Académique Documents
Professionnel Documents
Culture Documents
INTRODUCTION
CONTENTS
Application Callouts
Centrifuge Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Application Categories
Threadlocking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Thread Sealing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Gasketing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Retaining. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
General Bonding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Potting and Encapsulating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Wear Coatings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Grouting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Anti-Seize Lubricants. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Cleaning, Metal Pretreatment and Functional Coatings . . . . . . . . . . . 30
Dispensing Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Henkel Application Proposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
2
5
4
7
10
11
5
7
1
9
8
12
10
FLUID PUMPING (MUD, FRAC & CENTRIFUGAL PUMPS, MUD SYSTEMS, PACKAGES, ETC.)
Pages
POWER GENERATION (ELECTRIC MOTORS, GENSETS, TURBINES, HYDRAULIC POWER UNITS, ETC.)
Application
Solution
Pages
Skid mounting
26-27
Vibrational loosening
LOCTITE Threadlockers
12-13
Hydraulic fittings
14-15
Paint preparation
30-31
ID plates
20-21
Application
Solution
Pages
Centrifuge assembly
10-11
8-9
Solution
Pages
8-9
Vibrational loosening
LOCTITE Threadlockers
20-21
Paint preparation
30-31
Application
Solution
Pages
Flange assemblies
26-27
Pneumatic fittings
14-15
Application
Solution
Pages
Vibrational loosening
LOCTITE Threadlockers
12-13
Hydraulic fittings
14-15
Paint preparation
30-31
12-13
8-9
Solution
Pages
22-23
18-19
Vibrational loosening
LOCTITE Threadlockers
12-13
20-21
Solution
Pages
14-15
Skid mounting
26-17
Vibrational loosening
LOCTITE Threadlockers
12-13
ID plates
20-21
Paint preparation
30-31
Solution
Pages
Hydraulic fittings
14-15
Skid mounting
26-27
Paint preparation
30-31
ID plates
20-21
Application
Solution
Pump assembly
Skid mounting
26-27
Application
Solution
Pages
Hydraulic fittings
14-15
Hydraulic fittings
14-15
Vibrational loosening
LOCTITE Threadlockers
12-13
Flange assemblies
26-27
ID plates
20-21
Vibrational loosening
LOCTITE Threadlockers
12-13
Paint preparation
30-31
Paint preparation
30-31
4-5
11
12
TOP DRIVES
Application
Solution
Application
Solution
6-7
6-7
8-9
8-9
Vibrational loosening
LOCTITE Threadlockers
12-13
Pump assembly
4-5
ID plates
20-21
22-23
Paint preparation
30-31
Paint preparation
30-31
Pages
SPECIALTY VEHICLES (FRAC, BLENDER, CEMENTING & THUMPER TRUCKS, PORTABLE RIGS, ETC.)
Pages
PUMP APPLICATIONS
LOCTITE GASKETING
Volute to Pump Housing
Bearing Frame to Frame Adapter
LOCTITE ANTI-SEIZE
Power End Bolts
Impeller to Shaft
Gland Assembly Nuts
LOCTITE THREADLOCKERS
Casing
Volutes
Impeller Fans
Mounting Bolts
Casing Bolts
LOCTITE METAL
PRETREATMENT
Pump Housing
LOCTITE GROUTING
Mounting and Leveling Base
LOCTITE BONDING
Identification Plate
GEARBOX APPLICATIONS
LOCTITE METAL PRETREATMENT
Gearbox Housing
LOCTITE RETAINING
COMPOUND
Bearing to Housing
Gear Wheels to Shaft
LOCTITE GASKETING
Split Gearbox Housing
Inspection Cover and Housing
LOCTITE GROUTING
Skid Mounting and Leveling
LOCTITE THREADLOCKING
Cover Plate to Housing Bolts
Mounting Bolts
LOCTITE ANTI-SEIZE
Dowel Pins
LOCTITE THREADLOCKING
Through Bolts
Assembly Screws
LOCTITE GASKETING
End Plate to Housing
Cover to Junction Box
LOCTITE POTTING
ANDENCAPSULATING
Junction Box
Encapsulate Stator
LOCTITE RETAINING
COMPOUND
Bearing to Shaft
Rotor to Shaft
LOCTITE GROUTING
Base Plate to Skid
CENTRIFUGE APPLICATIONS
CENTRIFUGE DRIVE/
V-BELT GUARD
BOWL
HOUSING
BASE FRAME
CONVEYOR
BOWL
Outside bowl surface LOCTITE Chemical Coating
Bowl bearing LOCTITE Retaining Compound
Bowl flange LOCTITE Gasketing
Inside bowl to artificial turf LOCTITE
BondingAdhesive
Bowl fasteners LOCTITE Threadlocking
CONVEYOR
Conveyor surface LOCTITE Wear Coating
Wear cylinder to feed zone exit port LOCTITE
BondingAdhesive
Flight tips to conveyor LOCTITE Bonding Adhesive
Conveyor bearings LOCTITE Retaining Compound
HOUSING
Interior lower housing walls LOCTITE Wear Coating
Upper and Lower housing flange LOCTITE Gasketing
Inspection covers LOCTITE Gasketing
Housing fasteners LOCTITE Threadlocking
BASE FRAME
Bearing ring to bearing block LOCTITE Retaining Compound
Bearing block and motor plate fasteners LOCTITE Threadlocking
Alignment pin LOCTITE Anti-Seize
Paint preparation LOCTITE Metal Pretreatment
THREADLOCKING
Locking of Threaded Fasteners
No
No
What temperature resistance do you need?
