Académique Documents
Professionnel Documents
Culture Documents
TUTORIAL 2
CHAPTER 2- Single Phase Circuits
1.
2.
3.
4.
5.
If
a)
b)
c)
6.
(7.12A, 44.59 )
7.
8.
afz03
9.
10.
11.
A circuit with three branches having single resistor, inductor and capacitor
respectively are connected in parallel across a 100 V, 50Hz supply. By
considering R= 10, L=0.1H and C=100F; Calculate
a) The current in each branch
b) The supply current
c) The phase angle between the supply current and the supply voltage
(10A, 3.18A, 3.14A, 10A, -0.229 )
12.
13.
A 130 resistor and a 30F capacitor are connected in parallel across a 200V,
50 Hz supply. Calculate:
a) The current in each branch
b) The resultant current
c) The phase difference between the resultant current and the applied voltage
d) The power factor
e) The phasor diagram
(1.54A, 1.89A, 2.43A, , 50.83 , 0.63 leading)
14.
afz03
15.
16.
(0.625A & 0.943 A, 1.13 A, 56.38 leading,8.85 , 6.25W, 11.3 VA, 0.55 leading)
17.
18.
In the circuit shown, a load having and impedance of 39 + j26 is fed from a
voltage source through a line having an impedance of 1 + j4. The effective, or
rms, value of the source voltage is 250V.Calculate
a) The load current and load voltage
b) The average and reactive power delivered to the load
c) The average and reactive power delivered to the line
d) The average and reactive power supplied the sources.
( 5 -36.87 A & 234.36 -3.18 V, 975W & 650 VAR, 25W& 100VAR, 1000W & 750VAR)
19.
A single-phase motor takes 30A at a power factor of 0.65 lagging from a 240V,
50 Hz supply. Calculate:
a) The current taken by the capacitor connected in parallel to correct the
power factor to unity
b) The value of the supply current after power factor correction
(22.80A, 19.5A)
afz03
20.
afz03