Académique Documents
Professionnel Documents
Culture Documents
CONTENTS
ODN Products Series
EasyODN ................................................................................................................. 1
ODF Product ............................................................................................................ 4
ODF2101-CH Series ........................................................................................................................... 5
ODF2101-FH Series ............................................................................................................................ 6
GPX147-B Series ................................................................................................................................ 7
ODF Module ...................................................................................................................................... 8
Accessories ............................................................................................................ 27
Fiber Adapter................................................................................................................................... 27
Pigtail .............................................................................................................................................. 28
Patch Cord ....................................................................................................................................... 29
EasyODN
cess point, and drop fiber. The feeder fiber starts from
terprises worldwide.
OLT
ONT
Indoor
FTTB
FTTC
Equipment room
inside a building
FTTH
Curb
Manhole
CO
Manhole
Manhole
Outdoor underground
Outdoor pole or
wall-mounting
Indoor
EasyODN
1. Best Economic
zz Project Consultancy
Huawei provides the consultant-assisted project consultancy service by comprehensively analyzing the feasibility of an ODN project based on the service demand, network buildout goal, as-is network and service
status, and investment budget of enterprises. This service dramatically mitigates the network build out risks
facing enterprises.
zz Network Planning
Huawei provides suggestions and estimated budgets on the optimal network planning scheme after analyzing the Enterprise Business Group demands of enterprises and relevant constraints, such as population
distribution, user distribution, service take-up, live network resources, civic planning, and civic roads and
pipes.
zz Comprehensive series of ODN products
Huawei provides a comprehensive series of ODN products for various networking scenarios, achieving optimal networking.
2. Fast Deployment
Based on rich engineering experience, Huawei concentrates efforts into engineering efficiency improvement by optimizing product design and engineering technologies to achieve fast Enterprise Business Group
deployment. For example, the air-blown micro cable with the industrys smallest gauge is used, maximizing
the pipe utilization. In addition, the user-friendly building-entry and house-entry products such as the industrys innovative fiber access terminal (FAT) are provided, facilitating the inside plant (ISP) engineering.
Furthermore, Huawei provides fast product customization or integration for meeting enterprises ODN construction requirements and accelerating service launching.
Huawei is an experienced optical access leader who has engaged in multiple optical network deployments
and turnkey projects. Leveraging its rich experience in the ODN, Huawei is highly competent to deliver
high-quality ODN projects desired by customers against the deadline.
EasyODN
for WDM1r.
Huawei is quickly and efficiently responsive to enterprises customization demands and network deploy-
ment issues.
ODF Product
Overview
The ODF (Optical-fiber Distribution Frame) is used for connection and patching of optical cables, mainly
used as the interface between optical transmission network and optical transmission equipment and between optical cables in access network of optical fiber subscribers.
Performance Indices:
Operating temperature: -10~+45
Storage temperature: -40~+65
Operating humidity: 85%(+30)
Air pressure:70 KPa~106 KPa
Insulation resistance between high-voltage protection ground and rack (cabinet) >1000M (DC 500V)
Dielectric withstanding voltage between high-voltage protection ground and rack (cabinet) DC 3000V for
1min without arcing and breakdown
Standard Compliance
Comply with IEC 61300-3-15, IEC 61300-3-16, IEC 61300-3-17, IEC 61300-3-23 etc international standards
and YD/T 778, GB/T 2423, GB/T 3873, GB/T 9286, GB/T 3047 etc China national standard
ODF Product
ODF2101-CH Series
Main Features:
Complete front operations
Applicable to large-capacity optical ber communication engineering
19 inch standard cabinet with termination unit and integrated splicing & termination unit, splicing unit and
