Académique Documents
Professionnel Documents
Culture Documents
a b
Linkping University
To cite this article: Pontus Braunerhjelm & Dan Johansson (2003): The Determinants of Spatial Concentration: The
Manufacturing and Service Sectors in an International Perspective, Industry and Innovation, 10:1, 41-63
To link to this article: http://dx.doi.org/10.1080/1366271032000068096
1 Financial support from The Swedish Council for Work Life Research (RALF) is gratefully acknowledged.
42
that of France and the USA. This will be achieved by implementing a unique Swedish
data-set embracing total Swedish production at the four-digit ISIC level for the years
1975 and 1993, which contains detailed information on regional distribution of
production, size classes, trade costs and knowledge intensity.
The analysis will be pursued stepwise. First, we will examine the pattern of
spatial concentration at an aggregate level, emphasizing the differences between
and the dynamics withinthe manufacturing and service industries by calculating
EllisonGlaeser concentration indexes (henceforth denoted EG-indexes) for 1975
and 1993. As an alternative measure of concentration, we will also present results
based on locational Gini-coefficients. In addition, a comparison of regional concentration in France, Sweden and the USA will be presented. Second, through regression
analysis, we proceed with a detailed analysis of regional concentration in the Swedish
manufacturing sector. More precisely, we test to what extent knowledge intensity,
production technology, transportation costs, raw material intensity, initial regional
concentration and, finally, the size and growth of industries, are capable of explaining
geographically concentrated production structures.
The rest of the paper is organized as follows. In the next section, we briefly
survey some of the more influential and important research contributions in this area.
We then present the measures of geographical concentration that will be implemented
in the analysis. Thereafter, data, empirical method and the hypotheses are discussed,
followed by the results of the empirical model, and then some concluding remarks.
43
allowing labor mobility, it was shown how sensitive equilibrium was to small
parametric changes. The dynamics of these forces tends to induce centripetal forces
fostering agglomeration. Depending on trade costs, and the production technology
(plant or multi-plant economies of scale), these agglomeration effects could either be
reinforced or dampened. Since then, this line of research has been further developed
by a number of scholars (e.g. Brainard 1993; Markusen 1995; Venables 1996). The
analytical results of these models have also been questioned, however. For instance,
Davis (1999) shows that the results in Krugmans model vanish if the assumption of
immobility of agricultural labor is relaxed. Furthermore, Puga (1999) discusses the
importance of the degree of labor mobility.
In a partial equilibrium setting, economic geographers have, for a long time, studied
spatial aspects of economic activities. Valuable insights into the mechanisms and
driving forces behind the pattern of location have, for instance, been provided by
detailed studies on local industrial systems (Markusen et al. 1986; Storper and Walker
1989; Harrison 1992; Saxenian 1994; Markusen 1996). One issue of particular interest
concerns the influence of knowledge factors on the spatial distribution of economic
activities. In a comprehensive study of the localization of innovations, Feldman (1994)
concludes that the rate of innovation can be linked to specific geographic clusters.
The importance of knowledge factors, measured in terms of R&D spending or
innovative performance, has been highlighted in a number of empirical studies, e.g.
by Thomas (1985), Sweeney (1987), Jaffe (1989), Jaffe et al. (1993), Audretsch (1995),
Anselin et al. (1997), Audretsch and Feldman (1996), Audretsch and Stephan (1996),
and Varga (1998), to mention a few.3 Overall, the conclusion is that knowledgeintensive activities tend to be spatially concentrated.4
However, results to the contrary are also reported here. In particular, Krugman
(1991a), applying regional Gini-coefficients, asserts that the same degree of concentration prevails in typically low-tech industries, for instance textiles (see also Porter
1998).5 Ellison and Glaeser (1994, 1997) implement a more sophisticated concentration measure (the EG-index) than the rather crude Gini-coefficients. The EG-index is
constructed to control for differences in the size distribution of plants across
industries. In principle, the EG-index displays to what extent regional concentration
deviates from a dartboard distribution of production. Ellison and Glasear conclude
that almost every industry at the SIC four-digit level is more concentrated than what
would be the case if locational choices were completely independent between plants.
