Académique Documents
Professionnel Documents
Culture Documents
(2) Only use the Ethernet port on your modem. If you were using the USB connection before
using the router, please disconnect the USB cable and connect the Ethernet cable to the WAN port
of the router.
(1) Power on your router and computer , then open the web browser and type the LAN IP
address of the wireless router in the address bar (default is 192.168.1.1). Press [Enter] key.
(2) Type the username and password in the login window (the default username and password
are bothadmin), then click OK.
Step 4 After log into the router, Click Network->MAC Clone on the left side.
Step 5 Click Clone MAC Address to clone your PCs MAC address to WAN MAC Address of the
router.
If your ISP provides static IP address for you, please select Static IP as the WAN Connection
Type, otherwise select Dynamic IP to get IP address automatically from your ISP.
Static IP:
Enter the IP information provided by your ISP into the boxes shown as below, then
click Save button. Wait about 2 minutes, if you cant connect to the Internet, please skip to the
Step 9.
Dynamic IP:
Select Dynamic IP as the WAN Connection Type on the right of the web page, shown as below.
Then clickSave button.
Click Status on the left side. Under WAN section, click Renew button. Wait about 2 minutes, then
an IP address will be assigned. If it doesnt get an IP address or time out, skip to Step 9.
If your router is a wireless router, you need to configure the wireless settings for your wireless
network. Then continue with Step 9.
Repeat the steps 1-3 above until you connect to the Internet.
Note:
In some cases, we need to change the LAN IP address of TP-LINK Router to avoid the
IP collision with the Cable modem.
Related article:
How to configure TCP_IP Properties for my computer to connect to TP-LINK wireless router
How do I check if the IP address of my computer is correct
How do I reduce the MTU Size of my TP-LINK Wireless Router
How do I clone the MAC Address for my TP-LINK Wireless Router
How do I configure the basic wireless settings for my TP-LINK Wireless Router