Académique Documents
Professionnel Documents
Culture Documents
TTTNPSFC
Issue 26.0
Australia
Siemens Rail Automation Pty Ltd
T: +61 1300 724 518
E: rail-components.au@siemens.com
Indonesia
P.T. Siemens Indonesia
T: +62 21 2754 3470
E: warren.matthew@siemens.com
Malaysia
Siemens Malaysia Sdn. Bhd
T: +60 3 7952 5075
E: seatkoh.yiu@siemens.com
New Zealand
Siemens (N.Z.) Limited.
E: rail-components.au@siemens.com
Thailand
Siemens Limited
T: +66 (0) 2 718 2170
E: chakkarin.prinyasart@siemens.com
Short-Form Catalogue
Document CI:
TTTNPSFC
Issue:
26.0
Date of Issue:
November 2014
Copyright
Transmittal, reproduction, dissemination or editing of this document is prohibited. Use of this documents contents and
communication thereof to others without express authorization is also prohibited. Offenders will be held liable for
payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved.
Siemens Rail Automation Pty Ltd 2014. All rights reserved. ABN 78 000 102 483
CONTENTS
SECTION
PAGE
1 Signals
1.1 Colour Light and LED Signals
1.1.1 Complete Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Sigmaguard Style L Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sigmaguard Style LS Searchlight Replacement Signal . . . . . . . . . . . . . . .
Sigmaguard LED Style U2L Colour Light Signals . . . . . . . . . . . . . . . . . . .
Sigmaguard LED Style Close-up Signals . . . . . . . . . . . . . . . . . . . . . . . . . .
11
11
11
12
12
13
13
13
13
14
14
14
14
15
15
15
2 Points
2.1 Electric Point Machines
Switchguard One Trough S 700 V Points Operating System . . . . . . . . . .
Switchguard M3A Mk II Electric Point Machine
(Emergency Hand Crank) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switchguard M23A MkII Electric Point Machine (Dual Control) . . . . . . .
Switchguard Series 84M MkIII Point Machine (Universal) . . . . . . . . . . . .
Switchguard S 700 K Point Machine ...NEW . . . . . . . . . . . . . . . . . . . .
Switchguard SURELOCK ...NEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clearguard Circuit Controller Retrofit Kit . . . . . . . . . . . . . . . . . . . . . . . . .
17
17
17
17
18
18
18
CONTENTS
SECTION
PAGE
19
19
20
20
2.5 Bearers
Switchguard In-Bearer Point Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3 Relays
Style Q Plug-in Relays Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
23
23
23
23
24
24
24
24
25
25
25
25
26
26
26
26
26
27
27
27
27
CONTENTS
SECTION
PAGE
27
27
27
27
27
28
3.8 Timers
Timer Style QTD1 Dual Non-Vital . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Timer Style QTD4 Delay to Drop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Timer Style QTD5 Delay to Pick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Timer Style QCJ1 Non Vital Point Machine . . . . . . . . . . . . . . . . . . . . . . .
28
28
28
28
3.11 AC Relays
Relay Style QNHX1 Interface to WESTLOCK and SSI . . . . . . . . . . . . . . . . 29
Relay Style QWCX1for Point Machine Motor Proving . . . . . . . . . . . . . . . 29
Relay Style QNHCX1 Interface to WESTLOCK and SSI . . . . . . . . . . . . . . . 29
5 Train Detection
5.1 Audio Frequency Overlay Track Circuits
Clearguard Intelligent Processor Island Track Circuit (IPITC) . . . . . . . . . .
Clearguard Phase Shift Overlay 4000 (PSO 4000) . . . . . . . . . . . . . . . . . .
Wayguard PSO GCP 4000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clearguard Series Overlay Circuit Track Circuit (SOTC) . . . . . . . . . . . . . .