Still, the degree of concentration is relatively moderate. Further, Maurel and Sedillot
(1999), applying Ellison and Glaesers methodology, report a corresponding degree
of concentration in France, albeit somewhat lower, on average, than in the USA. In
3 Some studies also claim that after a certain level of concentration has been reached, dis-economies of
agglomeration appear due to the increased demand for labor and upward pressure on wages (Tran 1986;
Hansen 1990). This seems to suggest that labor intensive production, which is sensitive to differences in relative
costs (homogeneous goods), would be less clustered. This has generated the idea of an optimal size of clusters,
which has also gained some empirical support (Wheaton and Shisido 1981; Barkely 1988; Dieprink and Nijkamp
1988).
4 This relates to Griliches (1979) knowledge production function.
5 In Europe, Haaland et al. (1998) find weak support for human capital intensity in inducing regional concentration.
Braunerhjelm and Svensson (1996) show how high-tech multinational firms are more likely to invest in
agglomerated regions.
44
j1
c G 1; x2i H
i
1 ; x2i
i
(1H).
(1)
45
(2)
i1
46
Rank
ISIC
1
2
3
4
5
61
62
63
64
65
3825
3522
3851
3832
3521
3812
3117
3111
3311
3319
Salaries/
wages
Manufacture of office, computing and accounting machinery
Manufacture of drugs and medicines
Manufacture of professional and scientific, and measuring and controlling equipment
Manufacture of radio, television and communication equipment and apparatus
Manufacture of paints, varnishes and lacquers
Manufacture of furniture and fixtures primarily of metal
Manufacture of bakery products
Slaughtering, meat products
Sawmills, planing and other wood mills
Manufacture of wood and cork products not elsewhere classified
3.47
3.15
2.50
2.08
1.85
0.41
0.40
0.39
0.36
0.30
Empirical analysis
We take a two-step approach in the empirical analysis. First, we show the spatial
concentration of production in the manufacturing and service industries, i.e. we
calculate the EG-indexes and the locational Gini-coefficients for the manufacturing
and service sectors, respectively. We examine how concentration has changed in the
period 197593, the rank stability across industries, and whether differences across
the manufacturing and service industries can be detected. Finally, we compare the
concentration in the Swedish manufacturing sector with that of France and the USA.
Thereafter, we proceed with a regression analysis. This part of the analysis contains
a more rigorous attempt at econometrically pinning down the determinants of
concentration at the four-digit level. Due to data limitations, this analysis is restricted
to the manufacturing sector. We elaborate with two different specifications of the
econometric model. In the first run of regressions, we estimate which variables have
influenced the level of concentration in manufacturing production, as defined by our
concentration variables (the EG-index and the Gini-coefficient in 1975 and 1993). In
the subsequent step, we study the changes in regional concentration between 1975
and 1993, i.e. the variables are defined as a change over time expressed as a
percentage. All level data are expressed in logarithms, and the regressions are
corrected for heteroscedasticity by applying Whites (1980) method. There are no
signs of autocorrelation in the error term and the standard properties are assumed to
prevail, N(0, p2), and E(ei ej)0 for ij.10 Hence
conci,t a0 a1 techi,t a2 skilli,t a3 trai,t a4 zi,t ei,t
(3)
(4)
and
47
i.e. 1975 or 1993, respectively. In expression (4), the dependent variable is calculated
as the change in regional concentration (levels) between 1975 and 1993 in the
following way:
(5)
Alternatively, we will regress the changes in the independent variables on the level
of regional concentration in 1993.
In addition to our main explanatory variables skill, production technology and trade
costs, all defined above, we have also implemented a few control variables contained
in vector Z. These are the following: the relative size of the industry, measured as the
industrys share of total manufacturing employment (INDSIZE), and the industrys
dependency on raw material, measured as a cost share of total turnover (RAW). In
addition, in some of the estimations where the dependent variable is regional
concentration in 1993 (CONC93), we have incorporated the initial level of concentration as an explanatory variable (CONC75). Finally, dummies for industries (DI) at the
three-digit level have also been implemented to capture industry-specific effects.
When we apply change over time expressed as a percentage in the regressions, the
explanatory variables are identical to those defined above.
