Académique Documents
Professionnel Documents
Culture Documents
FOR ELECTRICAL
& COMMUNICATIONS PRODUCTS
CONTENTS
Tapes
Splices
2
3
3
4
Wire Connectors
Scotchlok Electrical Spring Connectors
7
Scotchlok Insulation Displacement Connectors (IDC) 7
Scotchlok Crimping Tools
8
11
23
23
23
24
24
24
25
26
Cable Accessories
End Caps
CC Series Cable Cleaning Systems
Re-enterable Encapsulant Gel
Breakout Boots
28
28
29
29
13
13
14
17
17
17
Thin-Wall Tubing
Medium-Wall Tubing
Heavy-Wall Tubing
Wraparound Heat Shrink Cable Repair Sleeves
Other Heat Shrink Tubing
21
21
31
32
33
33
34
Communication Products
Copper Solutions
Fibre Solutions
Test & Measurement
Heatshrinkable Products
36
37
39
Values
Committed to customer satisfaction
Management of electrical and cable and wire installation is
an industry which demands the highest of standards in terms
of worker safety and component reliability. To meet these
demands, it is vital that component suppliers possess a solid
and comprehensive understanding of the process involved
and the technologies behind the process together with a
commitment to customer support. Based on these parameters,
3M is a model supplier:
We have over 50 years experience in electrical products and
processes and have developed a comprehensive range of
cost-effective, quality products.
We have an on-going commitment to research and
development and the introduction of new products.
All of our products are manufactured to ISO 9000 series
standards.
We constantly strive towards improved levels of customer
and technical support, even though our existing network is
second to none.
Tradition of innovation
Without compromising customer safety, we aim to develop
products which are quicker, cleaner, tougher and more reliable
than anything you may have used before. Innovation is a way
E L E C T R I C A L TA P E S
1
Electrical Tapes
3M Tapes
Unrivalled reliability of
Scotch Tapes
All low voltage insulation
Expertise of the largest tape
manufacturer in the world
WRAPPING TIPS
Vinyl Electrical Tapes - Jacketing & Mechanical Protection
Always use a minimum of two half-lapped layers. The last layer should be wrapped in a more relaxed
mannerlet the last wrap relax to prevent the layer from agging.
Rubber Tapes - Electrical Insulation, Mechanical Padding, Water Sealing and Shaping
Wrap tape tightly to achieve the water tight seal. Rubber tapes are typically overwrapped with vinyl tape.
High Voltage Tapes - Insulating and Semi-conductive Layers
Apply outside of roll to cable, in highly stretched half-lapped layers. Never use a semi-conductive tape as an
insulation.
Mastic Compounds - Insulating, Mechanical Padding, Moisture Sealing and Shaping
Mastic compounds are to be overwrapped with vinyl tapes to initiate ow and watertight seal. Do not apply
excessive amount of mastic to prevent oozing.
3M Tapes
Scotchrap Corrosion Protection Tapes 50 (10 mils) and 51 (20 mils) are tough, polyvinyl
chloride (PVC) tapes with high-tack adhesives that resist corrosion of metal piping systems
above and below ground. Both tapes apply over a wide temperature range and are
resistant to impact, abrasion and punctures. Coat the pipe or other metal surfaces with
Scotchrap Pipe Primer before wrapping with Scotchrap 50 or 51.
Start your job off right with Scotchrap Pipe Primer
A quick-dry, non-sag rubber base primer that permeates metal surface pits and
irregularities, preparing the surface for tape application. Compatible with the special
adhesives on Scotchrap Tapes, it enhances adhesion.
3M Tapes
Dimensions
Thickness
Temp.
