0 évaluation0% ont trouvé ce document utile (0 vote)
13 vues1 page
Little Pablo is going to Winchester to meet Abbie the Chartered Accountant. Follow the two as they get into amusing scrapes trying to walk around a small Southern English town.
Little Pablo is going to Winchester to meet Abbie the Chartered Accountant. Follow the two as they get into amusing scrapes trying to walk around a small Southern English town.
Little Pablo is going to Winchester to meet Abbie the Chartered Accountant. Follow the two as they get into amusing scrapes trying to walk around a small Southern English town.
| Version 3.10 RELEASE NOTES | | (c) FAROS MARCH 2000 | +------------------------------------+ This file lists the points which have changed between the version V3.03 and the version V3.10 of the Airbus-A320 FMGS Free-Play Trainer software. +------------------------------------------------------------------------------+ ! CAUTION: this software in 3D configuration MUST be used with firmware REV2.3 ! ! or higher for the FCU (see item 8 below). ====== ! +------------------------------------------------------------------------------+ 1. Addition of Guided Practice capability for the 2D configuration. 2. Handling of 'SELECT DESIRED SYSTEM' MCDU message. 3. Correction of RF#367_1 : handling of NEXT PAGE arrow on 'INIT A' page (disappears now after engine start). 4. Correct display of Vls speed on 'PERF APPR' and 'SEC PERF APPR' pages (in green color). 5. When in TRK/FPA mode, the A/C symbology is now correctly dimmed on the PFD. 6. When in TRK/FPA mode, in a turn and with wind, the FPV and FPD are now displayed correctly. 7. When a DIR TO is performed while the 'FINAL APP' mode is engaged, the Autopilot is now correctly disengaged and the lateral and vertical modes revert to basic modes. 8. In 3D configuration, some errors of the turn direction when in Lateral Selected mode have been correctd. They occurred mainly when the HDG selection was turned too fast. 9. Distance, Bearing calculation and display problems for segments crossing the longitude 180 degrees East or West have been corrected. 10. In the 2D configuration, the FCU Range and Mode display selectors positions are saved in the Lesson Plans. 11. In the 2D configuration, the repeat function of the up and Down arrows on the MCDU are now simulated (every second). 12. Correction of NWA#133, NWA#137, NWA#138, NWA#201, NWA#203, NWA#204, NWA#205,