Académique Documents
Professionnel Documents
Culture Documents
MERCURY
FLOW PRESSURE
GAS ANALYSIS
ACCESSORIES
EQUIPMENT CATALOG
Website: www.apexinst.com
919-557-7300 or 800-882-3214
Contact: info@apexinst.com
Fax: 919-557-7110
www.apexinst.com
INTRODUCTION
Catalog Contents Overview
ISOKINETIC SAMPLING EQUIPMENT
Isokinetic Meter Consoles
Pumps, Method 5 Probes, Liners
Nozzles, Umbilicals, Sample Lines
Glassware & Accessories
Method Equipment Illustrations
SAMPLE RECOVERY/ANALYTICAL
Filter Media, In-Stack Thimbles
Balances, Brushes, Bottles
Drying Agents and Accessories
APPENDIX
Conversion Factors
Equations
Nomenclature
INDEX
Alphabetical Product Listing
Acid Plants
Asphalt Plants
Boilers
Cement Plants
Chemical Manufacturing
Furnaces
Incinerators
800-882-3214 /919-557-7300
Incinerators
Municipal Waste Combustors
Petroleum Reneries
Power Plants
Pulp and Paper Mills
Smelters
Steel Mills
www.apexinst.com
XC-522
XC-5000
XC-40
ISOKINETIC CATALOG
Website: www.apexinst.com
919-557-7300 or 800-882-3214
Contact: info@apexinst.com
Fax: 919-557-7110
www.apexinst.com
The Apex AutoKinetic Method 5 sampling system offers modular components that
can be arranged and re-arranged to perform multiple U.S. EPA Reference Methods.
Select from manual or automated meter consoles, as well as a wide range of heated lter
and impinger boxes, heavy-wall glassware with unground o-ring ball joints, probes built to
customer specied lengths, new designs for umbilical cords, and custom modications
to meet your unique needs.
Meter Consoles............................................ 5 - 9
Sample Pumps ............................................11
Nozzles & Nozzle Accessories ....................... 12, 15
Probes, Liners, Sheaths & Accessories..........16 - 18
Modular Sample Case Assemblies
Filter Ovens, Impinger Cases, Risers .............19 - 21
Glassware, Adapters & Impingers ..................22 -31
Umbilical Cords, Sample Lines
Method 4, Method 5 ....................................32 - 40
Method 8, Method 17
Method 23.....................................................41 - 44
XC-5000 Autokinetic Sampler Console (page 6): Obtain quick, accurate results
with this fully automated isokinetic sampler. Calculate stack traverse points, optimal
nozzle diameters, and sample ows without operator assistance. Take advantage of
modular components to satisfy multiple U.S. EPA Reference Methods.
XC-500 Series Sampling Console (page 8): Climbing up and down the stack
just got easier with this rugged yet lightweight isokinetic metering console
equipped with side handles and an optional shoulder strap.
XC-572 Source Sampling Console (page 10): Capture metric isokinetic readings
easily with this metric version of the XC-522.
XC-522 Source Sampling Console (page 11): Cut costs with this full-feature
yet economically priced manually operated isokinetic sampling console.
XC-40 Source Sampler Console (page 12): This durable, lightweight console is
ideal for EPA Method 4 and can be used with standard impingers & accessories
to collect and analyze moisture content of gases.
Appendix .......................................................66-70
Vance Jones
Domestic Sales / Customer Service
vjones@apexinst.com
Janet Nichols
Sales Manager
jnichols@apexinst.com
Mick Zulpo
Director of Sales & Marketing
mzulpo@apexinst.com
Doug Bernhardt
Sales / Customer Service
dbernhardt@apexinst.com
John Stauber
International Sales
john@apexinst.com
ACCESSORIES
APPENDIX
INDEX
AutoKinetic
The
TM
Glassware, page 23 - 29
Nozzles, page 13 - 14
Umbilicals, page 33
Consoles, page 4 - 11
Pumps, page 12
Apex Isokinetic Source Sampling Systems are rugged versatile equipment designed for
extracting a representative ue gas sample from a source to determine particulate & toxic
emissions in accordance with U.S. EPA Reference Methods as published in CFR 40 Part 60
Appendix A. Choose between automated or manual systems.
ISOKINETIC METHODS
VERSATILE SYSTEM DESIGNS FOR MULTIPLE METHODS
Method 5
Flexible Arrangement
CHOOSE A PUMP
Choose an external pump that suits your specic
conditions and desired ow rates.
NEED ASSISTANCE?
We are never more that a phone call away during normal business
hours, and would be glad to help answer any questions you may have.
METHOD 5 (Deluxe-Plus)
METHOD 5
METHOD 17
Particulate Emissions by In-Stack Filtration - Add an in-stack lter assembly and
longer pitot tip to a Method 5 system. The Apex Instruments Method 17 Sampling Kit is a
convenient package for sampling particulate matter.
METHOD 17
800-882-3214 / 919-557-7300
www.apexinst.com
ISOKINETIC METHODS
VERSATILE SYSTEM DESIGNS FOR MULTIPLE METHODS
METHOD 23
Dioxins / Furans - The Apex Instruments Method 23 (Modied Method 5) Source
METHOD 23
Sampler Kit is utilized for Method 23 determination of dioxins and furans (D/Fs)
and/or Method 0010 Determination of Semi-Volatile Organic Compounds. Add a
water-cooled glass condense, an XAD absorbent module and a knockout impinger
to the Method 5 system.
METHOD 201A
METHOD 201A
Particle Sizing - Add cyclones to a Method 5 system. The purpose of Method 201A is to
measure particulate matter emissions equal to or less than given nominal aerodynamic
diameter(s). In general, a gas sample is extracted from a stationary combustion source
at a predetermined constant ow rate through in-stack sizing devices. As amended,
Method 201A now combines the existing method (PM10) with a PM2.5 cyclone to create
a sampling train that includes a total of two cyclones.
METHOD 202
Condensate Particulate Matter (CPM), Dry Impinger Method - This isokinetic
method is used to measure Condensable Particulate Matter (CPM) from stationary source
emissions after particulate matter has been removed by a heated lter, such as in Method
5, 17 or 201A. The CPM is collected in dry impingers.
METHOD 202
www.apexinst.com
800-882-3214 / 919-557-7300
Quality Data
Easy to Use
Streamline Reporting
Description
Price
XC-5000
$13,545.00
XC-5000-V
$13,545.00
Specications
Gas Meter: Precision DGM, 0.7 liters per revolution,
Digital Encoder, 1cc resolution.
Temperature Control: Integrated temperature control via the Control
and Data Acquisition Board, probe and oven with solid state relays.
Thermocouple Display: 7 temperatures displayed simultaneously
on the PC User Interface, F or C, Probe, Stack, Oven, Filter,
Exit, AUX and DGM.
Digital Pressure Transducers for
Barometric.
H, and
P +/- 2.5
+/- 63mm
0.01 resolution
0.1 mm resolution
H 0-5
0mm-127mm
0.01 resolutions
0.1mm resolution
Barometric
P (Bi-Directional),
Optional:
4 channel analog input module for logging external
data (4-20ma, 0-10V, 1-5V).
Dimensions:
23 x 21 x 12 (58 cm x 53 cm x 30.5 cm).
Weight: 39 lbs. (17.7 kg).
800-882-3214 / 919-557-7300
www.apexinst.com
Monitor Screen
To activate the heaters in the lter compartment (Hot Box)
and the probe heater turn on the switches labeled FILTER and
PROBE from the Monitor window in the XC-5000 softwares
User Interface. The indicator lights on the SD31 Temperature
automatic controllers will illuminate. The temperature controllers
can also be adjusted via the User Interface.
www.apexinst.com
800-882-3214 / 919-557-7300
Optional
Orsat Pump and
Rotameter
Rugged Custom
Molded X-Case
Temperature
Display
Manometer Quick
Connects
Rocker Switches
with Magnetic
Circuit Breakers
Dual Column
Manometer
Elapsed Timer
Coarse Control
Valve
Digital
Display
Available
Vacuum Gauge
Temperature
Selector Switch
Color Coded
Thermocouple Jacks
Strap
Heavy Duty
Panel Latches
Stainless Steel
Non-Reversible Pump
Quick Connect
(Vaccum)
Manometer Zero
Adjust Knobs
Manometer Level
Adjust
Standard
Stainless Steel
Sample Quick Connect
Standard
Stainless Steel Pitot
Quick Connects
Umbilical
Cable Power
Connection
Fine Control
Valve
Rear View
Removable back panel allows
for quick audits.
800-882-3214 / 919-557-7300
Portable
X-Case with Sample Pump.
www.apexinst.com
M-CBR5A-M (110V)
27
M-CBR3A-M (220V)
Magnetic Type
Circuit Breaker
Rocker Switch
20
19
M-PM3S
XC-10U
Rugged Custom
Molded X-Case
TC-765KF
Temperature
Display
17
QC-MAN-F3
18
QC-MAN-M2
Manometer Quick
Connects
XC-522
16
Dual
Column
Manometer
M-RA911
Rocker Switches
12
MC-T
14
15
DGM-110
Vacuum Gauge
29
M-31302A
DGM-SK25EX
7-Channel
Temperature
Selector Switch
TC-PJK
25
7
24
23
M-49BK
28
10
Electric
Receptacle
M-CB15A-M
M-SCKT15A
Power
Connect Inlet
22
Magnetic Type
Circuit Breaker
QC-BHF4-SS
Standard Stainless
Steel Sample
Quick Connect
Standard Stainless
Steel Pitot Quick
Connects
13
NV3HA-6S
Umbilical
Cable Power
Connection
Fine Control
Valve
Part Number
Description
TC-765KF
M-PM3C
MC-T
M-SCKT15A
M-49BK
M-31302A
TC-PJK
QC-BHF8-SS
QC-BHF4-SS
QC-BHF6-SS
QC-BHM6-SS
B2VH-6S
NV3HA-6S
DGM-110
G301U
M-42210
QC-MAN-F3
18
19
20
21
Description
QC-MAN-M2
XC-10U
M-RA911
AM-MCP
M-422DS
L-441160
3439T12
M-CBR5A-M
27 M-CBR3A-M
28 M-CB15A-M
29 DGM-SK25EX
www.apexinst.com
800-882-3214 / 919-557-7300
Part Number
22 M-422B
23
24
25
26
M-422B
Manometer Level
Adjust
21
AM-MCP
QC-BHF8-SS
M-422DS
Manometer Zero
Adjust Knobs
(Vacuum)
Standard Stainless
Steel Female Pump
Connection (Pressure)
L-441160
Heavy Duty
Panel Latches
(4)
11
QC-BHF6-SS
3439T12
Strap
Color Coded
Thermocouple Jacks
QC-BHM6-SS
B2VH-6S
Coarse
Control Valve
Elapsed Timer
G301U
M-42210
Features:
Precision Gas Meter
Low Cost - Manual Console
Easy Operation and Maintenance
Rugged, Lightweight,
Stackable Case
Removable 19 Front Panel
Carry Strap for Easy Transport
Non-Reversible Sample
Pump Connections
Color Coded Thermocouple Jacks
Bright, Easy-to-Read
Temperature Displays
Easy-Leveling Dual Column Manometer
Stainless Steel Quick Connects & Fittings
Convenient Layout for Manual Data Recording
Description
XC-572
XC-572-V
XC-572-O
XC-572-OV
XC-572-QC6
XC-572-OQC6
XC-572-QC6V
XC-572-OQC6V
Specications
10
Temperature Controllers for Probe and Oven: 1/32 DIN bright red
LED display, indicating temperature controllers with separate 25
amp solid state relay, auto-tuning. Standard Type-K jack for input.
Manometer: Dual Inclined/Vertical Manometer for determining stack velocity and sample ow rate. Inclined Range of
0-26mm H 0 with .2mm. Vertical Range of 26-250mm H O
Umbilical Connections: Sample Inlet: Stainless Steel Quickconnect; Pitot Lines: 1/4 (3/8 optional) Stainless Steel Quick Connect; Electrical: 4 conductor circular connector; Thermocouples: 6
Type K inputs, standard size.
Dimension: 23 x 21 x 12 (58 x 53 x 30cm) Panel 19.
Weight: 40 lbs (18kg)
800-882-3214 / 919-557-7300
www.apexinst.com
Features:
Low Cost - Manual Console
Easy to Operate and Maintain
Rugged, Lightweight,
Stackable Case
Removable 19 Front Panel
Carry Strap for Easy Transport
Non-Reversible Sample
Pump Connections
Color Coded Thermocouple Jacks
Bright, Easy-to-Read Temperature Displays
Easy-Leveling Dual Column Manometers
Dry Gas Meter with direct read index
Stainless Steel Quick Connects & Fittings
Description
XC-522
XC-522-V
XC-522-O
XC-522-OV
XC-522-D
XC-522-DO
XC-522-DOV
Specications
Gas Meter: Rockwell S110 remanufactured with direct read
index, 0.1 cubic feet/revolution, res. 0.001 cubic feet direct read
analog totalizer with 999.999 cubic feet capacity.
Temperature Controllers for Probe and Oven: 1/32 DIN bright red
LED display, indicating temperature controllers with separate 25 amp
solid state relay, auto-tuning. Standard Type-K jack for input.
with 0.01 divisions. Vertical Range 1-10 HO with 0.1 divisions. Fabricated from solid acrylic, precision bored, accurate to
+/- 1%. Convenient self-sealing chrome plated brass quickconnects with Viton O-Rings. Supplied with plastic plugs for
positive secondary seal.
www.apexinst.com
800-882-3214 / 919-557-7300
11
Features
Rugged lightweight case with Molded-In Handle All Stainless Steel Fittings and
Control Valves
Precision Dry Gas Meter with Digital Display
Minihelic Pressure Gauge
Description
XC-40
XC-40V
XC-40-M
XC-40-MV
Specications
Gas Meter: Model SK25EM, 0.7/rev., digital gas volume totalizer,
with Quadrature Encoder, 8 digit LCD Display, 1cc resolution.
Flow Indicator: Precision Machined Stainless Steel Orice w/
Minihelic Pressure Gauge, range (0-2) or (0-50MM H2O).
Temperature Display: Type-K 3.5 Digit LED display (C is standard for export). C/F selectable via plastic jumper behind front
bezel, -105C to 1372C range. (-157F to 1999F).
Probe Temperature Control: Compact, 1/32 DIN autotuning
indicating temperature controller with separate 25 amp solid
state relay. 115 VAC outlet 5-15R, Type-K jack for input.
12
800-882-3214 / 919-557-7300
www.apexinst.com
Specications
XE-0523
Description
XE-0523
XE-0523-V
Replacement
Parts
XE-DAA
Specications
Motor: 1/2hp, 120V/60Hz, 5 1/2 Amp
Measured Flow: 2.9 cfm@ 1 inch Hg;
1.4 cfm@ 15 inches Hg
Maximum Vacuum: 26.5 Hg
Weight: 30 lbs., (14kg)
Pump
XE-DAA
XE-DAA-V
Replacement
Parts
www.apexinst.com
800-882-3214 / 919-557-7300
13
NG-SET
NS-SET
Description
NS-SET
Set of 7 Stainless Steel Nozzles - Sizes 4, 6, 8, 10, 12, 14, & 16,
Including Case and Four 5/8 inch Stainless Steel Nuts and Viton O-Rings.
NG-SET
NI-SET
Set of 7 Alloy 600 Nozzles with preswaged Inconel ferrules, Sizes 4-16, Including Case.
NQ-SET
Set of 7 Quartz Nozzles - Sizes 4-16, Including Case. (Order Ferrules Separately).
NST-SET
Set of 7 FEP Lined/Stainless Steel Nozzles. Sizes 4,6,8,10,12,14 7 16. Includes Case and
Four 5/8 Stainless Steel Nuts, Viton O-Rings.
NSIL-SET
14
800-882-3214 / 919-557-7300
www.apexinst.com
Stainless
Steel
NS-
Nominal
Dimension
Decimal
mm
1/8
0.120
3.0
5/32
0.152
3.8
3/16
0.180
4.5
7/32
0.209
5.3
1/4
0.245
6.2
7.0
9/32
0.277
10
5/16
0.305
7.7
11
11/32
0.334
8.4
12
3/8
0.370
9.9
13
13/32
0.402
10.2
14
7/16
0.430
10.9
15
15/32
0.459
11.6
16
1/2
0.495
12.5
17
17/32
0.527
13.3
18
9/16
0.568
14.4
Alloy 600
NI-
FEP Lined
Stainless Steel
NST-
Silico Coated
Stainless Steel
NSIL-
Inch
Nominal I.D.
Decimal
mm
1/8
0.120
3.1
5/32
0.152
3.9
3/16
0.180
4.7
7/32
0.209
5.3
1/4
0.250
6.3
9/32
0.281
7.1
10
5/16
0.312
7.9
11
11/32
0.343
8.7
12
3/8
0.375
9.5
10.3
13
13/32
0.406
14
7/16
0.437
11.0
15
15/32
0.468
11.8
16
1/2
0.500
12.7
17
17/32
0.531
13.4
18
9/16
0.558
14.1
Glass
NG-
Quartz
NQ-
Nominal I.D.
Stainless Steel
NS-TH
Inch
Decimal
mm
20
5/8
0.625
15.8
22
11/16
0.687
17.4
24
3/4
0.750
19.0
26
13/16
0.812
20.6
28
7/8
0.875
22.2
30
15/16
0.937
23.8
32
1.0
25.4
www.apexinst.com
Blank
800-882-3214 / 919-557-7300
15
NB-SET
NBT-1/2
NB-SET
NBT-1/2
Nozzle Brushes
Model
Description
NB-3
NB-5
NB-8
Description
VPC-4-16
VPC-6-16
VPC-8-16
VPC-10-16
Nozzle Unions
16
Model
N-10
N-10TG
5/8 inch Glass Filled Teon Tube Nut, 12 ats (sided) Fits Unions and Ball Adapters
N-10UB
N-10US
Stainless Steel Union, Bored Straight Through, with Nuts and Ferrules
N-10UBT
Stainless Steel union, Bored Out, PTFE Coated, with Nuts and Ferrules
N-10UST
Stainless Steel, Bored Straight Through, PTFE Coated, with Nuts and Ferrules
NI-10UB
Alloy 600, 5/8 Tube Union Bored Out, with Nuts and Ferrules
NI-10US
Alloy 600, 5/8 Bored straight through, with Nuts and Ferrules
N-10USIB
5/8 Silcosteel-treated Stainless Steel Bored Union, Nuts and Ferrules included
NTG-10U
Glass Filled 5/8 PTFE Tube Union with Nuts and Ferrules
NTG-10UNN
Glass Filled PTFE Tube Union without Nuts and Ferrules, Body Only
800-882-3214 / 919-557-7300
www.apexinst.com
N-10
NI-10N
N-10TG
Rings
Model
N-10BR
Thrust Backer Ring, 5/8 for O-Ring Seal, Stainless Steel. For use with O-113V
O-113V
O-113V-DZ
Viton 5/8 O-Ring to seal liner (for use with N-10BR), Dozen
O-014V
O-014V-DZ
Ferrules
Model
10FF-S
10FB-S
10F-GR
10F-GR-DZ
Material
Max Temperature
NTG-10F
NTG-10F-DZ
NI-10FF
NI-10BF
NT-10F
NT-10F-DZ
Stainless Steel
PFA Fittings
Borosilicate Glass
Inconel
Quartz
Viton O-Rings
Graphite Ferrules
Glass Filled PTFE
Hastelloy C276
650C (1200F)
177C (350F)
480C (900F)
980C (1800F)
900C (1650F)
260C (500F)
980C (1800F)
315C (500F)
980C (1800F)
Nozzle
Installation
Quartz.
Nozzle
Installationfor
for Glass
Glass and
and Quartz.
Small Parts Kit
www.apexinst.com
800-882-3214 / 919-557-7300
17
1 footshorter
shorter then
-1-foot
theneffective
nominal
Optional Oversheath
Packing Gland
PG-32S
PG-32S
PG-32S
Stainless Steel
Probe Sheath +
Heater PS-H
Optional with 2
OD Probe
Oversheath PS-H-O2
Watt
Replace
with Nominal
Length (feet)
Stainless Steel
Probe Sheath +
Heater PS-H
Optional with 2
OD Probe
Oversheath PS-H-O2
Watt
350
475
350
10
500
400
11
550
400
12
600
400
14
600
450
16
700
New CEM solutions and alternative probe designs (Controlled Condensate and ECS). Add V to end of part number for 240V option at no extra cost.
18
800-882-3214 / 919-557-7300
www.apexinst.com
d Probe
Air Coole
Part Number
APS-4I
APS-6I
APS-8I
Blowers
Blower, APS, 93 CFM, 120V Blower Assembly for
APS Probes, ICS-TBPM frame, 93 cfm, Vacuum Hose
Not Included, 120VAC, Variable Speed Controller.
HGB-93CFM
HGB-93CFM-V
PROBE LINERS
Standard Probe Liners are constructed from 5/8 diameter tubing and have #28 ball joint attached.
Liners are available in borosilicate glass, quartz, stainless steel, Alloy 600, C276 and PFA; liners with
integrated nozzles require a ball joint adapter. Glass and quartz liners with male 14/35 taper joint are
available for attaching to the nozzle, eliminating the need for the 5/8 union.
Standard Probe Liner
Additional
Materials Available
Upon Request
Length in Feet
Tubing
PLS-
GN
Probe Liners
GA-28B10TG
Probe Liner with Male 14/35 Taper Joint and #28 Ball Joint
PLN- GT
or
PL- QT
N
Quartz or Glass
14/35 Taper
Size
GN
Glass PLN-G
Quartz PL-Q
C-276 PL-C
GT PLN-GT
QT PL-QT
3
4
5
6
7
8
9
10
11
12
14
16
www.apexinst.com
800-882-3214 / 919-557-7300
19
Replacement
Heater PH-
Watt
350
350
400
400
400
450
475
10
500
11
550
12
600
14
600
16
700
Product
Description
MPT-6-133
MPT-6-181
MPT-6-181-OFF
Replacement Pitot Tip, 3/8, Stainless Steel, Offset for use with
47mm Filter holder and PM2.5 Cyclone, 181mm
MPT-6-218
MPT-6-283
MPT-6-320
MPT-6-421
Replacement Pitot Tip, 3/8, Stainless Steel, Extended for use with
PM10/2.5 Cyclones and SFA-47 In-Stack Filter, Length 421mm
length in mm
20
Description
TTG-10/6
TPFA-10/6
TS10-035S
TI10-035S
Ball Adapters
Part Number
Description
GA-28B10TG
GA-28B10TGNN
800-882-3214 / 919-557-7300
www.apexinst.com
SB-2M Miniature
Heated Filter Box
SBR-10
SB-3
Description
SB-50
SB-50-V
SB-50/4
SB-50/4-V
SB-2 Heated
Filter Box
Flexible Arrangement
Arrangem
SB-3
Description
SB-1
SB-1V
SB-1/4
SB-1/4V
Rigid Arrangement
Monorails, page 52
www.apexinst.com
800-882-3214 / 919-557-7300
21
SB-2M
SB-2M
Shown with GA-104 Strain
Relief. Order Separately
SB-2MV
Add V to end of part number
for 240V at no extra cst.
GA-104
The GA-113 strain relief is used specically with heated sample lines at the
SB-2M during Flexible Method 5 sampling. Includes bracket that attaches to
the SB-2M and an adjustable Velcro
strap to grip heated sample lines.
GA-113
GA-113
SB-2MST
SB-2MSTV
SB-2MST
SB-2MSTV
SB-2
SB-2
Model
Description
PC-1
PC-1VU
PC-1VD
PC-2/32
SB-2V
22
800-882-3214 / 919-557-7300
www.apexinst.com
Description
SB-2MD
Miniature Heated Filter Box with 2 Access Doors & Probe Clamp, 120V. Modied With 2 inlets/
outlets for use with dual-probe.
SB-4SD
Impinger Box/Insulated Coolant Reservoir SB4SD, Holds 8 impingers, divided with 2 sections
SB-4SDM2
SB-3
SB-4
SB-4SD
SB-5
Impingers Cases
Model
Description
Holds Impingers
Dimensions (HxWxD)
Weight
SB-3
SB-4
SB-4SD
SB-5
RISERS
Sample Case Risers attach to the base of the lter oven for test methods requiring extra height between the
lter outlet and the rst impinger. The SBR-10 Riser is required for attaching the impinger case to the SB-2M
for rigid arrangements. SBR-18 Riser is primarily used for Method 23 sampling when using
a vertical condenser.
SBR-10
Model
Description
Dimensions (HxWxD)
Weight
SBR-10
Riser for SB-2M, impinger box adapter, 10 riser with insulated reservoir
SBR-18
Riser for MM5, impinger box adapter, 18 riser with insulated reservoir
GA-100
UA-3J
The Modular Sample Frame (SB-8) with Probe Clamp is an ideal addition for sampling
methods that require no heated lter compartment such as Method 8, Method 306
and in-stack ltration methods. The SB-8 secures the probe and impinger case in a
rigid manner. The sample frame is made of durable powder coated aluminum with
stainless steel probe clamp and impinger case slides.
SB-8
SB-8
SB-3
The GA-100 connects the nal impinger outlet to the umbilical cable. Standard
with #28 socket, thermocouple and 1/2 stainless steel male quick connect.
Mounts on Impinger box.GA-100
www.apexinst.com
SBR-18
GA-100
UA-3J
800-882-3214 / 919-557-7300
UA-3J-V
23
GN-8-18K
TCA-06x24
Standard 24 thermocouple wire.
Extension version available
GNFA-3
GN-11
GN-1
O-126V Impinger
Taper Viton,
O-Ring, Top
GN-2
Cyclone Body
(optional)
O-123V Impinger
Taper Viton,
O-Ring, Bottom
GN-3
Cyclone Flask
(optional)
GN-9A
GN-9AO
GN-9A
GN-9A
Description
GN-CG4
Description
GN-CGS
GN-CGS4
GN-CGS-Z
GN-CGS4-Z
Description
GN-8
GN-9AO
GN-9A
GN-11
12
BS28WS
24
Model
Part #
Description
GN-1
GNFA-3 or
GNFA-4
GN-8-18K
GN-9AO
GN-9A
GN-11
12
BS28WS
800-882-3214 / 919-557-7300
www.apexinst.com
NOTE: Set does not include cyclone or cyclone ask. Spare O-Rings are included.