Rating
Scotch 22
48mm x 33m
24mm x 33m
10 mil
80oC
Scotch Super
33+
19mm x 33m
7 mil
105oC
Scotch 35
19mm x 6m
19mm x 20m
7 mil
105oC
Scotch Super 88
19mm x 20m
8.5 mil
105oC
Temex 1610
19mm x 20m
6.3 mil
80oC
Temex 1710
19mm x 20m
8 mil
80oC
Scotchrap 50/51
Characteristics
Dimensions
Thickness
25mm x 30m
50 is 10 mil
51 is 20 mil
Temp.
Rating
Thickness
Temp.
Rating
Scotch 13
19mm x 4.5m
30 mil
Continuous
90oC
Short term
130oC
Scotch 23
19mm x 9.1m
30 mil
Continuous
90oC
Short term
130oC
Scotch 24
25mm x 4.5m
Scotch 25
13mm x 4.5m
Scotch 27
12.7mm x
20m
7 mil
130oC
Scotch 70
25mm x 9.1m
12 mil
180oC
Scotch 77
38mm x 6m
75mm x 6m
30 mil
Scotch 130
19mm x 9.1m
30 mil
Continuous
90oC
Short term
130oC
3M 2242
19mm x 4.5m
30 mil
Continuous
90oC
Short term
130oC
Temex 2155
19mm x 6.7m
30 mil
80oC
Scotchl Putty
38mm x 1.5m
125 mil
80oC
Scotch 2510
19mm x
18.3m
7 mil
105oC
Scotch 2520
19mm x
18.3m
8 mil
105oC
Characteristics
Dimensions
Thickness
Temp
Rating
Scotch 2228
50mm x 3.0m
25mm x 3.0m
65 mil
90oC
130oC
Scotch-Seal 2229
45mm x 3.0m
25mm x 3.0m
125 mil
80oC
Scotch VM
19mm x 6.0m
63 mil
80oC
Scotch VM Pads
2210
165mm x
115mm
90 mil
80oC
Scotch VM Pads
2200
95mm x
115mm
125 mil
80oC
3M Tapes
Characteristics
WIRE
CONNECTORS
6
3M Wire Connectors
Wire Connectors
Spring Connectors
Scotchlok Electrical Spring Connectors
Scotchlok Electrical Spring Connectors Y, R, G and B are the original colour-coded wire connectors with a unique soft shell
that is easy on the ngers. Theyre exible, yet durable, and provide a compact, fully-insulated connection that wont cut or
abrade wires. Their torque ns are engineered to provide a comfortable and secure grip, which makes installation fast and
back-off easy.
3M Wire Connectors
E-9BM
8
E-9J
E-9Y
Connector
Features/
Description
Temp. Rating
3M Scotchlok
Connector R
600V
(1000V for signs, lighting
xtures and luminaries)
5,0 mm2-16,0mm2
105oC
3M Scotchlok
Connector Y
600V
(1000V for signs, lighting
xtures and luminaries)
2,0 mm2-17,5mm2
105oC
3M Scotchlok
Connector B
600V
(1000V for signs, lighting
xtures and luminaries)
105oC
3M Scotchlok
Connector G
600V
(1000V for signs, lighting
xtures and luminaries)
105oC
3M Wire Connectors
Spring Connectors
Type
Connector
Special Features
Maximum Insulation
Operating Temperature
3,94 mm
0,5-1,5
105oC
Moisture Resistant
Applications
3,94 mm
0,5-1,5
105oC
557*
Dual Element
Connection
3,05 mm
0,5-1,5
105oC
558*
Flame Retardant
3,05 mm
0,5-1,5
105oC
560
Flame Retardant
3,68 mm
0,75-1,5
Solid/Stranded
14 Stranded
105oC
564
Dry Environment
Applications
3,68 mm
567
Dual Element
Connection
3,68 mm
Tap
4,82 mm
Run
0,75-1,5
Tap
3,0-4,0
Run
105oC
951
T-Tap Disconnect
3,81 mm
0,5-1,0
105oC
952
T-Tap Disconnect
3,81 mm
0,75-1,5
105oC
314
316 IR
0,75-1,5
90oC
Section 2: Specication information for 3M Scotchlok insulation displacement connectors for communication
UAL
2,08 mm
Outside port
1,93 mm
Centre port
1,15-0,5
Solid wire
0,9-0,5
Copper
-40 - 140oC
UR2
2,08 mm
19-26 (0,9-0,4)
Solid Wire
-40 - 140oC
UY2
2,08 mm
19-26 (0,9-0,4)
Solid Wire
-40 - 140oC
211
2,08 mm
0,9-0,4
-40 - 14oC
ScotchCode
Tape Dispensers STD
The ScotchCode Tape Dispenser STD is a compact, carry-along dispenser with ten rellable compartments that hold eightfoot rolls of non-smear polyester tape. Used for marking binder groups, wire or cable, the tapes high tack, acrylic adhesive
resists solvents, oil and water, and adheres rmly to insulation surfaces. An end-loop hooks the dispenser easily to a tool
pouch or belt. Dispensers can be ordered empty or lled with 10 rolls of either pre-printed numbers 0-9 or NEMA colours.
