Académique Documents
Professionnel Documents
Culture Documents
Revit Architecture
Presentation Of Revit Architecture
Introduction, Interface, Walls & Curtain Wall, Roof
Floor, Stairs, Ramp and Ceiling
Present by:
Mukesh Gupta
What Is Bim?
What is Interface?
Application Menu
Application menu which
is provided the common
file action as New, open
the file and save, and other
option also be provide the
option as Export and
Publish.
Application Menu
Info Center
Info center feature is used in Auto-desk Products. It's
tool set on the right side in tittle bar. that is provide us
information with related product sources.
Option Bar
The option bar is vested blew at the ribbon. Option
bar provided the sub tool of selected tools and get's
the information of element.
Type Selector
Type selector gets in property
palette, which is provide the
placing element on active
element that you want. Type
selector display at the top of
palette .
Properties Palette
Properties palette is mode-less dialog box that is
provided me view and modify, property palette give
the information of selected element, if you want any
changing of element so can to do, and you can
modify the element such as you want. If you want
the show the project palette on work place, so you
select the view and select user interface then
select the project browser
Project Browser
Project Browser is a most important in
revit that is show the logical
information history of all view,
schedule, site, family, groups level,
grid, and other part of current project. If
you want the show the project palette on
work place, so you select the view
and select user interface then select
the project browser.
Status bar
Status bar is located in the bottom of application
window, it is provided when are you select a tool, the
left side status bar hint or highlight the tips what to
do.
and you can see when you are open the large file then
progress bar indicate in the status bar.
c
Drawing Area
We are work this place that is called the drawing area
in revit. Drawing area show the current project and see
the view as you want, drawing area provided we, that
project which as show in view.
Ribbon
Ribbon display provided the when you create or open
a file. It's provided the all tools and family which we
want to see, Ribbon show the all tool in work place.
This feature allow the all buttons to be visible.
Rotating
Rotate command which place you can apply such as
you can rotate the any object, so you can select the
object and select the rotate command and give the
angle and rotate the element.
Basic Walls
Basic walls means brick wall, curtain wall and
stacked wall( brick over cmu with metal stud), that
object family also difference difference type and it's
use also difference type.
Curtain wall
Store front
Modifying Walls
If you want the any walls
to modify so you can
select the walls and go to
property panel and select
the edit option and you
can modify the wall
property, and you want the
one wall modify so can
make the duplicate profile
and repeat the same
process.
Editing Profiles
If you want the any editing
of the element so you can
select the object and go to
editing profiles and you can
edit the
element his
according. Or you can edit
the object of property panel,
edit profile use the mostly
few objects such as walls
and curtain wall and some
other element
Cutting Openings
Cutting opening to define in revit such as model for
ducts, pipe, cable, troys and any things, but
Architecture engineers and structure engineers firstly
check the review then create the approved hole.
Suitably open the project designs and automatically
based of location.
Swapping Walls
If you want the designs of wall, so you can apply the
sweeping it's provided we to designed the interior wall
or designed in the wall. If you want the make a family
of sweep wall, so you can select the application bar
then select the new and open the family then select the
reference line and make the profile of sweep walls.
Revealing Walls
If you want the designs of exterior wall, so you can
apply the revealing wall, it's provided we to designed
the exterior wall or designed on the wall. If you want
the make a family of reveal wall, so you can select the
application bar then select the new and open the family
then select the reference line and make the profile of
reveal walls.
Curtain Grids
When we are use the curtain
wall, then firstly make some
grid and apply the mullion
on the grid then you can
create a curtain wall.
Curtain wall mostly use the
office and society to make a
doors and window and other
things.
Adding Mullions
When you are make curtain wall then you can apply
the
Mullion mostly mullion use on the grid and make a
curtain wall, if you want the modify the mullion so
you can use the property panel and select the mullion
then modify it.
Types Of Roofs
Types Of Roofs
Mansard Roof:- This type roof is called a French
style roof. It's roof is made up four slopes, two slope
on each side of building and the lower slope is sleeper
and vertical slope is upper slope.
Gambrel Roof
This type roof identical to the mansard roof but the
core is very difference that the gambrel roof upper
slope is positioned at the shallow angle. This type of
roof is Dutch-inspired instead of french roof.
Saltbox Roof
It's my favorites roof, this is looks so interesting from
the exterior. That is an Asymmetrical large and pitch
roof, it is one side short and one side is very long
side. Often time we see the building that is height is
one floor or not maintain the multistory building.
Pyramid Roof
Such as the name suggests it is type of roof that is
contract like a pyramid, we appears the many
difference portion of this roof. This type roof is
shaped used on a small structure, such as pool house.