Part
Description
TC-GW2.5
GN-1
GNFA-
GN-8
Case Dimensions:
25 (63.5 cm) x 19 (48.2 cm) x 23 (58.4 cm)
GN-8-18K
GN-9AO
GN-9A
GN-11
Description
GN-DGS
GN-DGS4
30
BS28WS
GA-3P
Filter Tripod
30*
O-116S
10*
O-123V
10*
O-126V
* Spares
GLASSWARE ACCESSORIES
Caps & Seals
Product
Description
GA-GL-18B
Product
Description
Product
Description
GA-18C
O-116V-DZ
BS28WS
GA-GL-18S
O-116T-DZ
RC-29
GA-GL-18ST
TFE Encapsulated
Silicone O-Rings for
grooved #28 ball, dozen
O-123V-DZ
KBS-29
GA-GL-18T6
Keck Clip,
#29, plastic
ball joint clamp
GA-GL-18T8
O-126V-DZ
GA-GL-18/9
www.apexinst.com
800-882-3214 / 919-557-7300
25
Model
Description
GN-2S
GNFA-2
GN-2B
GA-2CA
GA-2T
O-138T
GNFA-2U
O-138V
GA-2P
GN-2S-18K
GNFA-3
Description
GN-3S
GN-3SS
GN-3SS-S
GNFA-3Z
GN-3S-18
GN-3B
GA-3CA
GNFA-3U-18
GA-3CZ
GA-3T
GA-3SS
O-152T
O-152V
GA-3G
GA-3P
GNFA-3U-18K
3 Unground Glass, PTFE Filter Support,
Open Style Aluminum Clamp, Straight
Through Style.
GNFA-3-STR
GNFA-4
3 Stainless Steel
Filter Support Disk.
GA-3T..$79.00
GA-3SS..$137.00
GA-3G..$87.00
GNFA-4Z
Description
GN-4S
GN-4B
GA-4CA
GA-4CZ
GA-4T
O-156T
O-156V
GNFA-4-5G
GA-4P
26
800-882-3214 / 919-557-7300
www.apexinst.com
BOTTLES
INSERTS
387mm
15.0 in
380 mm.
13.0 in.
GN-9IK
GN-9IO
GN-9I
Model
Description
Model
Description
GN-9B
GN-9I
GN-9B-1
GN-9B-1.5
GN-91O
GN-9B-2
GN-91K
GN-9B-4
GN-9B-M7
403mm
15.867in
GN-9A
GN-9AO
GN-9AK
www.apexinst.com
GN-3
Description
GN-9A
Modied Greenburg-Smith
(plain stem), 500 ml
GN-9AO
GN-9AK
GN-9AO-M7
Model
Description
GN-2
GN-3
GN-2RH
GN-9AO-M7
CYCLONES
GN-2
Model
GN-2RH
800-882-3214 / 919-557-7300
27
GN-1
GN-11
Model
Description
GN-1
GN-1-18
GN-8
GN-8-18
GN-13
GN-8
GN-8-18K
GN-11
GN-13
GFA-2590N-CC
GFA-2590B-CC
28
Product
Description
GFA-2590N-CCS
GFA-2590B-CC
GFA-2590N-CC
GFA-2590B-CC
GN-HCCH-A
GN-16
$333.00
800-882-3214 / 919-557-7300
GN-17
www.apexinst.com
Description
GN-18
GN-18B
GN-19
GN-20B4
GN-20B6
GN-20B8
GN-20B10
GN-20S4
GN-20S6
GN-20S8
GN-20S10
GN-18
GN-18B
GN-20S
GN-19 GN-20B
Description
GFA-2590N*
GF-2590
GFA-2590B
GF-2590
GFA-2590N
KTM-29 CLIP
Product
Description
G-47N 4
G-47N 5
G-47N 6
G-47N 7
G-47N 8
Product
Description
G-47N 10
G-47N 12
G-47N 14
G-47N 16
Nozzle
Size
GFA-2590B
Filter Body
5/8 Shank
GFA-2590B
G-47N-
www.apexinst.com
800-882-3214 / 919-557-7300
29
Description
GN-VCHM-M202
GNFA-3U-18K
GN-VC-M202
GN-9AKS
GNFA-3U-18K
GN-3S
GN-3S-18
TCA-03X24
TCA-03X24G
GN-VCHM-M202
GN-9AKS
GN-VC-M202
Description
GN-9AKSA
GN-9AKS
Knock-Out Impinger Assembly,
Short Unground
(for Horizontal MM5)
Controlled
Condensate
Method
23 Glassware
GN-9AKSB
GN-9AKSI
GN-9AKSIL
GN-HCCH
GN-HCCH-A
GNM-HC-18K
Horizontal Condenser, #28 Socket both ends, #18 joint for monitoring
Condenser Outlet temperature, Water Jacket with Hose Barbs, Glass-Type
K thermocouple assembly included.
GNM-HC
GNM-HC-18
Horizontal Condenser, #28 Socket both ends, Water Jacket with Hose
Barbs with #18 GL joint. TC not included.
GNM-HC-18F
Horizontal Condenser, #28 Socket both ends, #18 joint for monitoring
Filter Outlet temperature, Water Jacket with Hose Barbs,
Glass Type K thermocouple assembly NOT included.
GNM-T
GN-9AKSB
GN-9AKSI
GN-9AKSIL
GN-9AKSA
GNM-T
GNM-HC
GNM-HC-18
XAD Trap, #28 Unground Socket & O-Ring Ball (Top), Water,
Jacket Hose Barbs.
GN-9AKS
30
800-882-3214 / 919-557-7300
GNM-HC-18F
www.apexinst.com
GA-28S6TG
Glass-Filled PTFE #28 Ball to 1/4 Female NPT
GA-28S6TG
GA-28B4NTG
GA-28S4NTG &
8MSEL4N-PFA
GA-28S4NTG
GA-28B4NTG
GA-28B10TG
Probe Liner
GA-28S4NTG
GA-28B4NTG &
8MSEL4N-PFA
NTG-10U
N-10TG
NTG-10F
NTG-10UNN
5/8 Glass Filled PTFE Ferrule, Dozen
NTG-10F-DZ
www.apexinst.com
800-882-3214 / 919-557-7300
31
GA-28B4N
#28 Socket to 1/4 FNPT
GA-28B4N
GA-28S4N
Fitting Size
Tube Union
GA-28S4
#28 Socket to 3/8 Tube Fitting
4N=NPT (Female)
GA-28S4N
GA-28S6
#28 Socket to 1/2 Tube Fitting
4MSEL4N-S
GA-28S8
#28 Socket to 5/8 Tube Fitting
GA-28S10
GA-28S4
4MSEL4N-S
6MSEL4N-S
GA-28S4EL6
GA-28S4EL6
8MSEL4N-S
SN-8-4
S-8-4K
SN-8-4
S-11
4MSC4N-S
3/8 Tube Fitting to 1/4 MNPT
6MSC4N-S
1/2 Tube Fitting to 1/4 MNPT
8MSC4N-S
32
4MSC4N-S
S-11
800-882-3214 / 919-557-7300
www.apexinst.com
SN-8-4
SN-9IO
KST-45
SN-9B
SN-9A
SN-9AO
SN-9A
SN-9A
Description
SN-5C
Stainless Steel Impinger Assembly, #28 Socket & Ball, Includes: Three SN-9A,
One SN-9AO, Three SN-11, One SN-8-4, Eight BS28WS clamps, Four KST-45 Keck Clips.
Description
SN-9A
Stainless Steel impinger Assembly, insert with bottle, straight stem, #28 balls (2), machined cap, #45 keck clip, 750 ml max capacity. (Discounted Assembly Price).
SN-9AO
Stainless Steel impinger Assembly, insert with bottle, with 1/16 stem orice, #28 balls
(2), machined cap, #45 keck clip, 750 ml max capacity. (Discounted Assembly Price).
SN-9IO
Stainless Steel Impinger insert only, orice stem, #28 balls, machined
SN-11
SN-8-4
Double L Adapter, #28 Stainless Steel Sockets, & 1/4 TU for TCA-6X24
(Sold Separately)
Impingers Accessories
SN-9B
Stainless Steel Impinger Bottle only, 750 ml capacity, with threaded cap
KST-45
Keck Clip, size 45, plastic, used on SN-9A & SN-9AO SS impinger assemblies
SN-11
SN-8-4
Double L Adapter, #28 Stainless Steel Sockets, & 1/4 TU for TCA-6X24 (Sold Separately)
BS28WS
O-222S
O-Ring, Silicon Duro 40, Red (use one per impinge assembly)
www.apexinst.com
800-882-3214 / 919-557-7300
33
Oven TC
Filter TC
Oven
CLASSIC UMBILICAL
ADAPTERS
Model
Description
U-30
30, Method 5, 1/4 Pitot Quick Connects, Stainless Steel Quick Connects
U-60
U-90
90, Method 5, 1/4 Pitot Quick Connects, Stainless Steel Quick Connects
QS4/6
Stainless Steel Quick Connects 1/4 Male, 3/8 Female Pitot Quick Connects
QS6
Stainless Steel Quick Connects 3/8 Male and Female Pitot Quick Connects
UA-HJ
Probe Power Adapter
(UA-HJ)
Description
QS4/6
Stainless Steel Quick Connects 1/4 Male, 3/8 Female Pitot Quick Connects
QS6
Stainless Steel Quick Connects 3/8 Male and Female Pitot Quick Connects
UA-HJ
Description
US-30-10
US-60-10
US-90-10
U-BAG
Orsat
Pitot 1/4 QC
Sample 1/2 QC
Filter
Amphenol
Oven
6 connectors
To Meter Console
34
Aux
Stack
Probe
800-882-3214 / 919-557-7300
www.apexinst.com
UA-FP
UA-3J
UA-3J-V
UA-3J
UA-3JV
UA-FP2
UA-FP2
Advantages/Features
Options/Accessories
Blank=110V
V = 220V
www.apexinst.com
800-882-3214 / 919-557-7300
35
1/4
10
1/4
20
1/4
35
1/4
75
1/4
100
1/4
3/8
10
3/8
25
3/8
Self-Regulated
Heated Sample Line
HSRLB--
3/8 x 1/4
Cable Specications
Heater Cable
Supply Voltages:
120 or 220Vac
GA-113
GA-107-
GA-113...$53.00
Maintenance Temperature:
Up to 250F (120C)
Maximum Exposure
Temperature:
366F (185C)
15 amp
80
160
20 amp
110
215
30 amp
135
270
STRAIN RELIEF
Mini Heated Filter Box Sample Line Strain Relief
The GA-107 strain relief is used with sample lines at the SB-2M during Flexible Method 5 sampling.
Includes bracket that attaches to the SB-2M and standard mount with sample line clamp (specify size).
36
Model
Description
GA-107-9
Line Adapter (for SB-2M), includes Bracket and 3/8 inch ID Sample Line Clamp
GA-107-12
Line Adapter (for SB-2M), includes Bracket and 1/2 inch ID Sample Line Clamp
GA-107-32
Line Adapter (for SB-2M), includes Bracket and 1-1/4 inch ID Sample Line Clamp
GA-107-50
Line Adapter (for SB-2M), includes Bracket and 2 inch ID Sample Line Clamp
GA-107-57
Line Adapter (for SB-2M), includes Bracket and 2-1/4 inch ID Sample Line Clamp
800-882-3214 / 919-557-7300
www.apexinst.com
HSL--
HSRL- Diameter of each sample or cal gas
tubing (4 = 1/4, 6 = 3/8, 8= 1/2)
Description
HSL-6-10
10, 3/8 PFA Sample Line, with Insulation & Protective Sleeve, 120V, ~ 20 Watts / Per Ft.
HSL-6-15
15, 3/8 PFA Sample Line, with Insulation & Protective Sleeve, 120V, ~ 20 Watts / Per Ft.
HSL-6-20
20, 3/8 PFA Sample Line, with Insulation & Protective Sleeve, 120V, ~ 20 Watts / Per Ft.
HSL-6-25
25, 3/8 PFA Sample Line, with Insulation & Protective Sleeve, 120V, ~ 20 Watts / Per Ft.
HSL-6-10V
10, 3/8 PFA Sample Line, with Insulation & Protective Sleeve, 240V, ~ 20 Watts / Per Ft.
HSL-6-15V
10, 3/8 PFA Sample Line, with Insulation & Protective Sleeve, 240V, ~ 20 Watts / Per Ft.
HSL-6-20V
20, 3/8 PFA Sample Line, with Insulation & Protective Sleeve, 240V, ~ 20 Watts / Per Ft.
HSL-6-25V
25, 3/8 PFA Sample Line, with Insulation & Protective Sleeve, 240V, ~ 20 Watts / Per Ft.
Add V to end of part number for 240V at no extra cost. Temperature Controller Required.
USL--
USL- Length in feet
SST (#28 socket elbow tting) or
QST (1/2 quick connects/#28 socket elbow)
Description
USL-10-SS
10 Unheated Line, 3/8PTFE/Stainless Steel PTFE, SS overbraid, #28 Socket Elbow Fitting Both Ends
USL-10-SST
10 Unheated, PTFE/SS Overbraid, w/Thermocouple Assembly, #28 Stainless Steel, Socket Elbow Fittings
USL-15-SST
15 Unheated, PTFE/SS Overbraid, w/Thermocouple Assembly, #28 Stainless Steel, Socket Elbow Fittings
USL-25-SST
25 Unheated, PTFE/SS Overbraid, w/Thermocouple Assembly, #28 Stainless Steel, Socket Elbow Fitting
USL-10-QST
10 Unheated, PTFE/SS Overbraid, 1/2 Female Stainless Steel Quick Connect, w/Thermocouple Assembly,
#28 Stainless Steel Socket Elbow
USL-15-QST
15 Unheated, PTFE/SS Overbraid, 1/2 Female Stainless Steel Quick Connect, w/Thermocouple Assembly,
#28 Stainless Steel Socket Elbow
USL-25-QST
25 Unheated, PTFE/SS Overbraid, 1/2 Female Stainless Steel Quick Connect, w/Thermocouple Assembly,
#28 Stainless Steel Socket Elbow
USL--SST
Connects to the
SB-2M
www.apexinst.com
USL--SS
Connects
Probe Liner
to Impinger
800-882-3214 / 919-557-7300
USL--QST
Connects to
the SFA-82H
37
SK-M4
SK-M4-V...(220V)
Method 4 Individual Accessories
Part
Description
PC10-4S
SB-8
GN-CG4
SB-3
GA-100
US4-25-10
38
800-882-3214 / 919-557-7300
www.apexinst.com
SK-M5BP
SK-M5BP-V
DELUXE-PLUS METHOD 5
The professional source sampling company must be prepared for a wide variety of conditions and locations. Apex recommends the Deluxe Plus system, which can be used in
both rigid and exible congurations. Even with the classic rigid arrangement, the additional
glassware allows you to have pre-measured and lled impingers, pre-weighed lter assemblies, and minimum turnaround time between runs. The exible arrangement is helpful in
challenging environments like vertical traverses and space-limited locations. After selection
of a meter console and external sample pump, the Deluxe-Plus system provides all of the
components listed in the above Basic-Plus system & the following:
Deluxe-Plus Method 5:
Basic Method 5
Glass Nozzle Set
3-ft & 9-ft Probe Assemblies with
Stainless Steel & Glass Probe Liners
60-ft Split U-Cord
2.5 Sets of Glassware Plus
Carrying Case
4 Monorail Assemblies (9-ft & 12-ft)
Transport Case for a
Meter Console
Calibrated Orice Set
SK-M5DP
SK-M5DP-V
Schematic of Method 5 Rigid Sampling Train
www.apexinst.com
800-882-3214 / 919-557-7300
39
SK-CM5
SK-CM5-V
SK-CM5 Kit
Heated Filter Assemblies (3)
Probe Sheath with Heater
Stainless Steel Probe Liner
Impinger Box
Impinger Inlet Strain Relief
60 Split Umbilical Cord
Unheated Sample Line with
Stainless Steel Overbraid
Power Box Adapter
Umbillical Adapter
Stainless Steel Nozzle Set
Stainless Steel Impinger Assembly
PTFE Coated Glass Fiber Filters
SFA-82 (unheated)..............
SFA-82H..............................
SFA-82HV............................
SFA-82-QCF6......................
SFA-82-BKT.........................
SFA-82-BKT
SFA-82H
Depending upon the source, it may be possible to combine
Method 5 and Method 8 into the same train.
40
800-882-3214 / 919-557-7300
SFA-82-QCF6
www.apexinst.com
Description
GN-4S
GA-4T
GN-4B
GA-4DA
GA-4CA
TCA-04
GNFA-4-5G
GNFA-4-5G
METHOD 5I
The METHOD 5I SAMPLING KIT is similar to Basic Method 5, except for the addition of the 5I Holder (SGFA-47-5I) and is designed for
the determination of low-level particulate matter (PM) emissions from stationary sources. Method 5I is most effective for PM catches less
than 50 mg and is valid for performing correlation of manual PM measurements to PM continuous emission monitors or determining PM
emissions from low-level sources such as turbines. Add V to end of part number for 240V at no extra cost. After selecting a Method
5 Meter Console and an external sample pump in conjunction with a Method 5 kit, add a Method 5I Holder.
The 5I Filter Holder inlet is constructed of Borosilicate Glass to hold a 47mm glass ber lter with a wafer-thin stainless steel lter support
and a Viton O-Ring. The assembly is wrapped with PTFE tape for weighing, averaging less than 35 grams, providing a positive seal
against leakage. Method 5I 47mm Filter Assembly with Glass Inlet & SS Outlet, has two
45 degree bends.
SGFA-47-5I
SGFA-47-5I
SGFA-47-5IS
SGFA-47-5IS
www.apexinst.com
800-882-3214 / 919-557-7300
41
Description
SB-8
UA-3J
GNFA-2U
2 Filter Assembly,
Unground Glass with
90 Inlet and Outlet,
Open Style Alum Clamp
GNFA-2U
UA-3J
GA-100
Glass Nozzle
NG-
SB-8
SB-3
US- -10
CONTROLLED CONDENSATE
Conditional Test Method CTM-13
Controlled Condensate is an alternative to EPA Method 8 for determining
sulfuric acid emissions. Sulfuric acid vapor or mist and the sulfur dioxide
are separated, by controlling the condensation based on difference in dew
points, and both fractions are measured separately by the barium-thorin
titration method. Controlled condensation method is the primary sampling
and analytical tool for quantifying sulfuric acid emissions from stationary
sources. The method is based upon the selective condensation
GFA-2590#-CC
of sulfuric acid from a gas stream by means of a water cooled
condenser. The major advantage of the condensation method
is that it provides reliable reproducible SO3
and SO2 values with minimal interference
Stainless Steel Sheath
from high SO2 concentrations.
PCS10-6-CC
There are several versions of
Glass Liner
the method. Option V
PLN-6G
is added for 240V.
SB-2M-STCC
MH-125
SK-CC
SK-CC-V
Quartz Liner Available
772 Watts Heater
Sampling Kit Available
42
800-882-3214 / 919-557-7300
www.apexinst.com
SK-M17P
SK-M17P-V
Schematic of U.S. EPA Method
17 Rigid Sampling Train
METHOD 7C and 7D
In Method 7C and 7D an integrated sample is passed
through a series of full-size orice impingers that
contain an alkaline-potassium permanganate solution.
The sample rate is between 400 and 500 cc per minute,
normally three one hour samples are collected per test.
The MC-623 is the console of choice, however, a low
ow orice adapter is offered for converting the XC-572
Method 5 source sampler console for low ow sampling.
The Method 7C sample is analyzed colorimetrically
and for Method 7D analysis is by ion chromatography.
Please inquire for additional details. Add V for
220VAC option.
PC10-3G
GN-8
GN-11
SB-3
SB-8
CK-M7CD
GN-9AO-M7
GN-9A
Method 7 Accessories
Model
Description
PC10-3G
PLN-3G
GN-8
GN-11
GN-9AO-M7
www.apexinst.com
800-882-3214 / 919-557-7300
GN-9A
GA-100
SB-3
SB-8
43
Replacement Seals
SFA-47
SFA-47
Inconel Version
SFA-47INCO
In-Stack Filter Assembly, 5/8 Tube Union,
uses 30mm x 100 mm Thimble Filter
Element. SFA-300
Part
Description
O-128V
O-324S
O-324G
O-324V
O-223V
O-223H
SF-TT20
SFA-2590
Product
G-47N-4
G-47N-5
G-47N-6
G-47N-7
G-47N-8
G-47N-10
G-47N-12
G-47N-14
G-47N-16
SGFA-47NK
Filter Inlet 47 mm Glass Filter Inlet with Integrated Nozzle.
Replace with nozzle diameter.
GFA-2590K
Nozzle Insert - Replace with nozzle diameter. (Sizes 4-16).
Call for additional sizes
GFA-2590N
Filter Body - 5/8 Glass Filter Body
GFA-2590B
KTM-29 CLIP
GFA-2590N
Nozzle Insert
GFA-2590B
Filter Body
Nozzle
Size
44
5/8 Shank
Metal Taper Joint Clamp - A durable nickel plated steel clip that securely
holds the conical joint under pressure to withstand temperatures of up to
500C (932F).
KTM-29
Call for Pricing of Quartz Components
800-882-3214 / 919-557-7300
www.apexinst.com
Select Meter Console and External Pump for M23 then add a kit.
Add V to part number for 240V option at an additional cost.
SK-M23DP
SK-M23DP-V
Hot/Cold Box/Riser
30 Split-Back Umbilical
Programmed Calculator
Requirements:
Borosilicate Glass or Quartz Nozzles and Probe Liners
are recommended.
Wrap XAD sorbent module with aluminum foil to shield
from radiant heat and ultraviolet rays that dechlorinate the
D/F isomers.
MM5-P
MM5-PM
Product
MM5-P
MM5-PM
MM5-P220
Description
Method 23 Glassware
Product
Conversion Accessories
Product
Description
SB-4
GNM-HC
MM5-P
GN-16
GNM-T
GN-17
KBS-29
GN-9AKS
TL-7/5
Latex Tubing, 7/16 OD, 5/16 ID, Natural Color, Per Foot
Links
www.apexinst.com
800-882-3214 / 919-557-7300
45
Conversion Accessories
SB-4
NG-SET
Set of 7 Glass Nozzles - Sizes 4,6,8,10,12,14&16, Includes Case and Three 5/8 Glass Filled PFA Ferrules
NBT-1/2
PBX-10T
PBT-5/8
PTFE Probe Brush Tip (PTFE Barrel and Bristles), 5/8 inch Bristle Diameter
GN-9AK
GN-9AO
Impinger Assembly, Stem with Orice & Plate, 500ml, Unground O-Ring Joints, Greenburg-Smith
GF-3TPG
82mm PTFE Coated Glass Fiber Filters - Hydrophobic, Low absorption of acid gases such as SOX or NOX
. 50/box (MFS PG60)
46
800-882-3214 / 919-557-7300
www.apexinst.com
Conversion Accessories
SB-4
NG-SET
GF-3QR
GN-9AK
GN-9A
GF-3Q
PBT-5/8
PBX-10T
NBT-1/2
NTG-10U
www.apexinst.com
800-882-3214 / 919-557-7300
47
Conversion Accessories
SB-4
NG-SET
Set of 7 Glass Nozzles - Sizes 4,6,8,10,12,14&16, Includes Case and Three 5/8 Glass Filled PFA
Ferrules
BS28WS
NBT-1/2
PBX-10T
PBT-5/8
PTFE Probe Brush Tip (PTFE Barrel AND PTFE Bristles), 5/8 inch Bristle Diameter
GN-9A
GN-9AO
Impinger Assembly, Stem with Orice & Plate, 500ml, Unground O-Ring Joints, Greenburg-Smith
GN-11
GF-3Q
48
800-882-3214 / 919-557-7300
www.apexinst.com
PM1-K
Packing List
Product
Description
PM1-K
PM1
PM2-NS
PM2-K
Product
Description
PM2-K
PM2
PM2-NS
PM2-NSA
Add-On Set of 6 Nozzles (NS-7, 8, 9, 10, 11, 12) for upgrading PM2.5
Cyclone Existing Kits, Stainless Steel
O-024V
O-024H
Packing List
www.apexinst.com
Product
Size
Product
Size
Product
Size
Product
Size
PM2-N1
.125 Size 1
PM2-N4
.172 Size 4
PM2-N7
.216 Size 7
PM2-N10
.274 Size 10
PM2-N2
.138 Size 2
PM2-N5
.188 Size 5
PM2-N8
.234 Size 8
PM2-N11
.296 Size 11
PM2-N3
.156 Size 3
PM2-N6
.200 Size 6
PM2-N9
.253 Size 9
PM2-N12
.320 Size 12
800-882-3214 / 919-557-7300
49
Description
PM10-K
PM10
PM10-NS
O-032V
O-032H
MPT-6-320
Product
Size
Product
Size
Product
Size
Product
Size
PM10-N0
.125 Size 0
PM10-N3
.164 Size 3
PM10-N6
.215 Size 6
PM10-N10
.342 Size 10
PM10-N1
.136 Size 1
PM10-N4
.180 Size 4
PM10-N7
.233 Size 7
PM10-N11
.390 Size 11
PM10-N2
.150 Size 2
PM10-N5
.197 Size 5
PM10-N9
.300 Size 9
PM10-N12
.320 Size 12
Description
PM2.5-10K
PM2/10-CK
Connector Kit includes: GA-110 Strain Relief Adapter for PM2.5 and
PM10 Cyclones, NSB-16 Button Hook Adapter for connecting the
PM10/2.5 Cyclones, 10MSC5-S Connector, adapts NSB-16 to
PM2.5 Cyclone, 5/8 TU to 5/16 bevel seat, Stainless Steel,
and N-10UBNN SS Union, 5/8, Bored out .660 with
shoulder, Body only, No Nuts or Ferrules
PM2/10-CKI
SFA-47
GA-110
PM2.5-10K
NSB-16
10MSC5-S
50
UA-3J
MPT-6-421
GF-47
SB-8
800-882-3214 / 919-557-7300
www.apexinst.com
CI-701-K
Cascade Impactor 7 Stage 47 mm lter
outlet, Viton O-Rings, Foil collection plates.
CI-701
CI-FP
CI-701-K
PRA-K
CI-701
Description
PRA-K
PRA-N4
1/8
PRA-N6
3/16
PRA-N8
1/4
PRA-N10
5/16
PRA-N12
3/8
PRA-N16
1/2
PRA-NS
Functions
Calculates each stages aerodynamic cut point and DP50, needed to reduce particle size data.
Calculates and Stores ancillary data, such as dry gas composition and moisture content.
Reduces velocity traverse data.
Aids in selection of sample ow rates and ideal nozzle size.
Calculates ow rates and dwell times required for PM10 and PM2.5 sampling traverses.
Calculates fractional efciencies of control devices from samples obtained at inlets and outlets.
Product
Description
WINCIDRS
WINCIDRS
Description
PM-2.5-10C
www.apexinst.com
800-882-3214 / 919-557-7300
51
Components List
GNFA-3U-18K
Method 202 Sampling Train
SB-4SD
GN-9AKSA
GA-28S4
Stainless steel adapter, 28mm
socket to 1/4 FNPT, 3 long
400F rating.
GF-3TM
SFA-116IL
Stainless steel lter housing in-line 1/4
FNPT, 3 long 400F rating. Size: 1 Micron.
Other sizes available.
GN-VCHM-M202
SFA-1101T
MM5-PM
Mini submersible coolant pump, 110V.
