Académique Documents
Professionnel Documents
Culture Documents
Page 1 of 2
About Us
Casting Products
Casting Workshop
Machining Workshop
Inspection
Certificate
Blog Articles
Contact Us
The followings are its equivalent grades, chemical composition, mechanical properties, and some photos of grey iron castings made
by Dandong Foundry.
Besides GG25 in standard DIN 1691, this grade is also equivalent to the following grades:
ISO 185 - Class 250
GB 9439 - HT250 in China
ASTM A48 - Class 35 in USA
UNI 5007 - G25 in Italy
UNF - FG25 in Spain
AS 1830 - T250 in Australia
NS11 100 - SJG250 in Norway
The normal chemical composition should be C = 2.8-3.3, Si = 1.2-1.7, Mn = 0.8-1.2, P 0.15, S 0.12.
Please notice, the chemical composition can not be taken as material quality inspection standard. In all standards, the chemical
composition is just for reference. The grey iron foundries could adjust their composition according to their own production condition
and experience, as long as they could guarantee to meet the mechanical properties, which is the only inspection standard.
However, if the iron castings need to meet special application, so will require the specific chemical composition, then the buyers
should denote this requirement clearly, and the grey iron foundries should take it as the quality standard.
Only the tensile strength is the quality inspection standard. Other mechanical properties are only for reference unless the buyers have
particular requirements.
Moreover, will cause the casting parts more crispy. So, if the lower tensile strength could meet your use, better to choose lower grade
EN-GJL-200, GG20.
http://www.iron-foundry.com/en-gjl-250-cast-iron-gg25.html
27.01.2016
Page 2 of 2
http://www.iron-foundry.com/en-gjl-250-cast-iron-gg25.html
27.01.2016