360F
Solution
Helpful Hints:
Use LOCTITE 7649 Primer for faster fixture
times and on inactive metals
INACTIVE METALS
Plated Parts
Anodized Aluminum
Titanium
Stainless Steel
Galvanized Steel
Zinc
Aluminum
Black Oxide
650F
Wicking Grade
High Lubricity
Medium Strength/Primerless
High Strength/Primerless
Medium Strength
Medium Strength
LOCTITE 290
Threadlocker
LOCTITE 2047
Threadlocker
LOCTITE 243
Threadlocker
LOCTITE 263
Threadlocker
LOCTITE 246
Threadlocker
LOCTITE 2422
Threadlocker
Color
Green
Black
Blue
Red
Blue
Blue
Viscosity (cP)
25/55
2,000/12,000
1,300/3,000
400/600
2,600
Paste
20 min./24 hrs
90 min./24 hrs.
10 min./24 hrs.
10 min./24 hrs.
5 min./24 hrs.
30 min./24 hrs.
90/260
375/80
230/40
290/290
170/48
102/12
-65F to 300F
-65F to 300F
-65F to 360F
-65F to 360F
-65F to 450F
-65F to 650F
Fixture/Cure Time
Breakaway/Prevail Torque (in.-lb.)
Temperature Resistance
450F
Package Sizes
l Highly Recommended
75% or greater
Recommended
25% to 75%
Not Recommended
29031 50 ml bottle
29041 250 ml bottle
1134607 50 ml bottle
1329467 50 ml bottle
1329505 250 ml bottle
1330585 50 ml bottle
1330335 250 ml bottle
29514 50 ml bottle
29515 250 ml bottle
1134601 30 g syringe
1134602 300 g cartridge
LOCTITE 290
Threadlocker
Recommended for locking
pre-assembled fasteners.
Mil Spec (S-46163A)
Type III, Grade R. NSF/
ANSI 61 Certified.
LOCTITE 2047
Threadlocker
This product is specially
formulated with lubricant
additives to aid in the
assembly of large
nuts and bolts.
LOCTITE 243
Threadlocker
General-purpose
removeable-strength liquid
threadlocker. Reliably
seals, locks and protects
metal fasteners up to ".
NSF/ANSI 61 Certified.
CFIA Approved.
LOCTITE 263
Threadlocker
General-purpose
permanent strength liquid
threadlocker. Reliably
seals, locks and protects
metal fasteners up to 1".
CFIA Approved.
LOCTITE 246
Threadlocker
Removeable-strength, liquid
threadlocker for high temp.
applications (i.e. 450F).
(Note: Also available
in High-strength Red,
LOCTITE 272).
LOCTITE 2422
Threadlocker
Removeable-strength
liquid threadlocker
for ultra-high-temp.
applications (i.e. 650F).
(Note: Also available
in High-strength Red,
LOCTITE 2620).
THREAD
SEALING
Sealing of Threaded Components
Yes (non-fouling)
Liquid Paste
Semisolid Stick
1/2" or greater
3/8" or less
530F
General-purpose
Anti-Galling
on Stainless
High Temperature
High Viscosity
Low Viscosity
LOCTITE 561
Thread Sealant
LOCTITE 567
Thread Sealant
LOCTITE 5770
Thread Sealant
LOCTITE 5452
Thread Sealant
LOCTITE 545
Thread Sealant
White
White
Off-White
Purple
Purple
Semisolid
540,000
60,000
30,000
14,000
5 min./24 hrs.
6 hrs./72 hrs.
20 min./72 hrs.
5 min./24 hrs.
4 hrs./24 hrs.
10,000 (hydraulic)
10,000 (hydraulic)
10,000 (hydraulic)
10,000 (hydraulic)
10,000 (hydraulic)
Temperature Resistance
-65F to 300F
-65F to 400F
-65F to 530F
-65F to 300F
-65F to 300F
Helpful Hints:
Use LOCTITE 7649 Primer for faster fixture
times and on inactive metals
Color
INACTIVE METALS
Plated Parts
Anodized Aluminum
Titanium
Stainless Steel
Viscosity (cP)
Galvanized Steel
Zinc
Aluminum
Black Oxide
Fixture/Cure Time
Internal
Leak Path
Solution
Package Sizes
l Highly Recommended
75% or greater
Recommended
25% to 75%
Not Recommended
37127 19 g stick
56747 50 ml tube
56765 250 ml tube
1138284 50 ml tube
1138281 250 ml tube
1265769 50 ml tube
1265770 250 ml tube
54531 50 ml bottle
54541 250 ml bottle
LOCTITE 561
Thread Sealant
Semisolid thread sealant
stick convenient for
overhead applications
and on-the-go usage.
NSF/ANSI 61 Certified.
LOCTITE 567
Thread Sealant
General-purpose thread
sealant specially formulated
with anti-galling properties
for stainless steel substrates.
ABS Approved.
LOCTITE 5770
Thread Sealant
General-purpose thread
sealant for use in hightemperature applications.
(i.e. up to 530F)
LOCTITE 5452
Thread Sealant
Non-fouling thread sealant
formulated for use on larger
(i.e. > 1/2") fine-threaded
fittings as used in hydraulic
and pneumatic installations.
