Académique Documents
Professionnel Documents
Culture Documents
Training Catalog
Industry Automation/ Drive Technologies
INDONESIA
iadtproduct.id@siemens.com
Arcadia Office Park, Tower F Level 18 Jalan T.B. Simatupang Kav. 88 Pasar Minggu, Jakarta 12520
Phone : +62 (021) 2754 3447 Direct: +62 (021) 2754 3167 Fax: +62 (021) 2754 3481
Email
: Achmad.Firdaus@Siemens.com
Website : www.siemens.co.id
SITRAIN
Industry Automation and Drive Technologies
Introduction
The successful utilization of new technologies as applied to modern industrial processes requires updated
knowledge about operation, functions and maintenance for both the manufacturer and the user.
To help existing plant personnel work effectively with the industrial electronics and control systems, it would be
necessary to upgrade their knowledge and skills through a series of specialized training courses.
The structured training courses have been designed to suit individual knowledge levels and experiences, by
adapting the selective learning path concept. You can thus choose a specific section or all sections of a particular
course.
All courses are conducted by senior commissioning engineers who have extensive theoretical and practical
experience.
Catalog Information
The catalog contains the overview of courses available. These are also offered subject to demand. In this case
please contact us if the course in which you are interested is not yet scheduled.
On customers request some courses can be held at the factory site (On-site Training).
The communication language in the activity is Bahasa Indonesia. For the reason of precise description we
prepared the course documents in English.
If the date of commencement of a course does not match your schedule, we are prepared to respond flexibility to
your demands.
Arcadia Office Park, Tower F Level 18 Jalan T.B. Simatupang Kav. 88 Pasar Minggu, Jakarta 12520
Phone : +62 (021) 2754 3447 Direct: +62 (021) 2754 3167 Fax: +62 (021) 2754 3481
Email
: Achmad.Firdaus@Siemens.com
Website : www.siemens.co.id
SITRAIN
Industry Automation and Drive Technologies
SYSTEM COURSE
(ST-TIA P1)
Course locations : Jakarta
3 Days
Target audience
This course is aimed at personnel in all areas, who are interested in any of the following, but have no knowledge
of SIMATIC S7-1200 programmable controller:
Pre-requisite knowledge
This is an entry level course that requires knowledge of logic control technology and Windows.
Course objectives
On completion of this course, the participant shall be able to:
Know the components part and principle of operation of a SIMATIC S71200 programmable Controller and
the rules governing handling of the hardware and programming of a SIMATIC S71200.
Use STEP 7 Basic Tools for generation, documentation, testing program and error detection.
Make and start up simple program for control task with S71200 Programmable controller and KTP Basic
Panel.
Working with symbol list.
Working with program blocks
Data Management with Data Blocks.
Saving & documenting programs.
Course contents
Introduction to SIMATIC S71200 systems: Hardware systems components, and configuration.
STEP 7 BASIC Software: Software feature, functionality, Installing, and generate and back up program PLC SIMATIC S7
1200.
Basic, Standard and Special operations of SIMATIC S71200 Programmable controller.
SIMATIC S71200 Programmable controller communicates with KTP Basic Panel.
Note: All topics are back up by practical exercises using the Field PG / PC programmer and the S7-1200
programmable controllers.
Arcadia Office Park, Tower F Level 18 Jalan T.B. Simatupang Kav. 88 Pasar Minggu, Jakarta 12520
Phone : +62 (021) 2754 3447 Direct: +62 (021) 2754 3167 Fax: +62 (021) 2754 3481
Email
: Achmad.Firdaus@Siemens.com
Website : www.siemens.co.id
SITRAIN
Industry Automation and Drive Technologies
SYSTEM COURSE
(ST-MICRO1)
Course locations : Jakarta
3 Days
Target audience
This course is aimed at personnel in all areas, who are interested in any of the following, but have no knowledge
of SIMATIC S7-200 programmable controller:
Pre-requisite knowledge
This is an entry level course that requires knowledge of logic control technology and Windows.
Course objectives
On completion of this course, the participant shall be able to:
Know the components part and principle of operation of a SIMATIC S7200 programmable Controller and
the rules governing handling of the hardware and programming of a SIMATIC S7200.