Hypotheses
Two sets of hypotheses will be tested. A first hypothesis of a more general character
concerns the pattern of spatial concentration across the different industries. We
expect manufacturing industries (ISIC 3) to be more spatially concentrated, on
average, than service industries (ISIC 69). The reason is that service production is,
to a large extent, based on the proximity to customers/markets, leading to a more
dispersed production. Moreover, plant level economies of scale predominantly appear
in manufacturing production, being more capital and R&D intensive. Hence, these
inherent differences between manufacturing and service industries, such as retail
trade, banks and repair services, should show up in different levels of regional
concentration. Moreover, we expect concentration to be increasing over time due to
deregulation and less expensive transport.
As regards the inter-country comparison, we do not have any a priori expectations
concerning the relation between France and Sweden. The USA can be expected to
be the most concentrated country since deregulation started much earlier there,
allowing firms to exploit agglomeration economies in their locational decisions. It has
also been shown that regional concentration is, on average, stronger in the USA than
in Europe (Braunerhjelm et al. 2000; Midelfart-Knarvik et al. 2000). Hence, we expect
it to be lower in Sweden as compared to the USA.
Second, turning to the econometric analysis, our hypotheses are based on the
predictions that stem from the theoretical advances on locational issues, briefly
referred to in the second section. Linkages, predominantly knowledge spillovers, are
assumed to have a positive impact on productivity, thereby promoting the concentration of production. A higher share of non-production workers in relation to production
workers (SKILL) is consequently assumed to exert a positive impact on concentration
of production. As mentioned above, a number of studies have concluded that
48
knowledge spillovers are sticky, i.e. they are spatially concentrated to certain
regions.
As regards pecuniary linkages, i.e. relations to suppliers and customers, no data are
available that directly capture these relations.11 To some extent, such linkages are
captured by regional concentration of production appearing in the base year 1975.
Regions that were specialized in a certain industrial production in 1975 can be
expected to be relatively abundant in suppliers of components and complementary
products, and in labor with the appropriate skill structure, for that particular industry.
Therefore, we apply the initial regional concentration as a proxy for such linkages.
Note, however, that this variable could also be viewed as a proxy for pathdependence, i.e. initially concentrated regions tend to remain so over time. We
expect regional concentration in the base year 1975 to be positively related to
concentration in 1993.
The second core determinant of spatial concentration is related to production
technologies (TECH). Since we have data on employment distributed on industries
and size classes, we will adopt the average establishment size in the respective fourdigit industry as our proxy for production technology. Average establishment size
may be associated with plant level economies of scale, which theory predicts to be
positively associated with concentration of production. However, according to the
definition of the EG-index, scale effects should not influence this measure of regional
concentration, implying that the TECH variable may capture effects associated with
the labor market, such as the pooling of specific skills. Alternatively, regulations could
also have fostered larger plants in certain industries.12 Consequently, the results must
be interpreted with caution.
The final major determinant of regional concentration adheres to trade costs. Here,
it is measured as a cost share in relation to turnover at the four-digit industry
level. Thus, considering that we are examining regions within a country, a pure
transportation cost measure is applied. We expect low trade costs to be positively
related to the degree of spatial concentration.
The interpretation of this variable is somewhat intriguing, however. At the industry
level, spatially concentrated industries may also have high transportation costs. This
could, for example, be the case for the Swedish forest and steel industries.
Furthermore, industries with a large dependence on raw material could be expected
to locate either close to these resources or in regions with good transport facilities
(ports, railroad communications, etc.). To account for these effects, we have included
an explanatory variable defined as the costs of raw material in relation to turnover
(RAW). This variable is expected to have a positive effect on geographical concentration. We will also investigate whether industries exposed to high trade costs in 1975
have had a higher propensity to concentrate production as compared with other
industries.
11 The closest measure of such linkages is probably inputoutput matrices. However, at this level of aggregation,
data on inputoutput structures are not available. For an application of inputoutput matrices at a more
aggregated level, see Braunerhjelm and Carlsson (1999).
12 For instance, Davis and Henrekson (1999), and Henrekson and Johansson (1999), claim that tax and labor
regulations have had an impact on the size distribution of firms, which differs across the industries in the
Swedish manufacturing sector.
