Académique Documents
Professionnel Documents
Culture Documents
NOTE:
Solinst always recommends that our customers download
the data from their Leveloggers, using the same Levelogger
Software version they were originally programmed with.
Example: If a Levelogger Gold unit was programmed using Levelogger Software 3.4.1,
Solinst recommends first downloading the data from your Levelogger Gold using
Levelogger Software Version 3.4.1 and barometrically compensating the data in that
version first, before upgrading your Levelogger Gold and PC Software to the
latest version. After successfully retrieving the Levelogger data and
barometrically compensating the data (if desired), you can then proceed to
upgrade your Levelogger firmware and PC Software to the latest version.
PC Software
Firmware
Leveloader Gold
Firmware
SDI-12
Firmware
2.001
2.000
4.1
2.005
3.000
Note: Always use the latest Levelogger Software version to install the latest Firmware versions, unless otherwise stated.
Levelogger Accessories
Direct Read Cables, Optical Readers, Well Caps and other accessories are compatible with all versions of the Levelogger and Rainlogger Models.
For information on the complete list of accessories available, please visit www.solinst.com
Direct Read Cable Assembly
with Levelogger Edge
PC Interface Cable
(USB)
PC Interface Cable
(RS232)
Optical Reader
(USB)
Firmware
2.007
3001 Junior*
2.000
3002 Rainlogger
*Note: The Levelogger Junior, looks very similar to the new Levelogger Junior Edge. To determine the difference, look at the serial number on the body
of the Levelogger. If the fourth number in the serial number is 1, it is a Levelogger Junior. If the fourth number is a 2, it is a Levelogger Junior Edge.
To upgrade Levelogger Gold or Barologger Gold Firmware from 1.017 or higher, use the latest Firmware Upgrade Utility, which
comes with the latest Levelogger Software version.
To upgrade Levelogger Gold or Barologger Gold Firmware from 1.016 or lower, please contact Solinst.
If you are programming Leveloggers using Levelogger Series Software 3.4.1, you must use Leveloader Firmware 1.200.
Levelogger PC Software Version 3.4.1 is compatible with Windows 98, 2000, XP and Windows 7.
SDI-12 Cables sold after November 1, 2013 will be compatible with all Leveloggers and Rainlogger Models with latest firmware.
Printed in Canada
November 12, 2013
(Page 2 of 2)
Note: The previous version of the Levelogger LT (Mini-Silver) and the LTC (Black Zirconium Oxide) are still
compatible with all of the Solinst communication cables, except the SDI-12 Cable. These Leveloggers are
compatible only with Levelogger PC Software 3.1.1 with Windows 98, 2000 or XP,
and Leveloader Firmware 1.000.
Fax: +1 (905) 873-1992; (800) 516-9081 Tel: +1 (905) 873-2255; (800) 661-2023
35 Todd Road, Georgetown, Ontario Canada L7G 4R8
Web Site: www.solinst.com E-mail: instruments@solinst.com