Use STEP 7 Microwin Tools for generation, documentation, testing program and error detection.
Make and start up simple program for control task with S7200 Programmable controller and Text Display
TD200.
Number system, data types and memory areas.
Course contents
Note: All topics are back up by practical exercises using the Field PG / PC programmer and the S7-1200 Note: All
topics are backup by practical exercises using the Field PG / PC programmer and the S7-200 programmable
controllers.
Arcadia Office Park, Tower F Level 18 Jalan T.B. Simatupang Kav. 88 Pasar Minggu, Jakarta 12520
Phone : +62 (021) 2754 3447 Direct: +62 (021) 2754 3167 Fax: +62 (021) 2754 3481
Email
: Achmad.Firdaus@Siemens.com
Website : www.siemens.co.id
SITRAIN
Industry Automation and Drive Technologies
5 Days
Target audience
This course is aimed at personnel in all areas, who are interested in any of the following, but have no knowledge
of SIMATIC S7 programmable controller:
Pre-requisite knowledge
This is an entry level course that requires knowledge of logic control technology and windows. Knowledge in
SIMATIC S5 and Windows system are advantage.
Course objectives
On completion of this course, the participant shall be able to:
Know the components parts and the principle of operation of a SIMATIC S7 programmable controller and
the rules governing handling of the hardware and basic programming of a SIMATIC S7.
Be able to use STEP 7 tools for documenting and testing the programs.
Course contents
Familiarization with the performance with the performance characteristic of PLC and programming devices.
Configuring the CPU and the I/O modules by Hardware Configuration.
Ability to structure, generate, document and put into operation simple PLC program with SIMATIC S7.
Be acquainted with structure and execution of programs in SIMATIC S7 programmable controllers.
Ability to use the STEP 7 tools for generating, documenting, use absolute / symbolic addressing and testing
the programs.
Note: All topics are backup by practical exercises using the Field PG/ PC and the S7-300/400 programmable
controllers and plant model.
Arcadia Office Park, Tower F Level 18 Jalan T.B. Simatupang Kav. 88 Pasar Minggu, Jakarta 12520
Phone : +62 (021) 2754 3447 Direct: +62 (021) 2754 3167 Fax: +62 (021) 2754 3481
Email
: Achmad.Firdaus@Siemens.com
Website : www.siemens.co.id
SITRAIN
Industry Automation and Drive Technologies
5 Days
Target audience
This course is aimed at qualified operating, service, and assembly personnel. Knowledge and skills acquired in
course.
SIMATIC S7 Application Course are consolidated and extended to enable the participants to recognize and
remedy faults / errors in SIMATIC S7 controllers, and to participate in startup procedures.
Pre-requisite knowledge
Participate in SIMATIC S7 Basic Programming Course.
Course objectives
On completion of this course, the participant shall be able to:
Understand the program structure of the high performance of SIMATIC S7 controller and know all function of
the STEP 7.
Be able to use STEP 7 tools for Diagnostic & Troubleshooting of Faults on the PLC system.
Be able to program and using configurable blocks, to use analog processing, extended instructions,
extended function of symbolic programming, interrupt processing and communication links via MPI interface.
Be able to convert STEP 5 to STEP 7 programs.
Course contents
Note: All topics are backup by practical exercises using the Field PG/ PC and the S7-300/400 programmable
controllers and plant model.
Arcadia Office Park, Tower F Level 18 Jalan T.B. Simatupang Kav. 88 Pasar Minggu, Jakarta 12520
Phone : +62 (021) 2754 3447 Direct: +62 (021) 2754 3167 Fax: +62 (021) 2754 3481
Email
: Achmad.Firdaus@Siemens.com
Website : www.siemens.co.id
SITRAIN
Industry Automation and Drive Technologies
3 Days
Target audience
This course is aimed at planning design, application and service engineers who work on ETHERNET and
PROFIBUS Network communication between PLC S7 with CP343/ CP443.
Pre-requisite knowledge
Knowledge of SIMATIC S7 and basic communication concepts.