31
31
31
31
32
32
32
32
5.4 Accessories
Style TD4 Track Disconnection Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CONTENTS
SECTION
PAGE
6 Trainstops
6.1 Trainstops (Trip Type)
Trainguard Trainstop, Style JA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Trainguard Trainstop, Style JAH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Trainguard Trainstop Power Unit, Style EH1 . . . . . . . . . . . . . . . . . . . . . .
Clearguard Circuit Controller Retrofit Kit . . . . . . . . . . . . . . . . . . . . . . . . .
35
35
35
35
37
37
37
37
38
9.3 Barrier
Wayguard Level Crossing Barrier Arms . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Wayguard Pre-Dressed Level Crossing Barrier Arms ...NEW . . . . . . . . 39
40
40
41
41
42
9.6 Installations
Crossing in a Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
43
43
43
44
44
44
44
45
45
45
45
46
46
46
CONTENTS
SECTION
PAGE
46
46
46
46
47
47
47
47
47
48
48
49
49
49
50
50
50
50
50
51
51
51
51
52
52
52
52
53
53
53
53
53
54
11 Accessories
11.1 Terminal Blocks
RSA Double-Row Terminal Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
CONTENTS
SECTION
PAGE
55
56
56
56
56
57
11.3 Resistors
Sealed Resistors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Resistance UnitsAdjustable, Fixed . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
11.4 Tools
Insulated Terminal Wrenches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Relay Tag Crimping Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact Removal Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Barrier Mechanism Toolkit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Track Circuit Short Finder ...Improved . . . . . . . . . . . . . . . . . . . . . . . .
57
58
58
58
58
13 Services
13.1 Training
Railway Signalling Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
10
SIGNALS
1. Signals
1.1
1.1.1
Complete Signals
Sigmaguard Style L Signal
Datasheet 1A-12
Mainline LED signal:
one to four aspects
three beam patterns
red, yellow, green, white or blue aspects
110 Vac or 12 Vdc operation
lamp proving option available
Short-Form Catalogue
Issue 26.0
11
1
1.2
SIGNALS
Subsidiary Signals
1.1.2
Rear-Access
Retrofit Kit
1.2
Subsidiary Signals
Sigmaguard LED Style L Junction Route Indicator
Datasheet 1C-5
LED Style L Junction Route Indicator that mounts to the top of a colour
light signal to indicate when the signal is cleared for a diverging route:
medium range optics
five 127 mm lunar white LED lamp modules
can be inclined 45 to the left or right
12
1
1.2
SIGNALS
Subsidiary Signals
Short-Form Catalogue
Issue 26.0
13
1
1.2
SIGNALS
Subsidiary Signals
14
1
1.3
SIGNALS
1.3
Short-Form Catalogue
Issue 26.0
15
1
1.3
SIGNALS
Masts and Hardware
16
2
2.1
POINTS
2. Points
2.1
Short-Form Catalogue
Issue 26.0
17
2
2.2
POINTS
Pneumatic Point Controllers
...NEW
Datasheet A19100-V100-B802-V3-7600
For setting points with external locking. Economical and versatile, making
it suitable for use in mass transit and mainline transport with points of all
types and gauges.
Economical operation
High level of availability
Universal application
Robust, compact design
Long service life, long maintenance intervals, short out-of-service
periods
Switchguard SURELOCK
...NEW
Datasheet A19100-V100-B951-X-7600
Point drive system suitable for use in mass transit and mainline
transport.
2.2
18
POINTS
A Valve
Controller for pneumatic points control.
2
2.3
...Improved
Datasheet 2D-6
Low profile, one to four slide point detectors.
Upgraded point detection switch.
Short-Form Catalogue
Issue 26.0
Series
Feature
HMX
HM
19
2
2.4
POINTS
Mechanical Point Equipment
...NEW
Datasheet A19100-V100-B927-V1-7600
Detects the end positions of points (centre lock, high-speed, manually
operated, spring return), mechanical latching devices, movable frogs and
wing rails. Can also be used to detect the locking function, indicate trailing
operations, and detect gauge narrowing.
Slide stroke continuously adjustable from 30 to 190mm.