49
Concerning the remaining control variables, more sizeable industries can, in general,
be expected to be more regionally dispersed than smaller industries. To control for
that effect, we include the relative size of the respective industry in the regressions
(INDSIZE).
As we look at the dynamic pattern, i.e. the changes between 1975 and 1993, we
hypothesize that the industries becoming more knowledge intensive, experiencing
substantial falls in trade costs and increased average size in terms of employees,
should also have become more concentrated. The size variable (INDSIZE) now
controls for growth in the respective industry. It is likely that industries growing faster
will also be more dispersed as compared with declining industries. Concentration in
the base year (CONC75i ) will now be implemented as a control variable for the level
of concentration in that year. If there has been a general trend towards regional
concentration, it is conceivable that strong concentration already in 1975 implies a
lower rate of change for a particular industry, as compared with other industries less
concentrated in 1975 (path-dependence). On the other hand, if agglomeration
economies exert a strong positive influence on performance at the plant level, then
initially concentrated production is likely to have had the greatest impact on location
in the period up to 1993.
The definitions and expected signs of the explanatory variables are summarized in
Table 2.
TABLE 2: DESCRIPTION OF VARIABLES
Variables
EllisonGlaeser concentration
indexes 1993 (CONC93) and
1975 (CONC75)
Locational Gini-coefficients
Expected effect
on spatial
concentration
50
RESULTS
Regional concentration
As a first observation, we note that the correlation between the EG-index and the
locational Gini-coefficients is indeed quite low. For both 1975 and 1993, the correlation
coefficient is about 0.44.13 Consequently, depending on which concentration measure
is chosen, the results may differ considerably. For reasons described above, we believe
that the EG-index gives a more accurate picture of regional concentration, but we
will also report some results based on locational Gini-coefficients since that measure
has been applied in previous research, notably that of Krugman (1991a).
Manufacturing
Starting with a more aggregated level (two-digit level), the distribution of the
Swedish manufacturing industries on dispersed, moderately concentrated and strongly
concentrated industries is shown in Table 3.14 The classification into the respective
categories follows that of Ellison and Glaeser, that is, a value of c\0.02 means that
an industry is regionally dispersed, whereas a c in the range 0.020.05 defines
moderately concentrated industries, and a c[0.05 implies a strong regional concentration. More than 50 percent of the Swedish manufacturing industries fall into the latter
category, i.e. the most concentrated one, and barely somewhat more than 20 percent
can be linked to the least concentrated category. Hence, the overall picture is a quite
concentrated structure in the Swedish manufacturing sector.
Turning to a somewhat finer level (four-digit), the degree of geographical concentration of manufacturing industries is illustrated in Figure 1. Applying the same yardstick
as Ellison and Glaeser, all of the 30 most concentrated industries have an EG-index
exceeding 0.06, implying that all of them are defined as highly concentrated. (The
details for the 30 most concentrated industries are given in Table 4.) The average and
median values for all manufacturing industries are 0.063 and 0.051, respectively. This
is considerably higher than for the USA, where the corresponding values are 0.051
and 0.026 (Ellison and Glaeser 1997).
The EG-index of the 10 most concentrated industries ranges from to 0.417 (knitting
mills, ISIC 3213) to 0.154 (sugar factories and refineries, ISIC 3118). There is nothing
in the data at this level suggesting that knowledge-intensive industries are more likely
to be spatially concentrated than other industries. Rather, a contrary pattern is
revealed, which is in line with Krugmans (1991a) findings. The only obvious hightech industry among the top 10 is Manufacturing and repair of aircraft (ISIC 3845),
ranked number four. The next knowledge-intensive industry appears in 15th place,
that is, Manufacture of office, computing and accounting machinery (ISIC 3825).
The remaining industries are all low-tech. In general, there are few knowledgeintensive industries among the 30 most concentrated industries. Note that a similar
pattern emerges among the 15 least concentrated industries (Table 5), where one
13 This is about the same magnitude as in Maurel and Sedillots (1999) study.
14 The US and Swedish data are classified according to the SIC and ISIC classification system, respectively. The two
classification systems are comparable at an aggregated level, while it is more difficult to get a correspondence at
a disaggregated level.