LOCTITE 545
Thread Sealant
Non-fouling thread sealant
formulated for use on smaller
(i.e. < 1/2") fine-threaded
fittings as used in hydraulic
and pneumatic installations.
ABS Approved.
CFIA Listed.
GASKETING
Sealing of Flanges
Helpful Hints:
For frequently
serviced parts,
consider using
a cure-in-place
light cure silicone
gasketing product
like LOCTITE 5039.
Even machined
flanges have surface irregularities which can
create leak paths
Solution
Color
Viscosity (cP)
Shear Strength (psi)
300F
400F
450F
500F
700F
Flexible
Slow Cure
High Temperature
Rapid Cure
Oil Tolerant
High Temperature
LOCTITE 5188
LOCTITE 518
FlangeSealant
LOCTITE 510
LOCTITE 5600
LOCTITE 5900
LOCTITE 5920
Red
Red
Red
Black
Black
Copper
20,000
2,275,000
350,000
65,000
35 g/min.
275 g/min.
290
1,100
725
360
180
95
-65F to 300F
-65F to 300F
-65F to 400F
-65F to 450F
-65F to 500F
-65F to 700F
24 hrs.
4 hrs.
4 hrs.
5 min.
20 min.
1 hr.
51831 50 ml tube
51845 300 ml cartridge
Temperature Resistance
Functional Cure Time
Package Sizes
l Highly Recommended
75% or greater
Recommended
25% to 75%
Not Recommended
LOCTITE 5188
Flexible, general-purpose,
form-in-place anaerobic
flange sealant designed for
use on metal substrates
(especially aluminum).
LOCTITE 518
FlangeSealant
Rigid, general-purpose,
form-in-place anaerobic
flange sealant for use on rigid
metal flanges, where fast
cure time (4 hrs.) is needed.
NSF/ANSI 61 Certified.
CFIA Approved.
LOCTITE 510
Rigid, general-purpose, formin-place anaerobic flange
sealant formulated for use in
high temp. (i.e. 400F) rigid
metal-gasketing applications.
LOCTITE 5600
Flexible, fast cure (i.e.
5min.), form/cure-inplace 2k silicone for use in
gasketing applications with
flexible parts or large gap
tolerance. (Also available
in slower cure times).
LOCTITE 5900
Flexible, general-purpose,
cure-in-place, moisture
cure, oxime silicone for use
in gasketing applications
with flexible parts or
large gap tolerance.
CFIA Approved.
LOCTITE 5920
Flexible, cure-in-place,
moisture-cure, oxime
silicone for use in high
temp. (i.e. 700F)
gasketing applications.
RETAINING
Securing Cylindrical Assemblies
Galvanized Steel
Zinc
Aluminum
Black Oxide
300F
400F
General Purpose/
Stainless Steel
Slip Fit/
High Strength
Slip Fit/
High Temperature
LOCTITE 648
LOCTITE 638
LOCTITE 620
LOCTITE 232
LOCTITE 640
Color
Green
Green
Green
Brown
Green
3,900
4,500
3,800
1,320
3,190
500
2,500
8,500
5,000
600
Clearance
450F
Viscosity (cP)
Yes
355F
Solution
Helpful Hints:
No
Temperature Resistance
-65F to 355F
-65F to 355F
-65F to 450F
-65F to 300F
-65F to 400F
Fixture/Cure Time
3 min./24 hrs.
4 min./24 hrs.
60 min./24 hrs.
60 min./24 hrs.
60 min./24 hrs.
l Highly Recommended
75% or greater
Recommended
25% to 75%
Not Recommended
1835920 50 ml bottle
1835918 250 ml bottle
1835936 50 ml bottle
1835925 250 ml bottle
62040 50 ml bottle
62070 250 ml bottle
135520 50 ml bottle
135521 250 ml bottle
LOCTITE 648
General-purpose, highstrength, retaining compound
for bonding cylindrical metal
parts (especialy stainless
steel) with a clearance
or interference fit.
NSF/ANSI 61-Certified
LOCTITE 638
General-purpose, highstrength, retaining compound
for bonding cylindrical metal
parts with slip fits or larger
gaps (i.e. up to 0.01").
NSF P1 Certified
LOCTITE 620
High-strength retaining
compound for bonding
cylindrical metal parts
in high temp. (i.e.
450F) applications.
ABS Approved.
LOCTITE 232
Slow-curing, low-strength
retaining compound for bonding
very large and/or heavy
interference-fitting metal parts.
CFIA Approved.
LOCTITE 640
Slow-cure, high-strength
retaining compound for bonding
very large and/or heavy
interference-fitting metal parts
(especially brass) in high temp.
(i.e. 400F) applications.
GENERAL
BONDING
Joining Substrates
Rapid Fixture
Structural Strength
Toughened/
General-purpose
Rapid Fixture/
High Temperature
Composite
Bonding
Lightly Contaminated
Metal Bonding
High Impact
MetalBonding
Hot Strength
LOCTITE 435
Instant Adhesive
LOCTITE 334/7387
LOCTITE 9460
LOCTITE H8000
LOCTITE E-30UT
LOCTITE E-214HP
Cyanoacrylate
Acrylic
Epoxy
Methyl Methacrylate
Epoxy
Epoxy
Clear
Yellow
Grey
Green
Purple
Grey
175
85,000
200,000
190,000
65,000
150,000
30 sec./24 hrs.