Fitted without modification to all rail profiles
2.4
20
POINTS
2.5
Bearers
...Improved
Datasheet 2H-2
D150 DerailProtects against runaway vehicles entering an operational
line.
C150 CrowderUsed in conjunction with the D150 Derail to prevent rerailing that can occur in some conditions (recommended)
Concrete Bearer Kits everything you need but the thruster, including
derail, crowder, 2 custom concrete bearers, rodding and all fixings to suit
most drives, rail gauges and rail sizes.
MkII Enhancements
more effectively handle vehicles at higher speeds or fitted with bogie
wheels
readily retrofitted to MkI units by replacing single parts in the derail and
crowder
2.5
Bearers
Switchguard In-Bearer Point Drive
Datasheet 2I-1
A comprehensive bearer, point drive and rail head locking solution.
Encases all rodding, detection and point drive within a high strength rolled
steel bearer:
fully machine-tampable
clawlock rail head locking
drive from existing hydraulic, pneumatic or mechanical equipment, or
from 84 Series point machine
Short-Form Catalogue
Issue 26.0
21
2
2.5
22
POINTS
Bearers
RELAYS
3. Relays
Relays not listed below are available to special order. Please discuss your requirements
with our sales staff.
General information.
3.1
Short-Form Catalogue
Issue 26.0
23
3
3.2
RELAYS
Neutral AC-Immune Line Relays
3.2
24
3
3.3
3.3
RELAYS
3.4
Short-Form Catalogue
Issue 26.0
25
3
3.5
RELAYS
Magnetic Latched Line Relays
3.5
3.6
Track Relays
S
3.7
26
RELAYS
Short-Form Catalogue
Issue 26.0
27
3
3.8
RELAYS
Timers
3.8
Timers
Timer Style QTD1 Dual Non-Vital
Datasheet 3J-1
A non-fail-safe slow operate electronic unit. Each of the independent
electronic timers can operate several Q style relays in parallel (must have
the same nominal voltage).
3.9
Transformer-Rectifier Units
Transformer-Rectifier Style QXR1
Datasheet 3K-1
A transformer-rectifier mounted in a Q relay housing designed to operate
a 50 Vdc relay from a 110 Vac 50 Hz line with immunity to false operation
due to dc or line capacitance up to 1 F.
28
3
3.10
RELAYS
Special-Purpose Units
3.11 AC Relays
Relay Style QNHX1 Interface to WESTLOCK and SSI
Datasheet 3N-1
An ac line relay that complies with BR Specification 966, Appendix F7. The
relay is not dc immune.
Short-Form Catalogue
Issue 26.0
29
RELAYS
3.12
30
TRAIN DETECTION
5. Train Detection
5.1
Short-Form Catalogue
Issue 26.0
31
5
5.2
TRAIN DETECTION
Track Feed Sets
5.2
5.3
Impedance Bonds
High Current Impedance Bonds
Datasheet 5C-5
Designed to carry very high track currentsup to 4000 amps per rail for
short duration. Models suit 50 Hz, jointless (1700 - 2600 Hz) and high
voltage impulse tracks
32
TRAIN DETECTION
5.4 Accessories
5.4
Accessories
Style TD4 Track Disconnection Box
Datasheet 5D-1
A robust aluminium alloy die-cast box and cover to accommodate the
transition and termination of track cables.
Cable entry through hollow mast or through glands fitted in the base of
the box.
5.5
5.6
Short-Form Catalogue
Issue 26.0
33
5
5.7
TRAIN DETECTION
Axle Counters
5.7
Axle Counters
Clearguard ACM200 Axle Counting System
Datasheet A19100-V100-B927-V1-7600
Smart track vacancy detection for cost-effective operations. Comprising
maintenance-free modules, programmed via an ID plug and combined
with an Ethernet bus and Clearguard ZP 43 E/V and ZP D 43 counting
heads into a fail-safe axle counting system.