MM5-P
GN-VCHM-M202
GN-8
GN-9AKS-IL
Purge
Stem
GN-9AKS-I
See Page 45
for PM10-2.5 Congurations
See Page 40
for Available Pumps
GN-9AKSB
See Page 28
A for Full-Part
GN-9AKSB (Bottle)
GN-9AKS-I ( Short Stem)
GN-9AKS-IL (Purge Stem)
Can be Sold Separately
52
For Knockout
GN-9AKSA
Assembly
Break-Down
METHOD 202 (CONTINUED ON NEXT PAGE)
800-882-3214 / 919-557-7300
www.apexinst.com
Product
Description
SB-4SD
GN-VCHM-M202
GN-9AKSA
GNFA-3U-18K
GF-3TM
MM5-P
MM5-PM
SB-8
SFA-116IL
SFA-1101T
GA-28S4
SK-0061H
30 Split Umbilical
Impinger Box
Peristalic Pump
PTFE Membrane
Sample Frame
SK-0061H-V
NTG-10UNN
PP907-049
Peristaltic Pump
www.apexinst.com
800-882-3214 / 919-557-7300
53
Model
Description
GF-2
GF-2X6.5
Model
Description
GF-2Q
GF-3
GF-25Q
GF-4
GF-3Q
GF-45
GF-4Q
GF-47
GF-45Q
GF-47Q
GF-63
GF-54Q
GF-90
GF-63Q
GF-2E
GF-3QR
GF-3E
GF-4E
GF-4QR
GF-25E
GF-47QR
GF-47E
GF-90QR
54
Product
Description
Product
Description
GF-2T
GF-3TPG
GF-3T
GF-4TPG
GF-4T
GF-25T
GF-47T
GF-90T
800-882-3214 / 919-557-7300
www.apexinst.com
Description
Model
Description
TF1121
TF1165
GF-3TM
TF1131
TF1141
GF-2590Q
Model
Description
Model
Description
GF-190Q
GF-190
GF-300Q
GF-2590
GF-300
GF-2590Q
Description
GF-300C
GF-300C-C
ACETATE FILTER
GF-47MMAT - FILTER, ACETATE, 47MM, .45 PORE, 100/PK.
This lter is used in the SK-0061H system for sampling Hexavalent
Chromium.
www.apexinst.com
800-882-3214 / 919-557-7300
GF-300C
55
NB-5
NB-8
NB-3
NB-SET
NBT-1/2
NBT-1/2
Model
Description
NB-3
NB-5
NB-8
NB-SET
PBX-S....$111.00
PBT-5/8
PBX-S
PBX- T
Model
Description
Model
Description
PBX-4T
PB- 5/8
Probe Brush/Stainless
Steel, Nylon Bristles
4 PFA Probe
Brush Extension
PBX-6T
6 PFA Probe
Brush Extension
PBX-2
2 Probe Brush
Extension, Stainless Steel
PBX-8T
8 PFA Probe
Brush Extension
PBX-3
3 Probe Brush
Extension, Stainless Steel
PBX-10T
10 PFA Probe
Brush Extension
PBX-12T
12 PFA Probe
Brush Extension
PBK-832
PBT-5/8
B-1
B-1
Filter Recovery
Brush
Filter Brush, 3/16
diameter, Stainless
Steel Handle and
Nylon Bristles, 5/16.
Brush Sold
Separately
B-3
B-3
B-2
Flask Brush
Flask Brush, Stainless Steel
Handle and Nylon Bristles.
B-2
56
B-4
Policeman
Rubber Policeman with
18 Delrin Handle
B-4
800-882-3214 / 919-557-7300
www.apexinst.com
25433-062
25373-1100
12175-001
25373-187
Polypropylene Funnel
Top Diameter 108mm.
30255
Graduated Cylinder
250ml, Glass
250ML-CYL
Nylon Tweezers
TW-1
MS-1
TW-1
250ML-CYL-PMP
250ML-CYL-PMP
Cotton Balls
Synthetic Cotton Balls
(For Impinger Outlet Filter),
300/bag
Funnel
Graduated Cylinder
250ml, Plastic
Paralm M, Laboratory
Sealing Film, Roll is 2 x 250 ft.
PARA-2X250
WB-500FEP
WB-500FEP
WB-5P
WB-1W - 125 mL vw/Wide Mouth, w/Cap.
WB-2P - 250 mL w/Cap.
WB-5P
GLASS BOTTLES
GSB-250
www.apexinst.com
800-882-3214 / 919-557-7300
57
Features
Patented Sealed Construction is
Airtight, Dust and Moisture Free.
Portable and Stackable with a
Small Footprint.
Model
Description
Specications
DES-10000
Desiccator Cabinet
Secador 1.0 Desiccator Cabinet, 8.4 x 13.4 x 16.3 inches with gasketed door,
built in hygrometer, 15.9lbs., .75 cubic feet
DES-21000
Desiccator Cabinet
Secador 2.0 Desiccator Cabinet, 2.4 x 13.4 x16.3 inches with gasketed door,
built in hygrometer, 2 removable shelves. 15.9lbs., 1.17 cubic feet
DES-31000
Desiccator Cabinet
Secador 3.0 Desiccator Cabinet, 16.4 x 13.4x 16.3 inches with 3 shelves &
gasketed door, stackable up to 3 high, built in hygrometer, 22lbs
DES-40000
Desiccator Cabinet
Secador 4.0 Desiccator Cabinet, Horizontal Prole, 13.4 x 20.4 x 16.3 inches with 2
shelves & gasketed door, built in hygrometer, 24.4lbs., 1.9 cubic feet., horizontal Prole
DES-21115
Auto-Desiccator
Cabinet
Auto Secador 2.0 Auto-Desiccator Cabinet, 12.4 x 1 3.4 x16.3 inches with gasketed
door, built in hygrometer, 2 removable shelves. 15.9lbs., 1.17 cubic feet
DES-21115V
Auto-Desiccator
Cabinet
Desiccator Cabinet, 12.4 x 13.4 x16.3 inches with 2 shelves & gasketed door, built in
hygrometer, 15.9lbs (7.2Kg), 1.17, cubic feet, 220 Volt fan
DES-31115
Auto-Desiccator
Cabinet
Desiccator Cabinet, 16.4 x13.4 x 16.3 inches with 3 shelves & gasketed door,
stackable up to 3 high, built in hygrometer, 24lbs., 110V fan
DES-31115V
Auto-Desiccator
Cabinet
DES-41115
Auto-Desiccator
Cabinet
Desiccator Cabinet, 20.4 x 13.4 x 16.3 inches with 3 shelves & gasketed door,
stackable up to 3 high, built in hygrometer, 23.9lbs., 1.17 cubic feet
DES-41220
Auto-Desiccator
Cabinet
Desiccator Cabinet, 20.4 x 13.4 x 16.3 inches with 3 shelves & gasketed door,
stackable up to 3 high, built in hygrometer, 24lbs., 220 Volt fan
www.belart.com
DES-3164
DES-3164
58
800-882-3214 / 919-557-7300
www.apexinst.com
SG-3/5B
3-5mm Bead SILICA GEL
Blue Indicating, 3-5mm Bead,
12/case, 250 ml per bottle.
SG-KIT
SG-3/5B
SG-KIT
SG-616-25LB
SG-3/5B-55
SG-3/5B-55
SG-616-25LB
SG-616
SG-616N
AH-610-A
AH-610-A
AH-610-CA-6TU
AGS-KDF075
Aluma-Sorb
AH-610-CACR-4TU
AGS-KDF075-A
Mounting Clip for Gas Scrubbing Column
(AGS-KDF075).
AGS-CLIP
Aluma-Sorb
DRIERITE DESICCANTS
Apex Instruments carries both non indicating and indicating DRIERITE. (anhydrous calcium sulfate) Economical to use, it
can be regenerated repeatedly. The indicating DRIERITE is impregnated with cobalt chloride: blue when dry and changes
to pink upon absorption of moisture.
Part Number
Description
13005
14005
23005
24005
24005
www.apexinst.com
800-882-3214 / 919-557-7300
14005
59
EJ-SERIES
Easy to read LCD Display with Backlight
Percentage and Counting
USB or RS-232 Interface Optional
Battery Operated (4 x AA not included)
AC Adapter Included
Pan Size: 5 x 5.5
Check-Weighing Capacity
5 Year Warranty
MODEL
DESCRIPTION
BAL-EJ1500
1500g x 0.1 g.
BAL-EJ3000
3100g x 0.1 g.
BAL-EJ6100
6100g x 0.1 g.
BAL-EJ02
BAL-EJ12
Carrying Case
CALIBRATION WEIGHTS
MODEL
DESCRIPTION
WEIGHT
BAL-W1000ASTM
1 kg.
BAL-W2000ASTM
2 kg.
BAL-W5000ASTM
5 kg.
60
800-882-3214 / 919-557-7300
www.apexinst.com
ANALYTICAL BALANCES
HR-SERIES
Percentage and Counting Modes.
Digital Preset Tare.
One Touch Printing.
Last Digital Suppression.
Standard Underhook.
Optional Rechargeable Battery Pack.
GLP/LIMS/ISO Compliant.
RS-232C Standard.
5 Year Warranty.
MODEL
DESCRIPTION
PAN SIZE
BAL-HR60-C
3.3
BAL-HR120-C
3.3
BAL-HR200-C
3.3
220g/51g x 0.1mg/0.01mg
Semi-Micro with R-232C.
3.6
*BAL-HR202i
MODEL
BAL-W1-100
DESCRIPTION
Weight Set - 1mg-100g
Stainless Steel Calibration Weight Set for Lab Use. Set of 9
Weights Plus Fractional Weights in Wooden Storage Box.
Note: Please check with State Department of Weights and Measurements for calibrations.
www.apexinst.com
800-882-3214 / 919-557-7300
61
PT-CAL-G
PT-CAL-W
Description
DGR-CAL15-LF
Calibration of DGM for Secondary Reference, 15 Point, Low Flow 900, 750, 600,
450, 300 ccm (3 runs at each ow rate).
DGR-CUST
Calibration of DGM for Secondary Reference, 15 Point 1.2, 1.0, 0.5, .035 cfm (35, 30, 21, 15, 11 lpm).
DGR-2VER
DGMC-5A
DGMC-5A-LF
Pre-Test 5 Point Low-Flow (less than 1Lpm) Calibration for Apex Meter Consoles
Service only - 900, 750, 600, 450, 300 ccm.
DGMC-5AD-LF
Pre-Test 5 Point Low-Flow (less than 1Lpm) Calibration for Apex Meter Consoles (Dual)
Service only - 900, 750, 600, 450, 300 ccm.
DGMC-3A
DGMC-3A-LF
Pre-Test 3 Point Low-Flow (less than 1Lpm) Calibration for Apex Meter Console. 900, 600, 300 ccm.
DGMC-3AD-LF
CAL-ORF
DGM-KG2SRD
KG3 METRIC SECONDARY REFERENCE METER
(WIZITKG3)
DGM-110SR
DGM-KG3SR
KG3 DIGITAL SECONDARY REFERENCE METER
FOR XC-5000 DGM
DGM-110SR
62
DGM-KG3-SRD5K
For replacement meters and replacement meter kits
please see Accessories section Page 27d.
800-882-3214 / 919-557-7300
www.apexinst.com
U.S. EPA allows critical orices to be used as calibration standards. The orice calibration set contains ve of our critical
orices with 1/2 quick connects and software. Recalibration recommended annually. Calibration Orice Set, 5 Calibrated
Critical Orices and Spreadsheet Diskette for Method 5.
M5CO-SET
Orice Set Contains the following:
Model
Description
M5CO-40
M5CO-48
M5CO-55
M5CO-63
M5CO-73
Available on CD
W NK
W-NK
Weight
Height
Width
Depth
W-NK-0.5A
4.5kg
420
290
190
W-NK-1A
6.0kg
450
315
210
W-NK-2A
9.0kg
390
350
255
W-NK-2.5A
9.0kg
390
350
255
W-NK-5A
25kg
575
455
295
W-NK-10A
35kg
656
535
380
Model B
Weight
Height
Width
Depth
W-NK-0.5B
4.5kg
420
290
190
W-NK-1B
6.0kg
450
315
210
W-NK-2B
9.0kg
390
350
255
W-NK-2.5B
9.0kg
390
350
255
W-NK-5B
25kg
575
455
295
W-NK-10B
35kg
656
535
380
www.apexinst.com
800-882-3214 / 919-557-7300
63
M5C-3D
DIAL CALIPERS are used for measuring nozzle diameter and inspection
of pitots. Dial Caliper, 0-6/ 150mm Direct inch/Metric Conversion.
M5C-3D
M5C-520
M5A-C
M5A-1.......English Units
Programs included:
Traverse Points Location
Stack Gas Velocity and Volumetric
Flow Rate
Stack Gas Moisture Content
M5A-C
M5A-1M....Metric Units
Stack Gas Saturation Moisture Content
Ideal Nozzle Size and K-Factor
with H Loop
Post-Test Isokinetics
DGM Field Calibration using
Critical Orices
DHM-M100
M5C-2
INC-A300
A300 LEVEL INDICATOR
HANDHELD MANOMETER
INC-A300
M5C-2
DHM-M100
HANDHELD MANOMETER
LCD DISP., Digital Manometer, Method
DHM-28-10
MANOMETER SOFTWARE
Software and cable for Digital
Manometer, HM28 series.
DHM-28-1
DHM-28-10
64
DHM-5825
800-882-3214 / 919-557-7300
DHM-5825
www.apexinst.com
PF- CS
Bored Pipe
Flange
Monorail Kit
Monorail kit, 9 ft includes: 9 ft. single channel
mononrail, chain, L-bracket with hardware,
P501 monomount and P2751 trolley assembly.
P1000-9K
10
12
Part #
P1000-6
P1000-7
P1000-8
P1000-9
P1000-10
P1000-12
Probe
Size
10
12
14
16
17
18
Part #
P1001-10
P1001-12
P1001-14
P1001-16
P1001-17
P1001-18
Probe
Size
Trolley Monorail
Part #
P2751
P501
Description
Flanges
Size
Part #
PF-3CS
PF-4CS
PF-6CLS
Description
Flange, 150 lb. FF, Bored, Threaded, Stainless Steel, with Threaded Coupling
Size
Part #
PF-2T
PF-3T
PF-4T
PF-6T
PF-3TA
PF-4TS
Description
Threaded 304
Flange, 6 OD,
4-3/4 Bolt Circle
Diameter.
Carbon Steel
Threaded Pipe
Flange, 150 lb.,
Pattern, 7-1/2
OD, 6 Bolt Circle
Diameter.
Carbon Steel
Threaded Pipe
Flange, 150 lb.,
Pattern, 9 OD,
7-1/2 Bolt Circle
Diameter.
Carbon Steel
Threaded Pipe
Flange, 150 lb.,
Pattern, 11 OD,
9-1/2 Bolt Circle
Diameter.
Carbon Steel
FNPT Threaded
Pipe Flange,
150 lb., Pattern,
7-1/2 OD, 6 Bolt
Circle Diameter,
Cast Aluminum
FNPT Threaded
Pipe Flange,
150 lb., Pattern,
9 OD, 7-1/2 Bolt
Circle Diameter,
Stainless Steel
www.apexinst.com
800-882-3214 / 919-557-7300
65
To
Multiply By
Area
Square Feet (ft2)
929.0304
Square Meter (m )
0.09290304
144
2
6.4516
Feet (ft....)
Centimeters (cm)
30.48
Feet (ft....)
Meters (m)
0.3048
Feet (ft....)
Inches (in)
12
Inches (in)
Millimeters (mm)
25.4
Inches (in)
Centimeters (cm)
2.54
Pounds (lb)
Grains (gr)
7000
Pounds (lb)
Grams (g)
453.59237
Grains (gr)
Grams (g)
0.06479891
Kilograms (kg)
Pounds (lb)
2.2046226
Kilogram-force (kgf)
Newton (N)
9.80665
Pound-Force9 (lbf)
Newton (N)
4.44822
Kelvin (K)
K = C + 273.15
F = 9/5 (C + 32)
R = F + 459.67 = 1.8k
C = 5/9 (F -32)
1 X 103
Horsepower (hp)
Watts (W)
745.7
33445.7
Kilowatts (kW)
9.8095
3414.43
Kilogram-Calories (kcal)
0.252
1055.06
25.4
Length
Mass/Force
Temperature
Pressure
Inches of Mercury (in Hg)
Inches of Mercury (in Hg)
13.6
Atmospheres (atm)
0.0334211
Kilopascals (kPa)
3.386388
Atmospheres (atm)
Bars (bar)
1.01325
Atmospheres (atm)
14.695949
2
Pascals (Pa)
1.0
35.314667
Liters (l)
28.136847
Liters (l)
1000
Volume
Cubic Meters (m3)
3
66
800-882-3214 / 919-557-7300
www.apexinst.com
www.apexinst.com
800-882-3214 / 919-557-7300
67
20oC (68oF)
760mm Hg (29.92in Hg)
Correct to x% O2
20 .9 x%O 2
C s @ x % O2 = C s
20 .9 %O 2 ( dryactual )
68
To Convert From
To
Multiply By
Parts-per-million(ppm) SO2
2.66 x 106
Parts-per-million(ppm) SO2
1.660 x 10-7
Parts-per-million(ppm) NOx
1.912 x 106
Parts-per-million(ppm) NOx
1.194 x 10-7
800-882-3214 / 919-557-7300
www.apexinst.com
NOMENCLATURE
An
As
Bws
Cp
Cp(std)
cs
De
Dn
p
(p1/2) avg
%EA
Fd
Fo
H@
H
%I
K
K
Kp
L
m
Md
Ms
pmr
Pb
Ps
Pstd
Qaw
Qsd
w
Ts
Tstd
Tamb
Vcr
Vm
Vlc
W
Y
www.apexinst.com
800-882-3214 / 919-557-7300
69
METHOD 30B
METHOD 6B
METHOD 11
HYDROGEN SULFIDE IN
PETROLEUM REFINERY
FUEL GAS STREAMS
METHOD 15A
METHOD 16A
METHOD 18
METHOD 26
HYDROGEN HALIDES
& HALOGENS
METHOD 106
METHOD 308
METHANOL
DETERMINATION OF SAMPLING
LOCATION AND TRAVERSE POINTS
METHOD 2
DETERMINATION OF STACK
GAS VELOCITY AND VOLUMETRIC
FLOW RATE
METHOD 3
METHOD 4
DETERMINATION OF MOISTURE
IN STACK GASES
METHOD 5
DETERMINATION OF PARTICULATE
EMISSIONS FROM STATIONARY
SOURCES
METHOD 5B
NONSULFURIC ACID PM
METHOD 8
METHOD 12
METHOD 13A
METHOD 13B
TOTAL FLUORIDES
METHOD 17
PARTICULATE BY IN-STACK
FILTRATION
METHOD 23
METHOD 26A
HYDROGEN HALIDES
& HALOGENS, ISOKINETIC
METHOD 29
MULTIPLE METALS
METHOD 201A
METHOD 202
CONDENSABLE PARTICULATE
MATTER
METHOD 306
METHOD 316
VOLATILE ORGANIC
COMPOUNDS (VOST)
METHOD 0031
METHOD 0040
METHOD 0051
HYDROGEN CHLORINE
AND CHLORINE
METHOD 3B
METHOD 7
DETERMINATION OF NITROGEN
OXIDE EMISSIONS FROM
STATIONARY SOURCES
IRM EQUIPMENT
METHOD 3A
DETERMINATION OF OXYGEN
AND CARBON DIOXIDE
CONCENTRATIONS IN EMISSIONS
FROM STATIONARY SOURCES
METHOD 6C
DETERMINATION OF SULFUR
DIOXIDE EMISSIONS FROM
STATIONARY SOURCES
FIGURES
METHOD 7E
DETERMINATION OF NITROGEN
OXIDES EMISSIONS FROM
STATIONARY SOURCES
METHOD 10
DETERMINATION OF CARBON
MONOXIDE EMISSIONS FROM
STATIONARY SOURCES
METHOD 25A
DETERMINATION OF TOTAL
GASEOUS ORGANIC
CONCENTRATION USING A
FLAME IONIZATION ANALYZER
SEMIVOLATILE ORGANIC
COMPOUNDS
METHOD 0011
FORMALDEHYDE, OTHER
ALDEHYDES AND KETONES
METHOD 0061
HEXAVALENT CHROMIUM
70
METHOD 4A
METHOD 6
METHOD 6A
800-882-3214 / 919-557-7300
www.apexinst.com
www.apexinst.com
800-882-3214 / 919-557-7300
71
Software
XC-8U
XC-6000EPC
919-557-7300 or 800-882-3214
Contact: info@apexinst.com
Fax: 919-557-7110
www.apexinst.com
IRM EQUIPMENT
Some of the most common gaseous sampling methods (low ow rate) are
Incorporated into 40 CFR Part 60 instrumental reference methods (IRMs) where
specic stationary source pollutants are measured continuously by means of an
analytical instrument either to determine compliance with an applicable emission
standard or to conduct performance testing of a continuous emission monitoring
system (CEMS). The most commonly known instrumental methods are: Method 3A
- Oxygen and Carbon Dioxide, Method 6C - Sulfur Dioxide, Method 7E Nitrogen
Oxides, Method 10 Carbon Monoxide, Method 20 Nitrogen Oxides, Sulfur Dioxide
and Diluent Emissions from stationary gas turbines.
Janet Nichols
Sales Manager
jnichols@apexinst.com
Doug Bernhardt
Sales / Customer Service
dbernhardt@apexinst.com
John Stauber
International Sales
john@apexinst.com
Mick Zulpo
Director of Sales & Marketing
mzulpo@apexinst.com
ACCESSORIES
APPENDIX
INDEX
XC-6000EM MercSamplerTM
Console shown
with Stirling Cooler
Featuring the
Automated line of
MercSamplerTM Consoles
XC-30B
MercSamplerTM Console
SK-606 Method 6
MercSamplerTM
Audit Kit
www.apexinst.com
SK-0031 SuperVost
FEATURED METHODS
Apex Instruments has Gas and Mercury Sampling
Equipment for the Following Methods.
METHOD
DESCRIPTION
MERCURY
METHOD 30B
METHOD 4A
METHOD 6
METHOD 6A
METHOD 6B
METHOD 7
Nitrogen Oxides
METHOD 11
Hydrogen Sulde in
Petroleum Renery
Fuel Gas Streams
METHOD 15A
METHOD 16A
METHOD 18
METHOD 26
METHOD 106
METHOD 308
Methanol
METHOD 0030
Semi-Volatile Organic
Compounds (VOST)
METHOD 0031
METHOD 0040
800-882-3214 /919-557-7300
3a
MercSamplerTM Software
Cabinet
MercSamplerTM
Console
Stirling Gas
Conditioner
Reliable and
Easy To
T Use
Leak Test:
Automated pre-test leak check with variable
vacuum and an Automated post-test leak check.
Calibration:
This application provides electronic documentation that is
stored with each test run.
Alarm:
MODBUS Idle Time Out
Proportional Tolerance
Thermocouple (Trap, Probe, Chiller)
High Vacuum
External Flow Signal Loss Return from Power Failure
The HgCalc Software uses sample run data and trap analysis. The
sample run data from the MercSampler XC-6000 is imported into
the application, where total mercury mass, hourly and total mercury
emissions are calculated. The software insures the specications
in 40CFR, part 75 are met. The software will also verify QA/QC
specications regarding Section 2 breakthrough, relative deviation,
and Section 3 in PS 12B.
4a
800-882-3214 /919-557-7300
Laptop
www.apexinst.com
MERCURY
MERCUR
RCURY
Y&G
GAS SAMPLING EQUIPMENT
XC-6000EM MercSampler
System Features:
Packing Gland
Console
Fully Automated Paired Sampling
Accepts Variety Signals
for Proportional Flow Control
Dual Gas Meters with
Optical Encoders (1cc resolution)
External Inputs: Stack Flow,
Remote Pause, Moisture Analyzer
A/C
Heated
Umbilical/
Sample
Line
Pedestal
(Optional)
www.apexinst.com
800-882-3214 /919-557-7300
5a
Features
Status &
Indicator
LEDs
Customer-Friendly Software
and Firmware
Easy Data Export
(Text and CSV les)
Local USB
Ethernet
Connection
Main Power
& Heater
Switches
Local PC
Ethernet
Connection
B Sample
Train
Rotameter &
Volume Meters
A Sample
Train
Rotameter &
Volume Meters
XC-6000EM
Specications
Dry Gas Meters:
Thermocouple Multiplexer:
Sample Pumps:
6a
800-882-3214 /919-557-7300
www.apexinst.com
XC-6K-SW.....Included
Durabook
XC-6000EM LAPTOPS
LT-D14RY
LT-D14RY
LT-LAPTOP
Software Included
Software Features
Test Prole/ Conguration Set-up
Active Test Data
Calibration
Pre & Post Leak Test
Multiple alarm congurations
LT-LAPTOP
Laptop Tray
Sorbent Traps
Features
Modbus
Flow Input
Alarms (Optional Alarm Dialer)
Network
Modbus
Via IP/TCP
www.apexinst.com
800-882-3214 /919-557-7300
7a
SGC-4000HG
Features:
No additional tubing
Free Piston Stirling
Cooler (FPSC)
Digital temperature control
Constant set temperature Closed system, no
condensate pump required.
Integrated heater
Cold
Finger
Hermetically
Sealed in
a Stainless
Steel Casing.
Heat
Exchanger
Compact Air
Cooled
Refrigerant
Module
SGC-4000HG
Rack Mount Shown with XC-6000EM
in 18U Cabinet with AC Enclosure
Specications
Cooling Capacity:
>40 watts
Cooling Block:
Anodized Aluminum.
Condensate Bottle:
1000 ml
(plastic coated glass)
Duel Condensers:
Alloy C276, 1 OD x 4
Reverse Flow Active Zone.
Freeze Protection:
Ambient Operating
Temperature:
0 to 500 C.
Power Requirements:
Rack Mount
Dimensions:
Without Bottles:
17 (W) x 16 (D) x 7 (H)
(43.2cm x 40.6cm x 17.8cm)
Rack Mount
Weight:
Portable Weight:
8a
800-882-3214 /919-557-7300
www.apexinst.com
Cable Specications
Heater Cable
Supply Voltages:
Maintenance Temperature:
250F (120C)
366F (185C)
Description
HGUB-15HD-R
15 PS 12B (Appendix K). Braided Umbilical with Heated Replaceable Dual Sample Lines. (1/4)
for Paired Sampling. 1/8 Full Flow Stainless Steel Quick Connects. Stack Trap & Probe Type K
Thermocouples. Probe Power Cord w/Orange Extruded Jacket. 120VAC.
HGUB-30HD-R
30 PS 12B (Appendix K). Braided Umbilical with Heated Replaceable Dual Sample Lines. (1/4)
for Paired Sampling. 1/8 Full Flow Stainless Steel Quick Connects. Stack Trap & Probe Type K
Thermocouples. Probe Power Cord w/Orange Extruded Jacket. 120VAC.