Course objectives
On completion of this course, the participant shall be able to:
Be familiar with design and structure of the ETHERNET/ PROFIBUS network and system.
Be able to connect different automation equipment to the ETHERNET/PROFIBUS network.
Be able to parameterize using S7-NETPRO and the CP343 / CP443 module and program a PLC-PLC
connection using TCP/IP and FDL or FMS mode.
Be able to use the test and diagnostic functions for ETHERNET / PROFIBUS Network.
Course contents
General concept of ETHERNET / PROFIBUS and standard Application possibilities of FDL and FMS.
Using the S7-NETPRO for ETHERNET / PROFIBUS Application to parameterize the TCP/IP and FDL / FMS
connections.
The data transfer between CPU and CP343 / CP443 via the programming of SendReceive block and Load
/ Transfer commands.
The Test and diagnostics function to analyze the ETHERNET and PROFIBUS Communication.
Note : All topics are backup by practical exercises using the Field PG/ PC and the S7-300/400 programmable
controllers and plant model.
Arcadia Office Park, Tower F Level 18 Jalan T.B. Simatupang Kav. 88 Pasar Minggu, Jakarta 12520
Phone : +62 (021) 2754 3447 Direct: +62 (021) 2754 3167 Fax: +62 (021) 2754 3481
Email
: Achmad.Firdaus@Siemens.com
Website : www.siemens.co.id
SITRAIN
Industry Automation and Drive Technologies
PROFIBUS-DP Network
With ET200 series and Field
Devices
(S7-PROFI DP)
Course locations : Jakarta
2 Days
Target audience
This course is aimed at planning design, application and service engineers who work on PROFIBUS-DP Network
communication between PLC S7 with Integrated DP-Master of CPU 315-2DP / CPU 414-2DP or CP342-5.
Pre-requisite knowledge
Knowledge of SIMATIC S7 and basic communication concepts
Course objectives
On completion of this course, the participant shall be able to:
Be familiar with design and structure of the PROFIBUS DP network and system.
Be able to parameterize PROFIBUS-DP using Hardware Configuration and make a program on SIMATIC S7.
Be able to connect different automation equipment to the PROFIBUS-DP network.
Be able to use the test and diagnostic functions for DP Master and Slaves.
Course contents
Note : All topics are backup by practical exercises using the Field PG/ PC and the S7-300/400 programmable
controllers and plant model.
Arcadia Office Park, Tower F Level 18 Jalan T.B. Simatupang Kav. 88 Pasar Minggu, Jakarta 12520
Phone : +62 (021) 2754 3447 Direct: +62 (021) 2754 3167 Fax: +62 (021) 2754 3481
Email
: Achmad.Firdaus@Siemens.com
Website : www.siemens.co.id
SITRAIN
Industry Automation and Drive Technologies
SYSTEM COURSE
(ST-WCCFSYS1)
Course locations : Jakarta
5 Days
Target audience
This course is for personnel who want to work with WinCC Flexible for process visualization system, monitoring
and controlling anything from individual machine to large installation and who want to consolidate and extend their
knowledge on WinCC Flexible.
Pre-requisite knowledge
Sound knowledge of SIMATIC S5/S7 Basic, Maintenance and Trouble Shooting Course, PROFIBUS or Industrial
Ethernet Network and Windows 2000/XP environment.
Course objectives
On completion of this course, the participant shall be able to:
Be capable of programming WinCC Flexible for operator-process visualization with fully graphical, object
oriented user interface with windowing techniques.
Be able to set up the bus connection with PROFIBUS or Industrial Ethernet.
Be able to connect to SIMATIC configuration world (signal list, programming device functions).
Course contents
Arcadia Office Park, Tower F Level 18 Jalan T.B. Simatupang Kav. 88 Pasar Minggu, Jakarta 12520
Phone : +62 (021) 2754 3447 Direct: +62 (021) 2754 3167 Fax: +62 (021) 2754 3481
Email
: Achmad.Firdaus@Siemens.com
Website : www.siemens.co.id
SITRAIN
Industry Automation and Drive Technologies
SYSTEM COURSE
(ST-BWCCS)
Course locations : Jakarta
5 Days
Target audience
This course is intended for configuring engineers, commissioning engineers, decision-makers and service
personnel, or for personnel who want to work with WinCC for process visualization system, monitoring and
controlling a process machine.
