Académique Documents
Professionnel Documents
Culture Documents
What is the minimum number of bits required to encode the decimal digits 0 through
9? Justify your answer.
2.
3.
4.
5.
6.
7.
8.
9.
16.
systems.
Find the hexadecimal equivalent of the binary number (10001101011.11110)2
What are the methods used to represent negative numbers in digital systems?
Which codes are called as self complementing code?
Convert the hexadecimal number (A72E)16 into octal number.
Define sign-magnitude representation of numbers.
Which is the most commonly used code for representing alphanumeric information?
What is meant by register?
17.
10.
11.
12.
13.
14.
15.
18.
19.
20.
algebra
1. Simplify the Boolean function.
(i)F(x,y,z) = (3,4,6,7) (ii)F(x,y,z) = (0,2,4,5,6)
(iii)F(x,y,z) = (0,1,2,4,5,6,8,9,12,13,14)
2. a).Convert the following binary numbers into gray code: i) 011010111101, ii)
111010101110 iii) 0110100010101
b).Write the following numbers in excess-3 code: i) 28, ii) 396 iii) 403
3. Explain the logic gates with neat diagram.
4. (a)Implement the Boolean function with NAND gates F=AB+CD+E
(b)Prove that NOR gate is an universal gate. Also, prove the same for NAND gate.
5. Draw the 2 level OR AND Network F = (C+D) (A' +B C) ( C' +D') ( A+B+ C' )
6. Simplify the logic function of using the Quine Mc cluskey minimization technique
Y=(A,B,C,D)= m(0,1,3,7,8,9,11,15)
8.a) Find the 9s and the 10s complement of the following decimal number:
i) 98127634 ii) 72049900
b) Obtain the 1s and 2s complement of the following binary numbers :i) (11101010)
ii)(01101110)
9. Simplify the given function by using K- map technique and draw the equivalent
diagram for the output function by using logic gates.
i) F(A,B,C,D) = m(0,1,2,4,5,6,8,9,12,13,14)
ii) F (A,B,C,D) = BC' D+ A'BCD + B'CD' + A'B'C'D' + AC'D
10. Convert the following numbers with the indicated bases to decimal number
(4310)5 , (198)12
i)
(10110.0101)2 ,(16.5)16 and (26.24)8
ii)
With logic circuit & truth table explain the operation of JK flip flop.
Explain in detail about T & D flip flops.
Discuss about the State minimization and state assignment in detail.
Using JK flip flops, design a synchronous counter which counts in the
sequence,000,001,010,011,100,101,110,111,000
5. Draw and explain the operation of a 4-bit SISO, SIPO, PIPO and PISO shift register.
6. Design and explain the working of a 4-bit ripple counter with a neat diagram.
7. a) With a suitable diagram, explain the operation of SR flip-flop in detail.
b) Write the procedure for designing synchronous sequential circuit.
8. Design a 3 bit binary UP/DOWN counter with a direction control M. Use JK FlipFlops.
9. Write the HDL behavioural and structural description of universal shift register in
detail.
10. Discuss in detail about the clocked sequential circuit design and analyze with suitable
example.