splitter unit
Type
Dimensions (HWD) mm
Capacity
Weight Kg
ODF2101-CH1
936
109
ODF2101-CH2
720
101
ODF2101-CH3
648
91
ODF Product
ODF2101-FH Series
Main Features:
Rack without doors
Complete front operations
Applicable to large-capacity optical ber communication engineering
19 inch standard cabinet with termination unit and integrated splicing & termination unit, splicing unit and
splitter unit
Type
Dimensions (HWD) mm
Capacity
Weight Kg
ODF2101-FH1
936
64
ODF2101-FH2
720
56
ODF2101-FH3
648
46
ODF Product
GPX147-B Series
Main Features:
Indoor wall-mounted installation
Front operations, support jump-ber route
Standard 12-fiber splicing tray, flexible for capacity increasing
just by adding splicing tray
Support FC and SC type Adapters, adopting a convenient installation mode with a tilt of 35, avoid accidentally injure the
eyes
Separate function area and easy to operation and maintenance
Type
Dimensions (HWD) mm
Capacity
Weight Kg
GPX147-B1
40435089
12
5.2
GPX147-B2
40435089
24
5.5
GPX147-B3
526460145
48
21.5
GPX147-B4
606520145
72
28.5
ODF Product
GPX147-B Series
Integrated Splicing &
Termination Unit
Main Features:
19inch rack-mounted, suit ETSI standard mounted
Provide the splicing and termination functions
Compact structure, suit 300mm depth cabinet
Type
Dimension mm
Capacity
GPX147-GRP-72A
4U482266
72
GPX147-GRP-48A
3U482266
48
GPX147-GRP-24A
2U482266
24
GPX147-GRP-12A
1U482266
12
Main Features:
19 inch rack-mounted suit ETSI standard mounted
For the optical cable entry, grounding and mounting reliable
Type
Dimension mm
Weight kg
GYR-1
5U48282
3.3
Main Features:
19 inch rack-mounted, suit ETSI standard mounted
Use to store the redundant patch cords
Base
Type
Dimension mm
Weight kg
GPX147-FH-PQU
4U482107
3.3
Main Features:
The height can be adjust, and the step is 5mm
Type
Dimension mm
Weight
kg
Height
mm
GPX147-R-DZA
H756295
13
180~325
GPX147-R-DZB
H756295
16
330~615
FDT Product
Overview
The FDT (Fiber Distribution Terminal) is used for achieving connection and grooming of optical cable. It is
mainly suitable for optical cross-connecting point between optical transmission network, optical transmission equipment and access network for the fiber subscribers.
Performance Indices:
Operating temperature: -10~+45
Storage temperature: -40~+65
Operating humidity: 85%(+30)
Air pressure:70 KPa~106 KPa
Fireproof level: in conformity with the requirement for level UL 94 V0
Suitability for any adverse environment, Protection level: IP65
Dielectric withstanding voltage > DC 3000V, in 1min, without breakdown and arc
Insulation resistance R>2104M/ 500V DC
Mechanical strength: Each surface of the cabinet can bear a vertical pressure of more than 980N and the
edge of the door can bear a vertical pressure of over 200 N when the door is open. The mounting position
of the optical cable can bear an axial pull of 1000 N and three times of circular rotation by90in total
Standard Compliance
Comply with EN 60950-1, ETSI 300019-2-2, ETS 300019-2-4 AMD, GR 487 R3-198, IEC 60529, IEC
62134-1, UL94 etc international standards and YD/T 988, GB/T 2423, GB/T 3873, GB/T 9286, GB 4208 etc
China national standard
FDT Product
FDT2201D-576
Main Features:
Good heat isolation performance: SMC cabinet
Front and rear operation, occupy smaller space
Congured 19 standard optical splitter unit inside
Modular design, easy expansion
Type
Dimensions (HWD) mm
Capacity
Weight Kg
FDT2201D-576
576(SC)
190
10
FDT Product
FDT2101D-480
Main Features:
Modular design, easy expansion
Good heat isolation performance: SMC cabinet
Complete front operation, support to be installed near the wall
Separated operation area, easy maintenance
11
Type
Dimensions (HWD) mm
Capacity
Weight Kg
FDT2101D-480
480 (SC)
960 (LC)
147
FDT Product
FDT2102D-288
Main Features:
Congured 19 standard unit
Modular design, easy expansion
Good heat isolation performance: SMC cabinet
Complete Front operation, support to be installed near the wall
Type
Dimensions (HWD) mm
Capacity
Weight Kg
FDT2102D-288
288(SC)
100
12
FDT Product
FDT2103D series
Main Features:
Support grounding installation, wall-mounted installation, pole
mounted installation
With 8 grooves for splitter mounted, support modular splitter
Provide a parking area for the redundant bers management
The self-limited integrated splicing and termination tray and
self-limited splicing tray is installed in guide rail mode
Stainless steel make it anticorrosive
splitter
Parking area
Base
13
Type
Dimensions (HWD) mm
Capacity
Weight Kg
FDT2103D-144
600600300
144
28
FDT2103D-72
450600300
72
25
FAT Product
Overview
FAT (Fiber Access Terminal) is located at the user access point of Enterprise Business Group-ODN for connecting the optical distribution cables and drop cables, direct connection, branching and protection of optical fibers.
