Académique Documents
Professionnel Documents
Culture Documents
for superior
efficiency.
Grain Processing
Customer Service
800
700
600
500
400
C-roll pair
B-roll pair
300
200
7.5 10 12.5 15 17.5 20 22.5 25 27.5 30 32.5 35 37.5 40 42.5 45
Graphic 1
Belt drive (guard removed)
The new belt drive for the MDDK/L roller mill offers
substantial advantages over the gear drive version
(see box at right).
This power transmission is easy to install and makes
maintenance very much easier and more cost efficient.
Buhler scope of supply:
The retrofit kit is supplied complete with all the
components required for installation, including conversion
instructions.
The assembly kit includes 1 spare belt. For the
conversion, one installation set is required per plant.
The price does not include installation.
Time requirement for conversion is two to three hours per
roll pair.
CAUTION: Applies to MDDK/L
The roll speed must be checked for the correct torque and
if necessary be modified at the drive end. Graphic 1
shows the minimum speed, which must always be
reached. If the roll motor power is known, it will be
possible to derive the speed. If the speed is too low, this
will reduce the belt service life.
CAUTION: Applies to MDDL
In order to prevent a collision between the drive belts of
the top mating pass (1) and the transmission (2), the drive
belt must not go beyond the center (3) of the roller mill
(Graphic 2). If necessary, the drive motor may have to be
slightly moved.
Your benefits
-
Easy conversion
High power
Easy maintenance
Graphic 2
1. Drive belts of top
mating pass
2. Transmission
3. Drive belt max. to
center of roller mill
Passages
No. of units
Passages
Ratio 1 : 1.23
MDDP-80018-810
Ratio 1 : 1.23
MDDP-80038-810
Ratio 1 : 1.51
MDDP-95136-810
Ratio 1 : 1.51
MDDP-95140-810
Ratio 1 : 2.0
MDDP-95137-810
Ratio 1 : 2.0
MDDP-95141-810
Ratio 1 : 2.5
MDDP-95135-810
Ratio 1 : 2.5
MDDP-95139-810
Ratio 1 : 2.9
MDDP-95138-810
Ratio 1 : 2.9
MDDP-95142-810
No. of units
Ratio 1 : 1.23
MDDQ-80445-810
Ratio 1 : 1.23
MDDQ-80446-810
Ratio 1 : 1.51
MDDQ-95476-810
Ratio 1 : 1.51
MDDQ-95480-810
Ratio 1 : 2.0
MDDQ-95477-810
Ratio 1 : 2.0
MDDQ-95481-810
Ratio 1 : 2.5
MDDQ-95478-810
Ratio 1 : 2.5
MDDQ-95482-810
Ratio 1 : 2.9
MDDQ-95479-810
Ratio 1 : 2.9
MDDQ-95483-810
Ratio 1 : 1.04
MDDP-95143-810
Ratio 1 : 1.04
MDDP-95144-810
Ratio 1 : 1.27
MDDP-80039-810
Ratio 1 : 1.27
MDDP-80040-810
5 Belt solution (existing machine with 5 belt solution, order 1 per belt drive)
MDDL
MDDQ-95561-810
MDDK
MDDQ-95562-810
UNN-64503-052
Tools +
1 spare belt
Tools +
1 spare belt
MDDQ-95525-810
Conversion Instruction
MDDQ-10088-001
MDDK-MDDL 65715-2-1
We would be pleased to send you a quotation. For this purpose, please send the completed form to your Buhler
contact.
Company
Address
Ordered by
Phone / email
Place / date
Signed
Order no.
Machine no.
Diagram no.
Remarks
Bhler AG
Grain Processing Customer Service
CH-9240 Uzwil, Switzerland
T +41 (0)71 955 30 40
F +41 (0)71 955 33 05
service.gp@buhlergroup.com
www.buhlergroup.com
Retrofit MDDK/L-Belt_drive
BUZ/GPCS41 11/2010/en