Académique Documents
Professionnel Documents
Culture Documents
Description
Synthetic lubricating oil for state-of-the-art petrol and light diesel engines. It has important fuel
saving properties (fuel economy). Specially designed for Ford vehicles.
Properties
Quality level
Its fuel saving properties allow lower consumption, depending on the form of driving.
It complies with the Ford WSS-M2C913C specification (which substitutes Ford
specification WSS-M2C913-A/B).
Its level of viscosity facilitates cold ignition, maintaining perfect lubrication by minimising
wear.
Excellent resistance to oxidation and high thermal stability, which assures engine cleanliness
ACEA A5/B5
Ford WSS-M2C913-C
Technical characteristics
SAE GRADE
Density at 15C
Viscosity at 100C
Viscosity at 40C
Viscosity at -30C
Viscosity rate
Flash point, open cup
Pour point
Sulphated ashes
Bosch Injector Shearing:
Viscosity at 100C after shear
Noack volatility, 1hr at 250C
UNIT
METHOD
g/ml
cSt
cSt
cP
C
C
% in weight
ASTM D 4052
ASTM D 445
ASTM D 445
ASTM D 5293
ASTM D 2270
ASTM D 92
ASTM D 97
ASTM D 874
VALUE
5W30
0.852
9.8
53
6600 max
70
210 minimum
-36
0,7
cSt
CEC L-14-A-93
9.3 minimum
% in weight
CEC-L-40-93
13 maximum
Available in
LUBRICANTS
COSMOS F
FUEL ECONOMY 5W30
Hazard identification
Handling
Minimum precautions should be taken to avoid prolonged contact with the skin. The use of gloves,
visors or glasses is recommended to avoid splashes.
Inhalation: Given that it is not a particularly volatile product, the risk of inhalation is minimal.
Ingestion: Do not induce vomiting. Provide water. Seek medical advice.
Contact with the skin: Wash with plenty of water and soap.
Eyes: Wash with plenty of water.
General measures: Seek medical advice.
Firefighting measures
Environmental precautions
Danger of physical pollution if spilt (watercourses, coastlines, soil, etc.) due to its floatability and
oily consistency that may harm flora and fauna on contact. Prevent the material from entering
water outlets.
Decontamination and cleaning: Treat like an accidental oil spill. Prevent dispersion using
mechanical barriers and remove by physical or chemical means.
LUBRICANTS