Académique Documents
Professionnel Documents
Culture Documents
_______________Ordering Information
PART
MAX3263CAG
TEMP. RANGE
0C to +70C
PIN-PACKAGE
24 SSOP
________________________Applications
Laser Diode Transmitters
155Mbps SDH/SONET
155Mbps ATM
___________________Pin Configuration
+5V
0.01F
+5V
0.01F
+5V
VCCA VCCB
TOP VIEW
VREF2 1
24 SLWSTRT
IPINSET 2
23 IPIN
FAILOUT 3
22 VCCA
GNDB 4
21 GNDA
VIN+ 5
MAX3263
VIN+
VIN-
PHOTODIODE
GNDA
GNDB
19 GNDA
GNDB 7
18 OUT-
VCCB
17 GNDA
LASER
IPIN
MAX3263
ENB+
20 OUT+
VIN- 6
PECL
INPUTS
OUT+
FERRITE BEAD
IBIASOUT
+5V
ENB-
OUT-
SLWSTRT
2.7k
FAILOUT
IBIASFB
ENB- 9
16 IBIASOUT
VREF1
ENB+ 10
15 IMODSET
VREF1 11
14 IBIASSET
VREF2
IBIASSET
IMODSET
OSADJ
IPINSET
OSADJ 12
13 IBIASFB
SSOP
________________________________________________________________ Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxims website at www.maxim-ic.com.
MAX3263
________________General Description
MAX3263
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
DC ELECTRICAL CHARACTERISTICS
(VCC = VCCA = VCCB = +4.75V to +5.25V, TA = 0C to +70C, unless otherwise noted. Typical values are at VCC = +5V and
TA = +25C.)
PARAMETER
SYMBOL
IBIAS
Reference Voltage
VREF
IREF
Supply Current
IVCC
VIH
CONDITIONS
TA = +25C
MIN
TYP
3.15
3.3
MAX
UNITS
60
mA
3.55
12
mA
(Note 1)
50
VCC - 1.165
VIL
VIH
VIL
VOH
VOL
mA
V
VCC - 1.475
2
0.8
V
V
V
4.5
V
0.5
Note 1: IVCC = IVCCA + IVCCB, IBIAS = 60mA, IMOD = 30mA, and IPIN = 140A.
AC ELECTRICAL CHARACTERISTICS
(VCC = VCCA = VCCB = +4.75V to +5.25V, RLOAD (at OUT+ and OUT-) = 25 connected to VCC, TA = 0C to +70C, unless otherwise noted. Typical values are at VCC = +5V and TA = +25C.) (Note 2)
SYMBOL
CONDITIONS
MAX
UNITS
Range of Programmable
Modulation Current
PARAMETER
IMOD
30
mA
tR, tF
ns
OS
PWD
MIN
TYP
15
_______________________________________________________________________________________
%
100
ps
10
100,000
5
4
3
RPINSET ()
RMODSET (k)
10,000
1000
2
0
20
100
60
40
IBIAS (mA)
20
25
30
500
1000
SUPPLY CURRENT
vs. TEMPERATURE
APC DISABLED
50
48
4
2
0
-2
-4
-6
-1
46
44
42
40
38
36
-8
-10
-2
0
20
60
40
80
34
0
TEMPERATURE (C)
10
20
30
40
50
60
70
80
20
8
6
ALLOWABLE
RANGE
40
MAXIMUM MODULATION CURRENT (mAp-p)
10
60
40
80
TEMPERATURE (C)
12
TEMPERATURE (C)
15
MAX3263-04
10
10
MAX3263-05
MAX3263-06
1
0
MAX3263-08
RBIASSET (k)
MAX3263-03
MAX3263-02
12
MAX3263-01
RMODSET = 1.2k
ROSADJ = 2k
35
30
25
20
15
10
5
0
0
0
10
15
20
25
30
400
800
1200
1600
2000
MINIMUM DIFFERENTIAL
INPUT SIGNAL AMPLITUDE (mVp-p)
_______________________________________________________________________________________
MAX3263
MAX3263
PIN
NAME
FUNCTION
VREF2
IPINSET
FAILOUT
4, 7
GNDB
VIN+
VIN-
VCCB
+5V Supply Voltage for Voltage Reference and Automatic Power-Control Circuitry. Connect
VCCB to the same potential as VCCA, but provide separate bypassing for VCCA and VCCB.
ENB-
Inverting Enable TTL Input. Output currents are enabled only when ENB+ is high and ENB- is low.
10
ENB+
Noninverting Enable TTL Input. Output currents are enabled only when ENB+ is high and
ENB- is low.
11
VREF1
12
OSADJ
Overshoot-Adjust Input. Connect to internal voltage reference through a resistor to adjust the
overshoot of the modulation output signal (see Typical Operating Characteristics).
13
IBIASFB
14
IBIASSET
Laser Bias Current-Programming Input. Connect to internal voltage reference through a resistor to set bias current (see Typical Operating Characteristics).
IBIASOUT = 40 x (IBIASSET + IBIASFB).
15
IMODSET
16
IBIASOUT
Laser Bias Current Output. Connect to laser cathode through an R-L filter network (see the
Bias Network Compensation section).
17, 19, 21
GNDA
18
OUT-
Modulation Output. When VIN+ is high and VIN- is low, OUT- sinks IMOD.
20
OUT+
Modulation Output. When VIN+ is low and VIN- is high, OUT+ sinks IMOD.
22
VCCA
+5V Supply Voltage for Bias and Modulation Current Drivers. Connect VCCA to the same
potential as VCCB, but provide separate bypassing for VCCA and VCCB.