34
TRAINSTOPS
6. Trainstops
6.1
Short-Form Catalogue
Issue 26.0
35
6
6.1
36
TRAINSTOPS
Trainstops (Trip Type)
9
Sigmaguard LED Barrier Arm Lights
Datasheet 9A-4
A fully-sealed light for installation on level crossing barrier arm.
Each unit is supplied with a cable that connects to the barrier-mounted
junction box, or as a combined double-sided light and junction box.
The lights do not require voltage-setting resistors but will work with them
in retrofit applications.
Short-Form Catalogue
Issue 26.0
37
9
9.2
9.2
Barrier Mechanisms
Wayguard Circuit Controller and Motor Retrofit Kits
Datasheet 9B-5
These retrofit kits are based on parts from the Style EB barrier mechanism.
They contain modern circuit controllers and motor to extend the life of
older style WRRS barrier mechanisms.
...NEW
Datasheet 9B-9
Cost competitive upgrade of an S-20 or S-40 barrier mechanism to S-60
functionality and features (see above).
38
9.3
Barrier
Barrier
Wayguard Level Crossing Barrier Arms
Datasheet 9C-2
Barrier arms for any situation:
all-aluminium, aluminium-fibreglass or all-fibreglass
lengths up to 12 metres (40 feet), longer by special design
telescoping design for maximum strength and minimum wind
resistance
modular construction for easy assembly and replacement
red and white reflective finish on both sides
LED or incandescent arm lamps easily fitted, or arms supplied with
lamps fitted
high-wind (eg 150 kmh) arms, masts, supports and fittings available
optional insulated tips
AREMA-compliant
...NEW
Datasheet 9C-4
Barrier arms:
ready to install at the required length
pre-fitted with low maintenance LED lights (to AS1742.7 or as required)
and markings
wiring with plug-in design
all-aluminium, aluminium-fibreglass, or all-fibreglass; includes highwind resistant variants
lengths up to 12.7 m
9.4
Warning Bells
Wayguard Level Crossing BellSolid State
Datasheet 9D-4
This solid-state bell sounds exactly like a real bell, yet has no mechanical
parts to break or wear out. It cannot be affected by dirt, water or wear, and
never requires adjustment.
The bell fully integrates with SEAR II crossing monitors for direct reporting
of bell energisation and sound level (using an inbuilt microphone) over
the bell control wires.
Short-Form Catalogue
Issue 26.0
39
9
9.5
9.5
...NEW
Reliably detect the motion of an approaching train and start the crossing
warning system.
Configurable as a basic motion sensor type or grade crossing predictor
type controller
Available as a redundant or non-redundant, single track controller.
Uses proven GCP 4000 modules
Simple user interface to easily program and set up the unit
Provides diagnostic history & train move history logs; can interface to a
SEAR II Recorder/Analyzer for additional recording capability.
40
Short-Form Catalogue
Issue 26.0
41
9
9.6
9.6
Installations
Crossing in a Box
Datasheet 9H-1
Pre-wired, pre-tested, comprehensive kit of parts and installation
locations, standardised to local Rail requirements. Packed into lockable
container so they can be removed in order of installation. Radically cuts
time on site to install and test crossing and delivers lower total installed
costs.
42
10
Computer-Based Interlockings
Interlocking Systems
Datasheet 10A-33
Design optimum interlocking system from inter-operational WESTLOCK
and WESTRACE Components. Use WESTLOCK with SSI style data and
WESTRACE with ladder logic data or combine the two.
Integrated family of interlockings
Very high data capacity eliminates cross boundary data
Fast response times
Suits both distributed and centralised architectures
High availability just where you need it
ERTMS & ETCS compatible
Industry-standard communication
Design and service tools slash costs
Hot-swap maintanable
No fleeting outputs
SSI or ladder logic
Re-use current interlocking data
WESTRACE
interlockings
WESTRACE
object controllers
Short-Form Catalogue
Issue 26.0
43
10
10
10.1
Controlguide MoviolaW
Datasheet 10A-31
A PC-based graphic display and recording, logging and replay tool that
supports WESTRACE, SSI and relay interlockings (via WESTRONIC S2).
