Académique Documents
Professionnel Documents
Culture Documents
Sometimes one feels super HOPELESS without INTERNET GOOGLE SEARCHES and telephones which work.
OCEANEERING DOT COM is your answer to IMMEDIATELY shut down the well using Branko R. Babic CPP with pipe and shutoff method.
SEE ATTACHED JPEG.
Jet Swet idea would have super thick pipe, special beveled washers to allow compression inside pipe then ability to weld to
Inside of pipe and where you see the turning mechanism there would be attached a ball valve or valve and flange for hookup
To the surface to take all oil, gas and water away from ROV as it welds inside pipe securely.
SEE JPEG JET SWET LARGE FOR IDEAS ON MAKING ONE UP FOR CPP WITH PIPE AND VALVE !
TIME NOW PERHAPS 12 HOURS TOTAL as the ROV and SPECIAL UNDERWATER
WELDER to use same must be placed in the Gulf.
Now again we reference you to the Branko R. Babic CPP with pipe and shutoff valve
Attached hereto as this will indeed work with a simple ROV arm holding it in place to
Put inside the 21 inch thick wall pipe in sufficient large pipe thick size to allow welding
After tightening to the inside piping with spacial washers and compressing rubber
Annular components to grab the inside of the pipe until the welding could be
Completed then the special VALVE shut down sealing the riser pipe.
Should help with removal of riser pipe on the bottom with their help.
GO TO http://www.scribd.com/ralphwhitleysr to see the files quickly please.
5/20/2010
Page 2 of 4
Attachments Preview:
3 out of 6 attachment(s)
Kuwaiti Oil Fires Techniques for C_.jpg (Resized to 82%, Show actual size)
5/20/2010
Page 3 of 4
5/20/2010
Page 4 of 4
051510JetSwetLARGEIMAGE4095_big.jpg
5/20/2010