BTM prof)
ZA
582 007 32
582 007 32
582 007 32
582 007 32
582 007 32
582 007 32
NS
582 020 25
582 020 25
582 020 25
582 020 25
582 020 25
582 020 25
Template: 4-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
34
Measurement technique
Option: BOMAG Compaction Management (BCM 05) (VM12)
Seite: 1/1 (ID: 174)
Explanations:
System for surface covering compaction control of the performed compaction work on a construction
site. With the basic version, only a track related data recording is possible.
Scope of delivery:
Mounting for BCM 05 with wiring harness
Can-Bus
Software BCM 05 mobile
Software BCM 05 office
USB stick
BOMAG Compaction
Management (BCM 05)
ZA
582 007 07
582 007 07
582 007 07
582 007 07
582 007 07
582 007 07
NS
582 020 29
582 020 29
582 020 29
582 020 29
582 020 29
582 020 29
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
35
Measurement technique
Option: Preparation BCM 05 for BEM (VM17)
Seite: 1/1 (ID: 175)
Explanations:
This option is the basic requirement for the subsequent retrofit of a BCM 05, if the single drum roller is
only equipped with BEM (VM8).
Content of the option:
Wire harness from the central electrics up to the roof console of the cabin.
ZA
582 007 11
582 007 11
582 007 11
582 007 11
582 007 11
582 007 11
NS
582 020 65
582 020 65
582 020 65
582 020 65
582 020 65
582 020 65
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
36
Measurement technique
Option: Preparation BCM 05 - Holder, Interface but without PC (VM19)
Seite: 1/1 (ID: 176)
Explanations:
With this option, the single drum roller is prepared for work with the BCM 05 so that only a PC, which is
not included in this option, has to be placed in the cabin.
Content of the option:
PC holder
Interface
ZA
582 007 12
582 007 12
582 007 12
582 007 12
582 007 12
582 007 12
NS
582 020 66
582 020 66
582 020 66
582 020 66
582 020 66
582 020 66
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
37
Explanations:
For compaction of cohesive soils; the 3-shellsegments are placed onto the smooth drum and
bolted to it. Conversion of the drive wheels
from diamond tread tyres to tractor tread
tyres is recommended.
ZA
582 003 00
582 003 00
582 003 00
NS
582 020 52
582 020 52
582 020 52
Template: 4-1-1
BW 211 D-40
BW 212 D-40
BW 213 D-40
Technical data:
BW 211 - 213: 1300 kg; shell thickness: 6 mm;
feet: 150 pcs., height: 84 mm, 99 cm
Date:
Page:
19.06.2006
38
Explanations:
The thicker drum increases the operating weight of the machine by 700 kg and thus increases the
lifetime of the drum with compaction of highly abrasive soil materials.
35 mm drum
ZA
582 003 50
NS
-
Template: 1-1-1
BW 212 D-40
Date:
Page:
19.06.2006
39
Explanations:
The front frame as well as the rear frame of various single drum rollers can be ballasted. Herewith, the
total weight of the machine is increased. Advantage of ballasting the front frame is a higher static linear
load. The ballast of the rear frame increases the gradeability of the single drum roller.
Additional weight
front frame
700 kg
Additional weight
ZA
582 001 46
582 001 46
NS
-
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
Date:
Page:
19.06.2006
40
Explanations:
The front frame as well as the rear frame of various single drum rollers can be ballasted. Herewith, the
total weight of the machine is increased. Advantage of ballasting the front frame is a higher static linear
load. The ballast of the rear frame increases the gradeability of the single drum roller.
Additional weight
front frame
600 kg
Additional weight
ZA
582 001 63
582 001 63
NS
-
Template: 1-1-1
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
41
Explanations:
Increases the available amplitudes and centrifugal forces of the machine
Single drum roller
Amplitude
in mm
Centrifugal forces
in kN
1,80 / 0,90
236 / 170
2,20 / 1,10
276 / 198
1,80 / 0,90
236 / 170
2,20 / 1,10
276 / 198
ZA
582 001 34
582 001 34
NS
-
Template: 1-1-1
BW 211 D-40
BW 212 D-40
Comment
Date:
Page:
19.06.2006
42
Explanations:
Increases the available amplitudes and centrifugal forces of the machine.
For the BW 212 D-40, this option is only available together with the option: 35 mm drum (B3).
Machine
Amplitudes
in mm
1,80/0,90
2,00/1,00
Centrifugal
forces in kN
236/170
310/222
1,64/0,82
1,84/0,92
275/202
310/222
1,80/0,90
2,00/1,00
275/198
310/222
1,64/0,82
1,84/0,92
275/202
310/222
Higher amplitude
ZA
582 001 36
582 001 36
582 001 36
582 001 36
NS
-
Template: 1-1-1
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Comment
Date:
Page:
19.06.2006
43
Explanations:
2 adjustable plastic contact scrapers (inclusive mounting set) for application on sand and highly
cohesive soils.
ZA
582 008 05
582 008 05
582 008 05
NS
-
Template: 1-1-1
BW 211 D-40
BW 212 D-40
BW 213 D-40
Date:
Page:
19.06.2006
44
Tyres
Standard: Diamond tread tyres
Seite: 1/1 (ID: 177)
Explanations:
For detailed dimensions please refer to the technical data specs of the respective machine.
Standard equipment for all D-40 single drum rollers.