Users can see, in real time, the state of one or more interlockings and
object controllers on a familiar mimic panel screen. MoviolaW displays
track circuits, points, signals and other equipment for easy understanding
of the their status.
Easy-to-read system fault messages
High capacity logging of all system events
Graphical replay of logged data
Remote access via modem or WAN
User-configurable event counting and reporting
Capable of displaying multiple interlockings on a single interface
User-configurable track layouts with the optional PC Graphics Editor
(PCGE)
Trackguard WESTLOCK
Datasheet 10A-9
A 4th generation computer-based interlocking that is the natural successor
to SSI that does not expose rail infra-structure owners to unnecessary
write-offs with existing SSI assets.
WESTLOCK features:
central interlocking processorsexecute dual diverse logic using triple
modular redundant hardware architecture and dual diverse software
trackside modulesprovide the interface between the Central
Interlocking Processors and the trackside equipment
configuration toolsbased on NT, these tools configure WESTLOCK
installations and enable operation simulations
diagnostic toolsincluding technicians workstation, remote
diagnostics, event recording and playback
44
10
Telemetry Systems
S2/SCN41
Enhanced
scanner
module
Datasheet 10B-4
S2/SCN42
Standard
scanner
module
Short-Form Catalogue
Issue 26.0
45
10
10
10.2
46
10
Telemetry Systems
HD/Link System
Datasheets 10B-15 and 10B-27
A vital telemetry system that can operate over a local network, use spread
spectrum radio or other bearers. Ideal for pole line replacement, cable
elimination, or vital timer applications.
Short-Form Catalogue
Issue 26.0
47
10
10
10.3
Train
Graph
ARS Operators
Interface (AOI)
Datasheet 10C-7
Rail 9000 is a single Control Centre that consists of a set of central servers
and multiple Signaller workstations (clients). Each Signaller:
can always see all of the railway;
can control any number of zones within the railway
can assign, remove or query zones
Signallers use Rail 9000s mouse or keyboard to create and send commands
to interlockings, and receive feedback from the interlocking on their multimonitor display.
Controlguide WESTCAD
Datasheet 10C-2
A PC-based control and display system that provides a flexible, costeffective alternative to hard-wired panels.
Supports multiple monitors and can control most local and remote
interlockings.
48
10
10.4
Trainguard ETCS
...NEW
Datasheet A19100-V100-B875-V3-7600
ETCS is the basis for interoperability between on-board and trackside
equipment from any supplier. Provides signal aspect and line profile,
including line speed & speed restrictions, to the driver; on-board system
applies brakes, if necessary.
Siemens provides a complete, integrated portfolio of products conforming
to ETCS specifications, including:
ETCS Level 1
Trainguard 100 on-board equipment for ETCS Level 1
Trainguard Eurobalise S21 and S22 for track to train communications
Trainguard Lineside Electronics Unit (LEU)S2 to link signals with
Euroblaises and Euroloop
Trainguard Euroloop S21 F to complement Eurobalises for shorter
headways
Trainguard Basic Indusi for migrating Indusi/PZB 90 into ETCS
ETCS Level 2
Trainguard 200 on-board equipment for ETCS Level 2
Trainguard Radio Block Centre
Control Centre
iVIU trackside
Vital Interface Unit
iVIU
Universal Track
Module
Train Sentinel
onboard display
and control
Move beyond paper-based train order and track warrant systems with Train
Sentinel delivering non-conflicting electronic train orders with protection
against exceeding these authorities.