Product Number
Description
STD
STD 0-9
STD-C
Dispenser lled with 10 rolls of coloured tape (one each of black, blue, brown, green, grey, orange, red, violet, white and
yellow.
STD-CX
Dispenser lled with 10 rolls of coloured tape (one each of black, blue, brown, green, grey, orange, red, violet, white and
yellow).
Description
SDR 0-9
SDR A-Z
SDR BK-YL
BK: Black, BL:Blue, BN: Brown, Rd: Red, VL: Violet, GN: Green, GY: Grey, OR: Orange, WH: White, YL: Yellow.
Description
Labels
Per Roll
Write-On Area
W
L
Write-On
Area
Marker Size
W
Recommended
Wire O.D.
SLW
70
25mm
19mm
25mm
127mm
3,8 - 12,4mm
SWD
250
19mm
8mm
19mm
35mm
2,3 - 7,8mm
11
LUBRICANTS,
C O AT I N G S &
S P R AY S
12
Lubricants
3M Wire Pulling Lubricant Gel WL
Temperature stable
Thick, non-runny gel
Colourless and non-staining
Low coefcient of friction
Low residue (<3.5% solids)
UL Listed. Broadly compatible with wire and cable jackets.
3M Wire Pulling Lubricant Gel is a water-soluble, translucent white gel that is easy to handle
and apply to wire and cable without runs or drips. The lubricant produces a low coefcient of
friction that lessens the chance of wire damage from high pulling forces. Not only does Wire
Pulling Lubricant Gel make wire pulling jobs smoother and safer, it also wipes off the cable
quickly and cleanly before terminating or splicing. The consistent gel does not liquefy, or
separate with hot or cold aging. It stays thick, smooth and ready to apply.
Product
unit
WL-QT
0.95L bottle
WL-1
3.78L pail
WL-5
18.92L pail
WL-55
207.90L drum
Pourable
Low residue
Non-staining and slow drying
Compatible with bre optic, telephone and communications cable
Does not separate at high or subfreezing temperatures.
3M Wire Pulling Lubricant Communications is a slow drying water-based liquid lubricant formulated for lightguide cable
pulling. The lubricant produces a low coefcient of friction that lessens the chance of lightguide cable damage from high
puling forces. Wire Pulling Lubricant Communications provides maximum tension reduction for long ber optic pulls, multiple
bend pulls and pulls in hot environments. It will not stress crack low-density polyethylene and is compatible with a broad
range of cable jackets.
Product
unit
WLC-QT
0.95L bottle
WLC-1
3.78L pail
WLC-5
18.92L pail
WLC-55
207.90L drum
Protectants
3M Scotchkote Electrical Coating
Scotchkote Electrical Coating provides vinyl tapes with an extra oil, moisture and corrosion-resistant
layer of exible coating for problem areas. A fast drying sealant and bonding compound, the coating
is provided in a brush top 16 oz. can for quick and easy application, can containing 15 . oz. (0.44L)
of coating. 4 . oz. can also available.
