Vous êtes sur la page 1sur 5

PERFORMANCE OF INTERNAL COMBUSTION ENGINE

(DATA GATHERING FOR THE EXISTING DIESEL-GENERATING SET)


Plate No. 1

DIESEL GENERATING SET BESIDE THE COLLEGE OF


ENGINEERING BUILDING
I.

OBJECTIVES
1. To be able to identify the different types of diesel-generating set
installed in CMU compound.
2. To be able to gather data on the technical specifications of Diesel
engine and the attached generator.
3. To be able to gather data on the different components involved in
the fuel system and cooling system.
4. To be able to gather other important data like bedplate and
foundation which are needed for the reference and for total
evaluation/assessment of the system.
5. To be able to make or draw floor plan for the visited power
houses.

II.

TECHNICAL SPECIFICATIONS
1. DIESEL ENGINE SPECIFICATION
Design
Bore
Stroke

AngeloDisplacement
A. Acenas
Name

4 cycle, In-line, naturally aspirated


4 stroke engine

PERFORMANCE OF INTERNAL
COMBUSTION ENGINE
(DATA GATHERING

FOR THE EXISTING DIESELGENERATING SET)

DATE GIVEN: 06/15/15

No. of Cylinders
6 cylinders DATE DUE: 06/18/15
PLATE
No.
1 Cast Iron
ME 61 (ME LABORATORY
Cylinder BlockIII)
Alloy
DATE SUBMITTED: 06/15/15
Battery Charging
Alternator ____ Amps
Starting Voltage
12 Volt, negative ground
Fuel System
Direct Injection
Fuel Capacity (Fuel Tank)
Fuel Consumption

Operating Pressure for oil


Fuel Filter

Spin-on

fuel

filters

with

water

separator

Air Cleaner Type


Lube Oil Filter Type
Standard Cooling System

Dry replaceable element


Spin on full flow filter, filtration efficiency 25 micron 99%

2. GENERATOR SET SPECIFICATIONS


Generators brand:MarelliGenerators
Power (kilovolts-Ampere): 160 KVA
Rotational speed: 1785 rpm
Frequency: 59.5 Hertz
Rated Power Factor:
Voltage: 230 volts
Phase:

III. OTHER IMPORTANT INFORMATION/DATA


A) Starting-up procedure of the engine
B) Shutting-down procedure of the engine
C) Preventive Maintenance Done

IV. SKETCH/DRAWING
A. Open Set
____ B=
_____

Model

Dim A mm

Dim B mm

311 cm

Dim C mm

110.5
____
B. B=
_____

Enclosed set

Model

Dim A mm

Dim B mm

Dim C mm

DIESEL GENERATING SET BESIDE THE UNIVERSITY


CONVENTION CENTER
I. TECHNICAL SPECIFICATIONS
1. DIESEL ENGINE SPECIFICATION
Design
Bore
Stroke
Displacement
No. of Cylinders
Cylinder Block
Battery Charging

4 cycle, In-line, naturally aspirated


4 stroke engine
6 cylinders
Alloy Cast Iron
Alternator ____ Amps

Starting Voltage
Fuel System
Fuel Capacity (Fuel Tank)
Fuel Consumption
Operating Pressure for oil
Fuel Filter

12 Volt, negative ground


Direct Injection

Spin-on

fuel

filters

with

water

separator

Air Cleaner Type


Lube Oil Filter Type
Standard Cooling System

Dry replaceable element


Spin on full flow filter, filtration efficiency 25 micron 99%

2. GENERATOR SET SPECIFICATIONS


Generators brand:MarelliGenerators
Power (kilovolts-Ampere): 160 KVA
Rotational speed: 1887 rpm
Frequency: 62.9 Hertz
Rated Power Factor:
Voltage: 239 volts
Phase:

III. OTHER IMPORTANT INFORMATION/DATA


A) Starting-up procedure of the engine
B) Shutting-down procedure of the engine
C) Preventive Maintenance Done

IV. SKETCH/DRAWING
A. Open Set

B=

Model

Dim A mm

340 cm

Dim B mm

Dim C mm

122.5

181 cm
B. B=
____
_____

Enclosed set

Model

Dim A mm

Dim B mm

Dim C mm

V. COMMENTS/REMARKS/RECOMEMNDATIONS
Generators nowadays perform a special task in the field of industrial land areas
when electricity is absent. We did study the sets of generators specifically the
diesel engine generating set in Central Mindanao University in different colleges by
gathering the important data in each generator such as; dimensions, brand names,
power consumption, maintenance and others, in that, we study into conclusions
that the generator perform depend of the load being delivered into industry. Sizes
matter in field of distribution of power consumption into industrial processes.

Vous aimerez peut-être aussi