Faster, more efficient and safer than manual systems
Mimic and train graph based authority generation
Points controlled, locked and detected via data circuits
Authority exchange via data radio (with optional voice confirmation)
Driver has written and graphical authority
Prevents exceeding movement and speed authority
Automated authority rollup after train
Easy and small to retrofit
Retrofit to dark and CTC territory
10
Short-Form Catalogue
Issue 26.0
49
10
10.5
50
10
10.5
10
Short-Form Catalogue
Issue 26.0
51
10
10.5
52
10
10.6
10
Short-Form Catalogue
Issue 26.0
53
10
10.7
Condition Monitoring
Datasheet 10H-6
Struktons POSS condition monitoring system widely used throughout
Europe is now available from and supported by Siemens
Train Describer
Voice
FIRE Control
TRACTION
ELECTRICAL
MECHANICAL
SECURITY
RailSCADA
SystematICS Platform
54
11
11.1
ACCESSORIES
Terminal Blocks
11. Accessories
11.1 Terminal Blocks
RSA Double-Row Terminal Blocks
Datasheet 11A-1
A range of M5 and M6 terminal blocks (complete with nuts and washers),
shorting links and insulating links.
Available from 1 to 6 way (2 to 12 studs).
Surge Arresters
Datasheet 11D-1
Every WESTRACE input and output connected external to the SER or
location case should be protected from the impact of transient voltages.
These WESTRACE specific surge arresters protect against common or
differential mode transients.
Fulfils WESTRACE Safety Requirements
50 Vdc and 110 Vac inputs
Repeatable protection up to 10 kA
Complies with relevant functional and safety standards
Visual indication of input or output state via LED
Visual indication of unit health via LED when ON
Separate base and surge protection module; colour coded base to
prevent incorrect module insertion
Available for 35 mm T or 32 mm G DIN rail
Earth connection via rail or separate terminals
Isolates WESTRACE on excessive fault current
Short-Form Catalogue
Issue 26.0
55
11
11
11.2
ACCESSORIES
Lightning and Surge Arresters
56
11
ACCESSORIES
11.3
Resistors
11.3 Resistors
Sealed Resistors
Datasheet Sj-01-01
Made with alloy resistance wire wound on a porcelain core to which
stainless steel lugs are attached. The assembly is embedded in insulating
ceramic cement and a steel casing which is sealed with a high grade
insulating paint.
Can be used as heating units within some equipment to prevent frost
accumulation at vital points such as commutators to contacts.
All units are 100% tested for resistance and each unit is guaranteed to
have a nominal value not less than the rated value. Units are noted in
AREMA wattage specified in Manual Part 135. Maximum rise of hottest
temperature part of resistor body is 147C above ambient.
11.4 Tools
Insulated Terminal Wrenches
Datasheet 11F-1
For BSW, M6, 2 BA, M5 railways signal terminal nuts. Zinc plated
steel body embedded in a moulded plastic handle.
Short-Form Catalogue
Issue 26.0
57
11
11
11.4
ACCESSORIES
Tools
...Improved
Datasheet 11F-5
Locate track circuit shorts quickly with this easy-to-use meter and purposedesigned probes.
Can also be used:
to locate high resistance bonds and track connections, noisy air gap
arrestors etc
as an insulated joint tester
for local ballast condition measurements
12
58
13
SERVICES
13.1
Training
13. Services
13.1 Training
Railway Signalling Training
Datasheet 13A-1
Use our Training Department for cost-effective professional training.
Choose from over 120 courses to meet your organisations needs.
Short-Form Catalogue
Issue 26.0
59
13
13
13.3
SERVICES
Refurbishments and Design
Electro-mechanical Refurbishment
Datasheet 13B-1
Return your worn-out equipment to Invensys Rail for partial or complete
refurbishment.
Point Layouts
Datasheet 13B-3
We have over 250 standard, proven and approved designs on file for just
about every point machine whether pneumatic, hydraulic or electromechanicaland every point layout. We have design approval with all
major Australian and some overseas Railways. Standard designs are all
field proven. So chances are we have your solution already.
Save valuable time and reduce risks by using installation kits from the
point experts. One order provides everything needed for an installation so
you dont have to manage design, ordering, order chasing, kitting etc.
60
T
F
E
W