Product
unit
Scotchcote
0.44L
13
Aerosols
Anti-Corrosion Spray 1600
Corrosion protection on: pipes and supports, welds on bitumen protected
pipes, cable racks, switch an control cabinets, battery containers.
Zinc Spray 1617
Through electrochemical bonding with metal, it provides lasting protection
against rust and corrosion, even on damaged surfaces. Ideal as a protective
covering and as a primer for exposed metal construction. Damaged zinc
layers can be repaired quite easily.
Sealer 1601 (clear)
As a protective coating on electrical connections, switches, switchgear, terminal boards, electronic components, printed
circuits, coils, windings and laminated cores. In addition, for use on electrical equipment in vehicles and for repairing electric
motors. Also suitable as a exible covering on construction drawings and similar items.
Sealer Red 1602 (Ivy Spray)
Sealer Black 1603 (Ivy Spray)
Sealer Grey 1604 (Ivy Spray)
As a protective coating on electrical connections, switches, switchgear, terminal boards, electronic components, printed
circuits, coils and windings. In addition, for use on electrical equipment in vehicles and for the repair of electric motors.
Dehumidier Spray 1605
Electrical and electronic equipment, switches, relays, motors, batteries, ignition systems, tools, instruments, threads, etc.
Silicone Lubricant 1609
Lubrication: electrical equipment, locks, hinges, other moving parts. Protection: moisture and corrosion endangered plant
and equipment polished surfaces and shafts, plastic, rubber, leather, etc.
Special Contact Cleaner 1625
Switches, relays, r.c.d. protection, instrumentation, time switches, computer heads, light-duty contacts for video and
magnetic heads.
Degreasing Spray 1626
Ideal for dissolving greases, oils, resins and tar everywhere on electrical equipment, switches, safety cut-outs, motors and
generators.
Rust Remover 1633
Inhibits rust and corrosion. Displaces moisture, dries out electrical equipment (ignition systems, generators, motors, etc.)
Forms a moisture barrier to help prevent trouble before it starts.
Multi-Five Spray 1640
Scotch 1640 Multi Five is a general purpose spray. Due to unique additives, Scotch 1640 Multi Five provides excellent
capillarity activities, lubricating, corrosion and cleaning properties, adhesion to metals and a extreme low surface tension.
Therefore Scotch 1640 Multi Five is able to release screws and remove dirt like adhesives, tar.
It displaces water immediately and avoids tracking currents. The high dielectric strength allows us to use Scotch 1640
for sensitive switch connections. Multi Five spray is furthermore silicone and graphite free and neutral to various surfaces
(plastic, rubber, printings).
Cooling Spray 1632
Refrigeration by supercooling within seconds to -400C, Scotch 1632 localise thermal defects. Assists in repairs to
electronic products: transistors, diodes, resistors, capacitors and semiconductors.
Compressed Air 1638
Universally applicable especially in hard to reach areas: eg. Cracks, scratches, joins, gaps in keyboards or any other nook or
cranny. Ideal cleaning product to remove dirt from awkward areas.
14
Size (ml)
400
400
1602: red
1603: black
1604: grey
400
Dehumidier 1605
400
400
400
400
400
400
400
400
400
15
DIAGNOSTIC &
DETECTION
16
Product
Laser
Sighting
Distance-to-spot
Ratio
Emissivity
Maximum
Temperature
IR-500
Single dot
8:1
Fixed
260oC
IR-999
Single dot
12:1
Fixed
535oC
IR-1100
Single dot
30:1
Adjustable
600oC
IR-1400
Single dot
50:1
Adjustable
760oC
3 dot
60:1
Adjustable
870oC
IR-60EXPL2
IR-500
IR-1100/1400
IR-60EXPL2
17
COLD SHRINK
T E R M I N AT I O N S
18
19
SPLICES
20
Splices
3M Direct Bury Products
These 3M underground electrical wire connectors splice and effectively moisture-seal two or more conductors for remote
control circuits in irrigation and landscape lighting systems.
