Académique Documents
Professionnel Documents
Culture Documents
4. Then click CONFIGURATION > DEVICE MANAGEMENT > DEVICE CONFIGURE >
add GPS
5. Choose COM Port by see the information on Device Manager then click OK
2013-04-16
Page19, Total25
7. Then click
to connect the device (LTE MODEM & GPS), see the state:
CONNECTED
2013-04-16
Page20, Total25
SYSTEM
BROWSE,
11. Then match the Probe parameter with the excel parameter
2013-04-16
Page21, Total25
12. Open the FILEZILLA 3.6 for ftp Download test, input the connection blow:
Host
: 10.1.12.149
Username : admin
Password
: admin
Port
: (none)
After input, click QUICKCONNECT, then choose 2 file on the right table:
1G_DL_1_from_149
1G_DL_2_from_149
After choose this 2 files, right click then click DOWNLOAD > ADD FILES TO
QUEQUE (click many times), then check the DU METER for the Download
throughput. Make sure that the throughput is up.
OPEN 3 FILEZILLA at the same time to get the maximum throughput
2013-04-16
Page22, Total25
13. For the UPLOAD test, the procedure almost same, but the differences is: choose file
on the left side (Laptop hard drive) then, choose 2 FILE below:
1G_DL_1_from_149
1G_DL_2_from_149
After choose this 2 files, right click then click UPLOAD > ADD FILES TO QUEQUE
(click many times), then check the DU METER for the UPLOAD throughput. Make
sure that the throughput is up.
OPEN 3 FILEZILLA at the same time to get the maximum throughput
2013-04-16
Page23, Total25
15. To view the RF parameter, click :VIEW (on the toolbar) > LTE > RADIO
PARAMETERS
2013-04-16
Page24, Total25
18. For REPLAY the logfile, choose Logfile >open logfile, then select the datafile to be
displayed. Click
on the toolbar in tehe main window. During the replay, you can
2013-04-16
Page25, Total25