ZA
-
NS
-
Template: 1-1-1
BW 211 D-40
BW 212 D-40
BW 213 D-40
Date:
Page:
19.06.2006
45
Tyres
Option: Tractor tread tyres (T6)
Seite: 1/1 (ID: 178)
Explanations:
Tractor tread tyres are of advantage if particular high traction and less the surface quality is of
importance.
Standard equipment for all PD-40 single drum rollers.
ZA
580 006 22
580 006 22
580 006 22
NS
-
Template: 1-1-1
BW 211 D-40
BW 212 D-40
BW 213 D-40
Date:
Page:
19.06.2006
46
Tyres
Option: Tyre ballast (T28)
Seite: 1/1 (ID: 179)
Explanations:
The tyre ballast increases the operating weight of the single drum roller by 800 kg (2 x 400 kg).
The tyre filling is a MgC12-water-mixture with following weight proportions:
88 kg MgC12 and 312 l water.
The field kit includes 2 wheels with rims and diamond tread tyres.
Tyre ballast
ZA
580 006 21
582 006 21
NS
-
Template: 1-1-1
BW 211 D-40
BW 212 D-40
Date:
Page:
19.06.2006
47
Bio oil
Option: Bio-degradable hydraulic oil (HY2)
Seite: 1/1 (ID: 149)
Explanations:
Type: Panolin HLP Synth 46 (synthetic Ester with additives)
Degradability: biologic degradable (CEC 1-33-T-82), >80% (average)
Water contamination class: WGK=0
Flash point (COC): 221C
Pour point: -58C
Specific density: 0,921 g/ml
Viscosity (40C): 48,7 mm/s
Viscosity (100C): 8,7 mm/s
Water solubility: insoluble
Toxicological information:
This product contains no substances which may be considered hazardous to health in its given
concentration. Health risks are not known or expected under normal use. This option is only offered as
factory kit ex works. A subsequent filling of the machine with bio oil requires extensive flooding of the
hydraulic oil circuit and may involve considerable higher cost.
ZA
582 004 80
582 004 80
582 004 80
582 004 80
582 004 80
582 004 80
NS
-
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
48
Explanations:
All standard "YELLOW" machine parts are painted outside in one special colour.
YELLOW: drum frame, articulated joint, engine hood and rims.
ZA
582 008 94
582 008 94
582 008 94
582 008 94
582 008 94
582 008 94
NS
-
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
49
Explanations:
All standard "YELLOW" and "GREY" machine parts are painted outside in one special colour.
YELLOW: drum frame, articulated joint, engine hood and rims
GREY: rear frame, drum side parts, operator's platform
ZA
582 008 95
582 008 95
582 008 95
582 008 95
582 008 95
582 008 95
NS
-
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
50
Explanations:
All "YELLOW" cabin parts are painted in one special colour.
YELLOW: cabin inside and outside
ZA
582 008 92
582 008 92
582 008 92
582 008 92
582 008 92
582 008 92
NS
-
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
51
Explanations:
All standard "YELLOW" and "GREY" machine parts are painted outside in the respective special colour.
YELLOW: drum frame, articulated joint, engine hood and rims
GREY: rear frame, drum side parts, operator platform
ZA
580 008 96
580 008 96
580 008 96
580 008 96
580 008 96
580 008 96
NS
-
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
52
Explanations:
A towing hitch can be mounted only in the front of the front frame.
The towing force allowed for this hitch corresponds to the basic weight of the single drum roller.
The towing hitch is only available as field kit.
Type: SK5A
ZA
-
NS
582 020 86
582 020 86
582 020 86
582 020 86
582 020 86
582 020 86
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
53
Explanations:
The fire distinguisher is only available as field kit.
Type:
PU2S (ABC powder)
Manufacturer:
Minimax
Extinguisher substance: EURO-TROXIN
Fire distinguisher
ZA
-
NS
580 022 18
580 022 18
580 022 18
580 022 18
580 022 18
580 022 18
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
54
Explanations:
The tool set is prepared for repairs on Deutz engines. The tool set is stored in a shelf behind the seat.
This shelf has a lockable lid on single drum rollers with railing and sun roof or ROPS / FOPS. This option
is only available as field kit.
Content of the tool set:
1 x tool bag
1 x Torx double ring spanner E6 x E8
1 x Torx double ring spanner E10 x E12
1 x Torx Nut 850 S-E8
1 x Torx Nut 850 S-E10
1 x Torx Nut 880 S-E10
1 x Torx Nut 880 S-E12
1 x Torx Nut 900 S-E12
ZA
-
NS
008 399 15
008 399 15
008 399 15
008 399 15
008 399 15
008 399 15
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
55
Explanations:
Protects the machine against unauthorized use.
The single drum roller is ready for operation in 30 seconds after entering a 6-digit safety code.
The basic safety code is securely stored at BOMAG.
The keyboard is attached at the rear wall inside the cabin.
ZA
582 008 81
582 008 81
582 008 81
582 008 81
582 008 81
582 008 81
NS
-
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40
Date:
Page:
19.06.2006
56
Explanations:
Enables the start at low temperatures up to -25C. Without the winter package, starting is only possible
up a temperature of -10C.
The option includes:
heating flange in the engine
2nd battery
additional thermostat in the hydraulic circuit
heating in fuel filter
Winter package
ZA
582 002 09
582 002 09
582 002 09
582 002 09
582 002 09
582 002 09
NS
582 020 63
582 020 63
582 020 63
582 020 63
582 020 63
582 020 63
Template: 1-1-1
BW 211 D-40
BW 211 PD-40
BW 212 D-40
BW 212 PD-40
BW 213 D-40
BW 213 PD-40