HGUB-60HD-R
60 PS 12B (Appendix K). Braided Umbilical with Heated Replaceable Dual Sample Lines. (1/4)
for Paired Sampling. 1/8 Full Flow Stainless Steel Quick Connects. Stack Trap & Probe Type K
Thermocouples. Probe Power Cord w/Orange Extruded Jacket. 120VAC.
HGUB-90HD-R
90 PS 12B (Appendix K). Braided Umbilical with Heated Replaceable Dual Sample Lines. (1/4)
for Paired Sampling. 1/8 Full Flow Stainless Steel Quick Connects. Stack Trap & Probe Type K
Thermocouples. Probe Power Cord w/Orange Extruded Jacket. 120VAC.
www.apexinst.com
800-882-3214 /919-557-7300
9a
J- Hook
Heated
Sample Probe
Packing Gland
Heated
Umbilical/Sample
Line
Mercury Probes
Part Identification
HGPA-4-HS
HGPA-6-HS
HGPA-9-HS
HGPA-12-HS
HGPA-AI6
ACP-PAA
Optional Air-Cooled
Probes for Use in High
Temperature Stack
Gas Environments
2 Diameter Stainless
Steel or C276 Outer Sheath.
Air-Cooled Probe with
Single Heater.
Integrated Stack and
Trap Thermocouples.
Blower and Hose Optional.
AIR COOLED BLOWER HOSE
Blower
HGB-VFC20-6U
Blower Hose
Part Number
HGBH-5
HGBH-10
HGBH-15
HGBH-20
Probe
Length
(feet)
Part
Number
HGB-VFC20-6U
HGB-93CFM
HGPA-4-HSC
HGPA-6-HSC
HGPA-9-HSC
HGPA-12-HSC
12
10a
800-882-3214 /919-557-7300
www.apexinst.com
Product
Description
PF-4/40CLS
PF-6/40CLS
PF-40CLUPGRADE
PF-4/6UCLS
Packing Gland
J- Hook
Probe
Accepts Most
Sorbent Trap
Congurations
PACKING GLANDS
Product
Description
PG-32/40CL
PF-4/40CLS
PF-6/40CLS
PG-32/40CL
2 Oversheath
Packing Gland
Flange
Heavy Duty Steel Monorail with Chain, L-Bracket and Hardware (for use with probes).
LF
10
12
Part #
P1000-6
P1000-7
P1000-8
P1000-9
P1000-10
P1000-12
Probe Size
PART #
P2751
Monorail, Trolley - Swivel Frame Trolley with Eyebolt, 1 Foot Chain and Snap-hook.
HGP-1SJ
P1001-10
10 Heavy Duty, Channel, with Chain, L-Bracket & Hardware, for use with lengths over 6.
Add $11 per LF
Description
HGP-SHIELD-S-EXT-6
HGP-SHIELD-C-EXT-6
10MMNU2-S-EXT4D
Stainless Steel Trap Shield (with holes) - Particulate shield for 10mm
sorbent trap with holes, stainless steel nuts and tubing, 4.5 Length x 3/4 O.D.
Requires 2 per probe.
10MMNU2-S-EXT4
Stainless Steel Trap Shield (without holes) - Particulate shield for 10mm
sorbent trap without holes, stainless steel nuts and tubing, 4.5 Length x 3/4 O.D.
Requires 2 per probe.
www.apexinst.com
800-882-3214 /919-557-7300
HGP-SHIELD-S-EXT-6
HGP-SHIELD-C-EXT-6
10MMNU2-S-EXT4D
10MMNU2-S-EXT4
11a
Flange
PF-4/40CLS
Trolley / Chain
P2751
Packing Gland
PG-32/40CL
Heated Dual
Trap Sample Probe
HGP--HS
Mercury Probes
Part Identification
Optional
J-Hook
HGP-1SJ
Portable
Gas Conditioner
SGC-4000HGP
Console
XC-30B
Heated
Umbilical/Sample
Line
HGUBS-HD
Laptop
Included
Automated XC-30B MercSampler
Console & Software
12a
800-882-3214 /919-557-7300
www.apexinst.com
XC-30B
Features
Fully Automated for Paired Sampling
Dual Dry Gas Meters and Mass Flow Sensors
Alerts for Port and Traverse Point Changes
Simple Data Export
Compact Portable System
XC-30B Consoles
Model
Description
USB Interface
XC-30B
XC-30B-V
www.apexinst.com
Active Test
Data
800-882-3214 /919-557-7300
Calibration
Alarm
13a
Main Power
Probe Power
Sample A Exhaust
Advanced
Microprocessor Control
Sample B
Exhaust
Thermocouple
Inputs
AC Power Input
Specications
Dry Gas Meters:
Dual dry gas meters with integrated optical
encoders, resolution to 1 cc
Model K2 positive displacement type.
0.4 liter per revolution.
Optical encoder sensor with quadrature pulse output.
Sample Pumps:
Dual Head Miniature Diaphragm Pumps with
12 VDC motors, Max Vac. 22 Hg
Sample Flow Control:
Stainless steel sample manifolds tted with mass ow
sensors, vacuum sensors, and proportional valves.
Constant ow sampling <300 ccm.
Mass Air Flow: Flow control, 300 to 2500 ccm
Proportional Valve: Voltage Sensitive Orice (VSO), 12 Vdc.
Data Acquisition Control Board (DAC):
Enhanced Flash 16 bit RISC based microcontrollers; main
and Digital Signal Processing (DS). Real time clock with
auto backup and write protection to external SRAM.
High Speed 14bit A/D convertor with parallel DSP interface.
Memory Card for data storage stores up to 99 tests
USB 2.0 Comm Input connection.
14a
Communications:
PC user interface via USB
Thermocouple Multiplexer:
Accepts Type K Thermocouple inputs; input
protection includes gas discharge tubes for ESD
and surge protection.
11 Pic Microcontrollers, 1 for each channel
and MUX circuitry
MUX Circuitry to receive multiple inputs and transmit
selected output.
10 microcontrollers, one for each optically
isolated channel.
Integrated Temperature Control:
Designed into DAC for single probe/trap heater control
output via 25 amp SSR.
Pressure:
Barometric Pressure
600 to1100 mbar, 17.7 to 32.4Hg, temperature
compensated, amplied output.
Vacuum
0 to 30 Hg, 0 to 101 kPa, 2% accuracy.
Durable UHMW Polyethylene Case:
Built-In Handles (Size 10U) 19 Rack Mount Panel
AC Power: 120 Vac 60Hz. / 220 Vac 50Hz
Dimensions: 23in x 21in x 12in (58cm x 53cm x 30.5cm)
Weight: 39 lbs. (17.7kg)
800-882-3214 /919-557-7300
www.apexinst.com
Only Two
Moving Parts.
Hermetically
Sealed in
a Stainless
Steel Casing.
Portable SGC-4000HGP
Heat
Exchanger
Compact Air
Cooled
Free Piston Stirling Cooler Refrigerant
AH-610-PAC
Housing, Adsorption, Assembly
with 1/4 Fittings & lled with
Pural & Activated Carbon.
4MSEL4N-S
1/4 - 1/4 Elbow Connector
Description
GSB-1000SC
GSB-500SC
GA-GL-45S
GA-GL-45B
GA-GL-45B
and GA-GL-45S
GSB-1000SC
GSB-500SC
www.apexinst.com
800-882-3214 /919-557-7300
15a
Features
Dual Independent Flow Paths
Dual Dry Gas Meters with Digital Displays
Coarse and Fine Valves for Precise Flow
and Vacuum Control
Stainless Steel Valves and Fittings
Stainless Steel 1/4 Quick Connects
Consoles
Model
Description
XC-260-A
XC-260-B
XC-260-C
Specications
Dry Gas Meters: Model 25 Series, positive displacement
diaphragm type, 0.7 liters per revolution, optical encoder
sensor with quadrature pulse output, gas volume totalizer
with an eight digit LCD display, 1 cc resolution (standard).
Dual Diaphragm Sample Pumps (2): 12 VDC motors,
Max Vac. 20 Hg.
Probe Temperature Control: Compact, 1/32 DIN auto
tuning indicating temperature controller with external 25
amp solid state relay. 115 VAC outlet 5-15R, Standard
Type-K jack for input.
Description
SC-30B
SC-30B
16a
800-882-3214 /919-557-7300
www.apexinst.com
Mercury Probes
Part Identification
Air
Conditioner
XCP-AC
XC-6000 Cabinet
CR-20U-AC
Hose
HGBH--HD
Blower
Hose
HGBH-
Blower
Assembly
HGB-VFC20
Optional
Pedestal
CR-20U-BASE
www.apexinst.com
800-882-3214 /919-557-7300
17a
Cable Specications
Heater Cable
Supply Voltages:
Maintenance Temperature:
250F (120C)
366F (185C)
Description
HGUB-15HD-R
15 PS 12B (Appendix K). Braided Umbilical with Heated Replaceable Dual Sample Lines. (1/4)
for Paired Sampling. 1/8 Full Flow Stainless Steel Quick Connects. Stack Trap & Probe Type K
Thermocouples. Probe Power Cord w/Orange Extruded Jacket. 120VAC.
HGUB-30HD-R
30 PS 12B (Appendix K). Braided Umbilical with Heated Replaceable Dual Sample Lines. (1/4)
for Paired Sampling. 1/8 Full Flow Stainless Steel Quick Connects. Stack Trap & Probe Type K
Thermocouples. Probe Power Cord w/Orange Extruded Jacket. 120VAC.
HGUB-60HD-R
60 PS 12B (Appendix K). Braided Umbilical with Heated Replaceable Dual Sample Lines. (1/4)
for Paired Sampling. 1/8 Full Flow Stainless Steel Quick Connects. Stack Trap & Probe Type K
Thermocouples. Probe Power Cord w/Orange Extruded Jacket. 120VAC.
HGUB-90HD-R
90 PS 12B (Appendix K). Braided Umbilical with Heated Replaceable Dual Sample Lines. (1/4)
for Paired Sampling. 1/8 Full Flow Stainless Steel Quick Connects. Stack Trap & Probe Type K
Thermocouples. Probe Power Cord w/Orange Extruded Jacket. 120VAC.
18a
800-882-3214 /919-557-7300
www.apexinst.com
Sorbent
Traps
J- Hook
Packing Gland
Single or
Dual Heated
Heated
Sample Probe
Mercury Probes
Part Identification
Heated
Umbilical/Sample
Line
Probe Length
(feet)
12
Stainless
Steel
Stainless
Steel
Single Heate
for HGPHS
Dual Heater
HGPHD
C276 Alloy
C276 Alloy
Dual Heater
HGPHCD
www.apexinst.com
800-882-3214 /919-557-7300
19a
Flange
Mercury Probes
Part Identification
Air Cooled
Probe
HGPA--HS
Hose
HGBH-
HGPA-4-HS
HGPA-5-HS
HGPA-6-HS
HGPA-8-HS
HGPA-9-HS
HGPA-12-HS
HGPA-AI6
HGBH-
HGB-VFC20-6U
HGB-93CFM
Description
HGBH-5
HGBH-10
HGBH-15
Part
Number
HGBH-20
HGB-VFC20-6U
HGBH-30
HGBH-60
HGB-VFC20
HGB-93CFM
HGBH-90
20a
800-882-3214 /919-557-7300
www.apexinst.com
Product
Description
PF-4/40CLS
PF-6/40CLS
PF-40CLUPGRADE
PF-4/6UCLS
Packing Gland
J- Hook
Probe
Accepts Most
Sorbent Trap
Congurations
PACKING GLANDS
Product
Description
PG-32/40CL
PF-4/40CLS
PF-6/40CLS
PG-32/40CL
2 Oversheath
Packing Gland
Flange
Heavy Duty Steel Monorail with Chain, L-Bracket and Hardware (for use with probes).
LF
10
12
Part #
P1000-6
P1000-7
P1000-8
P1000-9
P1000-10
P1000-12
Probe Size
PART #
P2751
Monorail, Trolley - Swivel Frame Trolley with Eyebolt, 1 Foot Chain and Snap-hook.
HGP-1SJ
P1001-10
10 Heavy Duty, Channel, with Chain, L-Bracket & Hardware, for use with lengths over 6.
Add $11 per LF
Description
HGP-SHIELD-S-EXT-6
HGP-SHIELD-C-EXT-6
10MMNU2-S-EXT4D
Stainless Steel Trap Shield (with holes) - Particulate shield for 10mm
sorbent trap with holes, stainless steel nuts and tubing, 4.5 Length x 3/4 O.D.
Requires 2 per probe.
10MMNU2-S-EXT4
Stainless Steel Trap Shield (without holes) - Particulate shield for 10mm
sorbent trap without holes, stainless steel nuts and tubing, 4.5 Length x 3/4 O.D.
Requires 2 per probe.
www.apexinst.com
800-882-3214 /919-557-7300
HGP-SHIELD-S-EXT-6
HGP-SHIELD-C-EXT-6
10MMNU2-S-EXT4D
10MMNU2-S-EXT4
21a
RATA
MT
Method 30 B
K Appendix K
R Appendix K RATA
Blank = No Option
H High Temperature
A Acid Gas
P
High Particulate
C High Temperature
& Acid Gas
S
Speciated
U
S
Unspiked
Spiked (Indicate ng Amount)
Example: MTB-H-S1000
Mercury Trap, Method 30B,
High Temperature, Spiked at 1000ng
Standard
Acid Gases
High Temp
High Temp
& Acid Gas
Section 1
Section 2
Sample Collection Breakthrough
Sections
Section
Breakdown
Part
Number
10 x 185
Standard
2 Sections
MTB-U
10 x 185
High Temp
2 Sections
MTB-H-U
10 x 185
Acid Gases
2 Sections
MTB-A-U
10 x 185
Acid Gases
& High Temp
2 Sections
MTB-C-U
10 x 185
Standard
2 Sections
MTB-S
10 x 185
High Temp
2 Sections
MTB-H-S
10 x 185
Acid Gases
2 Sections
MTB-A-S
10 x 185
Acid Gases
& High Temp
2 Sections
MTB-C-S
Description
22a
800-882-3214 /919-557-7300
www.apexinst.com
Section 2
Section 3
Breakthrough
Section 4
Breakthrough
Description
Mercury Trap, 30B, Speciated,
Unspiked
Sections
10 x 300
4 Sections
Evaluation &
Research
Section
Breakdown
Part
Number
MTB-S-U
Flue gas Oxidized Hg (Hg2+) species are adsorbed by a potassium chloride (KCl). After passing through the
KCl sorbent, Elemental Hg (Hgo) is collected by iodated carbon sorbent. Total Hg (Hgt) is determined by summation of species.
Proper temperature maintenance is critical (<130C) for accurate speciation results. Sorbent trap shields are
used to prevent buildup of particulate, which can potentially oxidize mercury creating a bias.
Thermocouple Simulator
M5C-520
www.apexinst.com
AK-6000-CAL
Annual Verication and Certication of the AK-6000 Audit
Kit. Includes 15-point Calibration of the Reference DGM;
Verication of Vacuum Gauge, Digital Barometer and
Thermometer; System Inspection; and System Test.
36 Thermocouple Type K
TCA-36HG
6 Thermocouple Y Adapter
TCA-6YHG
Handheld Waterproof
Thermometer
DPT-168-NIST
800-882-3214 /919-557-7300
23a
XCP-AC Features
Air Conditioner
Air Conditioner keeps the cabinet at operating temperature while keeping
out dust, fumes, oil and other contaminants. It operates continuously with a
two stage thermostat to ensure a longer compressor life and maintain a 6
temperature range. The integral heater kit includes a thermostat and limiter
for frost protection.
EMI/RFI Suppressor
Internal Corrosion Protection
Two Stage Thermostat
Maintains NEMA 12/3R Rating
XC-10UD
Features
Roto molded uni-body
construction
Molded-in handles
Recessed latches
Interlocking X pattern
for solid stackability
24a
800-882-3214 /919-557-7300
www.apexinst.com
XC-8U
Features
19 Black Polyethylene Roto Molded Shell
Front and Rear Covers
Molded-in Handles
Shock Absorbing Rubber Feet
Recessed Heavy-Duty Twist Latches
Replaceable Steel Thread Front Rails
XC-8U Transport Case
XC-16USA
Features
19 Polyethylene Roto Molded Shell
Front and Rear Covers
Molded-in Handles
Adjustable Elastomer Shock Technology
Corrosive Resistant Polyethylene
Accepts 500 mL Bottles
Assembly includes: Rails, Wiring and
Hardware to accept XCP-6000ECP
and SGC-4000HG
Custom Packaging Available. Call for details!
www.apexinst.com
800-882-3214 /919-557-7300
25a
Flow Meter
A:100-1000ccm
B: 0.2-2.4 Lpm
C: 0.2-4.0 Lpm
V: 240VAC
Features
Flowmeter
Sampler Consoles
Product
Description
MC-623A
MC-623A-V
MC-623B
MC-623B-V
MC-623C
MC-623C-V
Specications
Sample Pump: Double-Diaphragm with12 VDC Motors,
Gas Meter: Positive displacement diaphragm, 45 lpm
maximum and 0.33 lpm minimum recommended ow rate. Max Vac. 20 Hg.
8 digit LCD display with push button reset for volumetric
Power: 120 VAC/60 Hz Standard, 240 VAC/50 Hz Optional.
totalizer. Factory set 0-99999.999 liter totalizer resolution.
Umbilical Connections: Electrical: 4-Pin Circular Connector.
Flowmeters: Solid Machined Acrylic (100-1000 ccm),
(0.2 - 2.4 Lpm), (4.0 Lpm).
Sample Line: 1/4 Quick Connects.
Temperature Control: Compact, 1/32 DIN autotuning
indicating temperature controller with external 25 amp
solid state relays.
Temperature Display: 3.5 digit red LED display, -200C
to 1250C range, 1C resolution with external 6-channel
selector switch. Minihelic Gauge (Pressure) 0 - 100 mm
H2O. Vacuum Gauge 0-30 in Hg.
26a
800-882-3214 /919-557-7300
www.apexinst.com
Features
Precision Gas Meter w/Digital Display
(standard)
Durable UHMW Polyethylene Case
with Built-In Handle
Digital Temperature Display
Needle Valve for Precise Flow Control
Stainless Steel Quick Connect
Digital Elapsed Timer
Up to Five External Temperature Inputs
Dual Scale Vacuum Gauge
Sampler Console
Model
Description
XC-60-A
XC-60-AV
XC-60-B
XC-60-BV
XC-60C
XC-60-CV
Specifications
Gas Meter: Positive displacement diaphragm type 0.7 liters
per revolution. Optical encoder sensor, Gas volume totalizer
with an 8 digit LCD Display, Quadrature pulse output,
1 cc resolution (standard).
Sample Pumps:
Hargrave BTC II Series Pump - Dual head miniature pump,
brush motor, 12VDC. Max unrestricted ow 11 LPM,
Maximum Vacuum Range 0-20 in. Hg.
Probe Temperature Control: Compact, 1/32 DIN autotuning
indicating temperature controller with external 25 amp solid
state relay. 4-Pin Circular Connector, Standard Type-K Jack
for TC input.
www.apexinst.com
800-882-3214 /919-557-7300
27a
Features
Dual Independent Flow Paths
Dual Dry Gas Meters with Digital Displays
Consoles
Model
Description
XC-260
XC-260-V
XC-260-A
XC-260-AV
XC-260-C
XC-260-CV
Specications
Dry Gas Meters: Model 25 Series, positive displacement
diaphragm type, 0.7 liters per revolution, optical encoder
sensor with quadrature pulse output, gas volume totalizer
with an eight digit LCD display, 1 cc resolution (standard).
Dual Diaphragm Sample Pumps (2): 12 VDC motors,
Max Vac. 20 Hg.
Probe Temperature Control: Compact, 1/32 DIN auto
tuning indicating temperature controller with external 25
amp solid state relay. 115 VAC outlet 5-15R, Standard
Type-K jack for input.
Description
SC-30B
2 AlumaSorb cartridges, 2 in-line lters with drains & disposable lter elements in
Enclosure with sample line inputs/sample outputs, dual stream, designed for use
with XC-30B system.
SC-30B
28a
800-882-3214 /919-557-7300
www.apexinst.com
Model
Description
Model
Description
MPS-36H
MPL-36G1
MPL-36G2
MPS-48H
MPL-36G4
MPL-36G5
MPL-48G1
MPL-48G2
MPL-48G4
MPL-48G5
MPL-60G1
MPL-60G2
MPL-60G4
MPL-60G5
MPS-60H
MGA-12S4
MGA-12B4
Model
Description
MGNS-12B
PTFE ADAPTERS
Glass lled PTFE Adapter, 12 mm socket to 5/16
tube tting, MPL probe liner adapter.
MGA-12S5TG
MGA-12SEL4
MGA-12B5TG
www.apexinst.com
800-882-3214 /919-557-7300
29a
Features
SK-606 Method 6
VSB2 VERSACASE
The VSB2 VersaCase is a lightweight portable lab frame ideal for supporting complex glassware setups. Originally
designed to complement the Model 623 Source Sampler Console for Volatile Organic Sampling (VOST). Unit features a pre-punched panel with a combination handle/monorail bracket, coolant reservoir brackets (accommodates
standard modular impinger cases), and removable front and rear doors. Interchangeable probe clamps for 3/4 and 1
sheaths are available. Call for details on customized kits for other testing methods.
Dimensions: HxWxD: 24 x 12 x 11 (61 cm x 30.5 cm x 27.9 cm).
VSB2
VSB Options
Model
Description
PC-3/4
PC-3/4E
MSB-1
ICE-20
SK-0031
VSB2
VSB2
(exterior)
VERSACASE UMBILICAL
The VersaCase Umbilical Cable (VU-) includes
four Type-K thermocouple extensions, 1/4 quick
connects, sample line and three plug-in jacks
terminating in a sturdy aluminum junction box.
Standard with stainless steel ttings and quick
connects. Other lengths available upon request.
Add V to end of product number for
240 VAC/50 Hz option.
30 VersaCase Umbilical with Connection Box,
1/4 stainless steel quick connect.
VU-60
90 VersaCase Umbilical
with Connection Box,
1/4 stainless steel
quick connect.
VU-90
VU-30
30a
800-882-3214 /919-557-7300
www.apexinst.com
MGN-CGS
MIDGET GLASSWARE
Midget Impinger Assembly
Midget Impinger Assembly
with plain stem (#12/5
unground O-Ring ball joints).
MGN-1A
MGN-1AO
MGN-1I
MGN-1IO
Midget Knockout
Impinger Assembly
Midget Knock-out Impinger
Assembly (#12/5 unground
O-Ring ball joints).
MGN-1AK
Midget Impinger Bottle
Midget Impinger Bottle
with unground taper joint.
Midget Connector
L-Connector with
12/5 sockets.
MGN-1B
MGN-6
www.apexinst.com
800-882-3214 /919-557-7300
Midget U-Tube
Midget U-tube with 12/5
unground socket joints.
MGN-2
31a
Glass Adapters
Glass Adapter, #12/5 socket
to #18 thread.
MGNS-12S/18
Glass 3-way Valve with #12/5
unground socket joints.
MGN-3
MGNS-12B/18
MGN-3SB
Description
GA-GL-18B
GA-GL-18S
MGN-12B4
GA-18T6
GA-18T8
MGN-12S4
MIDGET ACCESSORIES
Impinger Outlets
Keck Clip
Plastic Keck Clip, Size 13,
for #12/5 ball joints.
O-Rings
Viton O-Ring for grooved
#12/5 ball.
O-011V
Pinch Clamps
KBS-13
Impinger Outlet with thermocouple
and 1/4 straight tube for use with
PTFE Impingers (MGT-1)
MGS-101
RC-13
O-011V-DZ
BS12
MGA-101
Midget
PFA Impinger
32a
PFA Impingers
Model
Description
MGT-1
MGS-2T6
MGS-3T6
4SC4-PFA
800-882-3214 /919-557-7300
www.apexinst.com
SK-606
SK-606-V
Kit Includes
Glass lined heated probe assembly
Midget glassware set
Sample tray
Nontoxic ice packs
VersaCase4
Probe Clamp
Outlet with thermocouple well
Connecting accessories
Adapters
Seals
Umbilical cable to connect to the XC-60 or
Model 623 Source Sampler Console
VU-30
SK-626
SK-626V
Kit Includes
Extended VersaCase
Probe Clamp
Additional Impingers
Liners
Heated lter assembly
Filters, TFE Membranes
Adapter
Heater assembly
Three way Heated
Assembly valve
www.apexinst.com
800-882-3214 /919-557-7300
33a
Method 26 Accessories
Model
Description
MVH-1
MH-30
MVH-1V
MGN-3SB
TFA-25B
MH-50
TF1165
PC-3/4E
MGN-12B4
MFH-25C
MFH-25CA
MFH-25CAV
SK-0031
SK-0031-V SuperVost
Source Sampling Kit
For Method 0031, with
240Volt Pump.
SK-0031-V
TPFA-4/2
Packing List
34a
800-882-3214 /919-557-7300
www.apexinst.com
SuperVOST Glassware
Model
Description
Set Includes:
PC-3/4
VG-1/18
PC-3/4E
VG-2/18
VG-34/18
VG-54/18
VG-6
4SC4-T
Model
Description
GA-18T8
GA-GL-18B
GA-18T6
10
GA-GL-18B
GA-18C
GA-GL-18/9
GA-GL-18/9
GA-GL-18S
TL-7/5
VG-125
GA-18T6
GA-18T8
Packing List
SK-M180
SK-M180-V
Kit includes
6 gallon airtight stainless steel enclosure
3 Gas sampling bags
Sample pump
PFA tubing
Stainless steel unions and tubing
1/4 Quick connects
4 and 10 gallon enclosures also available
www.apexinst.com
800-882-3214 /919-557-7300
35a
6 gallon
(25 liter)
TBE-4G
6 Gallon stainless steel Bag Enclosure with 1/4 stainless
steel quick connects. Accepts TB-18 x 24-P.
4 gallon
(16 liter)
TBE-6G
10 Gallon stainless steel Bag Enclosure, with 1/4
stainless steel quick connects. Accepts TB-18 x 36-P.
TBE-10G
TBE-4G
Accessories
Model
Description
O-452N50
QC-M4-SS
QC-F4-SS
TBE-6G
TBE-10G
Drum Heater
For heated gas bag sampling up to 150C (300F), Apex Instruments offers a thermostatically controlled exible silicone
rubber drum heater and thermal blanket. The heater is easily attached with quick acting spring latches and the quilted
thermal blanket is attached with snap buttons.
Flexible Silicone Drum Heater
4-10 Gallon with Thermostat,
300 Watts/240 V Adj. 50
to 425F, 110 VAC.
TBE-HEATER
Flexible Silicone Drum Heater
4-10 Gallon with Thermostat,
300 Watts/240 V Adj. 50
to 425F, 220 VAC.
TBE-HEATER-V
36a
Caution:
The heater temperature will
rise rapidly since the drum is
virtually empty. Start with the
thermostat set at the lowest
temperature setting. Do not
use in hazardous locations.
