Académique Documents
Professionnel Documents
Culture Documents
Bachelor of Engineering
In
Electronics and Telecommunication Engineering
by
Prof. S. S. Salankar
CO-Guide
April 2016
Bachelor of Engineering
In
Electronics and Telecommunication Engineering
by
Prof. S. S. Salankar
CO-Guide
April 2016
Declaration
We, hereby declare that the project report titled STAMPING MACHINE USING
PLC submitted herein has been carried out by us in THE COTMAC ELECTRONICS
PVT.LTD PUNE towards partial fulfillment of requirement for the award of degree Bachelor of
Engineering in Electrical Engineering. The work is original and has not been submitted earlier as
a whole or in part for the award of any degree / diploma at this or any other Institution /
University.
We also hereby assign to G. H. Raisoni college of Engineering, Nagpur all rights under copyright
that may exist in and to the above work and any revised or expanded derivatives works based on
the work as mentioned. Other work copied from references, manuals etc. are disclaimed.
Place: Nagpur
Date:
NIKITA ITANKAR
APURVA SHIRBHATE
NIHARIKA RAGHUVANSHI
Certificate
The project report titled STAMPING MACHINE USING PLC submitted by Nikita
Itankar, NiharikaRaghuvanshi, ApurvaShirbhatefor the award of degree of Bachelor of
Engineering in Electronics and Telecommunication Engineering has been carried out under our
supervision. The work is comprehensive, complete and fit for evaluation.
Co-Guide
Guide
Dr. M. M. Khanapurkar
Prof. K. D. Joshi
Dr. PreetiBajaj
Head,
In-charge,
Projects
Director,
GHRCE, Nagpur
Acknowledgment
I would like to thank our dissertation guide, prof. S.S.Salnkar and Co-guide Mr. Sanjay
Mishra for their many suggestion, generous help and constant support during our company
research.
The most essential part of good project development is sound idea and proper assistance which
we got from our efficient guide. With deepest sense of esteem and gratitude I express our sincere
thanks to prof. S.S.Salnkar, Dr. M. M. Khanapurkar, Prof. K. D. Joshi
under whose guidance I became able to learn a lot and successfully completed our dissertation in
technical project work most efficiently. This work is reflection of his thoughts, idea and concept
without which my project work would not have turn into reality.
Our sincere thanks are extended to Dr. Preeti Bajaj Principal G.H.R.C.E.Nagpur for constantly
encouraging and helping during course of this project.
I am also thankful to all the members of Electronics and Telecommunication Engineering
Department who conducted seminars to boost our work and took care of our work which was
most helpful for us directly or indirectly. At least, I am grateful to all my colleagues of this
project.
NIHARIKA RAGHUVANSHI
APURVA SHIRBHATE
NIKITA ITANKAR