2 min./24 hrs.
3 hrs./24 hrs.
30 min./24 hrs.
3 hrs./24 hrs.
40 min. @ 250F
2,700
2,590
3,500
3,320
3,460
6,700
3.9
3.9
6.7
22.2
31.6
Solution
Chemistry
Color
Viscosity (cP)
Helpful Hints:
Fixture/Cure Time
STRENGTH
Loctite Adhesive
$1.44
Overlap Weld
00
50
00
1,5
1,0
00
2,
00
50
0
.5
0
.0
00
$3
$3
.5
.0
$2
.5
2,
25% to 75%
Not Recommended
$2
$1
0
.5
.0
3,0
$2.20
$1
$0
00
Recommended
$3.85
Double-sided Tape
3,5
75% or greater
$2.60
Pop Rivets
4,
0
l Highly Recommended
$2.52
1/4" Nut & Bolt
Heat Cure
225F
400F
400F
400F
400F
400F
212F
280F
185F
140F
170F
400F
40994 20 g bottle
40995 1 lb. bottle
247075 25 ml syringe
232749 300 ml cartridge
83129 50 ml cartridge
83127 400 ml cartridge
996453 50 ml cartridge
36160 490 ml cartridge
1078234 50 ml cartridge
1078235 400 ml cartridge
29339 30 ml syringe
29340 300 ml cartridge
LOCTITE 435
Instant Adhesive
Rubber toughened super
glue for use in bonding
applications that require
rapid fixturing and/or high
shear strength on metals,
plastics and/or elastomers.
LOCTITE 334/7387
General-purpose, high
temp. (i.e. 400F), two-step
acrylic for use in bonding
applications that require
fast fixturing and tough,
durable strength (especially
magnet bonding). Requires
activator to cure.
LOCTITE 9460
Versatile, static-mix epoxy
designed for structurally
bonding a large variety
of substrates (especially
composites) in high
temperature applications.
LOCTITE H8000
Robust, static-mix acrylic
designed for structurally
bonding lightly contaminated
substrates (especially
aluminum) parts in weld and
rivet reduction applications.
LOCTITE E-30UT
Ultra tough, high-impact
resistant, static-mix epoxy
designed for structurally
bonding a variety of
substrates (especially metal)
in high-impact applications.
LOCTITE E-214HP
Ultra tough, high-temp. (i.e.
400F) resistant, one-part,
heat cure epoxy designed
to replace welds and rivets
in metal assemblies.
POTTING
AND
ENCAPSULATING
Protecting or Reinforcing Sensitive Components
250F
Solution
Commonly used
in the assembly of
Gensets and Power
Generation Packages
Color
Components
450F
Explosion-Proof Epoxy
Clear Epoxy
Static-Mix Silicone
Rapid Light
Cure Silicone
LOCTITE 3364
LOCTITE E-40EXP
LOCTITE E-30CL
LOCTITE 5611F
LOCTITE 5031
Black
Grey
Clear
Grey
Translucent
45 sec./24 hrs.
35 min./2 hrs.
30 min./24 hrs.
19 min./24 hrs.
30 seconds
5,000
25,000
10,000
5,000
5,500
Dielectric Strength
820V/mil
900V/mil
500V/mil
500V/mil
520V/mil
Linear Shrinkage %
2.0
0.9
1.5
2.6
0.1
Open/Cure Time
Viscosity (cP)
Volume Shrinkage %
6.0
2.7
4.3
7.7
0.3
Helpful Hints:
Shore Hardness
D80
D80
D85
A55
A34
Temperature Resistance
240F
400F
400F
450F
450F
l Highly Recommended
75% or greater
Recommended
25% to 75%
Not Recommended
1166733 50 ml cartridge
1511184 50 ml cartridge
1511653 200 ml
cartridge
237116 50 ml cartridge
237118 400 ml cartridge
1385991 490 ml
cartridge
LOCTITE 3364
Ultra fast curing (i.e.
45sec.), rigid, static-mix
urethane designed for
potting applications which
require superior flame
resistance and fast cure.
UL 94 V-0 rated.
LOCTITE E-40EXP
Ultra high chemically
resistant, rigid, static-mix
epoxy designed for potting
applications which are
in intimate contact with
highly aggressive solvents
and chemicals (including
acetic acid) or require an
explosion-proof rating.
UL-674 and
UL-1203 certified.
LOCTITE E-30CL
General-purpose, rigid, clear,
static-mix epoxy designed for
potting applications, where
optical clarity and excellent
structural, mechanical,
and electrical-insulating
properties are required.
LOCTITE 5611F
Soft, flexible, fast-cure,
static-mix, noncorrosive
silicone designed for potting
applications that require
high temp. resistance (i.e.
450F), high-elongation, and
superior flame resistance.
UL 94V-0 rated.
LOCTITE 5031
Soft, flexible, light-cure-ondemand silicone designed for
use in potting applications that
require rapid cure (i.e. 30sec.),
high-elongation, and high
temp. resistance (i.e. 450F)
WEAR
COATINGS
Protection of Parts Against External Attack
Sliding Abrasion
What temperature resistance do you need?
200F to 250F
450F
Helpful Hints:
For added reliability and ease of preventative
maintenance, consider applying a second
coat of a different color.