TBE-4G-BKT
TBE-6G-BKT
TBE-10G-BKT
800-882-3214 /919-557-7300
www.apexinst.com
Description
AB-6-P
Altef Sampling Bag, 6 x 6 inch, 0.6 liter with Push-Pull Poly Valve.
AB-7-P
Altef Sampling Bag,7x7 inch, 1.0 liter with Push-Pull Poly Valve.
AB-9-P
Altef Sampling Bag,9x9 inch, 2.0 liter with Push-Pull Poly Valve.
AB-10-P
Altef Sampling Bag,10 x10 inch, 3.0 liter with Push-Pull Poly Valve.
AB-12-P
Altef Sampling Bag,12 x 12 inch, 5.0 liter with Push-Pull Poly Valve with Septum.
AB-12-R
AB-12X19-P
Altef Sampling Bag,12 x 19 inch, 10.0 liter with Push-Pull Poly Valve with Septum.
AB-12X21-P
Altef Sampling Bag,12x21 inch, 12.0 liter with Push-Pull Poly Valve with Septum.
AB-15CM-P
Altef Sampling Bag,15cm x 15cm 0.6 liter with Push-Pull Poly Valve.
AB-18X24-P
Altef Sampling Bag,18x24 inch, 25.0 liter with Push-Pull Poly Valve.
AB-18X36-P
Altef Sampling Bag,18x36 inch, 45.0 liter with Push-Pull Poly Valve.
AB-30-P
Altef Sampling Bag,30x30 inch, 80.0 liter with Push-Pull Poly Valve.
AB-30x36-P
Altef Sampling Bag, 30x36 inch, 100.0 liter with Push-Pull Poly Valve with Septum
ALTEF bags are recommended for most VOCs, if analyzed within 48 hours, and for many sulfer compounds, if analyzed within 24 hours.
Multi-Layer Foil bags are recommended for Methane (CH4), Hydrogen Sulde (H2S), Carbon Monoxide (CO), and Carbon Dioxide (CO2),
if analyzed within 48 hours. Multip-Layer Foil bags can be used to sample most VOCs but are not recommended for collecting low ppm to high
ppb VOCs due to background levels from bag materials
Sampling Pumps
Model
Description
TBP-102A
TBP-102B
TBP-102C
TBP-102D
www.apexinst.com
TBP-102
800-882-3214 /919-557-7300
37a
SK-0040
SK-0040-V
Packing List
Model
Description
VG40-CGS
38a
VG-1/18
3-Way Valve with #18 Threads, Inlet and Purge, 8mm Outlet
VG-34/18
VG-125/18
VG-2/18
13
GA-GL-18B
GA-18T8
10
GA-18T6
18
TPFA-4-047W
TL-7/5
GA-18C
4ET4-PFA
800-882-3214 /919-557-7300
www.apexinst.com
CK-7A9
CK-7A9-V (220V)
Sampling Kit for Method 7
Kit includes
Clamps
Flasks
Sample frame caddy
with probe clamp
Probe assembly
Liners
Valve assembly with
squeeze bulb
Adapters
Evacuation pump
Vacuum Gauge
Temperature controller
Thermometer
Transport case
(not shown)
Link to M7C/7D
Packing List
Kit Includes:
BAR-4198
M5C-520
TCA-36HG
Thermocouple Simulator
M5C-520
36 Thermocouple Type K
TCA-36HG / $32.00
DPT-168-NIST
Handheld Waterproof
Thermometer
DPT-168-NIST
www.apexinst.com
AK-6TH16
800-882-3214 /919-557-7300
TCA-6YHG
6 Thermocouple Y Adapter
TCA-6YHG
39a
M-PCB-DAC-VER
PCB-TC/MUX-VER
EL-EBR-2310
EL-PCB-MODBUS-1
EL-SDCARD
PCB-LED-HG
EL-WBR-1310
DIF-N70
GP-C131-11
GP-D737B-2201
GP-NMP850
TOT4-36X72
Quadrature Pulse Digital Totalizer
36 X 72 DIN.
40a
800-882-3214 /919-557-7300
www.apexinst.com
BARO-A-4V
Barometric Pressure
Sensor, 600 to 1100 mbar,
Temperature Compensated, Amplied Output.
AWM-4360
Airow Sensor, Signal
Conditioning: Amplied;
Flow/Pressure Range: +
6000 sccm (6.0 SLPM);
Linear Range 1LPM; Port
Style: Manifold.
DGM-SK25-360
Used in XC-6000 and XC-30B Meter Consoles.
With Optical Encoder, Signal Cable, Elbows and
Bushings.
DGM-SK25ADPK
Kit to Convert Existing KG2, AP25 Meters to SK25
with Optical Encoder, Adapter Plate & Short Standoffs.
Used in XC-6000 and XC-30B Meter Consoles.
EL-670-OA938
AC Fan 92mm 115VAC
50CFM.
VSO-1SV
Valve, Solenoid,
Proportional
Model VSONC-3S11-IC-FO
Manifold Mount with Wire
Leads and 11.5VDC.
XC-6K-MANI
XC-6K-PGMC
Programming Cable for
XC-6000EM Automated
Mercury Sorbent Trap
Metering Console.
MANI-VSO
SP-PSE541-M5
Sensor, Pressure, 0-30 Hg,
1 NPN/PNP Open Collector
Transistor Output, 30VDC,
125mA.
PFMV-530-1
Airow Sensor, Signal Conditioning:
Amplied Flow/Pressure Range:
+ 6000 sccm (6.0 SLPM) Linear
Range 1LPM Port Style: Manifold
(mass ow controller).
www.apexinst.com
800-882-3214 /919-557-7300
41a
M-CBR10A-M
M-CBR15A-M
EL-PX0842/B
EL-PX0833
UMBILICAL JUMPERS
HGU-6DJ
U-Cord Jumper, Hg, Unheated, Dual. 6 Ft
Umbilical Cable Jumper (Chiller to Console).
Unheated Sample Lines (1/4) for Paired
Sampling.
AM-T3109
AM-T3108
HGU-6DJ-6
U-Cord Jumper, Hg, Unheated, Dual. 6 Ft
Umbilical Cable Jumper (Chiller to Console).
Unheated Sample Lines (1/4) for Paired
Sampling.
Photo
HGU-6DJ-SC
U-Cord Jumper, Hg, Unheated, Dual. 6 Ft
Umbilical Cable Jumper (Chiller to Console).
Unheated Sample Lines (1/4) for Paired
Sampling.
AM-T3110
C16-1 Series Amphenol Circular Connector.
High Grade Plastic for Harsh Environmental
Conditions. Panel Mount male (PINS), 4 pin
AM-T3107000
C16-1 Series Amphenol Circular Connector.
High Grade Plastic for Harsh Environmental
Conditions. Panel-Mount Straight Female Slots,
7 Slot (6 + Ground (First Mate/Last Break).
EL-TL5242W
Memory Backup Lithium Batteries 3.6V 2.1Ah Battery Pack.
42a
800-882-3214 /919-557-7300
www.apexinst.com
M-NOV810
Temperature Controller, Red LED, Novus.
26809
AM-SP100A
M-PCB-REG-A
Regulator PCB Assembly 5V, for Use
with M-PSRS7512.
M-PSRS7512
SSR-330-25
PCB-BATTERY
GA-GL-45S
Pural-SPC5
AC-4X8C4
Carbon, Activated, 4 X 8
Mesh, 4 Lb. Container.
$67.00
AH-610-PAC
Housing, Adsorption,
Assembly with 1/4
Fittings & lled with
Pural & Activated Carbon.
GSB-1000SCA
4MSEL4N-S - 1/4 - 1/4
Elbow Connector
www.apexinst.com
800-882-3214 /919-557-7300
TC-PJK
Thermocouple Jack, Type K, Panel, Snap-In.
43a
10M-F-TG
10MMNU-S
Nut, 10MM Tube, Stainless Steel.
SR-2.625
10M-F-TG
10 M-F-TG-DZ
(Qty. 12)
HGP-SHIELD-S-EXT-6
HGP-SHIELD-C-EXT-6
Mercury Sorbent Trap Shields
HGP-SHIELD-S-EXT Shields
Stainless Steel Trap Shield Available in 3 or
6 Long x 2 O.D. Diameter. Recommended for
short sampling runs, such as those required by
Method 30B.
HGP-SHIELD-C-EXT Shields
C276 Alloy Trap Shield Available in 3 or 6
Long x 2 O.D. Diameter. Recommended for
corrosive environments and long continuous
sampling runs (5 to 7 days).
10MMNU2-S-EXT4
10MMNU2-S-EXT4D
10MMNU2-S-EXT4 Shields
Stainless Steel Tubing,
3/4 O.D. x 4.5 L with two (2) 10mm
stainless steel nuts, welded.
10MMNU2-S-EXT4D Shields
Stainless Steel Tubing,
3/4 O.D. x 4.5 L with two (2) 10mm
stainless steel nuts, welded, and openings
drilled at base of tubing.
HGH-2T144W
Replacement Probe Heater, 2-ft
145 Watts @ 120V
575 Watts @ 240V
(used on all probes, exit end of probe).
HGH-4T463W
Replacement Probe Heater, 4-ft
465 Watts @ 120V.
1275 Watts @ 240V
HGH-5T1650W
Replacement Probe Heater, 5-ft
425 Watts @ 120V
1650 Watts @ 240V
HGH-STRI72
Replacement Probe Heater, 6-ft
500 Watts @ 120V
2000 Watts @ 240V
HGH-9T838W
TC-SP-KA
HGH-12T1000W
Replacement Probe Heater, 12-ft
1000 Watts @ 120V
3400 Watts @ 240V
44a
800-882-3214 /919-557-7300
www.apexinst.com
Mercury
Consoles, MercSampler XC-6000EPC ... 4a-5a
Consoles, MercSampler Firmware.......... 6a
Consoles, MercSampler Software .......... 6a-7a
Consoles, MercSampler Laptops ............ 7a
Consoles, MercSampler
Cabinet Congurations ............................... 8a-9a
Consoles, XC-30B ...................................... 15a 16a
Consoles, XC-260 / App. K / Method30B ... 17a-18a
Gas Conditioners ........................................ 10a-11a
Glassware, Midget ...................................... 26a
Glassware, Midget Accessories.................. 26a-27a
Glassware, PFA Impingers ......................... 23a
Glassware & Sorbent Cartridges ................ 11a
Method30B Source Sampling System ........ 15a-16a
Method 6 (SO2) .......................................... 28a
Method 7 Sampling Equipment .................. 34a
www.apexinst.com
800-882-3214 /919-557-7300
45a
Hours of Operation:
Monday through Friday from 8:00 am
until 5:00 p.m. (EST).
Apex Instruments, Inc.
204 Technology Park Lane
Fuquay-Varina, NC 27526 USA
In U.S. Call Toll Free:
1-800-882-3214
Local: 1-919-557-7300
fax: 1-919-557-7110
e-mail: info@apexinst.com
www.apexinst.com
46a
Delivery:
Most orders are shipped within 24 hours of receipt. Please allow extra
time for custom orders. Shipping times vary according to the requested
shipping service. If you have questions about your shipment please
email our shipping management at shipping@apexinst.com.
Return Merchandise Authorization
Customers wishing to return items for service or credit need to contact
our sales associates for an RMA. Contact by email at sales@apexinst.
com or by phone (919) 557-7300 or toll free (800) 882-3214.
Pricing
Prices are published for U.S. customers only. International customers
should contact their local distributor. Prices are in U.S. Dollars, FOB
shipping point, or Ex Works for International orders. Please conrm
current prices by phone, fax or email. Please refer to our price list for a
complete list of part
numbers and kit congurations.
Payment
For your convenience, MasterCard, VISA and American Express are
welcome. Company purchase orders are accepted upon credit approval.
800-882-3214 /919-557-7300
www.apexinst.com
Probes
Manometers
Inclinometers
919-557-7300 or 800-882-3214
Contact: info@apexinst.com
Fax: 919-557-7110
www.apexinst.com
Janet Nichols
Sales Manager
jnichols@apexinst.com
Doug Bernhardt
Customer Service
dbernhardt@apexinst.com
John Stauber
International Sales
john@apexinst.com
ACCESSORIES
APPENDIX
INDEX
Prototype Units
Available for Trial Basis
Call Toll Free: 1.800.882.3214
Email: sales@apexinst.com
4/ 6 Flange Adapter
with 12 extension
(PF46XT32S)
Probe Interface
Module
(2G-Pod)
Accu-Flow
Software
2G U-Cord
(2G-UC-)
Pod Interface
Module
(2G-PM-)
www.apexinst.com
800-882-3214 /919-557-7300
3b
2-D Pitot
The new Apex Instruments 2DPT2 Pitot is capable
of measuring the yaw velocity angle of nonuniform
disturbed air ows. The yaw angle is determined
directly by rotating the pitot to null the pressure
across a pair of symmetrically placed ports on the
pitot head. The yaw angle is measured with a remote inclinometer attached to the probe extension
and digitally recorded. The average gas volumetric
ow rate in the stack or duct is then determined
from the average near axial velocity. 2-D Pitot,
2-Hole Prism Shaped with 1 Sheath Supplied
with 1/4 tube connections.
Accu-Flow Software
(Included in 2G-Pod)
software includes:
Number of probes used
Number of ports
Total number of traverse points to be sampled
Record differential pressure, ow yaw angle,
stack temperature, static pressure and
barometric pressure.
Method 2G POD Contains 2 x 5 Pressure Transducers,1 x 10 Pressure Transducer, 1 Digital Inclinometer, Type K TC Transmitter, Barometric Pressure Sensor
plus Umbilical Connector, 2 Tube Clamp, 5 Barb Connectors, 1 TC Jack.
2DPT2
Probe
Interface Module
2-D Calibration
Apex Instruments 2-D Pitot Tube must always be calibrated before initial use. Recalibration is also required
either within 12 months of its rst eld use or after 10
eld tests, whichever occurs later. Additionally the 2D
pitot shall be is recalibrated before it is used again.
Method 2G, 2-D Pitot Calibration (Wind Tunnel), 60
and 90 fps, yaw angle offset determination.
PT-CAL-2D
INC-A300
4b
DHM28-10
Product
Description
2DPT2
2-D Pitot, 2 hole prism-shaped tip with 1 sheath supplied with Type K thermocouple, 1/4 tube unions, 34 Long.
PT-CAL-2D
Method 2G, 2-D pitot calibration (wind tunnel), 60 and 90 fps, yaw angle offsets determination.
32PTX-6
2-D Pitot Extension, 6, 2 diameter sheath, split collar clamp with 1 ID.
32PTX-8
2-D Pitot Extension, 8, 2 diameter sheath, split collar clamp with 1 ID.
2G-UC-30
2G-UC-60
2G-UC-90
2G-POD
Method 2G POD Contains 2 x 5 Pressure Transducers,1 x 10 Pressure Transducer, 1 Digital Inclinometer, Type K TC Transmitter,
Barometric Pressure Sensor plus Umbilical Connector, 2 Tube Clamp, 5 Barb Connectors, 1 TC Jack. Also includes AccuFlow Software,
Connects to laptop via USB, 2G-POD power and transmits data over current-loop connection.
2G-PM1
2G Single POD Interface Module contains USB HUB and current-loop transmitter for connecting 2G-POD to a single laptop.
2G-PM4
2G MULTI (4) POD Interface Module contains USB HUB and current-loop transmitters for connecting up to 4 2G-PODs to a single laptop.
2G-PM8
2G MULTI (8) POD Interface Module contains USB HUB and current-loop transmitters for connecting up to 8 2G-PODs to a single laptop.
800-882-3214 /919-557-7300
www.apexinst.com
SK-3D52
Meter Console Specications (MC-3D52):
Stack Temperature: Type-K Thermocouple.
Velocity Pressure: (P1-P2) Range 2.5 H2O.
Yaw Null: Bidirectional (P2-P3) Range 2.5 H2O 2.5 Bi.
Pitch Range: Bidirectional (P4-P5) Range 2.5 H2O 2.5 Bi.
Yaw Angle Range: Quadrature Pulse Output, 180 (static >360).
Output Connector: 9 pin D-Sub connector (all outputs are voltage based).
Probe Sensor Inclinometer and Digital Indicator.
INC-AT2-50
INCLINOMETER
ATTACHMENT
MAGNEHELIC +/-.5
GAUGE
AND BRACKET
CLOSE-UP DPT4
5 HOLE PITOT
32M/32F-B
BRASS BUSHING
(BORED)
3DPT4
5 HOLE PITOT WITH 4
FT. SHEATH
PF-346XT32S
UNIVERSAL PORT FLANGE
W/EXTENSION
*PROBE EXTENSION
ASSEMBLY
Optional Accessories:
Magnehelic Gauge:
Magnehelic Bracket:
MAG-2301
MAG-2D-BK
Description
MC-3D52
Digital 3-D Flow Measurement Console Digital Displays for temperature, velocity pressure, pitch pressure, yaw angle.
3DPT2
3-D Pitot, 5 hole prism-shaped tip with 2 sheath supplied with ve 1/8 to 1/4 tube unions.
PT-CAL-3D
3-D Pitot Calibration (Wind Tunnel), 60 and 90 fps, pitch from -30 to 30 degrees
32PTX-4
3-D Pitot Extension, 4, 2 Diameter Sheath, Split Collar Clamp with 1 ID.
32PTX-5
3-D Pitot Extension, 5, 2 Diameter Sheath, Split Collar Clamp with 1 ID.
32PTX-6
3-D Pitot Extension, 6, 2 Diameter Sheath, split collar clamp with 1 ID.
32PTX-8
3-D Pitot Extension, 8, 2 Diameter Sheath, split collar clamp with 1 ID.
3DCALC1.0
3DCalc Method 2F Data Reduction Spreadsheet (MS Excel Workbook), with calibration DDL le and Excel Macro Link.
U-3D-60
U-Cord 60 ft includes 5 pressure lines with 1/4 stainless steel quick connects, signal cable for inclinometer, 1 type K thermal couple extension.
INC-S6-50
Inclinometer, S6 sensor, 360 degrees with 2 probe clamp, quadrature pulse output.
www.apexinst.com
800-882-3214 /919-557-7300
5b
6b
-
Options
TF
TO
16
1 Oversheath
MS
MO
800-882-3214 /919-557-7300
www.apexinst.com
Base
TF
TFR
16
TF16
TFR16
4PT-3
4PT-4
4PT-5
4PT-6
4PT-7
4PT-8
4PT-9
4PT-10
4PT-11
4PT-12
Base
TF
TFR
16
TF16
TFR16
Product
6PT-3
6PT-4
TF32M
TFR32M
6PT-4
6PT-5
6PT-5
6PT-6
6PT-7
32M
6PT-3
6PT-6
6PT-7
6PT-8
6PT-8
6PT-9
6PT-9
6PT-10
6PT-10
6PT-11
6PT-11
6PT-12
6PT-12
PACKING GLANDS
Packing Glands
Product
Description
PG-24T
PG-32S
12MTC12-B
12MTC12-S
16MTC16-B
16MTC16N-S
16MTC16N-SF
12F-GR
16F-GR
Packing Glands
Cam-Lock Packing Glands
www.apexinst.com
800-882-3214 /919-557-7300
7b
Description
Product
MPT-6-133
4SC4-S
4TUR6-S
6RU4-S
6SC6-S
QC-M4-SS
QC-M6-SS
MPT-6-181
MPT-6-218
MPT-6-252
MPT-6-320
MPT-6-421
Description
length in mm
Description
Price
PTB-3
Modular Pitot Body, (without tip) 3/8 Tube, Pistol Grip, 3 Length
$119.00
PTE-2
$96.00
PTE-3
$119.00
PTE-4
$142.00
Purchase Separately
Description
Includes 3/8 I.D. PTFA tubing and type K thermocouple, stainless steel 3/8 tube unions and quick
connects, all in 5/8 expando.
U-PTX-20
8b
U-PTX-25
U-PTX-50
U-PTX-
800-882-3214 /919-557-7300
www.apexinst.com
Description
PT2C-24
PT2C-36
PT2C-48
PT2C-60
Description
2DPT2
PT-CAL-2D
32PTX-6 2-D
32PTX-8 2-D
2G-UC-25
2G-UC-50
2G-UC-100
2G-SW
2-D Pitot, 2 hole prism-shaped tip with 1 sheath supplied with Type K thermocouples, 1/4 tube unions, 34 Long.
Method 2G, 2-D pitot calibration (wind tunnel), 60 and 90 fps, yaw angle offsets determination.
2-D Pitot Extension, 6, 2 diameter sheath, split collar clamp with 1 ID.
Pitot Extension, 8, 2 diameter sheath, split collar clamp with 1 ID.
25 2G cable with 7 pin, circular connectors.
50 2G cable 7 pin, circular connectors.
100 2G cable 7 pin, circular connectors.
Accu-Flow Software, included with 2G-POD. Includes worksheets for Methods 1-4 and assists user in collecting
data points for Methods 2F / 2G / 2H.
2DCalc Method 2F data reduction spreadsheet (MS Excel Workbook), with calibration DDL le and Excel Macro Link.
2DCALC1.0
Description
SK-3D52
5 Hole Prism
Shaped with 4
foot Sheath
System Includes: Digital 3-D Flow Measurement Console, 3-D Pitot, 5 Hole
Prism Shaped with 4 ft., Sheath, 3-D Pitot Extension, 2 Diameter Sheath, 1/4
TFE Lines - 10 ft., Universal Probe Extension Flange Fits 3,4, & 6 Ports, 2
Bored Brass Bushing, 2 MNPT with 2.035 Bore, 3-D Pitot Calibration (Wind
Tunnel), Remote Inclinometer Sensor, 60 ft., 3-D U-Cord.
PT-CAL-3D
www.apexinst.com
800-882-3214 /919-557-7300
9b
Description
PF-346T32S
PF-346XT32S
PF-346T32S
PF-4/6U32-S
PF-4/6UB-S
PF-4/6UCLS
PIPE FLANGE
Product
Description
PF-4PG38S
4 Pipe Flange, 150 lb Pattern with 2 Pipe Packing Gland (For Use
with Probes with Pitot Option, Pipe Outersheath), Stainless Steel
PF-346S
Flange Plate with 2-3/8 Hole for 2 Pipe. Fits 3, 4 & 6 Ports, SS
PF-46XT32S
Description
PF-2T
2 Threaded 304 Flange, 6 OD, 4-3/4 Bolt Circle Dia. Carbon Steel
PF-3T
PF-4T
PF-6T
PF-3TA
Product
Description
PF-3/40CLS
PF-4TS
PF-3CS
PF-6TS
PF-4BS
PF-3T16
PF-6BS
PF-4T16
PF-4CLS
PF-4CS
PF-4/40CLS
PF-6/40CLS
PF-6/48CLS
PF-6CLS
10b
Product
Description
PFC-2.5S
PFC-2S
Description
PF-3BLS
3 Pipe Flange, 150 lb RF, Blind, Raised Face, 7-1/2 OD, 6 Bolt
Circle Diameter, Stainless Steel
PF-4BLS
PF-6BLS
800-882-3214 /919-557-7300
www.apexinst.com
Oversheath
Packing Glands
Cam-Lock
Packing Glands
Packing Glands
360 DEGREE COMPASS ROSE FLANGE
PG-32/40CL
PF-4/40CLS
PF-6/40CLS
PF-4/6UCLS
OVERSHEATH PACKING GLANDS
Product
Description
Product
Description
PF-346T32A360
PG-24T
PG-32S
PG-32/40CL
PG-38/48CL
3 Oversheath Packing Gland, Stainless Steel body, CamLock, For use with Pitot Version Mercury Probes with
Pipe Oversheath
PF-346XT32S360
Description
PFC-40S-CL
Description
PG-32F
PG-32NT
PG-38F
PG-38RT
PG10-4N
PG200-4N
Description
12MTC12-B
12MTC12-S
16MTC16N-B
16MTC16N-S
16MTC16N-SF
12F-GR
16F-GR
Reducing Couplings
REDUCING COUPLINGS
Product
Description
PF-346PG38
Product
Description
64RUC32-CS
48RUC32-CS
Reducing Bushings
Bored Bushings
REDUCING BUSHINGS
BORED BUSHINGS
Product
Description
Product
Description
32M/16B-B
64M/32F-CS
32M/24B-B
48M/32F-CS
32M/32B-B
32M/16F-B
32M/24F-B
www.apexinst.com
800-882-3214 /919-557-7300
11b
Description
VUA-561
VUA-562
VUA-565
VUA-575
VUA-SERIES LOW
FLOW ADAPTERS
The OFM-Series Orice Flow Meters all feature a calibrated, stainless steel critical orice with two liquid-lled vacuum gauges
and stainless steel inline lter. All ttings, including the orice and lter, are made of stainless steel and include 1/4 tube tting
end connections. These adapters are used with vacuum pumps to provide constant sample ow rates. Orice sizes range from
4 to 35 providing ow rates from 0.076 Lpm to 6.1 Lpm.
OFM-SERIES ORIFICE FLOW METERS
Product
Description
OFM-K4-14
OFM-K4-4
OFM-K4-6
OFM-K4-7
OFM-K4-8
OFM-K4-9
OFM-K4-HG
12b
Product
Description
KFR-4A40SNVT
KFR-4A44SNVT
KMR-3A13SVVT
KMR-3A23SVVT
KMR-3A14SVVT
KGS-SERIES
KGR-SERIES
800-882-3214 /919-557-7300
www.apexinst.com
Description
Features:
200-510H
200-510L
200-510M
200-520H
200-520L
200-520M
200-530H
INCLINOMETERS
200-530L Defender 530 Standardized and Volumetric Primary Flow
Standard, Low Flow Range 5 ml to 500 ml/min; +/- 1% of reading volumetric; Standardized Accuracy: +/- 1.2% of reading+
200-530M
INC-A2T-50
INC-A2T-50
INC-D205
INC-A2T-50
PROTRACTOR / INCLINOMETER
The M5C-4 Protractor/Inclinometer is an ideal tool for measuring cyclonic yaw angles in accordance with Method 2. The
machined aluminum frame and integral baseplate provide a light, rigid and ultra precise platform allowing the state-of-the-art
sensor to provide unsurpassed accuracy throughout the 360 range. The inclinometer can be securely attached to probe with
one of the following mounting brackets.
M5C-4
M5C-4-16
Bracket for M5C-4 with 2 Aluminum Clamp.
M5C-4-32
INC-A300
M5C-4
INC-A300
www.apexinst.com
800-882-3214 /919-557-7300
13b
Features:
Digital Pressure Display
Type-K Temperature Display
Voltage Output Signals
Durable Compact Cabinet
Stainless Steel 1/4 Quick Connects
Terminal Strip - Output Signal
DPT-B1
TRANSDUCER DISPLAYS
Product
Description
DPT-B1
DPT-B2
DPT-B5
25 Transducer
Specications:
Pressure Range: 0.1. Temperature Display Accepts Type-K Thermocouple. Resolution 1C or F; Range: -157 to 1999F;
Supply Voltage +/- 5Vdc; Ratiometeric based 0.25 to 4.0 Vdc, 120V/50-60Hz; Power: 120 VAC/60 Hz;
Dimensions: HxWxD 6 x 7 x 8.5; (15.2 cm x 17.8 cm x 21.6 cm).