Performance indexes:
Operating temperature: -40~+65
Storage temperature: -25~+55
Operating humidity 95% (+40)
Air pressure:70 KPa~106 KPa
Standard Compliance
Comply with EN 60950-1, IEC 60529, IEC 62134-1, ITU.TL.51, Telcordia GR-1209-Core, Telcordia GR-1221Core, UL94 etc international standards and GB/T 2423, GB/T 3873, GB/T 9286, GB 4208 etc China national
standard
14
FAT Product
FAT3101/FAT3101D Series
Main Features:
Capacity: 6-ber, 12-ber, 18-ber
With straight through and branch function; Compatible for U
type cabling
Convenient for open repeat , easy to seal
Support wall-mounted and polemounted installation, satised
different application scenarios
Protection grade FAT3101 IP42FAT3101D IP65
Splicing tray
Install accessories
Waterproof block
15
Type
Dimensions (HWD) mm
Capacity
Weight Kg
FAT3101-6
29623870
2.6
FAT3101-12
29623870
12
2.6
FAT3101-18
29623870
18
2.6
FAT3101D-6
29623870
2.6
FAT3101D-12
29623870
12
2.6
FAT3101D-18
29623870
18
2.6
FAT Product
FAT3201&FAT3202 Series
Main Features:
Tiered structure design, Easy to operate and maintain without
interference
Supports straight-through and branching
Compatible with fusion splicing and mechanical splicing and
fast assembly connector, short the time to market
Double-layer structure provides enough space for operations
FAT3202 supports to install splitter
Protection grade: IP52
FAT3201
FAT3202
ISP Interface
Splicing Tray
Splitter
Type
Dimensions (HWD) mm
Capacity
Weight Kg
FAT3201-12
280320100
12
5.0
FAT3201-24
300320120
24
5.3
FAT3201-36
480320125
36
8.2
FAT3201-48
480320125
48
8.2
FAT3202-12
280320100
12
5.0
FAT3202-24
300320120
24
5.3
FAT3202-36
480320125
36
8.0
FAT3202-48
480320125
48
8.0
16
FAT Product
FAT3203D Series
Main Features:
Tiered structure design, Easy to operate and maintain without
interference
Supports the entry of at drop cable (2mm x 3mm) and round
drop cable (5 mm ~ 7 mm)
Support fusion splicing, mechanical splicing and eld assemble
(FA) connector, short the time to market
Capacity: 6-ber, 12-ber, 18-ber, satises different application
scenarios
Outdoor installation. Protection grade: IP55
FAT3203D-12
Splitter
Splicing tray
FAT3203D-12/18
17
Install accessories
Type
Dimensions (HWD) mm
Capacity
Weight Kg
FAT3203D-6
29623870
3.6
FAT3203D-12
386322120
12
9.3
FAT3203D-18
386322120
18
9.3
FAT Product
FAT3204D Series
Main Features:
Compatible for splicing, termination and splitting function
Easy to operate and maintain without interference
Separated splitting and splicing area, easy to install the
splitter
Supports the entry of at drop cable (2mm x 3mm) and
round drop cable (5 mm ~ 7 mm)
Support fusion splicing, mechanical splicing and eld assemble (FA) connector, short the time to market
Outdoor installation. Protection grade: IP55
Compatible for direct connection, branching and splitting
Compatible for wall-mounted and pole-mounted
Install accessories
Splicing tray
Splitter
Type
Dimensions (HWD) mm
Capacity
Weight Kg
FAT3204D
36
10
18
Splitter Products
Overview
Splitter, which is a branched of passive fiber, is a passive equipment to connect optical line terminal and
optical network unit, its function is to distribute down-link data and integrate up-link data.
Performance indexes:
Operation temperature: -40 to +85
Storage temperature: -40 to +85
Operation humidity: 93% (+30)
Atmospheric pressure: 70 kPa to 106 kPa
Standard Compliance
Comply with EN 60950-1, ETSI 300019-2-2, ETS 300019-2-4 AMD, GR 487 R3-198, IEC 60529, IEC
62134-1, UL94 etc international standards and YD/T 988, GB/T 2423, GB/T 3873, GB/T 9286, GB 4208 etc
China national standard
Technical Parameters
Splitting
Ratio
Insertion
Loss dB
Uniformity
dB
PDL dB
1:2 FBT
3.6
0.6
0.15
1:4 PLC
7.3
0.7
0.2
1:8 PLC
10.4
1.0
0.25
1:16 PLC
13.6
1.3
0.3
1:32 PLC
16.8
1.5
0.3
1:64 PLC
20.3
1.9
0.3
2:2 FBT
3.6
0.7
0.15
2:4 PLC
7.6
1.0
0.3
2:8 PLC
10.8
1.2
0.3
2:16 PLC
14.3
1.5
0.3
2:32 PLC
17.4
1.8
0.3
2:64 PLC
20.6
2.0
0.4
WDL dB
TDL dB
Return
Loss dB
0.3
50(PC)
55(APC)
0.5
0.5
Directivity
Loss dB
Optical
Power
mW
5.2
500
55
500
300
Remark: The insertion loss of splitter is under normal temperature and the loss of connector is not included.