Primary Coat
Fluid/Slurry
Secondary Coat
Solution
Total Savings
(Mechanical & Coating)
Mechanical Only
Coating Only
800
LOCTITE Nordbak
Chemical-Resistant
Coating
LOCTITE Nordbak
Brushable Ceramic
LOCTITE Nordbak
Pneu-Wear
LOCTITE Nordbak
High Temp
BrushableCeramic
Red
Red
550F
550F
Working Time
20 min.
30 min.
30 min.
60 min.
120 min.
30 min.
6 hrs.
6 hrs.
6 hrs.
6 hrs.
3 hrs. @ 300F
2 hrs. @ 300F
10,000
10,000
15,000
15,000
16,000
N/A
LOCTITE Nordbak
Chemical-Resistant
Coating
Smooth, glossy, low-friction
finish epoxy coating used
to protect wetted metal
components that need
extreme chemical resistance
and/or reduced turbulence,
abrasion and cavitation.
CFIA Approved.
425
700
High-Slip Coating
450F
850
600
Grey
1,275
500
250F
400
Low Wear
200F
1,700
300
Beaded
Grey or White
200
Smooth
Grey
Pump Wall
Beaded
200F
Package Sizes
100
Smooth
Color
Temperature Resistance
Functional Cure Time
550F
LOCTITE Nordbak
Brushable Ceramic
General-purpose, highslip, wear-resistant epoxy
coating for use on wetted
metal components such
as pipes and pumps.
ABS Approved.
LOCTITE Nordbak
Pneu-Wear
General-purpose, wearresistant epoxy coating with
ceramic beads for added
abrasion resistance against
sliding aggregate in pipes,
elbows, fittings and pumps.
ABS Approved.
GROUTING
Reinforcing and Securing Equipment and Anchor Bolts
No
Setting Anchor
Bolts, Threaded
Rod or Rebar
Solution
Color
110F
200
0
25
Grey
10 to 15 min.
10 min.
30 min.
185 min.
20 min.
24 hours
12 hours
24 hours
24 hours
2 hours
LOCTITE Fixmaster
Marine Chocking
Self-leveling, fast-curing,
non-shrinking epoxy grout
with outstanding chemical
and vibration resistance and
compressive strength to
withstand maximum loads.
ABS Approved.
CFIA Approved (Green).
400
20
Red
14,146
Typical Concrete
15
Black
225F
600
Days
Red
12,900
4Xto9X
Rod OD
10
Orange or Green
225F
LOCTITE Fixmaster
Anchor Bolt Grout
14,500
14,000
LOCTITE Fixmaster
Super Grout
200F
1/16" to
1/8" Rod OD
800
LOCTITE Fixmaster
Deep Pour Grout
14,500
Package Sizes
12,000
LOCTITE Fixmaster
Fast Set Grout
250F
10,000
LOCTITE Fixmaster
Marine Chocking
22,000
16,000
Up to 18"
Up to 6"
Temperature Resistance
Working Time
Helpful Hints:
Up to 1"
30
LOCTITE Fixmaster
Fast Set Grout
Self-leveling, nonshrinking epoxy grout for
installing machinery and
setting anchor bolts with
compression strength
and chemical resistance
superior to concrete.
CFIA Approved.
LOCTITE Fixmaster
Deep Pour Grout
Aggregate-filled, epoxy
system for pours up to
6" deep, including selfleveling applications under
rails andsoleplates.
CFIA Approved.
LOCTITE Fixmaster
Super Grout
Slow-curing epoxy grout
designed for grouting up to
18" deep, including selfleveling applications under
rails and soleplates.
LOCTITE Fixmaster
Anchor BoltGrout
High-strength, non-sag, staticmix structural epoxy, formulated
to anchor threaded rods, bolts,
rebar dowels and smooth dowels
into concrete, grout-filled block
and masonry. Also available
in a high-strength formula.
ANTI-SEIZE
LUBRICANTS
Lubricating and Protecting Metal Components
General-purpose
OAL
N
MET
Solution
Commonly used in the assembly of
Blowout Prevention (BOP) Accumulators
Color
Solid Lubricating Agent
Torque Coefficient
Temperature Range
Helpful Hints:
Consider using anti-seize as gasket dressing
or as a release agent on cut gaskets that are
intended to be reused.
Metal Free
Package Sizes
LOCTITE Marine
Grade Anti-Seize
% Deviation
25.0
20.0
15.0
10.0
5.0
0.0
Dry
Heavy Duty
Product
C5-A
Silver Grade
1800F
2400F
LOCTITE C5-A
Copper Anti-Seize
Lubricant
LOCTITE Nickel
Anti-Seize
OAL
N
MET
LOCTITE Heavy Duty
Anti-Seize
Black
Black
Silver
Copper
Silver
Calcium Sulfonate
Graphite/Calcium Fluoride
Graphite/Aluminum
Copper/Graphite
Nickel/Graphite
0.18
0.16
0.18
0.16
0.13
-20F to 2400F
-20F to 2400F
-20F to 1600F
-20F to 1800F
-20F to 2400F
Yes
Yes
No
No
No
LOCTITE Marine
Grade Anti-Seize
Formulated to protect
assemblies exposed directly
or indirectly to fresh and
salt water, or in high
humidity conditions. It has
excellent lubricity, superior
water wash-out spray
resistance and prevents
galvanic corrosion.
ABS Approved.
1600F
LOCTITE Heavy
Duty Anti-Seize
Excellent lubricity. Provides
outstanding lubrication
to all metals including
stainless steel, aluminum
and soft metals up to
2400F (1315C).
