Académique Documents
Professionnel Documents
Culture Documents
Design an IP addressing scheme to provide connectivity to end users in a small to mediumsized business network
Device Interface
IPv4 Address
Subnet Mask
Default Gateway
IPv6 Address/Prefix
S0/0/0
128.107.0.254
255.255.255.252
N/A
S0/0/1
2001:DB8:2:1::0/127
N/A
S0/1/0
2001:DB8:1:1::6/127
N/A
S0/1/1
10.10.20.1
N/A
R1
255.255.255.252
G0/0
R2
G0/1
S0/0/0
G0/0
R3
N/A
N/A
10.10.20.2
255.255.255.252
N/A
2001:DB8:1:A::1/64
N/A
G0/1
2001:DB8:1:B::1/64
N/A
S0/0/0
2001:DB8:1:1::7/127
N/A
PC1
NIC
PC2
NIC
PC3
NIC
2001:DB8:1:A::F/64
2001:DB8:1:A::1
PC4
NIC
2001:DB8:1:B::F/64
2001:DB8:1:B::1
Scenario
The network administrator has asked you to implement IPv4 and IPv6 static and default routing in
the test environment shown in the topology. Configure each static and default route as directly
attached.
Requirements
1. Use the address space 10.10.16.0/24 to design an addressing scheme.
Split this address space into two equal-sized networks by subnetting it again.
Subnet 1: 10.10.16.0/25
Subnet 2: 10.10.16.128/25
subnet: 10.10.16.128
mask: 255.255.255.128
For each subnet, assign the first usable IP address to R2 and the last usable IP address to
the PCs.
interface G0/0 ip address 10.10.16.1 255.255.255.128 no shutdown
PC1: 10.10.16.126 255.255.255.128
Gateway: 10.10.16.1 255.255.255.128
interface G0/1
ip address 10.10.16.129 255.255.255.128
no shutdown
PC2: 10.10.16.254 255.255.255.128
Gateway: 10.10.16.129 255.255.255.128
2. Configure IPv4 summary and default routes.
Configure an IPv4 default route on R1 using Serial 0/0/0 as the exit interface.
ip route 0.0.0.0 0.0.0.0 s0/0/0
Configure an IPv4 summary route on R1 for the internal LANs. Use the exit interface.
ip route 10.10.16.0 255.255.255.0 s0/1/1
3. Configure IPv6 summary and default routes.
Configure an IPv6 default route on R1 using Serial 0/0/1 as the exit interface.
ipv6 route ::/0 s0/0/1
Configure an IPv6 summary route on R1 for the internal LANs. Use the exit interface.
ipv6 route 2001:db8:1:a::/63 s0/1/0
4. Configure an IPv4 floating static route on R1 to the 64.100.100.0/24 network using the
Serial 0/0/1 as the exit interface. Make the floating static route less trustworthy than the
default route by one unit of AD.