TRANSDUCERS/TRANSMITTERS
M-TC4C
M-DP-10
M-DP-10 TRANSDUCER
/ TRANSMITTER
Features:
Features:
14b
M-DP-10 TRANSDUCER/TRANSMITTER
10 Inch Single Transducer, Gage 0-10 Inch. Populated Printed Circuit
Board with One 0-10 H2O. Mounted in Plastic Enclosure. 12VDC
Supply Required. Sensor Ranges (1, 2.5, 5, 10 and 20) Add B for
bidirectional.
THERMOCOUPLE TRANSMITTER
4 Channel Thermocouple Transmitter. 4.4 x 2.4 x 1.1
ABS plastic enclosure with terminal blocks. Designed
using Analog Devices AD595CQ TC amplier with cold
junction compensation. Low input impedance and +/- 1
degree C accuracy.
M-DP-10
M-TC4C
800-882-3214 /919-557-7300
www.apexinst.com
DHM-5825
Features:
DHM28-10
Features:
Microprocessor Based
Differential Gage, or Absolute
High Accuracy, 0.2%, 0.1%, or 0.5%
with Calibration Certicate
Selectable Scales
Resolution to 0.000 of Selected Unit
Input Range; US 0-10 in H2O,
Metric 0-2.5 kPa, Overpressure
12.5 kPa (50 in H2O)
Accuracy, 0.20% Full Scale 1 Digit
Hold Function
Programmable Display
Memory for up to 964 Readings
Output for Optional Printer or
Computer Interface
Link to Pitots
DHM-5825
DHM28-10
DHM-M100
Features:
Lightweight and Ergonomic
Sealed Membrane Type with
4 Dome Style Contact Buttons
Measure Differential - Range 0 to
28.00 H2O
8 Selectable Engineering Units:
Inches of H2O at 20C, mm of H2O
at 20C, mm of Hg at 0C, Inches
of Hg at 0C, kPa, mBar, Bar, PSI
and User Selectable
English/Metric Units
DHM-M100
www.apexinst.com
800-882-3214 /919-557-7300
15b
M-115
INCLINED PORTABLE MANOMETER
Inclined Portable Manometer with a range of-.05 to 0.25.
Features:
1 Thick Acrylic Plastic Body
M-115
Standard Pitot
Adjustable Reective
Chrome Finish
CASE with
M-115AV KIT
Parallax-Free Reading
166-12
DELUXE METHOD 2
PRETEST SURVEY KIT
The Deluxe Method 2 Pretest Survey Kit contains a modular
pitot tip and extension for stacks up to 12, a digital hand held
manometer, thermocouple thermometer, tubing, reducers, unions
and exible
thermocouples.
The kit is package
in a sturdy, foam-lined
case. Custom kits
available. Alternative
manometer options
available upon request.
SK-DM2D
SK-DM2D KIT & CASE
M-400K
Features:
1 1/4 Thick Acrylic
Plastic Body
3/16 Bores, Accurate to
.0002
Selected gauge oil
Ground Glass
Bubble Level
Parallax-Free Reading
O-Ring sealed
Fluid Level plunger
Adjustment
SK-DM2
SK-DM2M
M-400G
INCLINED/VERTICAL
PORTABLE MANOMETER
Portable Inclined/Vertical Manometer with a range of 0 to 10.
ROLL-UP MANOMETER
Roll-Up Manometer, Range 18-0-18,
quick shut off hose barb connections.
M-400G
Standard Pitot
M1211-36
16b
CASE with
M-400K KIT
160-18
800-882-3214 /919-557-7300
160-18
www.apexinst.com
STANDARD MEASURE
MAG-2000-6MM
0 to 6 mm H2O
MAG-2000-00
0-1/4 H2O
MAG-2000-0
0- / H2O
MAG-2000-25MM
0 to 25 mm H2O
0 to 50 mm H2O
0 to 100 mm H2O
1 2
MAG-2001
0-1 H2O
MAG-2000-50MM
MAG-2002
0-2 H2O
MAG-2000-100MM
MAG-2005
0-5 H2O
MAG-2010
0-10 H2O
A-369
Stand, Aluminum, 5
/ Tall
MAG-2000-00
1 2
ANEMOMETERS
LCD display reads airow from 40 to 7800 feet per minute and 0.20 to 40.00 meters per second. Select 2 or 16-second
averaging. Memory recalls highest/lowest readings for any time period, and a HOLD switch freezes the display to capture
a reading. The sensing probe can be handheld or used with the supplied extension wands to increase reach by 5 feet.
Vane is aluminum and case is ABS plastic.
AN-4090
Features:
Range is 40 to 7800 Feet Per Minute and 0.20
to 40.00 Meters Per Second
Resolution is 1 Foot Per Minute or 0.01 Meter
Per Second
Accuracy is 1%
Extension Wand Increases Reach by 5 Feet
Supplied with Two AA Alkaline Batteries
Dimensions: HxWxD 3 x 7 x 3/4
( 7.6 cm x 17.8 cm x 1.9 cm); 8 oz (.23 kg).
AN-4090
AN-4330
Features:
Five Ranges Anemometer Accuracy is (1% full scale + 1 digit)
Temperature Accuracy is 0.8C (1.5F)
Dual thermistors Probe with 40 Cable
Dimensions: HxWxD 7 x 3 x 1.25
(17.8 cm x 7.6 cm x 3.2 cm); 9.5 oz ( .23 kg)
AN-4330
www.apexinst.com
800-882-3214 /919-557-7300
17b
AN-A031
Features:
Single Probe Capable of Measuring Air Velocity
and Temperature Simultaneously
Built-In-Memory Allows Storage of Measured Data
Highly-Visible LCD is Capable of Displaying
Air Velocity and Temperature
Carrying Case, Operation Manual
RS-232C Cable, AC Adapter, 6x AA Batteries
and Software (for Windows)
Data can be Reviewed On-Screen, Printed, or
Downloaded to a Computer
AN-A031
Specications:
Air Velocity Range: 20-6000fpm (0.10-30 Om/s). Air Velocity Accuracy: +/-2%
of reading or +-3fpm whichever is greater. Temperature Range: -4 to 140.0 F
(-20 to 60.0C). Temperature Accuracy: +/-1C). Data Logging: Up to 800
measurements. Probe Type: Straight. Probe Dimensions: Length 39.4 in. (100
cm) - Telescopic / Diameter of Tip; 0.236 in.
BAROMETERS
Handheld Digital Barometer
Handheld Digital Barometer measures altitude, temperature, and barometric pressure. Also has
a stopwatch/time of day clock and graphically displays the barometric pressure trend. Barometric
pressure trend shows current reading and previous 2-, 4-, 6-, 8-, 10-, and 12 hours in bar-chart
format. Barometric pressure reading is updated every 15 minutes. Altitude is displayed in meters or
feet. Reading is updated every 2 seconds. Features a minimum/maximum memory for the altitudes
reached during any time period.Temperature display is updated every 10 seconds. Clock displays the
time of day to the minute and shows the date and month. The clock also features a format of 12-/24hour timing and an alarm.
BAR-4198
Specications:
Barometric pressure: Measures 15.90 to 31.01 Hg with a resolution of 0.03 Hg and from 400 to 1070
mbar with a resolution of 1 mbar with accuracy: 0.2363 Hg (8 mbar). Altitude: -500 to 7000 meters
(-1640 to 22,965), with a resolution of 1 meter or 1 foot. Thermometer displays: -40.0 to 158.0F and
-40.0 to 70.0C with a resolution of 0.1, accuracy is 1C. Stopwatch: times from 1 second to 99 hours,
59 minutes, 59 seconds Resolution is 1 second and accuracy is 0.01%
BAR-4198
BAR-4195
Specications:
Barometer measures pressure from 23.45 to 31.01 (inHg) with a resolution of 0.03
inHg,(794 to 1050 mbar) Accuracy is 0.1477 inHg (5 mbar) Display relative
humidity with a resolution of 1% Accuracy is 5 RH Temperature range is from 32
to 131F and 0 to 55C Temperature accuracy is 1C
18b
800-882-3214 /919-557-7300
www.apexinst.com
TC-4015
Specications:
Range: -328 to 2498F and -200 to 1370C. Resolution: 0.1 and 1. Accuracy: 1C between -50C
to 740C, otherwise 2C. Dimensions: 3.25 x 7 x 1.5 ( cm x cm x ); 8 oz ( kg).
TC-4015
2 CHANNEL THERMOMETER
Provides recessed front panel adjustable offsets on two channels allowing user to adjust thermometer
exactly to a specic temperature, in-house calibration, or particular sensor for increased accuracy.
Provided rubberized case makes it a virtually environment-proof instrument for all weather, shock,
and abusive conditions. Supplied with Velcro wrist strap. Built-in stand makes it ideal for lab bench.
Large LCD display shows temperatures of probe 1, probe 2, or the difference (delta) of the two probes.
Readout in F and C. Extra-large, 3/4-inch-high display is readable from 12 feet. Max button captures
the highest reading achieved. HOLD button freezes display to capture current reading. Uses all Type-K
thermocouples. Supplied with two immediate-response probes which indicate temperature changes in
less than one second.
TC-4135
Specications:
Range: -58 to 2000F and -50 to 1300C with1 resolution. Accuarcy: is 0.3% plus 1C.
Dimensions: HxWxD 2.75 x 5.25 x 1.25 ( cm x cm x cm); 5.25 oz
TC-4135
WORKHORSE THERMOMETER
Type-K Workhorse Thermometer provides a sharp readout in dim and very bright light, long
battery life (150 to 200 continuous hours), high accuracy, wide temperature range, and a new
chip design for an ultra low Price. Recessed front panel adjustable offset allows user to adjust
thermometer exactly to a specic temperature, in-house calibration, or a particular sensor for
increased accuracy. HOLD button freezes display to capture current reading. Supplied with bench
stand. It is compatible with all Type-K probes. Supplied with fast response Type-K probe, bench
stand, 9-volt battery, and carrying case. Cable length of 40 inches.
TC-4425
Specications:
TC-4425
Range: -58.0 to 2372F and -50.0 to 1300C. Accuracy: (1C + .75%) between 0 to 500C; (1C
+ 1%) 500 to 750C; (1C + 2%) 750 to 1000C; (3C + 4%) 1000 to 1200C; 2C at 20; 3C at
40; and 4C at 50). Resolution: 0.1 between 50.0 to 200.0 and 1 elsewhere
Probe dimensions: length is 5 and .175 diameter . Thermometer Dimensions: 2.75 x 5.5 x 1.25 (
cm x cm x cm); 6 oz ( kg).
WATERPROOF THERMOMETER
Waterproof Thermometer has membrane switches, ABS body, and stainless steel probe, good for use in labs, plants, washdown areas, and the eld. Unit eliminates the dangers inherent in breakable glass and toxic mercury thermometers. It displays
minimum and maximum readings over any period. Unique holder allows probe to be positioned at any height while attached
to beakers, stainless cylinders, or vats. Probe guard snaps to handle to extend overall length to 10.75. Readings are updated
every second. Supplied with probe holder, key chain, and lanyard. Operates continuously for 1.5 years on supplied replaceable
silver-oxide battery.
DPT-168-NIST
Specications:
Range: -58 to 572F and 50 to 300C. Resolution: is 0.1 from 20 to 200
(1 otherwise). Accuracy: 0.4C or 1.5C. Dimensions: stem length, 3.25
inches; stem diameter is 0.14; overall length is 7.25. Weight is 1 oz.
www.apexinst.com
800-882-3214 /919-557-7300
DPT-168-NIST
19b
B12-7012
B12-7012
DEW-POINT/WET-BULB/HUMIDITY/THERMOMETER
Monitor shows current, minimum, and maximum displays and includes a
settable high/low alarm for all four readings (dew-point, wet-bulb, humidity,
temperature). Alarm may be set in 0.1 increments, it sounds for one minute
and red LED ashes until readings return to non-alarm condition. Meets
federal requirements for CLIA specication 493.1207 for monitoring temperature and humidity. Supplied with two AA alkaline batteries for continuous,
1-year always on monitoring, and Traceable Certicate. LCD digits are
1-inch-high. Case is high-impact, chemical-resistant ABS plastic.
HUM-4410
HUM-4410
Specications:
20b
800-882-3214 /919-557-7300
www.apexinst.com
Model
Description
WK-PP-24
24GA-Solid, Polyvinyl
WK-PP-24S
24GA-Stranded, Extension
WK-HH-24
WK-TT-24
WK-TT-24S-SB
WK-XC-24
WK-125CI
RUBBER BUSHINGS
TYPE-K THERMOCOUPLES
Type-K Thermocouple Assembly with standard plug, inconel
sheath, magnesium oxide insulation, 1/8 outer diameter.
Maximum Temperature 1800F.
TC-MRB
TC-RB
TC-PJ-MK
Connector, Mini,
Type-K, Female,
Cord Mount.
Includes: Plug,
Cover, Screws &
Bushing.
TC-MJ-KA
www.apexinst.com
800-882-3214 /919-557-7300
Connector, Type-K,
Female, Cord
Mount, (standard
size). Includes:
Plug, Cover, Screws
& Bushing.
TC-LJ-KA
Connector, Type-K,
Male, Cord Mount,
(standard size).
Includes: Plug, Cover,
Screws & Bushing.
TC-LPS-KA
21b
22b
Probes
800-882-3214 /919-557-7300
Manometers
Inclinometers
www.apexinst.com
Circular Stack
Example showing circular stack cross section divided into
12 equal areas with location of traverse points indicated.
Number
of traverse
points
Traverse
Point
Distance
% of diameter
1
2
3
4
5
6
4.4
14.7
29.5
70.5
85.3
95.6
9
12
16
20
25
30
36
42
49
Matrix layout
3x3
4x3
4x4
5x4
5x5
6x5
6x6
7x6
7x7
INPUT PARAMETERS
Area of stack (m2) or (ft2)
= pr2 or p (D/2)2 or L x W
As
= _________
Cp
= _________
=
1/2
1/2
or (in. H2O)
Ts
( p )
avg
= _________
= _________
Pbar
= _________
Pg
= _________
Ps
= _________
Bws
= _________
Md
= _________
Ms
= _________
Note:
Note:
CALCULATIONS
vS = Stack gas velocity, m/s or ft... /s
vs = K p x C p x ( p ) avg x
Ts ( avg )
Ps M s
www.apexinst.com
800-882-3214 /919-557-7300
23b
Filters
Flanges
Pre-Filter
GAS ANALYSIS
EQUIPMENT CATALOG
Website: www.apexinst.com
919-557-7300 or 800-882-3214
Contact: info@apexinst.com
Fax: 919-557-7110
www.apexinst.com
Method 3B
Method 4
Method 7
Method 18
Method 0030
Method 0031
Method 0040
Method 0051
Method 3A
Method 6C
Method 7E
Method 10
Method 25A
Janet Nichols
Sales Manager
jnichols@apexinst.com
Doug Bernhardt
Customer Service
dbernhardt@apexinst.com
John Stauber
International Sales
john@apexinst.com
ACCESSORIES
APPENDIX
INDEX
Hours of Operation:
Monday through Friday from 8:00 am
until 5:00 p.m. (EST).
Apex Instruments, Inc.
204 Technology Park Lane
Fuquay-Varina, NC 27526 USA
In U.S. Call Toll Free:
1-800-882-3214
Local: 1-919-557-7300
fax: 1-919-557-7110
e-mail: info@apexinst.com
www.apexinst.com
www.apexinst.com
Delivery:
Most orders are shipped within 24 hours of receipt. Please allow extra
time for custom orders. Shipping times vary according to the requested
shipping service. If you have questions about your shipment please
email our shipping management at shipping@apexinst.com.
Return Merchandise Authorization
Customers wishing to return items for service or credit need to contact
our sales associates for an RMA. Contact by email at sales@apexinst.
com or by phone (919) 557-7300 or toll free (800) 882-3214.
Pricing
Prices are published for U.S. customers only. International customers
should contact their local distributor. Prices are in U.S. Dollars, FOB
shipping point, or Ex Works for International orders. Please conrm
current prices by phone, fax or email. Please refer to our price list for a
complete list of part
numbers and kit congurations.
Payment
For your convenience, MasterCard, VISA and American Express are
welcome. Company purchase orders are accepted upon credit approval.
800-882-3214
800-882-3214 /919-557-7300
/919-557-7300
www.apexinst.com
21c
Pre-Filter Assembly
Flange
Stainless Steel
Camlock
Heated Filter
Enclosure
Poly Camlock
Heated
Sample Line
www.apexinst.com
Gas Conditioners
Flow Control Drawer
Data Acquisition
800-882-3214 /919-557-7300
3c
SFC-2590
SFC-2590
SFC-2590
(Shown with
Tube Union
Adapter)
Length
1/4 Inch FNPT
Blank = No Shroud
P = Particulate Shroud
10 Microns
Description
SSF-64N10
SSF-64N10-P
Description
4MSC4N-S
6MSC4N-S
8MSC4N-S
10MSC4N-S
SSF-64N10-P
4c
800-882-3214 /919-557-7300
www.apexinst.com
Porous Filter
Assembly
IRM Probe
Flange
Stainless Steel
Camlock
Options/Accessories
www.apexinst.com
800-882-3214 /919-557-7300
5c
Heated Filter
Enclosure
Flange
Pre-Filter
Assembly
Stainless
Camlock
Heated
Sample Line
Poly
Camlock
2 OD
2 OD
2 OD
1 OD
Nominal Length
4=1/4
6=3/8
8=1/2
1 Classic
3
4
6
8
10
12
IRM Probes are available with Stainless Steel or Inconel Sheaths, Heated or
Unheated, & with 1/4, 3/8, 1/2, or 5/8 IN O.D. Liners. Additional congurations
& sizes are available. CALL FOR PRICING.
IRM Ceramic Probe Heaters are recommended for temperatures over
500F. (only available with 2 oversheath). Call for Pricing on Special
Inconel & Ceramic Hi-Temp Heaters.
S = Sheath
Sheath
Blank = 1
O2 = 2
6c
800-882-3214 /919-557-7300
www.apexinst.com
2 Probe
Clamp
1 Probe
Clamp
S
SFA-2564HE-A
Description
SFA-2564
3 Port Filter Assembly, 25x64mm, Stainless Steel Filter Assembly, with One 1/4 Input, One 1/4 Output
and one 1/8 FNPT Cal Gas Input Ports, Accepts GF-2564 Filter Elements
SFA-2564-2N6
6 Port Filter Assembly, 25x64mm, Stainless Steel, with total of six (6) 1/8 NPT Ports, Accepts
25X64mm Filter, Used in Tri-Sample Probe
Probe Clamp
Product
Description
SFA-2564HE-AT
Thermostat Controlled Heated SFA-2564 CEM Filter Assembly and Silicone Insulated Enclosure,
Accepts GF-2564 Filter Elements, 1 PC- 1 Probe Clamp, Standard Male Plug, 110V
SFA-2564HE-AV
Heated SFA-2564 CEM Filter Assembly and Silicone Insulated Enclosure, Accepts
GF-2564 Filter Elements, 1 PC- 1 Probe Clamp, Standard Male Plug, 240V
SFA-2564HE-B
Heated SFA-2564 CEM Filter Assembly and Silicone Insulated Enclosure, Accepts GF-2564 Filter
Elements, 2 Probe Clamp, Standard Male Plug, 110V. ** Cable Entry Seal sold separately **
SFA-2564HE-A
Heated SFA-2564 CEM Filter Assembly & Silicone Insulated Enclosure, Accepts GF-2564
Filter Elements
SFA-2564
Description
GF123270K
Filter Cartridge, Borosilicate glass microber with Fluorocarbon resin binder, 12 x 32 mm, Maximum
Temperature 300F, 10/pk
GF123270S
GF125770K
Filter Cartridge, Borosilicate Glass Microber with Fluorocarbon resin binder, 12 x 57 mm, Maximum
Temperature 300F, 10/pk
GF125770S
GF256470K
Filter Cartridge, Borosilicate Glass Microber with Fluorocarbon resin binder, 25 X 64mm, Maximum
Temperature 300F - 10/pk,
GF256470K
Filter Cartridge, Borosilicate Glass Microber with Fluorocarbon resin binder, 25 X 64mm, Maximum
Temperature 300F - 10/pk,
GF2517870K
Filter Cartridge, Borosilicate glass microber with Fluorocarbon resin binder, 25 x 178 mm, Maximum
Temperature 300F, 10/pk
GF2517870S
www.apexinst.com
800-882-3214 /919-557-7300
7c
SFA-116IL
SFA-137G
TFA-122P
760N-2
Filter Housing
8c
Product
Description
Temperature
Rating
Pressure
Filters
SFA-116IL
200C (400F)
5000 PSIG
12 x 32mm, GF123270K,
GF123270S
SFA-H130S-TE
200C (400F)
30 PSIG
25 x 64mm, GF256470K,
GF256470S
SFA-137G
200C (400F)
150 PSIG
25 x 64mm, GF256470K,
GF256470S
TFA-122P
150C (300F)
100 PSIG
12 x 57mm, GF125770K,
GF125770S
760N-2
50C (120F)
100 PSIG
25 x 64mm, GF256470K,
GF256470S
800-882-3214 /919-557-7300
www.apexinst.com
Features
Low Cost Installation, Maintenance and Operation
Low Extractive Flow Rates, Promotes Long Filter Life
Made of Corrosion Resistant Materials
Can be used in Explosion Proof Areas
Specications
A) Material of Construction:
The Eductor Housing, Mantle, Filter Cap and Flange (the Wetted
Parts) are Fabricated from Inconel 600, a Corrosion Resistant
Nickel-Chromium Alloy.
The Heat Exchanger and the Four Inlet/Outlet Tubes are
Fabricated from Grade 316 Stainless Steel.
C) Dimensions:
Vacuum and Calibration lines 0.125 OD.
Dilution Air and Sample out lines 0.25 OD.
All lines supplied with 0.25 OD tube tting attached.
ADP-007
Specications:
Application EPM Thermo, PMI Type in Situ Type Probes.
Remote (Dry Contract) for Cal and Blow Back.
Sample, Bypass and Cal Gas Rotometers.
www.apexinst.com
800-882-3214 /919-557-7300
9c
HSLP-64-100
100 FT Heated Sample Line 3/8 IN & 1/4 IN PTFE lines,
Foam Insulation w/ Oversheath.
Apex Pro-Series
Designed for
Portable Systems
HSLP-64-100
Specications
Temperature Controller
Heavy Duty (High Output) Single Station Digital Temperature Controller,
20A Max, 120V.
ICH-901
ICH-901
Temperature Controller
10c
800-882-3214 /919-557-7300
www.apexinst.com
Features
Fixed or Adjustable Set Points
Four Character LED Display
Fahrenheit or Celsius Operation
with Indication
Sensor Break Protection
ICS-901M
Front View
ICS-901M
Temperature Controllers
Product
Stations
Duty
Controller
Output
Power
ICS-901
One-Station
Standard
Digital
15 Amps
110V
ICS-902
Two-Station
Standard
Digital
15 Amps
120V
ICH-901
One-Station
Heavy
Digital
20 Amps
120V
ICS-CV1*
One-Station
Standard
Analog
Internal
Relay
120V
ICS-901M
*Add C for Celsius or F for Farenheit. Comes with press-to-set digital indicator in diecast
aluminum enclosure. 240 volt operation is available for all controllers. Add V to end of part
number. (e.g. ICS-901M-V).
ICS-902
ICH-901
Heavy Duty (High Output) Single Station Digital Dual Station Digital Temperature Controller,
Temperature Controller, 20A Max, 120V.
Solid State Output Relay, 10A Max, 120V.
ICH-901
ICS-902
ICS-CV1
Temperature Controllers
www.apexinst.com
Product
Stations
Duty
Controller
Output
Power
ICS-CV1*
One-Station
Standard
Analog
Internal Relay
120V
800-882-3214 /919-557-7300
11c
Description
Cooling Capacity
Up to > 65 Watts
Chiller Block
Anodized Aluminum
Flow Rate
Up to 15 LPM
Dew Point
40F
20%
Freeze Protection
80w Heater
15%
Power Requirements
25%
Moisture
10%
5%
0%
5
10
15
The APEX INSTRUMENTS SGC-4000HG STIRLING GAS CONDITIONER/COOLER is specially designed for removing
moisture and acid gases from ue gas samples. This new style gas chiller uses an industrial grade super efcient Free Piston
Stirling Cooler (FPSC) for chilling the gas to a constant dew point. The FPSC has several advantages over the conventional
Rankine Compressor or Thermoelectric Refrigeration units. For example, the FPSC chiller module uses a small quantity of
environmentally safe helium gas as a refrigerant. The module is hermetically sealed in stainless steel casing allowing for fast
and easy installation and replacement when necessary.
Features:
No Additional Tubing or Pumps Free Piston Stirling Cooler (FPSC)
Has Only Two Moving Parts.
Digital Temperature Control
Constant Set Temperature
Temperature Alarm Output
Available in Rack
Mount or
Portable versions
Specications
Freeze Protection 80w Heater
12c
800-882-3214 /919-557-7300
SGC-4000HGP
www.apexinst.com
AFD-510
Specications
Input Cal-Gas Channels:
Flowmeters Standard:
AFD-510
Features
11 Calibration Gas Channels (Including Zero and Span)
5 Output or Analyzer Channels
8 Valved Rotometers for Fine Flow Control/Adjustment
5 Analyzer Rotometers
1 Vent Rotometer
1 Probe Calibration
1 Sample Flow Rotometer
19 Rack Mountable
Designed for Easy Maintenance and Repair
Manual or Automatic Operation
0-0.5 LPM
0-1.0 LPM
0-2.5 LPM
0-5.0 LPM
www.apexinst.com
800-882-3214 /919-557-7300
13c
BUHLER Technologies
A broad range of applications like boiler trim, emission
monitoring, ammonia slip monitoring, combustion efciency,
LEL warning indication or inner atmosphere control require
analyzers with different measuring principles. Bhler offers
optical, paramagnetic and zirconium technologies as well
as tuned diode laser (TDL) gas analyzers. www.buhlertechnologies.com/gas_analysis/products/analysers.
BRAND GAUS
NOx, O2 and NOx-O2 gas analyzers specically designed
for use in continuous emissions monitoring systems
(CEMS) for gas turbines; designed for reliability and
simple operation; with industrial interfaces for continuous
visible diagnostics and intuitive calibration without the
use of delicate character displays or complicated menu
systems. www.brandgaus.com.
ECOM
ECOM America Ltd., manufactures portable emission / combustion
analyzers for many applications. From single gas Oxygen and Carbon
Monoxide analyzers for ue gas testing to multi-gas analyzers measuring
Oxygen, Carbon Monoxide, Nitric Oxide, Nitrogen Dioxide, Sulfur Dioxide,
& Hydrocarbons offered in several congurations, we have instruments
for most combustion applications. Several models are approved and
recognized by Regional, State, and Federal Environmental and Air Quality
Regulatory AgenciesECOM. www.ecomusa.com.
