Académique Documents
Professionnel Documents
Culture Documents
Legal Notice
Intellectual Property Rights
All copyrights and intellectual property rights for Nokia Siemens Networks training documentation, product
documentation and slide presentation material, all of which are forthwith known as Nokia Siemens Networks
training material, are the exclusive property of Nokia Siemens Networks . Nokia Siemens Networks owns the
rights to copying, modification, translation, adaptation or derivatives including any improvements or
developments. Nokia Siemens Networks has the sole right to copy, distribute, amend, modify, develop,
license, sublicense, sell, transfer and assign the Nokia Siemens Networks training material.
Individuals can use the Nokia Siemens Networks training material for their own personal self-development
only, those same individuals cannot subsequently pass on that same Intellectual Property to others without
the prior written agreement of Nokia Siemens Networks .
The Nokia Siemens Networks training material cannot be used outside of an agreed Nokia Siemens Networks
training session for development of groups without the prior written agreement of Nokia Siemens Networks.
Module Objectives
Describe Extended Cell Range for CS calls
Explain parameters controlling handovers in a Extended Cell
Explain the Long Reach Timeslot for Flexi BTS
f1
N-TRX
E-TRX
(Delayed receiver)
BCCH/
SDCCH
f1
Not
Used
f1
TCH
f1
TCH
f1
TCH
f1
f1
TCH
TCH
f1
f2
f2
f2
f2
f2
f2
f2
TCH
E-RACH SDCCH
0
5
f1
TCH
TCH
TCH
TCH
TCH
TCH
Call Setup
Overlap area: RACH is recived on N-TRX and E-TRX. BSC filters the later one out
6
Extended Cell
Cell Selection
MS can camp on BCCH (NTRX) independent of the distance to the BTS
RACH from MS detected on RACH or E-RACH depending on the distance to the BTS
Failure of RACH burst
0..63
minMSDistanceHOThreshold (MIN)
0..63
0 Normal cell
1 - Allocate from N-TRX
2 Allocate from E-TRX
3 Allocate from TRX of the same type as source BTS
Extended Cell
Use of Double BA list
The Double BCCH Allocation List (Double BA List) may be needed in the extended cell range
solution because otherwise some legacy MSs do not work properly
Use of LRTCH
BTS measures TA by scanning both LRTCH for the handover access burst
BTS sends the ACCESS DELAY information to BSC
ACCESS DELAY < maxMSDistanceHOThreshold MAX: Normal cell area
ACCESS DELAY >= maxMSDistanceHOThreshold MAX : Extended cell area
10
TA (adj) = TA (meas)
UL is synchronized to E-TRX
UL is synchronized to N-TRX
E-RACH of STRX overlaps with tsl 0 and 1 of BCCH (just like E-RACH of
ETRX)
SDCCH defined on S-TRX
Normal and Super Extended
N-TRX RX
f1
Normal
f1
f1
f1
f1
f1
TCH
TCH
f1
BCCH/ Not
TCH
RACH/ i n use
SDCCH
TCH
TCH
TCH
f2
f2
E-TRX RX
f1
TRX
f1
f2
f2
f2
f2
f2
E-TRX
E-RACH SDCCH TCH
TCH
TCH
TCH
TCH
TCH
f3
f3
40%
Delayed
receiver
S-TRX RX
f1
f3
f3
f3
f3
f3
S-TRX
E-RACH SDCCH TCH
80%
Delayed
receiver
11
TCH
TCH
TCH
TCH
TCH
SEXT
MAX
MIN
SMIN
SMAX
TRX Level
E-TRX Type = S
1.
2.
BTS Level
Super Radius Extension (SEXT)
Location of inner edge of super
extended area from the BTS
Range: 0, 36-70
Handover Control
MS distance HO
threshold super ext cell min (SMIN)
Range: 063
BTS
4.
3.
MS distance HO
threshold super ext cell max (SMAX)
Range: 063
N-area: 35 km
E-area: 35 km
S-area: 35 km
Overlap area (E/S)
1. Mobile is moving in Normal area (away from BTS), TA MAX => handover to Extended area triggers
2. Mobile is moving in Extended area (away from BTS), TA SMAX => handover to Super extended area triggers
3. Mobile is moving in Super extended area (towards BTS), TA SMIN => handover to Extended area triggers
4. Mobile is moving in Extended area (towards BTS), TA MIN => handover to Normal area triggers
12
External handovers
Performed thru LRTCH if it is in use
If not in use, HO to super extended
area
SRC Concept
13
SRC consists of :
Downlink link enhancing feature
Intelligent Downlink Diversity (IDD)
Uplink enhancing features
4-way UL Diversity (4UD)
Interference Rejection Combining (IRC)
High gain MHA
Up and downlink features can also be implemented
separately (except for 4UD, which is used with IDD)
IDD Concept
14
4-way UL Diversity
Very efficient Interference Rejection
Combining is processed for received
signals giving ultimate gain for diversity
reception. IRC minimizes the effect of
interfering signals in the BTS receiver.
MHA
MHA
RX + TX
Masthead Amplifier compensates
feeder loss and matches front end of
the BTS receiver optimizing sensitivity
RX div.
RX div.
RX div.+
15
TX aux
DDU
EDGE
Transceiver
EDGE
Transceiver
Baseband
Units
Downlink
signal
Combined
Uplink
signal
16
SRC+MHA
SRC+MHA
DL
SRC,SRC,
no MHA
no MHA
UL
combiner
by-pass
combiner
by-pass
+ MHA
DL
UL
combinercombiner
by-pass, by-pass
no MHA
UL
Bypass,
No MHA
UL
DL
DL
Bypass
+MHA
SRC
+ MHA
SRC,
no MHA
17
If IDD is used only for boosting the BCCH carrier, the IDD TRX has to be
defined in the BSC as preferred BCCH TRX
18
STIRC is compatible with Smart Radio Concept for EDGE (SRC). All antenna configurations
are supported. However, 4-way uplink diversity configurations provide the best performance.
Link level simulations show interference rejection performance of GMSK channel under typical
urban (TU) conditions improving on average 4 - 10 dB gain compared to IRC (for 2-way uplink
diversity (2UD)) - The actual gain is network and configuration dependent
19
different branches (normal and diversity) and samples for each symbol period. Usually, the
interference correlation is different from the correlation of the desired signal.
IRC is a set of diversity combining, digital signal processing methods that removes
interference by taking these cross correlations into account.
between the individual branches and samples of each symbol which, if done perfectly, optimizes
the performance of the receiver, in particular the bit (0/1) detection process.
STIRC works best when there is a single dominant interferer and it is best suited for urban
areas
Whitening
Whitening
Interference Rejection
Combining (IRC)
20
Whitening,
jointly
estimated
MO
Class
BTS
21
Abbreviated
Name
stircEnabled
STIRC is disabled
(N) (0), STIRC is
enabled (Y) (1)
Description
Default
value
STIRC is
disabled
(N) (0)
BSC - MML
Name
STIRC