19
Splitter Products
SPL1202 Series
Main Features:
Standard 19 inch rack-mount structure, compatible with
ETSI installation
Large capacity, High density, 8 2:2-splitter can install in an
1U cell
Guide rail and tray structure, convenient for maintenance
Space lever in guide rail to prevent the tray dropping off
Operation area
Splitting area
Splitter
Type
Dimensions (HWD) mm
Split ratio
SPL1202-1U
1U483260
SPL1202-2U
2U483260
1:64
20
Splitter Products
SPL1101 Series
Main Features:
The uniform split ratio ranges from 12 to 164
The optical power distribution of non-uniform splitters includes 5/95, 10/90, and 30/70
This optical splitter module contains 3m pigtail, which is convenient for connections
Support salver-installation and box-installation
21
Type
Dimensions (HWD) mm
Split ratio
SPL1101-2-F1002
1208018
1:2-FBT
SPL1101-2-F1002A
1208018
1:2-FBT-5/95
SPL1101-2-F1002B
1208018
1:2-FBT-10/90
SPL1101-2-F1002C
1208018
1:2-FBT-30/70
SPL1101-4-P1004
1208018
1:4-PLC
SPL1101-8-P1008
1208018
1:8-PLC
SPL1101-16-P1016
1208018
1:16-PLC
SPL1101-32-P1032
1208018
1:32-PLC
SPL1101-64-P1064
14011418
1:64-PLC
Splitter Products
SPL9101 Series
Main Features:
As a separated splitter, it can be installed in the FDT, closure, FAT etc for splitting
Small size with large capacity meets the exible requirement of network construction
Modular design and same size for different split radio
With different color pigtails as inletsgreen and outlets (yellow) of splitter easy to division
Easy operation and maintenance without tools
Supply different adapter such as SC/APC, SC/UPC, FC/
UPC, LC/APC and LC/UPC
Type
Dimensions (HWD) mm
Split ratio
SPL9101-2-F1002
1106010
1:2 FBT
SPL9101-4-P1004
1106010
1:4 PLC
SPL9101-8-P1008
1106010
1:8 PLC
SPL9101-16-P1016
1106010
1:16 PLC
SPL9101-32-P1032
1106020
1:32 PLC
SPL9101-64-P1064
1106020
1:64 PLC
SPL9101-2-F2002
1106010
2:2 FBT
SPL9101-4-P2004
1106010
2:4 PLC
SPL9101-8-P2008
1106010
2:8 PLC
SPL9101-16-P2016
1106010
2:16 PLC
SPL9101-32-P2032
1106020
2:32 PLC
SPL9101-64-P2064
1106020
2:64 PLC
22
Splitter Products
SPL9102/9103 Series
Main Features:
Small size with large capacity meets the close application scenario
SPL9102 used in splicing tray without connecter
SPL9103 have pigtails with SC/APC, SC/UPC, FC/UPC, LC/APC or LC/UPC connecters
SPL9102
23
SPL 9103
Type
Dimensions (HWD) mm
Split ratio
SPL9102-2-F1002
355
1:2-FBT
SPL9102-4-P1004
4445
1:4-PLC
SPL9102-8-P1008
4445
1:8-PLC
SPL9102-16-P1016
4945
1:16-PLC
SPL9102-32-P1032
4945
1:32-PLC
SPL9102-64-P1064
41265
1:64-PLC
SPL9102-2-F2002
355
2:2-FBT
SPL9102-4-P2004
4450
2:4-PLC
SPL9102-8-P2008
4450
2:8-PLC
SPL9102-16-P2016
4965
2:16-PLC
SPL9102-32-P2032
4965
2:32-PLC
SPL9103-2-F1002
355
1:2-FBT
SPL9103-4-P1004
4445
1:4-PLC
SPL9103-8-P1008
4445
1:8-PLC
SPL9103-16-P1016
4945
1:16-PLC
SPL9103-32-P1032
4945
1:32-PLC
SPL9103-64-P1064
41265
1:64-PLC
SPL9103-2-F2002
355
2:2-FBT
SPL9103-4-P2004
4450
2:4-PLC
SPL9103-8-P2008
4450
2:8-PLC
SPL9103-16-P2016
4965
2:16-PLC
SPL9103-32-P2032
4965
2:32-PLC
Splitter Products
Type
Dimensions (HWD) mm
Split ratio
FLQ4-P-GRP/SC
380x300x90
2:4 FBT
FLQ8-P-GRP/SC
380x300x90
1:8 PLC
FLQ16-P-GRP/SC
425325110
1:16 PLC
FLQ32-P-GRP/SC
425325110
2:32 PLC
24
Closure Products
Overview
Closure is mainly used for connecting and branching in the optical fiber network; it is suitable for protecting of all kinds of optical fiber straight-through and branching.