LOCTITE Silver
Grade Anti-Seize
Heavy-duty, temperatureresistant, petroleum-based
lubricant compound,
fortified with graphite
and metallic flake. Inert
and will not evaporate or
harden in extreme cold or
heat. For use in assemblies
up to 1600F (871C).
CFIA Approved.
Solution
Application
Application Temperature
Contact/Dry Time
Helpful Hints:
A quick and easy way to determine
if your parts are clean is to make
sure that they are water-break free.
Bad
Industrial
Cleaner
Metal Pretreatment
Equipment
Ceramic Coating
LOCTITE SF 7900
Spray
Ambient
Touch-up
Cleaner
Coater
Touch-up
BONDERITE
C-MC3000
BONDERITE
M-FE101
BONDERITE
M-NT1455 Wipes
BONDERITE
C-IC 4450
BONDERITE
M-NT5700
BONDERITE
M-NT5700 Wipes
Spray
Brush, Spray
Spray
Wipes
Spray, Immersion
Spray, Immersion
Wipes
Ambient
Ambient
120F-190F
Ambient
120F to 160F
70F to 120F
Ambient
5 seconds
5 seconds
1 to 3 minutes
30 to 180 seconds
10 seconds
1 minute
5 to 180 seconds
10 seconds
Concentration
As Received
As Received
3% to 5%
1% to 3%
As Received
5%
As Received
As Received
Package Sizes
1290334
55 gallon drum
1545630 case of
150wipes
869854 case of
250wipes
LOCTITE SF 7900
Aerosol-based dry film
that effectively protects
welding equipment against
weld spatter for up to
eight hours without the
need forreapplication.
BONDERITE
C-MC3000
Water-based, phosphatefree, foaming cleaner
designed for cleaning
rigs, mining equipment,
trains and other vehicles.
BONDERITE
M-FE101
Concentrated iron
phosphate liquid
product, designed for
steam gun/spray wand
and high-pressure
manual applications
on steel surfaces for
simultaneous cleaning
and conversion coating.
BONDERITE
M-NT1455 Wipes
Pre-saturated wipes
create a conversion
coating on cold-rolled
steel, hot-rolled
steel, galvanized and
armor plate surfaces.
This reaction greatly
enhances adhesion and
corrosion resistance
of paints, sealers
and adhesives.
BONDERITE
C-IC 4450
Concentrated
phosphate-free acidic
cleaner used on
aluminum and its alloys
for cleaning, deoxidizing
and micro-etching
of the metal surface
for activation prior to
conversion coatings.
BONDERITE
M-NT5700
Chromium-free,
conversion-coating
product designed
for spray wand and
high-pressure manual
applications on nonferrous surfaces.
Good
CLEANER
Aluminum
CONDITIONER
CONVERSION COATING
POST TREATMENT
BONDERITE
M-NT5700 Wipes
Pre-saturated wipes
that create a conversion
coating on non-ferrous
metals, which greatly
enhances adhesion and
corrosion resistance
of paints, sealers
and adhesives.
DISPENSING EQUIPMENT
Since 1971, Henkel Corporation has designed, built and integrated high quality equipment solutions. From simple, handheld devices
to fully automated systems and a broad range of accessories, Henkel offers a complete line of off-the-shelf and custom-built
LOCTITEbrand dispensing equipment that can be integrated easily into your manufacturing process.
Item
Numbers
PRODUCT
Used to
Dispense
Bottle Dispensing The most popular handheld bottle-top dispensers for LOCTITE
LOCTITE 50 ml/250 ml Hand Pumps
98414
97001
Package Types
& Sizes
Viscosity
Range
Type
Low to
Medium
Manual
50 ml bottles
250 ml bottles
LOCTITE
200D BENCHTOP
ROBOT
LOCTITE
300D BENCHTOP
ROBOT
LOCTITE
400D BENCHTOP
ROBOT
LOCTITE
500D BENCHTOP
ROBOT
LOCTITE
S440 SCARA-N
ROBOT
3-AXIS
1597107
1452395
1452396
1578317
1008351
4-AXIS
1008338
Benchtop
Benchtop
Benchtop
Benchtop
SCARA
X AXIS
200 mm
300 mm
400 mm
500 mm
Arm 1: 260 mm 90
Y AXIS
200 mm
320 mm
400 mm
500 mm
Z AXIS
50 mm
100 mm
150 mm
100 mm
100 mm
R AXIS
360
WORK SURFACE
5.0 kg
10.0 kg
10.0 kg
10.0 kg
N/A
TOOL HEAD
2.0 kg
5.0 kg
5.0 kg
5.0 kg
5.0 kg
400 mm/s
600 mm/s
600 mm/s
600 mm/s
1500 mm/s
200 mm/s
320 mm/s
320 mm/s
320 mm/s
320 mm/s
PTP (R)
10 to 1,000 /s
1083845
Anaerobic Adhesive
50 ml squeeze tubes
Low to High
Manual
PRODUCT
Pressure-Time Bottle Dispense Systems Versatile systems for dispensing a wide range of products in a variety of adhesive bottle sizes.
982719
LOCTITE Bond-A-Matic
3000 Dispenser
250 ml bottles
1 lb. bottles
1 l bottles
2 kg bottles
Squeeze tubes
Low
Pneumatic
Medium to High
Syringe Dispensing Systems Choose the LOCTITE Posi-Link Volumetric Dispense System for the highest level of dispense precision.