Pre-requisite knowledge
Sound knowledge of SIMATIC S5/S7 Basic, Maintenance and Trouble Shooting Course, PROFIBUS or Industrial
Ethernet Network and Windows 2000/XP environment.
Course objectives
On completion of this course, the participant shall be able to:
Course contents
Arcadia Office Park, Tower F Level 18 Jalan T.B. Simatupang Kav. 88 Pasar Minggu, Jakarta 12520
Phone : +62 (021) 2754 3447 Direct: +62 (021) 2754 3167 Fax: +62 (021) 2754 3481
Email
: Achmad.Firdaus@Siemens.com
Website : www.siemens.co.id
SITRAIN
Industry Automation and Drive Technologies
SIEMENS DCS
SIMATIC PCS7 V7
(ST-PCS7SYS)
Course locations : Jakarta
5 Days
Target audience
Intended for configuring engineers/programmers, commissioning personnel, and operation personnel.
Pre-requisite knowledge
Basic knowledge of automation system and PLC S7 programming.
Course objectives
As a user of the Process Control System SIMATIC PCS7, the participant learns how to apply the engineering
features in a structured and efficient way. Supported by examples and exercises, the process automation of a
plant is realized up to the HMI level. Covered are aspects of SIMATIC PCS7, such as its system wide
consistency, plant oriented, data and project management and the co-operation between the various components
and tools.
Course contents
System overview and architecture : subsystems for automation, operation, communication and engineering.
Configuring concept : from the field level up to the HMI level with integrated WinCC system.
Network and hardware configuration.
Process Object View as a plant based structure of the project.
Standardizing by library and block concept, Process tag types, Model.
Automation solutions by graphical configuration with CFC and SFC.
Monitoring and controlling.
Distributed engineering (Multi Project).
Arcadia Office Park, Tower F Level 18 Jalan T.B. Simatupang Kav. 88 Pasar Minggu, Jakarta 12520
Phone : +62 (021) 2754 3447 Direct: +62 (021) 2754 3167 Fax: +62 (021) 2754 3481
Email
: Achmad.Firdaus@Siemens.com
Website : www.siemens.co.id
SITRAIN
Industry Automation and Drive Technologies
DC DRIVES
SIMOREG
Series 6RA24/70 DC Drives
(DR02)
Course locations : Jakarta
5 Days
Target audience
This course is intended for: personnel of customers who will be commissioning, servicing, and maintaining the
SIMOREG series 6RA24/6RA70.
Pre-requisite knowledge
Basic knowledge of DC motors, of power devices and of control engineering.
Course objectives
On completion of the course, the participant should:
Course contents
Arcadia Office Park, Tower F Level 18 Jalan T.B. Simatupang Kav. 88 Pasar Minggu, Jakarta 12520
Phone : +62 (021) 2754 3447 Direct: +62 (021) 2754 3167 Fax: +62 (021) 2754 3481
Email
: Achmad.Firdaus@Siemens.com
Website : www.siemens.co.id
SITRAIN
Industry Automation and Drive Technologies
AC DRIVES
MICROMASTER
Series MM420/440
(MM4)
Course locations : Jakarta
3 Days
Target audience
This course is intended for: personnel of customers who will be commissioning, servicing, and maintaining the
Micromaster Siemens inverter system.
Pre-requisite knowledge
Basic knowledge of AC motors, of power devices and of control engineering.
Course objectives
On completion of the course, the participant should:
Course contents
Discussion of the modular concept of the series Micro Master 420/440 (basic units, options).
Commissioning of a unit with discussion of special functions (setting of the parameters, optimization).
Drive Monitor (operation, programming, data transfer via PC).
Diagnosis, fault finding and fault localization.