Product
Number
Wire Range
(AWG)
Volts
Temperature
Range
DBR
30
0o - 49oC
DBY
(2) Tubes
(2) Scotchlok Y Connectors
30
0o - 49oC
3M Splices
Product
Series
UPC
(054007-)
8428-8
42390
8425-8
42391
Minimum
Cable
Diameter
for Seal
Maximum**
Cable Diameter
Insulator Covers
Maximum
Connector
Length
Relaxed
Tube
Length
Inner
Unit
Pack
2,5mm
20,9mm
76mm
203mm
1/
bag
10
20,9mm
76mm
203mm
1/
bag
10
13,9mm
30,1mm
127mm
229mm
1/
bag
10
17,5mm
35,1mm
203mm
1/
bag
10
17,5mm
35,1mm
305mm
1/
bag
10
10,1mm
8426-9
34457
8427-12
34459
8427-16
34460
305mm
406mm
Case
Qty
3M Splices
Tap
13-21 mm
10 mm
FEATURES
Scotchcast kits include 3MS unique and simple to use
Advanced Resin Delivery system - closed mix and pour
(CMP).
Each kit gives you the exibility to use on a range of cable
sizes.
You will nd in each kit all the materials to reinsulate,
moisture seal and mechanically protect one joint.
High quality Scotchcast 1471 polyurethane resin. An
unlled resin with low viscosity gives fast mixing and
pouring, and provides void free lling of the joint.
The convenient Unipak resin container means perfectly
proportioned components for clean easy resin handling.
A translucent mould body enables you to inspect the joint
before and during resin lling to ensure correct joint and
conductor positioning.
KIT SELECTION
For most power cable applications refer to the Scotchcast Selection Guide.
When used for communication cable joints, the kit size may be determined by the number of conductors to be connected
rather than the cable diameter.
As a guide, particularly for other cables, each kit will accomodate the following cable outside diameter.
22
91-A11
91-A11
91-A11
91-A11
1.5
91-A11
91-A11
91-A11
91-A11
2.5
91-A11
91-A11
91-A11
91-A11
91-A11
91-A11
91-A11
91-A12
91-A11
91-A12
91-A12
91-A12
10
91-A11
91-A12
91-A12
91-A12
16
91-A12
91-A12
91-A13
91-A13
25
91-A12
91-A12
91-A13
91-A13
35
91-A12
91-A13
91-A13
91-A13
50
91-A12
91-A13
91-A14
91-A14
70
91-A12
91-A14
91-A15
91-A15
95
91-A12
91-A14
91-A15
91-A15
120
91-A13
91-A15
91-A15
91-A15
150
91-A13
91-A15
91-A16
91-A16
185
91-A13
91-A15
91-A16
91-A16
240
91-A14
91-A16
91-A16
91-A17
300
91-A14
91-A16
91-A17
91-A17
400
91-A15
91-A17
91-A17
500
91-A15
630
91-A15
Scotchcast
Kit
Cable
mm
91-A11
8-22
91-A12
14-30
91-A13
23-35
91-A14
28-35
91-A15
33-55
91-A16
45-70
3M Splices
Number of Cores
Description
4-B
4-C
E-4
P-1B
P-5B
P-3
P-4
23
3M Splices
Scotchcast Resin
High quality range or resins for low and medium voltage applications
Excellent adhesion characteristics to cables
Fits all sizes and types of closures
Excellent mechanical, electrical and chemical resistance
Good handling qualities
Low exotherm
Excellent thermal and mechanical shock resistance
Scotchcast N 4
Scotchcast 1471 N
Scotchcast 1400 U
Scotchcast 2130 U
Scotchcast 48FR
24
Size
Weight
Epoxy resin
High moisture resistance
Excellent mechanical properties
Used in low or medium voltage applications
Easily suitable for injection (RPM) technology
A
B
C
90g
210g
420g
Polyurethane resin
Low exothermic reaction
Unique Closing Mixing & Pouring (CPM) system
Also used in signal and telecommunication applications
B
C
220g
430g
Polyurethane resin
Flame retardant
Excellent resistance against fuels and most mineral oils
Used in mines and industrial plants
EX approval
B
C
210g
420g
Polyurethane resin
Flame retardant
Sea-water resistant
Excellent adhesion properties
Highly exible resin
B
C
210g
420g
CABLE
ACCESSORIES
25
3M Cable Accessories
Cable Accessories
Cold Shrink EC-Series End Caps
Product Description
3M Cold Shrink End Caps are close-ended, tubular rubber
sleeves that are factory expanded and loaded into a removable
core. When positioned over the end of a cable, or other
cylindrical object the core is removed to provide a reliable
environmental seal. Four different end caps are available to
accommodate a wide range of sizes.