LOCTITE 30 ml Manual
Syringe Applicator
1544934
883976
Any 25 ml or 30 ml syringe
Any
25 ml or 30 ml syringes
3, 5, 10,
30 and 55 ml syringes
TYPE
Low to High
Low to Paste
Manual
RANGE OF OPERATION
Pneumatic
PORTABLE WEIGHT
LIMITATIONS
ITEM NUMBER
1093940
1714379
300 ml cartridges
300 ml cartridges
Medium to High
Medium to High
Manual
Pneumatic
SPEED
ADDITIONAL INFORMATION
Two-Part Dispensing Simple and effective two-part dispensers to meet your lower-precision, dual-cartridge application needs.
98472
LOCTITE 50 ml Dual-Cartridge
Manual Applicators
50 ml dual cartridges
Two-Component Epoxies,
Urethanes, Methacrylates
1034026
LOCTITE 200 ml/400 ml DualCartridge Manual Applicators
LOCTITE 200 ml/400 ml
Dual-Cartridge Pneumatic
Applicators
983436
983438
985246
983437
983439
985249
Please visit www.equipment.loctite.com for detailed drawings of all benchtop robots. Just search for the item number that
you are interested in and scroll down to the product documentation.
Low to High
Manual
50 ml S style cartridges
Two-Component Epoxies,
Urethanes, Methacrylates
Two-Component Epoxies,
Urethanes, Methacrylates
In addition to our standard line of equipment, Henkel offers a number of resources to support your dispensing needs:
High to Paste
Manual
High to Paste
Pneumatic
For more information on our complete equipment offering, visit our equipment Website
at www.equipment.loctite.com or call 1.800.LOCTITE in the US
or 1.800.263.5043 in Canada to speak with a technical representative.
Custom Equipment Systems Looking for an automated dispense workstation, bulk dispense equipment or just something out
of the ordinary? No problem, our team of experienced Application Engineers are ready and willing to help you, from the design
and building phase to the testing and installation phase. Well even train you and your team at your facility or ours. Call your
local LOCTITE Sales Representative or 1.800.LOCTITE (562.8483) for more information.
Discount Equipment and Rental Program Dont quite have the budget or want to evaluate the performance of our
equipment before making a capital investment? No problem, we offer an entire line of Rental and Used Equipment to fit your
needs. Either visit our website, www.equipment.loctite.com or call our equipment experts at 1.800.LOCTITE (562.8483).
Equipment Customer Service At Henkel, our support of your LOCTITE branded equipment doesnt stop after your purchase.
If you have an equipment question or need help setting up or troubleshooting your LOCTITE branded equipment, then call our
team of Equipment Service experts at 1.800.LOCTITE (562.8483). Theyll even coordinate having your equipment repaired or
rebuild services, if necessary.
INDEX
By Item Number
Item No. Product Name
Pkg. Size
Page
18607
1 liter bottle
19
LOCTITE 232
Pkg. Size
76732
Page
29
Pkg. Size
Page
Pkg. Size
Page
31
1329505
250 ml bottle
13
32
1330335
250 ml bottle
13
17
1330585
50 ml bottle
13
490 ml cartridge
23
20166
LOCTITE 5900
300 ml cartridge
17
77124
29
883976
3, 5, 10, 30 and
55ml syringes
20167
LOCTITE 5900
50 lb. pail
17
77164
29
922546
LOCTITE 5600
400 ml dual
cartridge
21472
LOCTITE 5920
40 lb. pail
17
82046
LOCTITE 5920
300 ml cartridge
17
982719
32
1385991
LOCTITE 5611F
27863
LOCTITE 232
250 ml bottle
19
83127
LOCTITE 9460
400 ml cartridge
21
982722
32
1452395
33
983436
200 ml dual
cartridges
32
1452396
33
983437
200 ml dual
cartridges
32
1511184
LOCTITE E-40EXP
50 ml cartridge
23
983438
400 ml dual
cartridges
32
1511653
LOCTITE E-40EXP
200 ml cartridge
23
983439
400 ml dual
cartridges
32
1544934
25 ml or 30 ml
syringe
32
985246
490 ml dual
cartridges
32
1545630
31
29031
29041
29339
29340
29514
50 ml bottle
250 ml bottle
30 ml syringe
300 ml cartridge
50 ml bottle
13
13
21
21
13
83129
96092
96102
96332
96433
LOCTITE 9460
LOCTITE Nordbak Chemical-Resistant Coating
LOCTITE Fixmaster Marine Chocking
LOCTITE Ultra High Temp Pneu-Wear
LOCTITE Nordbak High Temp BrushableCeramic
50 ml cartridge
