Académique Documents
Professionnel Documents
Culture Documents
ID
37128
Products
Safety Products
Guard PLC
GuardLogix (1756)
RSLogix Guard Plus
Category (optional)
General
Date Created
11/20/2006
Page 1 of 4
Last Updated
11/20/2006
Access Level
Everyone
Prev. TN#
G44849592
GuardPLC Platform
Series A CPU FW
1.04 [1200]
Series A CPU FW
1.04 [2000]
Initial Release
Series A COM FW
1.00 [1200]
RSLogixGuard
Project Mgr 3.3 Build 4903
Hardware Mgr 2.2.12
Series A COM FW
1.00 [2000]
Series B CPU FW
2.04 [1200]
Series B CPU FW
2.04 [2000]
Series B COM FW
2.80 [1200]
Series B COM FW
2.80 [2000]
Series C CPU FW
4.32 [1200]
Series C CPU FW
4.32 [2000]
http://rockwellautomation.custhelp.com/cgi-bin/rockwellautomation.cfg/php/enduser/prnt... 14/03/2007
GuardPLC 1200, GuardPLC 1600, GuardPLC 1800 and GuardPLC 2000 Processor Hard...
Page 2 of 4
Series C COM
FW 4.24 [1200]
Series C COM
FW 4.24 [2000]
GuardPLC 1600/1800:
RSLogixGuard PLUS!
Project Mgr 3.5 Build 6817
Hardware Mgr 4.0.26
Series A CPU FW
4.32
Series A COM FW
5.14
GuardPLC DIO:
FW 4.28
Series C CPU FW
6.12 [1200]
Series C CPU FW
6.12 [2000]
Series C COM
FW 8.32 [1200]
RSLogixGuard PLUS!
Project Mgr 4.0 Build 6104
Hardware Mgr 6.56.0
Series C COM
FW 8.32 [2000]
Series B CPU FW
6.12
Series B COM FW
8.32
GuardPLC DIO:
FW 6.12
GuardPLC 1200/2000:
Series C CPU FW
6.28 [1200]
Series C CPU FW
6.28 [2000]
Series C COM
FW 8.32 [1200]
Series C COM
FW 8.32 [2000]
GuardPLC 1600/1800:
http://rockwellautomation.custhelp.com/cgi-bin/rockwellautomation.cfg/php/enduser/prnt... 14/03/2007
GuardPLC 1200, GuardPLC 1600, GuardPLC 1800 and GuardPLC 2000 Processor Hard...
FW 6.28
Page 3 of 4
The combination of RSLogix Guard PLUS, GuardPLC firmware, and DIO firmware according to
table 1 is the best choice.
When other combinations are used, you will not have access to certain functional upgrades.
Detailed Version Compatibility
CPU/COM (platform)
DIO
RSLogixGuard PLUS!
Version
Compatible?
N/A
Yes
N/A
Yes
N/A
No
N/A
No
4.28
Yes
4.28
Yes
No
No
4.28
Yes *
6.12
Yes *
6.28
Yes
4.28
Yes*
6.12
Yes*
6.28
Yes
6.12
Yes*
6.28
Yes
+
+
DISCLAIMER
This knowledge base web site is intended to provide general technical information on a particular
subject or subjects and is not an exhaustive treatment of such subjects. Accordingly, the
information in this web site is not intended to constitute application, design, software or other
professional engineering advice or services. Before making any decision or taking any action,
which might affect your equipment, you should consult a qualified professional advisor.
http://rockwellautomation.custhelp.com/cgi-bin/rockwellautomation.cfg/php/enduser/prnt... 14/03/2007
GuardPLC 1200, GuardPLC 1600, GuardPLC 1800 and GuardPLC 2000 Processor Hard...
Page 4 of 4
http://rockwellautomation.custhelp.com/cgi-bin/rockwellautomation.cfg/php/enduser/prnt... 14/03/2007