ENVIRONICS Analytics
Known for computerized gas ow instrumentation; especially gas
mixing technology, based on very precise control of thermal mass
ow controllers, combined with Environics computerization and
calibration results in improved accuracy to +/- 1% of setpoint.
www.environics.com.
14c
800-882-3214 /919-557-7300
www.apexinst.com
VIG INDUSTRIES
Offers microprocessor controlled hydrocarbon analyzers; Dual or Single Channel (FID) ame ionization
detector based (GC) gas chromatography, (VOC)
volatile organic compounds, and (THC) total hydrocarbon analyzer systems. www.vigindustries.com/
products.htm.
SERVOMEX
Known for paramagnetic sensing technology and the
development of zirconia, photometric, thick lm and
plasma technologies. The result is high-performance,
cost-effective gas analysis, delivered through a portfolio
of dependable products ranging from portable gas analysers to complex process solutions. www.servomex.
com/servomex/web/web.nsf/en/servopro-1440.
Bacharach
Bacharach, Inc. is a world leader in the design, manufacture, and
service of advanced equipment for the measurement and detection
of gases and liquids. The companys extensive product line includes
instruments that detect, measure, and record combustion and environmental gases, temperature, relative humidity, air velocity, and other air
quality and safety parameters. A full line of refrigerant recovery equipment for residential, industrial, and automotive applications further
extends Bacharachs family of products. www.bacharach-inc.com.
Nova
Nova Analytical Systems Inc. has been designing and manufacturing dependable gas analysis equipment for over 30 years.
Nova offers portable gas analyzers, continuous gas analyzers
and sample conditioning equipment for industrial applications.
Novas integrated approach to design and manufacturing allows us to congure our products to suit each application, while
still being able to offer the best price, long-term reliability and
proven technology in each analyzer. www.nova-gas.com.
www.apexinst.com
800-882-3214 /919-557-7300
15c
VSB3
Packing List
A-350
Orsat Accessories
Replacement Fluids
Model
Description
OG-1V/18
Burette, with 3-way Valve and Water Jacket, PTFE Valve Body,
100 mL, Scale 0-30% x .01
OG-2
Aspirator Bottle
OG-5V
OG-5B
GA-18C
GA-30B
GA-30S
TB-3V-P
TR-5/3
VC2-50
VSB3
VSB2-MP
B39-710
Burrell Cosorbent, solution for
determining Carbon Monoxide in
gas analysis, 8 oz bottles.
B39-720
Burrell Disorbent solution for
determining Carbon Dioxide
in gas analysis, 16 oz, bottles.
B39-730
16c
800-882-3214 /919-557-7300
www.apexinst.com
Fyrite CO2
Duplex Kits
Model
Descritption
Repair Kits
B10-5020
B10-5021
USA Kits
CO2 Testing
Model
Descritption
B10-5000
B10-5032
Model
Descritption
B11-7052
B11-7054
O2 TESTING
Model
Descritption
B10-5011
B10-5046
O2 TESTING
Model
Descritption
B10-5001
Model
Descritption
B10-5012
Rell Kits
Includes two Bottles of Fyrite Fluid, top gasket, screws and envelope of ltering material.
Model
Descritption
B11-7047
B11-7050
Fluids
Model
Descritption
B10-5057
CO2 Fyrite Fluid , Range 0-20% + 60%, 3 (2oz.) Bottles per Case
B10-5060
www.apexinst.com
800-882-3214 /919-557-7300
17c
SFA-116IL
Filter Housing
TFA-122P
SFA-137G
Product
Description
Temperature Rating
Pressure
Filters
SFA-116IL
200C (400F)
5000 PSIG
12 x 32mm, GF123270K,
GF123270S
SFA-H130S-TE
200C (400F)
30 PSIG
25 x 64mm, GF256470K,
GF256470S
SFA-137G
200C (400F)
150 PSIG
25 x 64mm, GF256470K,
GF256470S
TFA-122P
150C (300F)
100 PSIG
12 x 57mm, GF125770K,
GF125770S
760N-2
50C (120F)
100 PSIG
25 x 64mm, GF256470K,
GF256470S
760N-2
Filters
Product
Description
Price
Product
Description
GF123270K
$72.00
GF256470S
GF123270S
$72.00
GF125770K
GF256470K
$84.00
GF125770S
SFA-2564-4N6
Accepts 25 mm x 64 mm Filter.
Accepts 25 mm x 64 mm lter.
SFA-2564-4N6
SFA-2564-V2
18c
Product
GF123270K
GF125770K
GF256470K
GF2517870K
GF123270S
GF125770S
GF256470S
800-882-3214 /919-557-7300
www.apexinst.com
SC-9A
SC-9U
SC-9U
Inlet
SC-9A
SC-9A
PERISTALTIC PUMP
PP927-049
VGC-9A
The VGA-12A Condenser allows the ow of
ice water around the sample stream. Glass
condenser with 3/8 tube unions for inlet and
outlet, 1/4 drain on bottom, water jacket, 2 OD,
12 height.
VGC-9A
VGC-12A
www.apexinst.com
Product
Description
VGC-9
Glass Condenser-9 x 2 OD, 3/8 tube unions for inlet & outlet, 1/4 drain tube. NO SEALS.
VGC-12
Glass Condenser-12 x 2 OD, 3/8 tube unions for inlet & outlet, 1/4 drain tube, water jacket.
NO SEALS.
VGC-12M
Glass Condenser-12 x 2 OD, with GL-18 threads for inlet, outlet & drain, threads accept
1/4 or 3/8 with proper seal, water jacket.
VGC-12MA
Glass Condenser-12 x 2 OD, with GL-18 threads for inlet, outlet & drain, threads accept
1/4 or 3/8 with proper seal, water jacket w/caps & seals.
800-882-3214 /919-557-7300
VGC-12A
19c
20c
800-882-3214 /919-557-7300
www.apexinst.com
Software
Balances
ACCESSORIES CATALOG
Website: www.apexinst.com
919-557-7300 or 800-882-3214
Contact: info@apexinst.com
Fax: 919-557-7110
www.apexinst.com
ACCESSORIES
ACCESSORIES
Janet Nichols
Sales Manager
jnichols@apexinst.com
Doug Bernhardt
Customer Service
dbernhardt@apexinst.com
John Stauber
International Sales
john@apexinst.com
Isokinetic Calculator
& Spread Sheet, Software .....................35d
Accessories Index ...................................36d
APPENDIX
INDEX
ACCESSORIES
Hours of Operation:
Monday through Friday from 8:00 am
until 5:00 p.m. (EST).
Apex Instruments, Inc.
204 Technology Park Lane
Fuquay-Varina, NC 27526 USA
In U.S. Call Toll Free:
1-800-882-3214
Local: 1-919-557-7300
fax: 1-919-557-7110
e-mail: info@apexinst.com
www.apexinst.com
www.apexinst.com
Delivery:
Most orders are shipped within 24 hours of receipt. Please allow extra
time for custom orders. Shipping times vary according to the requested
shipping service. If you have questions about your shipment please
email our shipping management at shipping@apexinst.com.
Return Merchandise Authorization
Customers wishing to return items for service or credit need to contact
our sales associates for an RMA. Contact by email at sales@apexinst.
com or by phone (919) 557-7300 or toll free (800) 882-3214.
Pricing
Prices are published for U.S. customers only. International customers should
contact their local distributor. Prices are in U.S. Dollars, FOB shipping
point, or Ex Works for International orders. Please conrm current prices by
phone, fax or email. Please refer to our price list for a complete list of part
numbers and kit congurations.
Payment
For your convenience, MasterCard, VISA and American Express are
welcome. Company purchase orders are accepted upon credit approval.
800-882-3214 /919-557-7300
3d
ACCESSORIES
CONSOLE
4d
M-PCB-DACV3A
PCB-TC/MUX
EL-EBR-2310
EL-PCB-MODBUS-1
EL-SDCARD
PCB-LED-HG
EL-WBR-1310
DIF-N70
TOT4-36X72
GP-C131-11
800-882-3214 /919-557-7300
DGM-KG2SRD
Secondary Reference Meter (KG-2)
with 15-pt Calibration, Digital Quadrature
Totalizer, Vacuum Gauge, Metric units.
GP-D737B-2201
Pump Diaphragm Hargrave Replacement
Pump for XC-30B and XC-260 Meter Consoles.
www.apexinst.com
ACCESSORIES
CONSOLE
EL-670-OA938
AC Fan 92mm 115VAC
50CFM.
AWM-4360
Airow Sensor, Signal
Conditioning: Amplied;
Flow/Pressure Range: +
6000 sccm (6.0 SLPM);
Linear Range 1LPM; Port
Style: Manifold.
DGM-AP25SRD
Kit Includes:
Secondary Reference Meter
DGM-AP25SRD
Thermocouple Simulator
M5C-520
M5C-520
BAR-4198
EL-TL5242W
DPT-168-NIST
36 Thermocouple Type K
TCA-36HG
6 Thermocouple Y Adapter
TCA-6YHG
TCA-36HG
Handheld Waterproof
Thermometer
DPT-168-NIST
Insulated Ice Bath
AK-6TH16
AK-6TH16
TCA-6YHG
XC-6K-PGMC
Programming Cable for
XC-6000EPC Automated
Mercury Sorbent Trap
Metering Console.
M-CBR10A-M
M-CBR15A-M
Magnetic Type Circuit
Breaker Rocker Switch,
10 Amp. Horizontal Mount.
Typically Used in 120V
Consoles as Probe/Oven
Breaker Switch.
www.apexinst.com
800-882-3214 /919-557-7300
VSO-1SV
Valve, Solenoid,
Proportional
Model VSONC-3S11-IC-FO
Manifold Mount with Wire
Leads and 11.5VDC.
M-AM2312
Valve, 3-WAY, .055/.048
Orice, 12V.
5d
ACCESSORIES
CONSOLE
BARO-A-4V
EL-P1082-031
SP-PSE541-M5
PCB-BATTERY
TC-PJK
COOLER
COOLER
COOLER
26809
AM-SP100A
M-SD31
COOLER
AH-610-A
Housing, Adsorption, Assembly with 1/4
Fittings and Filled with Aluma-Sorb.
COOLER
COOLER
6d
M-PSRS7512
D-60A
M-PCB-REG-A
800-882-3214 /919-557-7300
www.apexinst.com
ACCESSORIES
CONSOLE AND COOLER
PROBE
AM-T3107000
C16-1 Series Amphenol Circular Connector.
High Grade Plastic for Harsh Environmental
Conditions. Panel-Mount Straight Female Slots,
7 Slot (6 + Ground (First Mate/Last Break).
HGH-2T144W
Replacement Probe Heater, 2-ft, 575 Watt.
(used on all probes, exit end of probe).
HGH-4T463W
Replacement Probe Heater, 4-ft, 463 Watt.
AM-T3109
AM-T3108
PROBE
PROBE
HGH-5T1650W
Replacement Probe Heater, 5-ft, 1650 Watt.
HGH-9T838W
HGH-12T1000W
COOLER
HGH-STRI72
Replacement Probe Heater, 6-ft, 2000 Watt.
XC-6K-MANI
Manifold Subassy, XC-6000EPC - Service
Replacement Manifold Subassembly Includes
Vacuum Sensor, Mass-Flow Sensor, 2-Way
Manifold Valve, Proportional Valve, Stainless
Steel Hose Barb Fittings.
www.apexinst.com
SSR-330-25
Relay, SSRT, 25A 110/240V.
800-882-3214 /919-557-7300
7d
ACCESSORIES
PROBE
HGP-STA
Small Trap (6mm) Adapter for Mercury Probes.
Includes 10MTUR6M-S (with 10mm Nut and ferrule) and Three 1/4 Ceramic Ferrules.
SGC-J10-30B
SGC-J5
SGC-J10-6K
HGU-10DJ-SC
HGU-10DJ
U-Cord Jumper, Hg, Unheated, Dual. 10-Ft
Umbilical Cable Jumper (Chiller to Console). Unheated Sample Lines (1/4) for Paired Sampling.
TC-SP-KA
Thermocouple Plug Assembly, Mini,
Type K, Male.
HGU-10DJ-6
U-Cord Jumper, Hg, Unheated, Dual. 10 Ft
Umbilical Cable Jumper (Chiller to Console). Unheated Sample Lines (1/4) for Paired Sampling.
HGP-SHIELD-S-EXT-6
HGP-SHIELD-C-EXT-6
Mercury Sorbent Trap Shields
HGP-SHIELD-S-EXT Shields
Stainless Steel Trap Shield Available in 3 or
6 Long x 2 O.D. Diameter. Recommended for
short sampling runs, such as those required by
Method 30B.
GA-GL-45S
ALUMA-SORB
Activated Alumina Dessicant, Highly Efcient Adsorbent with High Porosity and
Contact Surface. 1/8 Diameter Beads,
2.5Kg (5.5 LB) Container with 80% Active
Alumina (>/= 92%) and 20% Silica Gel.
QC-SGC-M2
QC, Stirling Gas Conditioner, Straight Connector, Ferruless Polytube Fitting, PTF, 1/4
O.D. X.170 I.D. (Heated
U-Cord Sample Line to Stirling,
High-SO2 Connector) Tube-Mount Male.
8d
QC-SGC-F4
QC, Stirling Gas Conditioner, Female,
Coupling Body 1/4 O.D. (Used on
Stirling Cooler Sample in Connection).
800-882-3214 /919-557-7300
HGP-SHIELD-C-EXT Shields
C276 Alloy Trap Shield Available in 3 or 6
Long x 2 O.D. Diameter. Recommended for
corrosive environments and long continuous
sampling runs (5 to 7 days).
QC-PMC2
QC, Stirling Gas Conditioner, Male, Straight
Connector, 1/4 O.D. PTF,
1/8 O.D. X.170 I.D. (Used on Drierite
Cartridge Outlet/Top) Threaded Male.
www.apexinst.com
ACCESSORIES
PROBE
10MMNU-S
10MMNU-S-EXT
10MMNU-C-EXT
4NU-S
SR-2.625
10M-F-TG
10 M-F-TG-DZ
SPARES / CONSUMABLE
GSB-500SC
GSB-250SC
GSB-1000SC
GSB-1000SCA
www.apexinst.com
800-882-3214 /919-557-7300
9d
ACCESSORIES
XC-522 SOURCE SAMPLING CONSOLE (ENGLISH)
XC-572 SOURCE SAMPLING CONSOLE (METRIC)
2
26
M-CBR5A-M
27
M-CBR3A-M
19
M-SD31
Magnetic Type
Circuit Breaker
Rocker Switch
20
XC-10U
Rugged Custom
Molded X-Case
TC-765KF
Temperature
Display
17
QC-MAN-F3
18
QC-MAN-M2
Manometer Quick
Connects
XC-522
16
Dual
Column
Manometer
M-RA911
Rocker Switches
12
MC-T
14
15
DGM-110
Vacuum Gauge
29
M-31302A
DGM-AP25
7-Channel
Temperature
Selector Switch
TC-PJK
25
24
11
23
(Vaccum)
M-49BK
Electric
Receptacle
M-CB15A-M
M-SCKT15A
Power
Connect Inlet
22
Magnetic Type
Circuit Breaker
21
13
AM-MCP
NV3HA-6S
QC-BHF8-SS
QC-BHF4-SS
Standard Stainless
Steel Sample
Quick Connect
Standard Stainless
Steel Pitot Quick
Connects
Umbilical
Cable Power
Connection
Fine Control
Valve
Part Number
Description
TC-765KF
M-SD31
MC-T
M-SCKT15A
M-49BK
M-31302A
TC-PJK
QC-BHF8-SS
QC-BHF4-SS
QC-BHF6-SS
QC-BHM6-SS
B2VH-6S
NV3HA-6S
DGM-110
G301U
M-42210
QC-MAN-F3
Part Number
Description
QC-MAN-M2
XC-10U
M-RA911
AM-MCP
29 DGM-AP25
10d
M-422B
Manometer Level
Adjust
M-422DS
Manometer Zero
Adjust Knobs
28
10
Standard Stainless
Steel Female Pump
Connection (Pressure)
L-441160
Heavy Duty
Panel Latches
QC-BHF6-SS
3439T12
Strap
Color Coded
Thermocouple Jacks
QC-BHM6-SS
B2VH-6S
Coarse
Control Valve
Elapsed Timer
G301U
M-42210
800-882-3214 /919-557-7300
www.apexinst.com
ACCESSORIES
FILTER MEDIA
Apex Instruments offers a wide range of lter media to meet any sampling requirements. Listed below are the standard media
and sizes that Apex Instruments normally stock. Additional materials and sizes are available upon request.
Model
Description
GF-2
GF-2X6.5
Model
Description
GF-2Q
GF-25Q
GF-3Q
GF-4Q
GF-45Q
GF-47Q
GF-3
GF-4
GF-45
GF-47
GF-63
GF-54Q
GF-90
GF-63Q
GF-2E
GF-3QR
GF-3E
GF-4E
GF-4QR
GF-25E
GF-47QR
GF-47E
GF-90QR
www.apexinst.com
800-882-3214 /919-557-7300
11d
ACCESSORIES
PTFE COATED GLASS FIBER FILTERS
PTFE Coated Glass Fiber Filters are constructed from borosilicate microbers and bonded with PTFE. The lters can be folded
& handled without loss of bers. Great for especially low loading rates. Specically recommended for Method 26 & PM10 sampling.
Product
Description
Product
Description
GF-2T
GF-3TPG
GF-3T
GF-4TPG
GF-4T
GF-25T
GF-47T
GF-90T
Model
Description
Model
Description
TF1165
TF1121
GF-3TM
TF1131
TF1141
GF-2590Q
Model
Description
Model
Description
GF-190Q
GF-190
GF-300Q
GF-2590
GF-2590Q
GF-300
Description
GF-300C
GF-300C-C
12d
800-882-3214 /919-557-7300
GF-300C
ACETATE FILTER
GF-47MMAT - FILTER, ACETATE, 47MM,
.45 PORE, 100/PK. This lter is used in the
SK-0061H system for sampling Hexavalent
Chromium.
www.apexinst.com
ACCESSORIES
SAMPLE RECOVERY
NOZZLE BRUSHES
NB-5
NB-8
NB-SET
NBT-1/2
NBT-1/2
Model
Description
NB-3
NB-5
NB-8
NB-SET
PBX-S
PBT-5/8
PBX-S
PBX- T
Model
Description
Model
Description
PBX-4T
PB- 5/8
Probe Brush/Stainless
Steel, Nylon Bristles
4 PTFE Probe
Brush Extension
PBX-6T
6 PTFE Probe
Brush Extension
PBX-2
2 Probe Brush
Extension, Stainless Steel
PBX-8T
8 PTFE Probe
Brush Extension
PBX-3
3 Probe Brush
Extension, Stainless Steel
PBX-10T
10 PTFE Probe
Brush Extension
PBX-12T
12 PTFE Probe
Brush Extension
PBK-832
PBT-5/8
B-1
B-1
Filter Recovery
Brush
Filter Brush, 3/16
diameter, Stainless
Steel Handle and
Nylon Bristles, 5/16.
Brush Sold
Separately
B-3
B-3
B-2
Flask Brush
Flask Brush, Stainless Steel
Handle and Nylon Bristles.
B-2
www.apexinst.com
B-4
Policeman
Rubber Policeman with
18 Delrin Handle
B-4
800-882-3214 /919-557-7300
13d
ACCESSORIES
SAMPLE RECOVERY ACCESSORIES
Aluminum Weighing
Dishes (70 ml)
100/pack.
25433-062
25373-1100
12175-001
25373-187
Polypropylene Funnel
Top Diameter 108mm.
30255
250ML-CYL-PMP
Nylon Tweezers
TW-1
MS-1
TW-1
250ML-CYL-PMP
Graduated Cylinder
250ml, Glass
Cotton Balls
Synthetic Cotton Balls
(For Impinger Outlet Filter),
300/bag
Funnel
Graduated Cylinder
250ml, Plastic
250ML-CYL
PARA-2X250
WB-500FEP
WB-500FEP
WB-5P
WB-1W - 125 mL vw/Wide Mouth, w/Cap.
WB-2P - 250 mL w/Cap.
WB-5P
GLASS BOTTLES
GSB-250
14d
800-882-3214 /919-557-7300
www.apexinst.com
ACCESSORIES
PFA
PFA COLUMN COMPONENTS
PFA Column Components are PFA uorocarbon resin and inert to virtually all chemicals. All are usable for a wide variety of temperature
ranges from below 32F to 500F (0 to 260C). The individual components can be assembled for a variety of uses. Components can be
purchased separately and assemble according to project specications.
VGC-12
Features:
Unbreakable
Leak Tight without Sealants
Grooved for Heat Transfer
$18.00
T501-4
$34.00
T501-4-2
$70.00
T501-6
$38.00
T501-6-2
$51.00
T502
$26.00
T504
$65.00
T504-4
$56.00
T504-6
$57.00
T504-47
$44.00
T504S
$10.00
T570
$40.00
T502
Column
Connector
T504-6 Column Segment
with Fitting
Used in Method 26 for HCI emissions. TFA-25 High Temperature PFA clamp nuts are standard. 1/4 tube ttings. TFA-47
Standard with 1/4 tube unions. Also available with 1/4 male
pipe ttings or 3/8 tube ttings.
TFA-25
TFA-47
T5072
T501-8-2
PFA L-Stems:
T55
T507-3
NTG-10U2
T507-3R
T507-5
T507G
TFA-47
TFA-47-6
TFA-47-6T
T507-1R
8-4-10ET-T
10-4-8ET-T
4MSC2N-PFA
8-4-8ET-PFA
T507-6
www.apexinst.com
4MSEL2N-PFA
T507-2R
TFA-25B
NTG-10F-DZ
PFA U-Stems:
TFA-25
NTG-10F
T507-1
T507-2
Fittings:
Grooved Vessel
800-882-3214 /919-557-7300
15d
ACCESSORIES
BALANCES
EJ-SERIES
PORTABLE BALANCES
MODEL
DESCRIPTION
BAL-EJ1500
1500g x 0.1 g.
BAL-EJ3000
3100g x 0.1 g.
BAL-EJ6100
6100g x 0.1 g.
BAL-EJ02
BAL-EJ12
Carrying Case
CALIBRATION WEIGHTS
MODEL
DESCRIPTION
WEIGHT
BAL-W1000ASTM
1 kg.
BAL-W2000ASTM
2 kg.
BAL-W5000ASTM
5 kg.
16d
800-882-3214 /919-557-7300
www.apexinst.com
ACCESSORIES
BALANCES
ANALYTICAL BALANCES
HR-SERIES
Percentage and Counting Modes.
Digital Preset Tare.
One Touch Printing.
Last Digital Suppression.
Standard Underhook.
Optional Rechargeable Battery Pack.
GLP/LIMS/ISO Compliant.
RS-232C Standard.
5 Year Warranty.
MODEL
DESCRIPTION
PAN SIZE
BAL-HR60-C
3.3
BAL-HR120-C
3.3
BAL-HR200-C
3.3
BAL-HR202i
220g/51g x 0.1mg/0.01mg
Semi-Micro with R-232C.
3.6
MODEL
BAL-W1-100
DESCRIPTION
Weight Set - 1mg-100g
Stainless Steel Calibration Weight Set for Lab Use. Set of 9
Weights Plus Fractional Weights in Wooden Storage Box.
Note: Please check with State Department of Weights and Measurements for calibrations.
www.apexinst.com
800-882-3214 /919-557-7300
17d
ACCESSORIES
DESICCATOR AND DESICCANTS
Acrylic Desiccator Cabinets feature adjustable shelves with grooves for positioning,
removeable lip tray, gasketed door, built-in hygrometer. Cabinets do not include
Desiccant, order separately.
Features
Patented Sealed Construction is
Airtight, Dust and Moisture Free.
Portable and Stackable with a
Small Footprint.
Model
Description
Dimensions
Features
DES-10000
Desiccator Cabinet
DES-21000
Desiccator Cabinet
DES-21115
Auto-Desiccator
Cabinet
DES-21115V
Auto-Desiccator
Cabinet
DES-31000
Desiccator Cabinet
DES-31115
Auto-Desiccator
Cabinet
DES-31115V
Auto-Desiccator
Cabinet
DES-40000
Desiccator Cabinet
13.4 x 20.4 x
16.3,
DES-41115
Auto-Desiccator
Cabinet
DES-41220
Auto-Desiccator
Cabinet
www.belart.com
DES-3164
DES-3164
18d
800-882-3214 /919-557-7300
www.apexinst.com
ACCESSORIES
SILICA GEL
Apex Instruments Silica Gel is primarily used for drying sample gas prior to measurement and can
absorb moisture 40% of its weight. The silica gel can be regenerated by drying in an oven and used
over and over again.
3-5mm Bead SILICA GEL
3-5mm Bead, Indicating, 2.3Kg.
SG-3/5B
3-5mm Bead SILICA GEL
Blue Indicating, 3-5mm Bead,
12/case, 250 ml per bottle.
SG-KIT
SG-3/5B
SG-616-25LB
SG-KIT
SG-3/5B-55
SG-3/5B-55
SG-616-25LB
SG-616
SG-616N
AH-610-A
Adsorption Housing, Carbon Assembly with 3/8
Fittings, 60g of Activated (Iodinated) Carbon,
280g of ALUMA-SORB.
AH-610-CA-6TU
Aluma-Sorb
AH-610-A
AH-610-CACR-4TU
Aluma-Sorb
DRIERITE DESICCANTS
Apex Instruments carries both non indicating and indicating DRIERITE. (anhydrous calcium sulfate) Economical to use, it
can be regenerated repeatedly. The indicating DRIERITE is impregnated with cobalt chloride: blue when dry and changes
to pink upon absorption of moisture.