Hip Roof
It's roof is very equal to the pyramid roof, that is main
difference instead of coming to four side meet at ridge
or a flat spot like this pyramid roof, that is
architecture more designer at designing.
Bonnet Roof
It is same like to the pyramid roof or hip roof is
difference such as you can see the blew of bottom,
that is provided the two sliders slopes out an angle.
The most important purpose that is see the cover a
veranda or outside porch.
Flat Roof
It's very simple and easy to identify roof which is
almost level in contrast to the many types of roof,
that is used the Indian people almost. The benefits of
flat roof include the easier to construct, flat roof are
ancient from mostly used in arid that is approach to
10.
Arched Roof
This type roof is like arc shapes and arc roof is
typically only used on a portion of the building such
as given the bottom but the architecture is not like it
that is not beautiful house design that is like at a
shapes and adds a great aesthetic touch the
architecture of the building.
Skill-ion Roof
Hip roof and gabled roof to make at least two
slopping
Side roof which provided the single sloping roof
surface, you can think of it as a flat roof that has
include it often used on just a portion of the home.
Architecture modern option is to use the skill-ion
roof.
Sloped Arrows
When you are create a roof then you can make a slope
arrow, slope arrows also make a roof but that is make
it's project are very difference that like roof. Slope
arrows create a slop on a roof such as you can create a
sloped surface using a slope.
Extruded Roofs
You can create a extruded roof by sketch, you can
see the project in 3d or any view panel or section.
You can click the Architecture panel and select the
extruded roof in roof tools, it is make like a zigzag
line and then can select the wall and attach the
extruded roof.
Stairs
Stairs also most important element in Architecture Revit,
stairs is a then applied complete fight of step between
two floors. Many steps is most important in stairs such
as:Tread:-Part of stairs way that is stepped on, tread is also
measure the outer edge. Such as two riser step.
Riser:-When we are create a sketch stairs then you make
riser, vertical portion between two tread on stairs.
Stairs Landing
When you are make a stairs then you can make a
landing on stairs and this is depend on you, how can
you make landing. Landing is compulsory in stairs, so
you can make a landing which place to need them.
You can make landing on straight stairs. Landing is
not available in spiral. It's get up in some stairs such
as U Type and L Type.
Railing
The main important tools is also railing. If you want to
modify the blaster so you can select the load family
then blow it:Load Family
Railing
Blaster
Glass
Blaster
If you want to add blaster on railing, so you can select
the railing and click the edit type and make a blaster
setting.
Ramps
Ramp are very important in revit that is provide to create a
ramp on place floor by floor, if you want the draw a ramp,
so you take carefully suggestion and fallow me:When you are create a ramp then you can select the roof
and give the offset ten feet outside, then select the modify
sub element and give the height of ramp. Then you can
select the modal in place and click the wall and select the
set tool and select the wall mouth then you can select the
sweep blend and you can select the path of ramp. You can
select the profile-1 and select the show and viewer and
create a rectangle then finish, now you can repeat the
command of profile-2. You can select the void and then
select the cut option.
Ramps
That command repeat the second wall for cut.
Designing Ramps
If you want to designing ramp, so you can select the
ramp and create design then you apply the texture
paints and materials and other things as you want.
You can make a design such as circular and straight
or you can make design (Center-ends Arc) point also.
Adding Families
If you want the make a family of any element, so you
can click the application bar and select the,
New
`
Family
Profile then you can
create a family which you want, you can need to select
the category name of family and select the project.
Then you can work at project family.
Mullion Family
When you are create Mullion family then you can
need to careful and you can select the new and then
select the family and then select the profile, now you
can take a reference line that height 6 inch and width 3
inch. You can able to create a family now you can take
a line and create it. then give the category and select
the project.
Sweep Family
Such as you create a mullion family same you can
create a sweep family it is make in the wall, now you
select the family and create the sweep name and take
a reference line and you can create a line which
height 1 feet and width 6 inch then you can give
category and select the project. Now you can set on
the wall.
Reveal Family
Such as you create a mullion family same you can
create a reveal family it is make on the wall, now you
select the family and create the reveal name and take
a reference line and you can create a line which height
1 feet and width 6 inch then you can give category
and select the project. Now you can set on the wall.
Walls Family
Such as you are create family same you can create
wall family, select the family then click the reference
line and you can make wall family. You can apply the
materiel and texture, style then you can select the
category of the wall and set the texture. Now you can
select the project.
Gutter Family
If you want the make gutter family of any element,
so you can click the application bar and select the,
New
`
Family
Profile then you can
create reference line then create gutter family which
you want, you can need to select the category name
of gutter family and select the project. Then you can
work at project family.
Section Box
Finish click
User interface
keyboard shortcut