12 lb. kit
2 gallon kit, Orange
25 lb. kit
2 lb. kit
21
25
27
25
25
29515
250 ml bottle
13
97001
250 ml bottles
32
985249
490 ml dual
cartridges
32
1578317
33
33510
5 gallon kit
27
98372
25 lb. kit
25
996453
LOCTITE H8000
50 ml cartridge
21
1597107
33
34026
29
98382
25 lb. kit
25
997369
12 lb. kit
25
1616692
LOCTITE SF 7900
31
300 ml cartridges
32
34395
29
98383
3 lb. kit
25
1008338
4-Axis
33
1714379
36160
LOCTITE H8000
490 ml cartridge
21
98414
50 ml bottles
32
1008351
3-Axis
33
1835918
LOCTITE 648
250 ml bottle
19
32
1034026
50 ml S Style
cartridges
32
1835920
LOCTITE 648
50 ml bottle
19
37127
19 g stick
15
98472
50 ml dual
cartridges
37229
20 g stick
29
98732
25
1078234
LOCTITE E-30UT
50 ml cartridge
21
1835925
LOCTITE 638
250 ml bottle
19
37230
20 g stick
29
98733
25
1078235
LOCTITE E-30UT
400 ml cartridge
21
1835936
LOCTITE 638
50 ml bottle
19
37316
27
99545
5 gallon kit
27
1083845
50 ml squeeze
tubes
32
40994
20 g bottle
21
135520
LOCTITE 640
50 ml bottle
19
1093940
300 ml cartridges
32
40995
1 lb. bottle
21
135521
LOCTITE 640
250 ml bottle
19
1108885
27
41205
20 g stick
29
232749
LOCTITE 334/7387
300 ml cartridge
21
1134601
30 g syringe
13
51041
LOCTITE 510
250 ml tube
17
237116
LOCTITE E-30CL
50 ml cartridge
23
1134602
300 g cartridge
13
51074
LOCTITE 510
300 ml cartridge
17
237118
LOCTITE E-30CL
400 ml cartridge
23
1134607
50 ml bottle
13
51147
29
247075
LOCTITE 334/7387
25 ml cartridge
21
1138281
250 ml tube
15
51605
29
593055
5 gallon pail
31
1138284
50 ml tube
15
51831
50 ml tube
17
593056
55 gallon drum
31
1158518
2 gallon kit
27
51845
LOCTITE 518FlangeSealant
300 ml cartridge
17
594136
BONDERITE M-NT5700
55 gallon drum
31
1166733
LOCTITE 3364
50 ml cartridge
23
54531
50 ml bottle
15
594296
BONDERITE M-FE101
55 gallon drum
31
1241991
LOCTITE 5188
300 ml cartridge
17
54541
250 ml bottle
15
594996
55 gallon drum
31
1253203
LOCTITE 5188
50 ml tube
17
56747
50 ml tube
15
595996
BONDERITE M-NT5700
5 gallon pail
31
1265769
50 ml tube
15
56765
250 ml tube
15
599021
5 gallon pail
31
1265770
250 ml tube
15
62040
LOCTITE 620
50 ml bottle
19
693986
LOCTITE 5031
300 ml cartridge
23
1290334
BONDERITE C-MC3000
55 gallon drum
31
62070
LOCTITE 620
250 ml bottle
19
772110
BONDERITE M-FE101
5 gallon pail
31
1329467
50 ml bottle
13
PROPOSED METHOD
ENGINEERING DATA
CURRENT METHOD
TARGET
ACCOUNT
ACCOUNT
CONTACT
TITLE
ADDRESS
CONTACT
TITLE
ZIP
END
PRODUCT
PHONE
E-MAIL
ASSEMBLY
VALUE $
ASSEMBLY
SIC
CODE
APPLICATION
VISCOSITY
CURRENT PROBLEMS
ANNUAL
UNITS
SUBSTRATES
BOND AREA
OPG TEMP
LABOR $
LOAD
TO
FIXTURE
TIME
CYCLE TIME
GAP
/ HR. $
ENVIRONMENT
APPROVALS
PACKAGE REQUIRED
/ YR.
PAYBACK
TIME
ADHESIVE/ACTIVATOR
ID OR
SOURCE
EQUIPMENT
ASSEMBLY METHOD
HENKEL ADVANTAGES
SUBSTRATES:
APPLICATION AREA:
BOND GAP:
PACKAGE: (CURRENT&DESIRED)
TEMP: INTERMITTENT/CONTINUOUS
C/F
PRODUCTION TYPE:
MANUAL
SEMI-AUTOMATED
AUTOMATED
ENVIRONMENT:
(CURRENT&DESIRED)
MANUAL
SEMI-AUTOMATED
AUTOMATED
APPROVALS:
ANNUAL UNITS:
ISSUE
EVIDENCE
ECONOMIC IMPACT
QUALIFICATION PROCESS
PROJECT DRIVERS
PRIORITY
STEPS
DECISION
WHEN
WHO
HOW
With engineering support in over 70 countries around the globe, principal R&D
facilities in USA, Germany, China and Japan, and a network of technical centers, our
extensive global network provides you with unrivaledassistance.
OWNER
STATUS
ACTIONS
ACTION
LT-1376
USA
Henkel Corporation
Engineering Adhesives
One Henkel Way
Rocky Hill, Connecticut 06067
Tel: 860.571.5100
Fax: 860.571.5465
www.henkelna.com/industrial
www.henkelna.com/LOCTITE
CANADA
Henkel Canada Corporation
2515 Meadowpine Blvd.
Mississauga, Ontario, Canada L5N 6C3
Tel: 1-800-263-5043 (within Canada)
Tel: 905-814-6511
Fax: 905-814-5391
www.LOCTITE.ca
www.henkelna.com/oilandgas
Except as otherwise noted, all marks are trademarks and/or registered trademarks of Henkel and/or its affiliates in the U.S. and elsewhere.
= registered in the U.S. Patent and Trademark Office. 2013 Henkel Corporation. All rights reserved. 11363/LT-6802 (12/13)