Performance indexes:
Protection level: IP68
Operation temperature: -10~+60
Storage temperature: -40to +70
Operation humidity: 95% (+30)
Atmospheric pressure: 70 kPa to 106 kPa
Normal temperature seal performance: Inside atmospheric pressure 40KPa,no bubbles indicating leakages
is observed for 15 minutes below the water surface
Temperature cyclic variation: After 20 cycles of the Temperature cyclic variation from -40 to +65, the
appearance is not changed
Static load1000N/25cm2
Cable bending: The spot between the closure and seal tting can bear bending tension at bending angle of
30 for 5 circles
Standard Compliance
Comply with GR-487, IEC 60529, IEC 61300-2-30, ITU-T L.13:2003, UL 94 etc international standards and
YD/T814.1 etc China national standard
25
Closure Products
Install accessories
Splicing Tray
Dimensions (LD) mm
Capacity
Weight Kg
SSC2111-48
428190
48 splicing
SSC2111-96
428190
96 splicing
SSC2112-96
498235
96 splicing
SSC2112-144
498235
144 splicing
SSC2112T-16
498235
16 termination
SSC2113168
498262
168 splicing
11
SSC2113T-24
498262
24 termination
11
26
Accessories
Fiber Adapter
Main Features:
Low insertion loss; high intensity; counter-connection with high precision
Zirconia ceramic mating-sleeve of split type
Realizing core alignment with high precision
Good interchangeability
Good repeatability
Stable environment performance
Comply with IEC 60874-14-3 and GR326 standard
Performance indexes:
Adapter loss (insertion, interchange, repetition)0.3dB
27
SC/UPC
SC/APC
2SC/UPC
FC/UPC
LC/UPC
2LC/APC
2LC/UPC
FC-SC
Accessories
Pigtail
Main Features:
Good hardiness
Good conversion performance
High temperature stability
Mate/demate cycles:500 without any degradation of the transmission quality
Performance indexes:
Completely comply with IEC 61754-13(FC connector)
Completely comply with IEC 61754-4 (SC connector)
Completely comply with IEC 61754-20 (LC connector)
the insertion loss is less than 0.3dB
Return loss of single-mode ber: SC/PC45dB, SC/UPC55dB, and SC/APC60dB
SC Pigtail
FC Pigtail
LC Pigtail
28
Accessories
Patch Cord
Main Features:
Both ends of pigtail are jumper
Good hardiness
Good conversion performance
High temperature stability
Mate/demate cycles:500 without any degradation of the transmission quality
Performance indexes:
Completely comply with IEC 61754-13(FC connector)
Completely comply with IEC 61754-4 (SC connector)
Completely comply with IEC 61754-20 (LC connector)
The insertion loss is less than 0.3dB
Return loss of single-mode ber: SC/PC45dB, SC/UPC55dB, and SC/APC60dB
29
Overview
Cable Product:
Application
Duct
GYFTY63GYFTY73GYFTY83
GCYFTY
ADSS
Indoor drop
GJPFJHGJBFJH
Cable Product:
Value
Attribute
Attenuation of
uncabled ber
(dB/km)
Chromatic
dispersion
(ps/nm.km)
Coating Diameter
(um)
G.652D
G.657A1
1310nm
0.36
0.36
1383nm
0.35
0.35
1550nm
0.22
0.22
1625nm
0.24
0.24
1288-1339nm
3.5
3.5
1271-1360nm
5.3
5.3
1550nm
18
18
1625nm
22
22
before colored
24510
24510
colored
25015
25015
9.20.4
8.6~9.50.4
125.01
125.00.7
0.6
0.5
1.0
1.0
1260
1260
1300-1324
1300-1324
0.092
0.092
0.10
0.10
0.20
0.20
4.0
4.0
Uncabled ber
macrobending loss
(dB)
Radius (mm)
30
16
