Académique Documents
Professionnel Documents
Culture Documents
Session 2015-16
Assignment No-6
Statement
Year
Marks
2015
10
2012
10
2015
10
2014
10
2009
10
Page 1 of 2
Session 2015-16
Design a connecting rod for 4 stroke petrol engine with the following data :
Piston diameter = 0.20 m; Stroke length = 0.30 m
Length of connecting rod (centre to centre) = 50 m
Weight of reciprocating parts = 50 N
Speed is 1440 rpm with possible over speed of 3000 rpm
Compression ratio = 3:1
Maximum explosion pressure = 3 MPa
Design a connecting rod for a Petrol Engine from the following data :
Diameter of piston = 110 mm
Mass of reciprocating parts, m = 2 kg
Length of connecting rod, l = 325 mm; Stroke = 150 mm
Compression ratio = 4:1
Speed = 1500 rpm with possible over speed of 2500 rpm
Maximum explosion pressure = 2.5 MPa
Design a Cast Iron Piston for a single acting four stroke engine for following data:
Cylinder bore = 90 mm
Stroke = 120 mm
Maximum gas pressure = 5 N/mm2 ; Mean effective pressure = 0.75 N/mm2
Mechanical efficiency = 80%
Fuel consumption = 0.2 Kg per Brake power per hour
Higher Calorific value of fuel = 43 x 103 kJ/Kg
Speed = 2000 RPM
Any other data required for the design may be assumed.
The cylinder of a slow speed steam engine is 250 mm diameter and the steam
pressure 1 N/mm2 .The piston rod length is 1000 mm and the connecting rod is 1.2
m long. The engine stroke is 550 mm. Determine the dimensions of the cross section
of the connecting rod assuming the depth to be twice as thickness and a suitable
diameter for the piston rod.
2014
10
2013
10
2013
10
2012
10
Page 2 of 2