Arcadia Office Park, Tower F Level 18 Jalan T.B. Simatupang Kav. 88 Pasar Minggu, Jakarta 12520
Phone : +62 (021) 2754 3447 Direct: +62 (021) 2754 3167 Fax: +62 (021) 2754 3481
Email
: Achmad.Firdaus@Siemens.com
Website : www.siemens.co.id
SITRAIN
Industry Automation and Drive Technologies
AC DRIVES
SIMOVERT MASTER DRIVES
Series 6SE70
(D60)
Course locations : Jakarta
5 Days
Target audience
This course is intended for : technicians, engineers or maintenance personnel who must project or maintain a
SIMOVERT Master Drives System.
Pre-requisite knowledge
Basic knowledge of AC motors, of power devices and of control engineering.
Course objectives
On completion of the course, the participant should:
Course contents
Discussion of the modular concept of the series Master Drives (basic units, options).
Commissioning of a unit with discussion of special functions (setting of the parameters, optimization).
Module CUVC/Vector Control (frequency, speed, torque control).
Supplementary functions (automatic restart / generator buffering / restart on the fly / DC braking).
Modules CBP (Profibus communication to PLC).
Drive Monitor (operation, programming, data transfer via PC).
Diagnosis, fault finding and fault localization.
Arcadia Office Park, Tower F Level 18 Jalan T.B. Simatupang Kav. 88 Pasar Minggu, Jakarta 12520
Phone : +62 (021) 2754 3447 Direct: +62 (021) 2754 3167 Fax: +62 (021) 2754 3481
Email
: Achmad.Firdaus@Siemens.com
Website : www.siemens.co.id
SITRAIN
Industry Automation and Drive Technologies
SINAMICS S120/G120
Service and Commissioning
(DR SNS SI)
Course locations : Jakarta
5 Days
Target audience
This course is intended for: personnel of customers who will be commissioning, servicing, and maintaining the
SINAMICS S120 / SINAMICS G120 series.
Pre-requisite knowledge
On completion of the course, the participant should:
.
Course objectives
On completion of this course, the participant shall be able to:
Course contents
Arcadia Office Park, Tower F Level 18 Jalan T.B. Simatupang Kav. 88 Pasar Minggu, Jakarta 12520
Phone : +62 (021) 2754 3447 Direct: +62 (021) 2754 3167 Fax: +62 (021) 2754 3481
Email
: Achmad.Firdaus@Siemens.com
Website : www.siemens.co.id
SITRAIN
Industry Automation and Drive Technologies
PLC SIMATIC S5
Basic Programming Course
(S5-S02)
Course locations : Jakarta
5 Days
Target audience
This course is aimed at personnel in all areas, who are interested in any of the following, but have no knowledge
of SIMATIC S5 programmable controller
Pre-requisite knowledge
This is an entry level course that requires knowledge of logic control technology and Windows system.
Course objectives
On completion of this course, the participant shall be able to:
Know the components parts and the principle of operation of a SIMATIC S5 programmable controller and
the rules governing handling of the hardware and programming of a SIMATIC S5.
Understand the program structure of the high performance programmable controllers.
Be able to make simple program modifications.
Course contents
Introduction to PLC SIMATIC S5 modules, notes on choice of controller, design, and types of
connection.
Start up and operating the SIMATIC S5 programmable controllers and the programmer.
Representation of STEP 5 operations in the form of a control system flowchart (CSF), ladder diagram
(LAD), or statement list (STL).
Logic operations, result of the logic operation, memory / R-S functions, load-transfer operations, timer
functions, counter functions, comparison functions, and basic arithmetic operations.
Data Blocks and Function Block.
Entering program examples in the programmer and transferring them to the programmable controller for
debugging and modifications.
Configuration exercises (defining the tasks, designing the program structure, writing the program and
testing it on the simulator).
Note: All topics are backup by practical exercises using the Field PG / PC and the S5-100U / S5-115U / S5-135U
in conjunction
Arcadia Office Park, Tower F Level 18 Jalan T.B. Simatupang Kav. 88 Pasar Minggu, Jakarta 12520
Phone : +62 (021) 2754 3447 Direct: +62 (021) 2754 3167 Fax: +62 (021) 2754 3481
Email
: Achmad.Firdaus@Siemens.com
Website : www.siemens.co.id
SITRAIN
Industry Automation and Drive Technologies
PLC SIMATIC S5
Maintenance, Trouble Shooting
& Advanced Programming
Course
(S5-S03)
Course locations : Jakarta
5 Days
Target audience
This course is aimed at planning, design and start-up engineer. Knowledge and skills acquired in course of SIMATIC S5
Application and Service / Trouble Shooting are consolidated and extended to enable the participants to write and startup more extensive program.