Part Number
Description
13005
14005
23005
24005
24005
www.apexinst.com
800-882-3214 /919-557-7300
14005
19d
ACCESSORIES
UNIVERSAL PIPE FLANGE & FLANGE REDUCERS
CAM-LOCK, FLANGES,
PORT ADAPTERS & PACKING GLANDS
REDUCING FLANGES
Product
Description
PF-346T32S
PF-346XT32S
PF-346T32S
PF-4/6U32-S
PF-4/6UB-S
PF-4/6UCLS
PIPE FLANGE
Product
Description
PF-4PG38S
4 Pipe Flange, 150 lb Pattern with 2 Pipe Packing Gland (For Use
with Probes with Pitot Option, Pipe Outersheath), Stainless Steel
PF-346S
Flange Plate with 2-3/8 Hole for 2 Pipe. Fits 3, 4 & 6 Ports, SS
PF-46XT32S
Description
PF-2T
2 Threaded 304 Flange, 6 OD, 4-3/4 Bolt Circle Dia. Carbon Steel
PF-3T
PF-4T
PF-6T
PF-3TA
Description
PF-4TS
PF-3/40CLS
PF-6TS
PF-3CS
PF-3T16
PF-4BS
PF-4T16
PF-6BS
PF-4PG38S
PF-4CLS
PF-6PG38S
6 Pipe Flange, 150 lb., Pattern, 11 OD, 9-1/2 Bolt Circle Diameter,
with 2 Pipe Packing Gland, Stainless Steel
PF-4CS
PF-4/40CLS
PF-6/40CLS
PF-6/48CLS
PF-6CLS
20d
Description
PFC-2.5S
PFC-2S
Description
PF-3BLS
3 Pipe Flange, 150 lb RF, Blind, Raised Face, 7-1/2 OD, 6 Bolt
Circle Diameter, Stainless Steel
PF-4BLS
PF-6BLS
800-882-3214 /919-557-7300
www.apexinst.com
ACCESSORIES
Oversheath
Packing Glands
Cam-Lock
Packing Glands
Packing Glands
360 DEGREE COMPASS ROSE FLANGE
PG-32/40CL
PF-4/40CLS
PF-6/40CLS
PF-4/6UCLS
OVERSHEATH PACKING GLANDS
Product
Description
Product
Description
PF-346T32A360
PG-24T
PG-32S
PG-32/40CL
PG-38/48CL
3 Oversheath Packing Gland, Stainless Steel body, CamLock, For use with Pitot Version Mercury Probes with
Pipe Oversheath
PF-346XT32S360
Description
PFC-40S-CL
Description
PG-32F
PG-32NT
PG-38F
PG-38RT
PG10-4N
PG200-4N
Description
12MTC12-B
12MTC12-S
16MTC16N-B
16MTC16N-S
16MTC16N-SF
12F-GR
16F-GR
Reducing Couplings
REDUCING COUPLINGS
Product
Description
PF-346PG38
Product
Description
64RUC32-CS
48RUC32-CS
Reducing Bushings
Bored Bushings
REDUCING BUSHINGS
BORED BUSHINGS
Product
Description
Product
Description
32M/16B-B
64M/32F-CS
32M/24B-B
48M/32F-CS
32M/32B-B
32M/16F-B
32M/24F-B
www.apexinst.com
800-882-3214 /919-557-7300
21d
ACCESSORIES
METER CALIBRATION
CALIBRATION SERVICES
Apex performs both calibrations using a wet test meter and bellprover primary standard. Calibration services are available from Apex
Instruments on a fee per console basis. Extra charge for low ow. All
console and dry gas meter calibrations are conducted in accordance
with U.S. EPA standards. Apex Instruments calibrates source sampler
consoles, reference dry gas meters, orices and pitots.
Description
DGR-CAL15-LF
Calibration of DGM for Secondary Reference, 15 Point, Low Flow 900, 750, 600,
450, 300 ccm (3 runs at each ow rate).
DGR-CU-ST
Calibration of DGM for Secondary Reference, 15 Point 1.2, 1.0, 0.5, .035 cfm (35, 30, 21, 15, 11 lpm).
DGR-2VER
DGMC-5A
DGMC-5A-LF
Pre-Test 5 Point Low-Flow (less than 1Lpm) Calibration for Apex Meter Consoles
Service only - 900, 750, 600, 450, 300 ccm.
DGMC-5AD-LF
Pre-Test 5 Point Low-Flow (less than 1Lpm) Calibration for Apex Meter Consoles (Dual)
Service only - 900, 750, 600, 450, 300 ccm.
DGMC-3A
DGMC-3A-LF
Pre-Test 3 Point Low-Flow (less than 1Lpm) Calibration for Apex Meter Console. 900, 600, 300 ccm.
DGMC-3AD-LF
CAL-ORF
DGM-KG2SRD
KG3 METRIC SECONDARY REFERENCE METER
(WIZITKG3)
w/ 15 pt cal, valve, 5 ft hose, 1/2 inch QC.
DGM-110SR
DGM-KG2SRD
DGM-110SR
DRY GAS METER KG3S W/ REPLACEMENT KIT FOR
AP25 DGM IN XC-572 Replacement Kit for KG3S to replace AP25 DGM in existing model XC-572 meter console.
Includes KG3S DGM with nuts and o-rings, adapter plate,
bushings, standoffs and screws.
DGM-KG3SR
KG3 DIGITAL SECONDARY REFERENCE METER FOR
XC-5000 DGM with 15-pt calibration, digital quadrature
totalizer, vacuum gauge, metric units, 4U black polyethylene
molded case.
DGM-KG3-SRD5K
DRY GAS METER KG3S W/ REPLACEMENT KIT FOR
SK25 DGM IN XC-572 Replacement Kit for KG3S to
replace SK25 DGM in an existing model XC-572 meter
console. Includes KG3S DGM with nuts and o-rings,
adapter plate, support bracket, bushings, standoffs and
screws. The conguration for the replacing the AP25 does
not require the support bracket.
DGM-KG3SKKIT
DGM-KG3APKIT
22d
800-882-3214 /919-557-7300
www.apexinst.com
ACCESSORIES
CALIBRATION EQUIPMENT AND SERVICES
PITOT CALIBRATION SERVICES
NOZZLE CALIBRATION
PT-CAL-G
Wind Tunnel of Type-S Pitot Tube to Method 2.
PT-CAL-W
DIAL CALIPERS
Dial Calipers are used for measuring nozzle diameter and inspection
of pitots. Dial Caliper, 0-6/ 150mm Direct inch/Metric Conversion.
M5C-3D
M5C-520
M5C-520
DHM-M100
M5C-2
INC-A300
A300 LEVEL INDICATOR
HANDHELD MANOMETER
INC-A300
M5C-2
DHM-M100
HANDHELD MANOMETER
DHM-28-10
MANOMETER SOFTWARE
Software and cable for Digital
Manometer, HM28 series.
DHM-28-10
www.apexinst.com
DHM-5825
DHM-28-1
800-882-3214 /919-557-7300
23d
ACCESSORIES
ORIFICE FLOW METERS
The VUA-Series Low Flow Orice Adapters feature a calibrated, critical sapphire orice with liquid lled vacuum gauge, brass
ttings and inline lter to adapt to Apex Instruments isokinetic source samplers for methods requiring low ow sampling. The
adapters are used for VOST and Method 6-type sampling. Adapters include 1/2 male and 1/4 female brass quick connects to
attach the isokinetic source sampler to the VOST VU-cords. Three adapters are offered to provide approximately 1/2, 1 and 2
liters per minute ow rates. The VUA-575 is used for Method 7C to provide the required owrate between 400-500cc/min.
VUA-SERIES LOW FLOW ADAPTERS
Product
Description
VUA-561
VUA-562
VUA-565
VUA-575
VUA-SERIES LOW
FLOW ADAPTERS
The OFM-Series Orice Flow Meters all feature a calibrated, stainless steel critical orice with two liquid-lled vacuum gauges
and stainless steel inline lter. All ttings, including the orice and lter, are made of stainless steel and include 1/4 tube tting
end connections. These adapters are used with vacuum pumps to provide constant sample ow rates. Orice sizes range from
4 to 35 providing ow rates from 0.076 Lpm to 6.1 Lpm.
OFM-SERIES ORIFICE FLOW METERS
Product
Description
OFM-K4-14
OFM-K4-4
OFM-K4-6
OFM-K4-7
OFM-K4-8
OFM-K4-9
OFM-K4-HG
24d
Product
Description
KFR-4A40SNVT
KFR-4A44SNVT
KMR-3A13SVVT
KMR-3A23SVVT
KMR-3A14SVVT
KGS-SERIES
KGR-SERIES
800-882-3214 /919-557-7300
www.apexinst.com
ACCESSORIES
FLOW METERS (ROTAMETERS)
FLOW CALIBRATOR/PISTON PROVER / BIOS Defender 510 and 520 Series are the next generation
of DryCal technology. It is the proven and reliable foundation of all BIOS primary standards, and the
basis of our ISO 17025 accreditation by NVLAP of NIST. Available in low, median or high ranges.
BIOS DEFENDER 510 AND 520 SERIES
Model
Description
200-510H
200-510L
200-510M
200-520H
200-520L
200-520M
Features:
Reliable: 15 years of proven
DryCal performance
Accurate: Backed by ISO 17025;
NV LAP accredited
Portable: Lightweight and impact-resistant
Simple: Quick Start operation and no messy
soap solutions
Streamlined: Bios optimizer software
transfers calibration data directly to any
windows based PC using built in serial port.
INCLINOMETERS
The INC-A2T-50 Inclinometer Sensor is designed for measuring the yaw angle of ow in accordance with Method F&G.
The standard collar is designed for clamping onto 2 tubing. Remote Inclinometer Sensor, 360 degrees with 2 Tube
Clamp and Amphenol Connector has analog voltage output. Alternative clamp sizes are available upon request. This
remote sensor is designed to be used with the 3-D ow console, however it can be used with the Remote Digital Display
(INC-D205). The inclinometer sensor is connected to the display via our standard 4-pin Signal Cable.
PROTRACTOR / INCLINOMETER
INC-D205
INC-A2T-50
The M5C-4 Protractor/Inclinometer is an ideal tool for measuring cyclonic yaw angles in accordance with Method 2. The
machined aluminum frame and integral baseplate provide a light, rigid and ultra precise platform allowing the state-of-theart sensor to provide unsurpassed accuracy throughout the 360 range. The inclinometer can be securely attached to probe
with one of the following mounting brackets.
M5C-4
M5C-4-16
Bracket for M5C-4 with 2 Aluminum Clamp.
M5C-4-32
INC-A300
M5C-4
INC-A300
www.apexinst.com
800-882-3214 /919-557-7300
25d
ACCESSORIES
TUBING
PTFE Tubing
Description
TPFA-/
PTFE-/
PTFE (Tetrauoroethylne) possess the lowest coefcient of friction of any known solid and is used widely
because of its anti-stick properties which allows easy
cleaning. PTFE has chemical resistant qualities and
is unaffected. Working temperature is 500F (260C),
Color is milky white.
Product
Description
TT-2/1
TT-4/2
TT-6/4
TT-8/6
TT-10/8
Inconel Tubing
Apex Instruments Inconel Tubing is made from a nickelchromium alloy with excellent oxidation resistance against
cracking or breaking at higher temperatures. Our Inconel
tubing is corrosion resistant to stress caused by caustic
substances and is often used for thermocouple protection
tubing. The temperature range is -132C to 650C (-205F
to 1200F). Be sure to use with compression ttings. Call
for pricing.
(Per Foot)
PFA Tubing
Polyurethane Tubing
TPFA-4-047W
TPFA-4/2
TPFA-6/4
(Per Foot)
Tubing, PFA, 1/4 ID x 3/8 OD x .062 wall
TPFA-8/6
(Per Foot)
Tubing, PFA, 3/8 ID x 1/2 OD x .062 wall
- (Nominal)
TTO-4
4TS4C-S
TTO-6
6TS6C-S
TTG-10/6
PTFE Probe Liner Material, 5/8 OD, 3/8 ID, Price Per Ft.
26d
TU-4/2
TU-6/4
Polyethylene Tubing
Extruded from linear low density Polyethylene Resin, this
tubing is tough and exible. It is chemical and moisture
resistant and has a wide range of uses in industrial and
agricultural applications.
TP- /
TP-4/2BK
TP-4/2NA
TP-4/2OR
TP-4/2YW
TP-6/4BK
TP-6/4NA
800-882-3214 /919-557-7300
www.apexinst.com
ACCESSORIES
TUBING
VINYL (PVC) TUBING
Plasticized from nontoxic Flexible Vinyl PVC, this tubing offers
a wide range of chemical resistance which makes it an ideal
choice for a variety of industrial piping problems involving the
handling of corrosive, pure or sensitive solutions.
TV- /
TV-4/2
TV-5/3
TV-5/3R
TV-5/3Y
BRAIDED SLEEVING
Durable overbraiding for extra protection against abrasion,
mildew and aging for cable assemblies. This tubing is designed with an open-weave braided type construction, it offers
exibility and freedom of movement to the sleeving and wiring
it covers. This open-weave construction allows complete
drainage to prevent any moisture and condensation to cause
any permanent damage to the inner wire it covers. Normal
operating temperature range is -70C to 125C
(-94F to 257F).
EXP-
- (Diameter)
EXP-2
EXP-8
EXP-12
EXP-20
EXP-30
EXP-30HD
(Per Foot)
DGM-175
MPT-6-181
MPT-6-218
MPT-6-283
MPT-6-320
MPT-6-421
DGM-S275
DGM-110
DGM-AP25
Product
Description
DGM-AP25
DGM-110
DGM-175
DGM-S275
DTM-P4B
DTM-P6B
AIR HOSE
Special Purpose Hose
The Apex Instrumens Air hose is constructed of a PVC/Polyurethane alloy, this hose has a high tensile strength yarn. The
core tube has an excellent cut resistance. It also has a highly
abrasion-resistant alloy jacket and has good exibility over a
wide temperature range of -20C to 85C (0F to 185F).
H- SP
-
H4SP
H6SP
(Diameter)
POLYSPRING HOSE
Apex Instruments Polyspring hose is constructed of a clear PVC
which allows the visual conrmation of product ow. The hose
is resistant to chemicals and has a spiral wire reinforcement to
prevent kinking or collapsing. The hose diameter will not expand
under normal rated working pressures. Its temperature range is
-4C to 65C (25F to 150F). Used on our U-cords.
H-SPS
- (Diameter)
H-10SPS
MPT-6-133
www.apexinst.com
800-882-3214 /919-557-7300
27d
ACCESSORIES
Electrical/Electronic Parts
205-EV-4RCO
M-CB15A
205-PV-3RCO
M-CB10A
M-CB3A
M-IEC-14AWG
M-CB5A
L5-15
L5-30
M-CBR10A-M
L6-20
M-SCKT15A
M-49BK
M-CBR5A-M
Fans:
M-CBR3A-M
AM-CF110
AM-CF220
M-31302A
Switches:
M-31302K
M-RA911
M-4X846
AM-SB500W
AM-SBP5
AM3057
AM3057
AM-SBP
Heaters:
AM-SB500W-220
AM-SB772W
AM3101A-K
AM3106B-K
AM3108S
AM-MCP
AM3102P
Pressure Transducers:
LPM1010-6B5
LPM1010-2B5
Solenoids:
M-U8356-120V
M-U835B-220V
AM-SBP
AM-MCP
AM3101A-K
AM3106B-K
AM3102P
AM3057
AM-SBP5
SSR-330-40
W7800
Video Inspection:
M-42210-M
M-422DS
A-316
DWA101R
QC-MAN-F3
QC-MAN-M2
PMC30
4T827
28d
DWA101-R
Manometer Oil
PMC30
with 4T827
M-1400
Temperature Controllers:
M-1400
M-PXR3-C
800-882-3214 /919-557-7300
www.apexinst.com
ACCESSORIES
STAINLESS STEEL FITTINGS
Tube to Tube Unions
Male Connectors
2MSC2N-S
4MSC2N-S
4MSC4N-S
4MSC6N-S
6MSC6N-S
8MSC6N-S
10MSC6N-S
10MSC8N-S
1/8TU-1/8MNPT
1/4TU-1/8MNPT
1/4TU-1/4MNPT
1/4TU-3/8MNPT
3/8TU-3/8MNPT
1/2TU-3/8MNPT
5/8TU-3/8MNPT
5/8TU-1/2MNPT
Male Elbow
Union
Reducing Union
4MSEL2N-S
4MSEL4N-S
4MSEL6N-S
6MSEL4N-S
6MSEL6N-S
6MSEL8N-S
10MSEL6N-S
10MSEL8N-S
4RU2-S 1/4TU-1/8TU
6RU4-S 3/8TU-1/4TU
8RU6-S 1/2TU-3/8TU
1/4TU-1/8MNPT
1/4TU-1/4MNPT
1/4TU-3/8MNPT
3/8TU-1/4MNPT
3/8TU-3/8MNPT
3/8TU-1/2MNPT
3/8TU-3/8MNPT
3/8TU-1/2MNPT
Thermocouple Connectors
8MTC8-S
1/2TU-1/2MNPT
16MTC16N-S 1.0TU-1.0MNPT
Union Tee
Union Elbow
4ET4-S 1/4TU
6ET6-S 3/8TU
4EE4-S 1/4TU-1/4TU
6EE6-S 3/8TU-3/8TU
8EE8-S 1/2TU-1/2TU
2
Order Sizes
in Order
Shown in
Diagram
3
Male Branch Tee
Jump Tee
4MBT4N-S 1/4TU-1/4MNPT
6MBT4N-S 3/8TU-1/4MNPT
4MRT4N-S 1/4TU-1/4MNPT
6MRT4N-S 3/8TU-1/4MNPT
Port Connectors
Female Elbow
Port Connector
4FEL2N-S 1/4TU-1/8FNPT
4FRT2N-S 1/4TU-1/8FNPT
6FRT4N-S 3/8TU-1/4FNPT
4TUR6-S
6TUR4-S
8TUR10-S
8TUR4-S
8TUR6-S
10TUR6-S
4PC4-S
4PC6-S
6PC6-S
6PC8-S
Other
Cap
4BLEN4-S
6BLEN6-S
8BLEN8-S
10BLEN10-S
www.apexinst.com
Tube Nut
1/4 Cap
3/8 Cap
1/2 Cap
5/8 Cap
1/4TU-3/8TU
3/8TU-1/4TU
5/8TU-1/2TU
1/2TU-1/4TU
1/2TU-3/8TU
5/8TU-3/8TU
1/4
1/4-3/8
3/8
1/2-3/8
4TUBC4-S 1/4TU-1/4STUB
8TUBC8-S 1/2TU-1/2STUB
6MA2N-S 3/8MT-1/8MNPT
6MA4N-S 3/8MT-1/4MNPT
800-882-3214 /919-557-7300
29d
ACCESSORIES
QUICK CONNECTS
Apex Instruments offers many types of Stainless Steel Quick Connects. Brass is available for some
types, please call for details.
QC-F4-SS
QC-BHF4-SS
MANOMETER QC FITTING
Manometer Quick Connect
Fitting, 1/8 FNPT, Chrome
plated Brass with Valve &
Viton O-Ring.
QC-F6-SS
QC-BHF6-SS
QC-MAN-F3
QC-F8-SS
QC-BHF8-SS
FEMALE BULKHEAD
MALE BULKHEAD
QC-BHM4-SS
QC-M6-SS
QC-BHM6-SS
MANOMETER QC FITTING
Manometer Quick Connect
Fitting, 1/4 MHB.
QC-M8-SS
QC-BHM8-SS
QC-MAN-F2
HARDWARE
A-316
CABINET LATCH
SPRING HANDLE
SAFETY BAIL
Safety Bail for Monorail Attachment.
SB-2PIN
M-422DS
RAIL HANGER
Rail Hanger for Source Sampler
Console (Price per Pair).
MC-RH
H50032
Stoppers
CABINET KEEPERS
Latch Keeper, Long Shank
for Hot Box Door.
M-HS14LS
PANEL LATCH
Panel Latch, Slotted.
GS-13
13mm, 10/pk.
GS-20
20mm, 10pk
GS-30
30mm, 10/pk.
GS-MIX
GS-20
GS-30
L-43144
All stoppers are rubber sleeve standard.
GS-13
Seal Ring
CABINET KEEPERS
Latch Keeper, Short
Shank for Source Sampling Console Door.
RUBBER FOOT
Recessed Rubber Foot.
GA-GL-18/10T
9540K59
M-HS83K
30d
800-882-3214 /919-557-7300
www.apexinst.com
ACCESSORIES
PUMPS & ACCESSORIES
DIAPHRAGM PUMPS
KNF
Diaphragm Vacuum Pump, KNF Model
UN815KN, free ow 15 lpm, Ryton
Head, EPDM Diaphragm and valves,
120VAC/50 Hz.
GAST
Gast Model Mini Diaphragm Pump,
6.4 lpm open, 120VAC.
GP-UN815KN
240VAC
GP-15D1
GP-15D1-V
DIAPHRAGM PUMPS
AA404
AB609B
AJ-0523
AJF-0523
AK731
GP-BL50-2
GP-BL50-R
GP10W-250
O-026N
ADI-19319TTM
GP-DAA-V142
GP-DAA-V140
GP-DAA-RBK
GP-15D1
GP-15D1-V
GP-MAA
GP-MAA-V
PERISTALTIC PUMPS
Peristaltic Pumps are useful in a variety of applications. The material to be pumped only comes in contact with the tubing. This is
ideal for applications where the product to be moved or pumped should not touch any foreign materials. Also, peristaltic pumps are
precision ow rate devices with each revolution of the roller assembly delivering a precise amount of gas. Finally, peristaltic pumps
are self-priming and can handle a wide variety of viscosities, from air to gases to heavy slurries.
Economically priced xed-ow peristaltic pumps are available for a wide range of ows. The single head pump PP907-049 comes
with a tube kit consisting of four different pump tubes for adjusting the ow from 0.21 to 3.5 ccm per revolution. Different motor
speeds are available from 2 to 203 rpm. The pump head and enclosure are made of polypropylene. Dual head model also available
PP927-049 which is pre-set for 98 ccm per head.
Single-Speed, Single-Head
Peristaltic Pump, 49 rev/min,
with Tube Kit.
PP907-049
www.apexinst.com
Single-Speed, Single-Head
Peristaltic Pump, 49 rev/min,
with Tube Kit.
PP927-049
800-882-3214 /919-557-7300
31d
ACCESSORIES
EQUIPMENT CASES
ATA Transport Cases
ATA Transport Cases protect your equipment and glassware from
shipping damage. Each case is made of sturdy 3/8 ABS laminated
plywood with reinforced edges and corners. A built-in foam liner
provides added protection. Call for details on custom cases.
TC-XC5
TC-GW2.5
Part #
Dimensions
TC-0523
TC-0523C
TC-522
TC-522U
TC-600
TC-7A9
TC-GW2.5
TC-GW20I
TC-PITOT
TC-SB13
TC-VSB
TC-X0523
TC-XC5
TC-0523
SKB Cases
Apex Instruments now offers multiple black plastic, stackable SKB RotoRack cases to protect your equipment from damage.
Constructed of a molded polyethylene shell which includes front and rear covers and gasket seals to protect the contents from
moisture and dirt. This case offers recessed heavy duty twist latches, molded in handles and shock absorbing rubber feet.
(optional rear rails available for added stability). Call for pricing.
XC-10UD Molded
Rack Case
XC-16US Molded
Rack Case
SUPPLIES
TFE HIGH DENSITY TAPE
TFE Tape, High Density, 1/2 X 520 per roll.
Part #
Dimensions
XC-5U
XC-6U
XC-8U
XC-10U
XC-10UD
XC-16US
SKB-1916
T-TFE8-520
32d
800-882-3214 /919-557-7300
www.apexinst.com
Antiseize, 1/4 oz. Tube, -65F to 2600F
ACCESSORIES
MONORAILS
MONORAIL HARDWARE
(Threaded pipe anges are available in 3,
4 or 6, stainless steel or aluminum.) Note:
The chain must be attached to the stack so
that the chain angle to the monorail is no
less than 30 (45 is recommended).
PF- CS
Pipe Flange
10
12
Part #
P1000-6
P1000-7
P1000-8
P1000-9
P1000-10
P1000-12
Probe
Size
PART #
LF
P1001-10
10
P1001-12
12
P1001-14
14
P1001-16
16
P1001-17
17
P1001-18
18
PART #
P2751
MONORAIL, TROLLEY Swivel Frame Trolley with Eyebolt, 1 Foot Chain and Snap-hook.
P501
PART #
Flange
PF-3CS
PF-4CS
PF-6CLS
Flange, 6 150 lb. FF, 2.67 Bored, Stainless Steel with Cam-lock Connector.
See Accessories Section for Different Congurations.
Link to Flanges
www.apexinst.com
800-882-3214 /919-557-7300
33d
ACCESSORIES
MONORAILS
PART #
P2751
Monorail, Trolley Swivel Frame Trolley with Eyebolt, 1 Foot Chain and Quick Link
P501
PART #
Flange
PF-3CS
PF-4CS
PF-6CLS
Flange, 6 150 lbs. FF, 2.67 Bored, Stainless Steel with Cam-lock Connector
Training Manuals
34d
Part #
Description
40CFR-SET
40CFR1-49
40CFR50-51
40CFR52A
40CFR52B
40CFR53-59
40CFR60
40CFR60APPX
40CFR61-62
40CFR63A
40CFR63B
40CFR63C
40CFR64-71
40CFR72-80
40CFR81-85
40CFR86A
40CFR86B
40CFR190-259
40CFR260-265
40CFR266-299
Product Manuals
Training Manuals
800-882-3214 /919-557-7300
www.apexinst.com
ACCESSORIES
ISOKINETIC CALCULATORS & SPREADSHEET
M5A-1
Programs included:
M5A-C
M5A-1....English Units
M5A-1M....Metric Units
M5A-C
Functions
Calculates each stages aerodynamic cut point and DP250, needed to reduce particle size data.
Calculates and Stores ancillary data, such as dry gas composition and moisture content.
Reduces velocity traverse data.
Aids in selection of sample ow rates and ideal nozzle size.
Calculates ow rates and dwell times required for PM10 and PM2.5 sampling traverses.
Calculates fractional efciencies of control devices from samples obtained at inlets and outlets.
Description
PM-2.5-10C
ISOCYCLONE1.0
ISOCALC2.2
www.apexinst.com
800-882-3214 /919-557-7300
WINCIDRS
35d
ACCESSORIES
Accessories
Alumina....................................................... 19d
Balances ..................................................... 16d-17d
Bushings ..................................................... 20d-21d
Cam-Lock, Flanges, Port Adapters
& Packing Glands ....................................... 20d-21d
Couplings.................................................... 20d-21d
Components List, XC-522 / XC-572 ........... 10d
Dessicator & Dessicants............................. 18d
Drierite Dessicants ..................................... 19d
Drierite Dessicants ..................................... 20d
Dry Gas Meter Calibration Services ........... 22d
Dry Gas Meters .......................................... 27d
Electrical/Electronic Parts ........................... 28d
Equipment Cases ....................................... 32d
Filter Media ................................................. 11d-12d
Flange Reducers ........................................ 20d-21d
Flow Adapters ............................................. 25d-25d
Hardware .................................................... 30d
Hose, Air ..................................................... 27d
Hose, Polyspring ........................................ 27d
Inclinometers .............................................. 25d
Isokinetic Calculators & Spreadsheets ....... 34d
Manometers................................................ 23d
Manuals & Reference Materials ................. 34d
Meter Calibration Equipment & Services .... 23d
Meter Calibration Equipment & Services .... 23d
Monorails .................................................... 33d
Monorail Accessories.................................. 34d
Manometers................................................ 23d
Mercury, Spare Parts .................................. 3d-9d
Mercury, Console & Spare Parts ................ 3d-9d
36d
800-882-3214 /919-557-7300
www.apexinst.com
ISOKINETIC
MERCURY
FLOW PRESSURE
GAS ANALYSIS
ACCESSORIES
Distributed by:
EQUIPMENT
CATALOG
Publication: PEC-Catalog
Date Issued: 1-1-13
www.apexinst.com