51
AND THE
Two-digit industry
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
c[0.02, 0.05]
c[0.05
USA
Sweden
USA
Sweden
USA
Sweden
47
0
9
13
29
69
53
71
38
60
73
0
58
39
61
49
41
28
47
44
41
53
n.a.
0
0
0
0
33
100
29
100
0
0
0
0
0
17
0
20
67
25
23
18
0
13
42
47
8
47
14
24
0
27
36
27
35
32
26
46
33
41
22
27
20
n.a.
17
0
0
0
33
0
0
0
50
0
67
0
75
67
25
20
0
25
21
35
100
78
45
24
23
0
14
38
40
0
64
15
27
8
26
14
39
11
33
32
27
n.a.
83
100
100
100
33
0
71
0
50
100
33
100
25
17
75
60
33
50
56
Source: Ellison and Glaeser (1997: Table 3), Statistics Sweden (1975, 1993) and own calculations.
52
Services
As regards the service industry, a first observation is that concentration is much less
evident than in manufacturing (Figure 2). Among the 30 most concentrated industries
(Table 6), the EG-index ranges from 0.322 (air transport carriers, ISIC 7131) to 0.014
(other repair shops not classified elsewhere, ISIC 9519). The average EG-index is
0.011 whereas the median is 0.013, i.e. considerably below the concentration in
manufacturing. Considering the least concentrated service industries, we also note
that retailing industries are well represented (Table 7), which is also in line with our
expectations.
However, the most prominent difference as compared with manufacturing relates
to the dynamics of the two sectors. In the service sector, spatial concentration has
declined in 22 out of 30 service industries. Similarly, 22 service industries have
experienced employment growth between 1975 and 1993, which stands in sharp
contrast to the manufacturing sector.17 In addition, it seems as if knowledge-intensive
industries are more frequently represented among the top 10 most concentrated
service industries, as compared with the manufacturing sector. For instance, Air
transport carriers (ISIC 7131), Financial services (ISIC 8103), Other financial
institutions (ISIC 8102), Radio and television broadcasting (ISIC 9413), and Advertising services (ISIC 8325), could all be claimed to belong to the knowledge-intensive
17 Data on the change in regional concentration are available upon request. As noted above, the information for the
public sector is shaky for 1975, particularly with respect to ISIC 720 and several of the industries in ISIC 9, and
the result for these industries must be interpreted with caution.
53
INDUSTRIES IN
CHANGE IN EMPLOYMENT
Rank
EG 93
ISIC
code
1
2
3
4
5
6
7
3213
3115
3114
3845
3691
3211
3233
8
9
3559
3529
10
11
12
13
14
15
3118
3512
3231
3214
3215
3825
16
3849
17
18
19
3113
3903
3831
20
21
22
23
24
25
26
27
28
29
3232
3909
3513
3833
3411
3522
3319
3219
3843
3511
30
3311
Change
empl.
7593
(%)
Activity
EG 93
Rank
EG 75
Rank
Gini
93
Knitting mills
Manufacture of vegetable and animal oils and fats
Canning, preserving and processing of fish
Manufacture and repair of aircraft
Manufacture of structural clay products
Spinning, weaving and finishing textiles
Manufacture of products of leather and leather
substitutes
Manufacture of rubber products not elsewhere defined
Manufacture of chemical products not elsewhere
classified
Sugar factories and refineries
Manufacture of fertilizers and pesticides
Tanneries and leather finishing
Manufacture of carpets and rugs
Cordage, rope and twine industries
Manufacture of office, computing and accounting
machinery
Manufacture of transport equipment not elsewhere
classified
Canning and preserving of fruits and vegetables
Manufacture of sporting and athletic goods
Manufacture of electrical industrial machinery and
apparatus
Fur dressing and dyeing industries
Manufacturing industries not elsewhere classified
Manufacture of synthetic resins, etc.