Features
Simple and fast installation, no tools required.
Accommodates size ranges from 0.46 - 3.32.
Good abrasion resistance.
Seals tight, retains resiliency for years.
Water resistant.
No mastic or tape required.
Resists Fungus
Resists acids and alkalies.
Resists ozone.
Easily removed.
Applications
Moisture sealing and physical protection for cables, pipes
or other cylindrical objects.
Maintenance
3M Cold Shrink EC-Series End Caps are stable under
normal storage conditions. The end caps are not impaired
by freezing or overheating due to ambient temperatures
encountered during shipping or storage. Normal storage
and stock rotation are recommended.
Product #
(mm)
EC-1
(11,6 - 20,9)
EC-2
(15,9 - 30,1)
EC-3
(26,0 - 49,2)
EC-4
(45,5 - 84,3)
Diameter before
shrinkage (mm)
SKE 4/10
4-8
10
33.5
SKE 8/20
8-16
20
55.3
SKE 15/40
15-32
40
15
90.0
SKE 25/63
25-51
63
25
143.3
SKE 30/76
30-61
76
30
158.0
SKE 45/100
45-80
100
45
162.5
SKE 61/158
61-126
158
61
182.0
26
CC-2
CC-3
CC-4
Sizes
Size 1
Size 2
Size 3
O.D (mm)
11.9-19.8
17-31.9
19.8-37.2
Sizes
Size 4
Size 5
Size 6
O.D (mm)
25.4-56
38.4-74.5
45-106.9
3M Cable Accessories
Pre-moulded
For insulation and sealing of cable crotches
Offers excellent electrical and mechanical protection
Resistant to a variety of corrosive fuels, uids and chemicals
Flame retardant
Internal coating of adhesive for reliable environmental sealing
For indoor and outdoor application
A
B
D
C
SKE 3F / 1 + 1.5
1.5 - 16
Cable diameter
(mm)
11 - 19
Expanded
diameter (mm)
25.0
9.0
9.0
3.0
70
18
SKE 3F / 2
16 - 50
18 - 28
31.0
15.0
18.0
5.0
90
25
SKE 3F / 4
50 - 150
23 - 50
55.8
30.4
22.5
9.0
180
44
SKE 3F / 5
150 - 400
39 - 65
110.0
40.0
35.0
17.5
178
38
Cable diameter
(mm)
SKE 4F / 1 + 2
1.5 - 35
12 - 32
35.0
15.0
12.0
3.0
95
24.0
SKE 4F / 3 + 4
35 - 150
27 - 45
60.0
30.0
22.9
6.4
202
38.1
SKE 4F / 5
150 - 400
37 - 72
78.7
38.1
35.6
13.0
240
55.0
27
H E AT S H R I N K A B L E
PRODUCTS
28
3M Heatshrinkable Products
Heatshrinkable Products
Wide range of Heat Shrink tubes
to insulate electrical cables and
wires
Simple insulation to heavy duty
protection
High reliability
Value for money
Convenient
Black and Colours
Diameter after
shrinkage (mm)
Length (m)
FP-301-3/64
1.2