15
10
Turns
100
10
1550nm
0.1
0.05
0.25
0.75
1625nm
0.1
0.05
1.0
1.5
30
Construction
Capacity
Feature
GYTA
GYFTA
Outer sheath
APL
Loose tube
Optical fiber
Tube filling compounds
Central strength member
Cable filling compounds
Filler
8~144
GYTS
Outer sheath
PE-steel-PE(PSP)
Loose tube
Optical fiber
Tube filling compounds
Central strength member
Cable filling compounds
Filler
8~144
8~144
12-144
6-48
Outer sheath
Loose tube
Optical fiber
GYFTY
GYDGA
Outer sheath
Aluminum laminated tapc
Water blocking tapc
Ribbon identification
Central strength member
Slotted core
Ribbon fiber 6c ribbon
Ripcord
Water blocking yarn
Outer sheath
Loose tube
Optical fiber
GCYFTY
31
Construction
Capacity
Feature
8~144
8~144
8~144
8~144
Loose tube
GYTC8S
Optical fiber
Tube filling compounds
Central strength member
Cable filling compounds
Filler
GYTC8A
GYFTC8A
Loose tube
Optical fiber
Tube filling compounds
Central strength member
Cable filling compounds
Filler
GYFTC8Y
Optical fiber
Tube filling compounds
Central strength member
Cable filling compounds
Filler
ADSS
Outer sheath
Aramid yarn
Inner sheath
Loose tube
Optical fiber
Tube filling compounds
Central strength member
Cable filling compounds
Filler
32
33
Construction
GYFTY53
Outer sheath
PE-steel-PE(PSP)
Inner sheath
Loose tube
Optical fiber
Tube filling compounds
Central strength member
Cable filling compounds
Filler
GYTY53
Outer sheath
PE-steel-PE(PSP)
Inner sheath
Loose tube
Optical fiber
Tube filling compounds
Central strength member
Cable filling compounds
Filler
GYTA53
GYFTA53
Outer sheath
PE-steel-PE(PSP)
Inner sheath
APL
Loose tube
Optical fiber
Tube filling compounds
Central strength member
Cable filling compounds
Filler
GYFTY63
Outer sheath
Aramid yarn
Inner sheath
Loose tube
Optical fiber
Tube filling compounds
Central strength member
Cable filling compounds
Filler
GYFTY73
Outer sheath
Glass yarn
Inner sheath
Loose tube
Optical fiber
Tube filling compounds
Central strength member
Cable filling compounds
Filler
GYFTY83
Outer sheath
Glass yarn
Inner sheath
Loose tube
Optical fiber
Tube filling compounds
Central strength member
Cable filling compounds
Filler
Capacity
Feature
8~144
8~144
8~144
8~144
8~144
8~144
Type
Construction
Capacity
Feature
36~72
4~24
1~2
1~2
1~2
2~12
LSZH
Tight buffer fiber
Central strength member
GJPFJH
LSZH
Wrap tapc
Subunit
Central strength member
GJBFJH
GJXFH
FRP
Optical fiber
LSZH jacket
H
GJXH
H
Steel wire
Optical fiber
LSZH jacket
H
GJXFCH
LSZH jacket
Steel wire
Optical fiber
LSZH
Aramid yarn
Loose tube
GYXTZY
Optical fiber
Tube filling compounds
Ripcord
34
Other trademarks, product, service and company names mentioned are the property of their respective owners.
General Disclaimer
THE INFORMATION IN THIS DOCUMENT MAY CONTAIN PREDICTIVE STATEMENTS
INCLUDING, WITHOUT LIMITATION, STATEMENTS REGARDING THE FUTURE FINANCIAL
AND OPERATING RESULTS, FUTURE PRODUCT PORTFOLIO, NEW TECHNOLOGY, ETC.
THERE ARE A NUMBER OF FACTORS THAT COULD CAUSE ACTUAL RESULTS AND
DEVELOPMENTS TO DIFFER MATERIALLY FROM THOSE EXPRESSED OR IMPLIED IN THE
PREDICTIVE STATEMENTS. THEREFORE, SUCH INFORMATION IS PROVIDED FOR REFERENCE
www.huawei.com