Manufacture of electrical appliances and housewares
Manufacture of pulp, paper and paperboard
Manufacture of drugs and medicines
Manufacture of wood and cork products
Manufacture of textiles not elsewhere classified
Manufacture of motor vehicles
Manufacture of basic industrial chemicals except
fertilizers
Sawmills, planing and other wood mills
0.417
0.350
0.310
0.227
0.226
0.224
6
41
3
12
4
7
8
3
11
10
16
24
80.98
4.06
40.60
15.75
75.25
66.40
0.202
0.163
18
35
25
19
71.01
48.76
0.159
0.154
0.141
0.138
0.124
0.123
42
9
11
65
15
19
26
7
6
2
13
22
19.46
37.04
57.22
65.25
84.48
68.57
0.105
32
33
32.01
0.102
0.099
0.088
50
28
24
20
21
9
5.79
26.20
54.54
0.086
0.072
0.072
0.071
0.071
0.069
0.065
0.064
0.064
0.063
8
2
34
38
20
27
17
31
10
40
30
4
40
41
18
37
27
50
23
57
41.53
91.03
5.61
2.04
2.30
29.59
75.13
46.94
69.30
21.68
0.062
0.062
25
30
44
60
2.05
44.70
sphere. Hence, at least 5 out of the 10 most concentrated industries belong to more
advanced production. Rank stability is also higher in the case of service industries.
Applying locational Gini-coefficients, a similar pattern is once more revealed, but
the ranking of industries is affected. In comparison to the EG-index, only 4 among
the top 10 most concentrated industries coincide. Hence, there seem to be inherent
differences between manufacturing and services, which have been accelerating over
the period studied.
54
INDUSTRIES IN
CHANGE IN EMPLOYMENT
Rank
EG 93
ISIC
code
1
2
3
4
5
6
7
8
9
10
11
12
13
14
3134
3131
3119
3133
3852
3523
3121
3822
3842
3902
3112
3117
3851
3419
16
3521
Activity
Soft drinks and carbonated waters industries
Distilling, rectifying and blending spirits
Manufacture of cocoa, etc.
Malt liquors and malt
Manufacture of photographic and optical goods
Manufacture of soap and cleaning preparations
Manufacture of food products
Manufacture of agricultural machinery and equipment
Manufacture and repair of railroad equipment
Manufacture of musical instruments
Manufacture of dairy products
Manufacture of bakery products
Manufacture of measuring and controlling equipment
Manufacture of pulp, paper and paperboard, not
elsewhere defined
Manufacture of paints, varnishes and lacquers
Change
empl.
7593
(%)
EG 93
Rank
EG 75
Rank
Gini
93
0.255
0.061
0.050
0.049
0.040
0.027
0.023
0.023
0.014
0.004
0.004
0.006
0.008
8
2
3
6
7
46
10
48
16
40
9
13
55
34
17
45
15
46
49
51
28
47
31
64
65
55
12.36
28.92
14.35
52.32
10.53
45.36
65.70
78.78
12.22
65.01
3.41
18.30
34.27
0.013
0.016
21
33
53
42
60.63
29.30
55
Rank
EG 93
ISIC
code
1
2
3
4
5
6
7
8
9
7131
8103
9411
8102
9413
6132
7122
8325
6141
10
11
9414
6129
12
13
14
15
16
17
18
8323
6112
9511
7121
8329
6131
6122
19
20
21
22
23
24
25
26
27
28
29
30
8321
6142
9399
7123
6123
9592
7191
9412
7113
9415
7116
9519
Change
empl.
7593
(%)
Activity
EG 93
Rank
EG 75
Rank
Gini
93
0.322
0.267
0.223
0.209
0.125
0.118
0.091
0.085
2
3
1
6
59
22
24
4
4
16
6
21
8
18
9
40
88.59
1,286.88
179.52
71.85
23.63
50.37
66.82
98.43
0.064
0.056
14
9
23
14
26.84
124.90
0.056
0.052
0.052
0.047
0.047
0.042
0.040
13
12
20
31
10
16
25
26
42
32
11
5
59
24
28.27
467.60
56.08
27.92
81.84
250.64
27.67
0.039
0.035
0.034
0.030
0.026
0.026
0.023
0.020
0.018
0.017
0.016
0.015
0.014
29
19
18
8
26
7
30
28
23
27
15
17
45
17
45
12
34
10
20
13
36
28
46
25
33
22
8.82
188.01
23.57
167.94
7.21
22.07
11.55
40.89
24.56
51.77
279.35
93.89
136.91
An inter-country comparison
Tables 8 and 9 present regional concentration in Sweden as compared with that of
France and the USA. We start with a somewhat more aggregate level in Table 8, where
we compare our results with those provided by Maurel and Sedillot (1999) and Ellison
and Glaeser (1997), respectively. Our data are from the same year as in the French
study (1993), whereas the data in Ellison and Glaesers work are somewhat older and
refer to 1987.