0.6
0.4
30.0
FP-301-1/16
1.6
0.8
0.4
30.0
FP-301-3/32
2.4
1.2
0.5
30.0
FP-301-1/8
3.2
1.6
0.5
30.0
FP-301-3/16
4.8
2,4
0.5
30.0
FP-301-1/4
6.4
3.2
0.6
30.0
FP-301-3/8
9.6
4.7
0.6
30.0
FP-301-1/2
12.7
6.4
0.6
30.0
FP-301-3/4
19.1
9.5
0.8
15.0
FP301-1
25.4
12.7
0.9
15.0
Kit contents
Kit Quantity
2.35mm
35
4.8mm
30
3.18mm
28
6.5mm
28
4.75mm
21
9.6mm
20
6.35mm
21
12.7mm
14
9.53mm
14
19.1mm
12.70mm
14
25.4mm
29
3M Heatshrinkable Products
Black
Blue
Red
White
G/Y
Cable O.D
FP221VW 1.5/0.75
1.2-0.75mm
FP221VW 3.0/1.5
2.4-1.5 mm
FP221VW 5.0/2.5
4-2.5 mm
FP221VW 7.0/3.5
5.6-3.5 mm
FP221VW 10/5
8-5 mm
FP221VW 13/6.5
10.4-6.5 mm
FP221VW 20/10
16-10 mm
FP221VW 25/12.5
20-12.5 mm
FP221VW 40/20
32-20 mm
FP221VW 50/25
40-25 mm
30
Typical
Cable Range
Expanded/Recovered
I.D
Cable O.D
4-10 mm2
10.2/3.8 mm
9mm to 3.3mm
IMCSN-0800-48A
10-25 mm
20.3/5.6 mm
18mm to 5.6mm
IMCSN-1100-48A
35-60 mm 2
27.9/9.4 mm
24mm to 9.4mm
IMCSN-1500-48A
60-120 mm
IMCSN-2000-48A
185-250 mm 2
38.1/12.7 mm
33mm to 12.1mm
50.8/19.1 mm
44.5mm to 19mm
Typical
Expanded/Recovered
Cable Range
I.D
ITCSN-0400-48
4-10 mm2
10.2/3.8 mm
9mm to 3.3mm
ITCSN-0800-48
10-50 mm2
20.3/5.1 mm
18mm to 5.6mm
ITCSN-1100-48
35-95 mm2
27.9/9.4 mm
24mm to 9.4mm
ITCSN-1500-48
95-185 mm2
38.1/12.7 mm
33mm to 12.1mm
50.8/16.5 mm
44.5mm to 19.0mm
Product Number
ITCSN-2000-48
150-300 mm
3M Heatshrinkable Products
Cable O.D
Diameter before
shrinkage
Diameter after
shrinkage
Length
HDCW 35/10
50mm
8mm
250mm
HDCW 55/15
75mm
13mm
500mm
HDCW 80/25
100mm
23mm
500mm
HDCW 110/30
132mm
25mm
500mm
HDCW 140/40
145mm
32mm
750mm
31
3M Heatshrinkable Products
32
C O M M U N I C AT I O N
PRODUCTS
33
3M Telecommunication Products
Copper Solutions
Volition RJ45 K5E Jack, RJ45 K6 Jack
The 3M Volition K5E, K6 Jacks are a unique and simple Cat. 5e Cat. 6 hardware
component (TIA/EiA-568 B 2 and ISO/IEC 11801 2nd Eddition), utilising the
universally accepted keystone mounting. They offer a quick and reliable connection
as the eight copper conductors are effortlessly terminated in a single operation
without tools.
The jacks are the core product of 3Ms Cat. 5e and Cat. 6 copper structured cable
solution, offering superior performance over Cat. 5e/Cat. 6 link standards.