23
IPIN
24
SLWSTRT
_______________________________________________________________________________________
VCC
OUT+
MAX3263
VIN+
LASER
VINOUT-
VCCA
PHOTODIODE
VCCB
20 x IMODSET
IBIASOUT
GNDA
GNDB
+2.6V
40 x IBIASSET
ENB+
ENB-
BIAS
COMPENSATION
FAILOUT
COMPARATOR
MAIN
BIAS
GENERATOR
IPIN
LOOPSTABILITY
CAPACITOR
0.1F
VCC x 3/5
SLWSTRT
TRANSCONDUCTANCE
AMPLIFIER
IBIASFB
IBIASSET
IMODSET
IOSADJ
1 x IPINSET
IPINSET
RBIASSET
RMODSET
RPINSET
ROSADJ
VREF1, VREF2
BANDGAP
REFERENCE
_______________Detailed Description
The MAX3263 laser driver has three main sections: a
reference generator with temperature compensation, a
laser bias block with automatic power control, and a
modulation driver (Figure 1).
The reference generator provides temperature-compensated biasing and a voltage-reference output. The
voltage reference is used to program the current levels
of the high-speed modulation driver, laser diode, and
PIN (p+, intrinsic, n-) monitor diode.
The laser bias block sets the bias current in the laser
diode and maintains it above the threshold current. A
current-controlled current source (current mirror) programs the bias, with IBIASSET as the input. The mirrors
gain is approximately 40 over the MAX3263s input
range. Keep the output voltage of the bias stage above
2.2V to prevent saturation.
The modulation driver consists of a high-speed input
buffer and a common-emitter differential output stage.
The modulation current mirror sets the laser modulation
current in the output stage. This current is switched
between the OUT+ and OUT- ports of the laser driver.
The modulation current mirror has a gain of approximately
20. Keep the voltages at OUT+ and OUT- above 2.2V to
prevent saturation.
_______________________________________________________________________________________
MAX3263
OUTPUTS
VCC
MAX3263
280
280
INPUTS
2(IOSADJ)
400
INPUT BUFFER
Enable Inputs
2(IOSADJ)
IMOD
OUTPUT STAGE
_______________________________________________________________________________________
ENB+
DATA OUT
(LOAD = 1300nm
LASER AT OUT-)
2s/div
ENB+
VREF
Off
On
Off
Off
The MAX3263 output currents are programmed by current mirrors. These mirrors each have a 2VBE temperature
coefficient. The reference voltage (VREF) is adjusted 2VBE
so these changes largely cancel, resulting in output currents that are very stable with respect to temperature (see
Typical Operating Characteristics).
__________________Design Procedure
Temperature Considerations
Interfacing Suggestions
Use high-frequency design techniques for the board
layout of the MAX3263 laser driver. Adding some damping resistance in series with the laser raises the load
impedance and helps reduce power consumption (see
Reducing Power Consumption section). Minimize any
series inductance to the laser, and place a bypass
capacitor as close to the lasers anode as possible.
Power connections labeled VCCA are used to supply the
laser modulation and laser bias circuits. VCCB connections supply the bias-generator and automatic-power
The IBIASOUT pin has about 4pF of parasitic capacitance. When operating at bias levels over 50mA, the
impedance of the bias output may be low enough to
decrease the rise time of the transmitter. If this occurs,
the impedance of the IBIASOUT pin can be increased by
adding a large inductor in series with the pin.
_______________________________________________________________________________________
MAX3263
control circuits. For optimum operation, isolate these supplies from each other by independent bypass filtering.
MAX3263
5V
82
82
VIN+
120
a) THEVENIN-EQUIVALENT TERMINATION
MAX3263
VIN120
NON-PECL
SIGNAL SOURCE
VIN+
5V
50
50
680
50
1.8k
MAX3263
50
VIN-
NON-PECL
SIGNAL SOURCE
VIN+
50
180
68
5V
MAX3263
5V
680
VIN1.8k
5V
ECL
SIGNAL SOURCE
0V
1.3k
1.3k
VIN+
50
d) ECL TERMINATION
3.6k
MAX3263
-2V
THIS SYMBOL REPRESENTS
A TRANSMISSION LINE
WITH CHARACTERISTIC
IMPEDANCE Zo = 50.
VIN50
3.6k
-2V
_______________________________________________________________________________________
0.1F
MAX3263
LASER
PHOTODIODE
IPIN
10H
25
SHUNT RC
IBIASOUT
FERRITE
BEAD
0.01F
AS CLOSE TO THE
LASER ANODE AS
POSSIBLE
18
AS CLOSE TO THE
LASER CATHODE AS
POSSIBLE
OUT-
_____________Applications Information
Programming the MAX3263 Laser Driver
Programming the MAX3263 is best explained by an
example. Assume the following laser diode characteristics:
Wavelength
1300nm
Threshold Current
ITH
20mA at +25C(+0.35mA/
C temperature variation)
Monitor Responsivity mon 0.1A/W (monitor current /
average optical power
into the fiber)
Modulation Efficiency
0.1mW/mA (worst case)
Now assume the communications system has the following requirements:
PAVE
Er
Tr
0dBm (1mW)
6dB (Er = 4)
0C to +70C
_______________________________________________________________________________________
MAX3263
18
Average Power
Extinction Ratio
Temperature Range
+5V
______________________________________________________________________Package Information
SSOP.EPS
MAX3263
10
______________________________________________________________________________________
NOTES
______________________________________________________________________________________
11
NOTES
Maxim makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Maxim assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential
or incidental damages. Typical parameters can and do vary in different applications. All operating parameters, including typicals must be validated for
each customer application by customers technical experts. Maxim products are not designed, intended or authorized for use as components in systems
intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the
Maxim product could create a situation where personal injury of death may occur.
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
12 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
2001 Maxim Integrated Products
Printed USA