Comparing 17 industries (SIC 2), Sweden displays the highest regional concentration
among the three countries in 16 of these industries, whereas Francetogether with
the USAis shown to have the highest concentration in one industry, Instruments
56
Rank
EG 93
ISIC
code
1
2
3
4
5
6
9514
6143
6251
9512
6232
6239
7
8
9
10
11
12
13
14
15
7111
6233
7132
6222
6121
6223
9331
9591
6221
Activity
Watch, clock and jewelry repair
Agent wholesaling of transport equipment
Retailing of pharmaceutical preparations
Electrical repair shops
Retailing of house furnishing goods
Retailing of infrequently bought commodities, not
elsewhere classified
Railway transport
Retailing of jewelry, optical and photographic goods
Supporting services to air transport
Retailing of paints and cosmetics
Wholesaling of food, beverages and tobacco
Tobacco, book and stationery retailing
Medical dental and other health services
Barber and beauty shops
Department store of retailing of everyday commodities
Change
empl.
7593
(%)
EG 93
Rank
EG 75
Rank
Gini
93
0.138
0.033
0.003
0.002
0.001
6
18
24
14
10
3
2
57
39
55
91.53
1.31
18.35
1.37
3.07
0.000
0.000
0.000
0.001
0.001
0.002
0.002
0.002
0.002
0.002
28
1
12
0
9
20
21
30
16
11
30
29
62
15
43
38
58
61
47
48
304.84
1,250.82
44.83
408.63
6.25
4.50
48.74
150.19
26.64
25.65
TABLE 8: GEOGRAPHIC CONCENTRATION IN THE USA, FRANCE AND SWEDEN ACCORDING TO THE
ELLISONGLAESER INDEX (TWO DIGIT SIC CATEGORIES)
USA 1987
Two-digit industries (US definition)
Textile mills product
Leather and leather products
Furniture and fixtures
Lumber and wood products
Primary metals industry
Instruments and related products
Transportation equipment
Apparel and other industries
Miscellaneous manufacturing industry
Chemicals and allied products
Paper and allied products
Electronic and other electrical equipment
Printing and publishing
Fabricated metal products
Rubber and misc. plastics
Stone, clay and glass products
Industrial machinery and equipment
Average
France 1993
Sweden 1993
Rank
Rank
Rank
0.127
0.013
0.019
0.018
0.018
0.018
0.016
0.016
0.012
0.009
0.006
0.005
0.005
0.005
0.004
0.004
0.003
0.018
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
0.036
0.039
0.008
0.012
0.01
0.018
0.000
0.020
0.014
0.012
0.007
0.004
0.032
0.003
0.006
0.003
0.002
0.013
2
1
10
8
9
5
17
4
6
7
11
13
3
14
12
15
16
0.141
0.098
0.073
0.061
0.111
0.009
0.047
0.135
0.050
0.022
0.055
0.007
0.004
0.030
0.150
0.047
0.010
0.062
2
5
6
7
4
15
11
3
9
13
8
16
17
12
1
10
14
57
TABLE 9: GEOGRAPHIC CONCENTRATION IN THE USA, FRANCE AND SWEDEN, ACCORDING TO THE
ELLISONGLAESER INDEX FOR SPECIFIC THREE-DIGIT (SIC) INDUSTRIES
Three-digit industries
USA
1987
c
France
1993
c
251
252
271
272
273
278
371
372
373
374
375
376
0.058
0.027
0.002
0.067
0.025
0.011
0.083
0.024
0.018
0.123
0.010
0.196
0.01
0.006
0.001
0.371
0.292
0.018
0.000
0.018
0.044
0.045
0.007
0.039
Household furniture
Office furniture
Newspapers
Periodicals
Books
Blankbooks and bookbinding
Motor vehicles and equipment
Aircraft and parts
Ship and boat building and repairing
Railroad equipment
Motorcycles, bicycles and parts
Guided missiles, space vehicles, parts
Sweden
1993
c
n.a.
n.a.
n.a.
n.a.
n.a.
n.a.