Pre-requisite knowledge
Participated in SIMATIC S5 Basic Programming and Maintenance & Trouble Shooting Course,
Ability to handle the PG programmer,
Experience in the configuring and start-up of control system.
Course objectives
On completion of the course, the participant should:
Be able to evaluate fault message on the programmable controller, and to recognize and remedy errors in the
program and at the inputs and outputs of the programmable controller.
Be able to make program documentation.
Be familiar to work with EPROM/EEPROM memory sub-module.
Be familiar with the design and structure of the SIMATIC S5 programmable controllers.
Be able to design, write and load more complex programs using the PG.
Be able to read system address, start-up the programs with various modes of operation, and fault handling
block.
Be able to program Analog Value Processing.
Be able to work with the PID control algorithms of the S5115U and S5-135U controllers.
Be familiar with sequence programming technique using GRAPH-5 software.
Course contents
Park, by
Tower
F Level
18 Jalan
T.B.
Simatupang
Kav.
Pasar /Minggu,
12520
Note:Arcadia
All topicsOffice
are backup
practical
exercises
using the
Field
PG / PC and
the88
S5-100U
S5-115UJakarta
/ S5-135U
in
Phone
:
+62
(021)
2754
3447
Direct:
+62
(021)
2754
3167
Fax:
+62
(021)
2754
3481
conjunction
Email
: Achmad.Firdaus@Siemens.com
Website : www.siemens.co.id
SITRAIN
Industry Automation and Drive Technologies
SMART MCC
SIMOCODE PRO
Engineering & Commissioning
Course
(ST-SIMO)
Course locations : Jakarta
3 Days
Target audience
This course is aimed at planning, design and start-up engineer. Knowledge and skills acquired in course of
SIMOCODE PRO Engineering & Commissioning are consolidated and extended to enable the participants to
write and start-up as well as how the devices are linked together via PROFIBUS network.
Pre-requisite knowledge
Course objectives
On completion of the course, the participant should:
Course contents
Overview SIMOCODE PRO functions (motor protection and control functions, monitoring and diagnostic
functions, logic functions).
Overview SIMOCODE PRO components (current detection modules, basic unit, expansion modules,
operator control modules, accessories).
Configuration SIMOCODE PRO in several applications.
Integration SIMOCODE PRO in S7 project via PROFIBUS network.
Integration SIMOCODE PRO in PCS7 project via PROFIBUS network.
Note: All topics are backup by practical exercises using the Field PG / PC and the SIMOCODE PRO demo box in
conjunction.
Arcadia Office Park, Tower F Level 18 Jalan T.B. Simatupang Kav. 88 Pasar Minggu, Jakarta 12520
Phone : +62 (021) 2754 3447 Direct: +62 (021) 2754 3167 Fax: +62 (021) 2754 3481
Email
: Achmad.Firdaus@Siemens.com
Website : www.siemens.co.id
SITRAIN
Training Center Jakarta, Indonesia
Training Course Catalog 2011-2012
COMPANY
COURSE TITLE
CONTACT PERSON
COURSE CODE
TELEPHONE
STARTING DATE
FAX
VENUE
PARTICIPANT
(NAME APPEARS ON CERTIFICATE)
NO
NATIONALITY
JOB TITLE
EMAIL ADDRESS
1
2
3
4
5
6
7
8
Terms and Conditions:
-
NAME
:____________________________
DATE
:____________________________
BILLING ADDRESS
Arcadia Office Park, Tower F Level 18 Jalan T.B. Simatupang Kav. 88 Pasar Minggu, Jakarta 12520
Phone : +62 (021) 2754 3447 Direct: +62 (021) 2754 3167 Fax: +62 (021) 2754 3481
Email
: Achmad.Firdaus@Siemens.com
Website : www.siemens.co.id