Product Number Description
VOL-0CK5E-U-X* RJ45 Cat. 5e K5E Jack UTP Tool-less
*X denotes colour. W=White, BU-Blue, G=Green, R=Red, Y=Yellow, BL=Black.
VOL-0CK6-U-X*
RJ45 Cat. 6 K6 Jack UTP Tool-less
*X denotes colour. W=White, BU-Blue, G=Green, R=Red,Y=Yellow, BL=Black.
RJ45 Patch Panel Classic, Black Aluminium for Keystone Jacks unloaded
VOL-PPUD-FX*K
VOL-PP624B
Colour
P33410AA
Black
AE010425302
White
34
Description
VOL-6EUP-L1
VOL-6EUP-L2
VOL-6EUP-L3
VOL-6EUP-L5
Description
QDB-20A
QDB-30A
QDB-60A
QDB-100A
QPB-10
3M Telecommunication Products
Product Number
RCP Modules
RCP - Side Cabling Modules
(for solid and multi-stranded wires)
P46920CE
P46840CE
P46839CE
P46809CE
P46734CE
C234037A
Fibre Solutions
Hot Melt Connectivity
35
3M Telecommunication Products
Product Number
Description
6100-W
6100-B
6300-W
6300-B
8100-YS
8300
3M Couplings
Product Number
Description
6313
8119
ST Single-mode coupling
8310-G
Description
6361
Product Number
Description
2501
2529
Description
XS003808184
XS003811022
XS003810628
36
Advantages
High adhesion
High performance
Low cost
Unipak Packaging
Product Number
Sizes
8882-A
Size A (90ml)
8882-C
Size C (385ml)
8882-D
Size D (659ml)
3M Telecommunication Products
Cable/Pipe/Fault
Marker Locator
M Series
Advanced locator
Model 2250M
Model 2273M
N/A
M-iD Series
Advanced locator reads/writes
to active EMS markers GPS
compatible
Model 2250-iD
Model 2273M-iD
Model 2250M-iD
Model 2273M-iD
Model 2250
Model 2210
Model 2273
Model 2205
Model 2206
N/A
N/A
Model 1420-iD
2200 Series
Basic locator
1420-iD
Reads/writes to active EMS
markers GPS compatible
37
3M Telecommunication Products
38
Telephone
CATV
Power
Water
Wastewater
Gas
Cable paths
Splices
Buried service drops
Load coils
Conduit stubs
Fibre optic facilities
Branch splices
Cable paths
Fibre optic facilities
Buried service drops
Road crossings
Buried splices
Cable paths
Service drops
Conduit slabs
Buried splices
Road crossings
Branch splices
Buried transformers
Pipeline paths
Service stubs
Clean-outs
Road crossings
Pipeline paths
Service stubs
PVC pipeline
Buried valves
Road crossings
Tees
Pipeline buried
Min stubs
Service stubs
Tees
Road crossings
Valve boxes
Metre boxes
General
Purpose
Water
Wastewater
Gas
Black/
orange
Purple
Blue
Green
Yellow
1422XR/iD
1427XR/iD
1428XR/iD
1423XR/iD
1424-XR/iD
1425XR/iD
1.5m
1401-XR
1402-XR
1407-XR
1408
1403-XR
1404-XR
1405-XR
1.5m
Near-Surface Marker
Product Number
1432
1433
N/A
N/A
1434
1435
1436
0.6m
Mini-Marker
Product Number
1255
1256
N/A
N/A
1257
1258
1259
1.8m
Full-Range
Product Number
1250
1251
N/A
N/A
1252
1253
1254
2.4m
Colour
ACTIVE
EMS iD Ball Marker
Product Number
PASSIVE
Ball Marker Extended Range
Product Number
Telephone
Power
CATV
Orange
Red
1421XR/iD
Read Range *
3M Telecommunication Products
Specications
39
40