Académique Documents
Professionnel Documents
Culture Documents
AS-1212 Manual
1. Key features
Color/ Mono JPG/PDF scan selection
1.
Item
Function
Description
File Format
SD card indicator
Battery indicator
Scan Color
COLOR/MONO
Counting Indicator
Scan resolution
2. Functional parts
JPG/PDF
2.
Empty battery
HI:900dpi(w/o docking)/1200dpi(w/docking)
MI:600dpi
LO:300dpi
Note:The scanner will power off automatically if no scanning action is detected within 3 minutes.
Part
Function
1) For scanner without docking: Press and hold this key for 3
seconds to turn power on or off. In power on mode, press this button
Color/Mono
Format button
LCD screen
Scan/Error LED
indicator
Charge LED
indicator
When the Red LED keeps on, it indicates the battery is charging
When the Red LED goes out,it indicates the battery has been fully
charged.
Low resolution
Middle resolution
7
DPI
Note:
1 Do not force the card into the slot; forcing may damage both the scanner and the micro
SD memory card. Align the micro SD card position (as marked) and try again
2. The micro SD memory card must be formatted before scanning. See the following
instructions.
High resolution
300dpi
600dpi
900dpi(w/o docking)
Press [TIME SET] button once to enter time setting mode by using a thin, blunt object,
such as the end of a paperclip to access the button. The LCD status display screen will
show 1 ## (step 1) for the year. ## is a set of number that would be changed to
correspond to the actual time/date setting. The numbers 1-5 in front of ## indicates each
step in the settings. Time2012.1.1~2050.12.31
2. Press the [JPG/PDF] or [DPI] button to select the current Year.
3. Press the
button once to confirm setting.
4. Repeat step 2 and 3 to continue the Time and Date setting process
1200dpi(w/ docking)
Indicator
1 ##
2 ##
3 ##
4 ##
5 ##
Setting
Year
Month
Date
Hour
Minute
JPG/PDF
USB interface
10
Time set
11
Reset
12
13
Fixed button
Slide to put the scanner on the docking or take it out of the docking
14
Width controller
1.
2.
3.
4.
5.
After setting the Minute, 5##, press the [TIME SET] button again to complete the Time
and Date setting.
Insert a new micro SD card into the scanner, and then turn on the scanner.
Press the format button into format mode. F will display on the LCD.
Press the
button once to format the micro SD card.
SD card indicator will blink until format is complete.
Notes:
1. Once fixed on the docking, the scanner is unable to scan black or transparent documents.
2. When the scanning document gets stuck or goes awry during the scanning process, press
Scan button to stop scanning, then take out the document and restart scanning.
3. When scanning with docking, if no paper is detected into the scanning slot within 4 or 5
seconds, just remove the scanning document, put it right in place and scan again.
4. When scanning relatively thick documents such as credit card or ID ,the narrow
side,rather than the wide side, is suggested to be inserted into the slot to guarantee
normal scanning.
NOTE: If the Removable Device Window did not launch automatically, go to your My
Computer and find the device under Removable Storage.
when connected(You
cannot find
removable disk)
7. Specifications
image sensor
Resolution
600x600 dpi
300x300 dpi
Function Description
Scan in progress.
Charge is over
Low power warning (the battery capacity is lower
than10%)
6. Connect to computer
You may also connect your scanner to your computer and view pictures on the computer monitor.
1. Without docking
Turn on your scanner by pressing the
button, connect your scanner to your computer to
enter into USB mode.USB symbol will display on status LCD. Click Open folder to view
files to view, import, copy, move or delete scanned files.
12.0Seconds(w/o docking)
Black Images/Black or
white vertical lines
SCAN/ERROR LED is on
after powered on
Black Image
1.
2. With the dry cleaning cloth provided, clean the scanning lens located on the bottom of the
3.
Scan width
216mm
300DPI:130"(max);
600DPI: 90"(max);
900DPI:70"(max)/1200DPI:50 (max)
4.
Scan length
File format
JPG/PDF
5.
LCD
3 Minutes
USB 2.0 high speed
External memory
Micro SD Card
7.
Standard Battery
700mAH Lithium-Polymer
8.
Press and hold the Color/Mono button. While holding the Color/Mono button, press the
button and then release both buttons to enter into auto-calibration mode. SD symbol
will flash and then stop.SCAN/ERROR LED will turn red.
Do not move the scanner .Wait until the SCAN/ERROR LED turns green.
When the SCAN/ERROR LED is green,start scanning the white paper by sliding the
scanner across the paper until the SCAN/ERROR LED light turns off.(Slide the scanner
backwards if necessary).
2.With docking:
Turn on your scanner by pressing the
button, connect your scanner to your
computer .Press the
button once to enter into USB mode. Your computer will
recognize the scanner as a Removable Disk,USB symbol will display on status LCD.
Click Open folder to view files to view, import, copy, move or delete scanned files.
Press the
button again to switch to scanning mode.
1200dpi(w/ docking)
Low resolution
900dpi(w/o docking)
Middle resolution
5 When the fixed button is oriented on the Release side, do not touch the release perch
inside the docking, since a big sound may produce from the pressing and it may hurt your
finger.
Blurry images
10. Charging
Operating System
1.
The scanner will keep charging when it is in connection with a computer via USB cable.
2.
CPU
Pentium or above
3.
The scanner will enter into charge mode if no extra scanning action is detected within 1
RAM
At least 256MB
Interface
USB port
SPECIAL NOTICE:
9. Troubleshooting
Problem
When scanning at 1200DPI, please use micro SD card at class 6 or above due to data flow is
Cause
Solution
Connection failure.
AM-SVP-N450-GB-2