Académique Documents
Professionnel Documents
Culture Documents
Technical Highlights
Any mix of voice and data interfaces
using the wide selection of Dynanet
channel units
Easy adaptability to future services
Satisfies ETSI Open Network Provision
requirements for leased line networks
One-way digital branching
Decentralised powering for extra
reliability.
Local or remote control of equipment
parameters
Centralised network management
Several installation options
Applications
Basic concept
The DM2+ was designed for multiplexing analogue speech and signalling as
well as data channels of different bit
rates into a common 2 Mbit/s frame.
It can be used:
as a traditional PCM multiplexer in
subscriber and junction line networks;
in corporate networks to provide a
full range of voice, ISDN and data
services;
as one-way branching equipment to
enable the efficient use of channels
in rural areas or in private networks;
for efficient data multiplexing, e.g.,
X.58 and V.110 on low bit rates.
Specific features
The allocation of an Embedded
Operations Channel (EOC), or Service
Channel, into any vacant time slot in
a 2 Mbit/s aggregate can be used to
extend the Nokia Q1 management
bus. This can be done using the Service Terminal when time slot zero is
not available, for example when using
the Leased Line network. The DM2+
satisfies the Open Network Provision
requirements for leased line networks.
One-way branching
The DM2+ can be equipped with one
of several 2 Mbit/s Dynanet channel
units to provide efficient digital one-way
branching in chain and tree networks.
Channels from different sites can be
freely and dynamically combined into a
common 2 Mbit/s frame. The dynamic
allocation provides the possibility to
change branching configurations during normal operation. This allows the
flexible utilisation of transmission capacity in rural and corporate networks.
Technical Data
Product codes
Main characteristics
Electrical Interfaces
21116
21117
21147.02
21147
Mechanical Dimensions
Environmental specifications
2048 kbit/s
ITU-T Recommendations
Bit rate
Code
Pulse shape
Peak voltage/impedance
Peak voltage tolerance
Pulse width
Input signal attenuation
Number of 2 Mbit/s interfaces
G.703, G.823
2048 kbit/s 50 ppm
HDB3
Rectangular
3V/120 ohms, 2.37V/75 ohms
10%
244 +/- 20ns
0 to 6 dB at 1024 kHz
Limited by subrack space only
Power Feeding
Flexible installation
ITU-T recommendations
Bit rate
Bits per time slot
Time slots per frame
Time slots for voice and data
Frames per multiframe
Multiplexing
VF and data
Other interfaces
Service interface
Auxiliary data channel
Programmable E&M alarm
outputs
active state
passive state
20...72 VDC
NDM 19 subrack
(16 plug-in units)
NDM 8-slot subrack
(7 plug-in units)
NDM 4 slot subrack
(4 plug-in units)
Height
297 mm
Width
450 mm
Depth
222 mm
322 mm
112 mm
218 mm
Operation
Electromagnetic compatibility (EMC)
3W
297 mm
225 mm
214 mm
www.nokiasiemensnetworks.com