0.063
0.227
0.041
0.014
n.a.
0.102
and related products (Table 8). The USA, on the other hand, is more concentrated
than France, even though the difference is not that large. These findings are also
revealed in the average EG-indexes for Sweden and the USA. Furthermore, simple
correlation reveals a relatively close resemblance between regionally concentrated
industries in France and the USA, whereas France and Sweden display the largest
differences.18 In addition, we have also calculated Spearman rank correlation tests to
examine the ranking of industries within the three countries. It turns out that there
is no statistical significance between the ranking of industries in Sweden and the
other two countries. However, the ranking of concentrated industries in France and
the USA is correlated and significant at the 5 percent level.19
Again, following Maurel and Sedillot (1999), we also provide a comparison of
regional concentration at a more disaggregated level (three-digit level SIC) for a
limited number of industries. These are reported in Table 9. Unfortunately, we only
have five industries at this level that are comparable across all three countries. In four
cases (motor vehicles and equipment SIC 371, aircraft and parts SIC 372, railroad
equipment SIC 372, and guided missiles, space vehicles, parts SIC 376), the USA is
shown to have the most regionally concentrated industries, whereas Sweden has the
second highest concentration in four out of these five industries. Hence, an analysis
at a finer level may modify the results obtained at a more aggregated level.
To summarize this section, Sweden was shown to have the strongest regional
concentration among the three countries, measured by EG-indexes. France and the
USA reveal the largest similarities in terms of degree of concentration and the ranking
of concentrated industries. However, this pattern seems somewhat sensitive to the
degree of aggregation in the analysis.
18 The correlation coefficients are 0.51 between France and the USA, and 0.31 between France and Sweden.
19 The coefficients are as follows: France and the USA (Spearmans rho 0.51), Sweden and the USA (Spearmans rho
0.41), and France and Sweden (Spearmans rho 0.27).
58
Regression results
The results of the regressions are shown in Tables 10 and 11. Industry dummies have
been implemented in all estimations. The dependent variable is the level of spatial
TABLE 10: REGRESSION RESULTS. DETERMINANTS OF SPATIAL CONCENTRATION. ELLISONGLAESER
INDEX (EG) 1993 AND 1975, AND GINI-COEFFICIENT (GC) 1993
Constant
TECH
SKILL
TRA
CONC75
INDSIZE
RAW
Adj R
F
DF
Dep. variable
EG 1975
1
Dep. variable
EG 1993
2
7.47***
(3.74)
0.71**
(2.36)
0.15
(0.35)
0.21
(0.10)
5.88
(4.38)
0.62***
(3.13)
0.05
(0.14)
0.18
(0.66)
0.17
(1.37)
0.077
(0.10)
0.50
4.06
54
0.26***
(3.30)
0.21
(0.38)
0.49
8.85
57
Dep. variable
EG 1993
3
3.94**
(2.44)
0.47*
(1.91)
0.08
(0.22)
0.053
(0.21)
0.33**
(2.55)
0.18**
(2.01)
0.23
(0.47)
0.64
8.33
56
Dep. variable
EG 1993
4
3.20
(2.76)***
0.26
(0.61)
0.09
(0.33)
0.17**
(2.10)
0.30
(0.42)
0.39
2.86
57
Dep. variable
GC 1993
5
2.90***
(11.08)
0.25***
(7.22)
0.02
(0.47)
0.03
(0.65)
0.15***
(8.70)
0.01
(0.16)
0.68
9.87
57
Note: ***p\0.01; **p\0.05; *p\0.10. Industry dummies not shown, available upon request.
TABLE 11: REGRESSION RESULTS. SPATIAL CONCENTRATION, CHANGE OVER TIME 197593 AND
LEVEL 1993, ELLISONGLAESER INDEXES (EG) AND GINI-COEFFICIENT
Dep. variablechange in
EG-index 197593
1
Constant
*TECH
*SKILL
*TRA
*INDSIZE
*RAW
CONC75
Adj R2
F
DF
24.61
(0.085)
6.33
(1.02)
1.06
(0.80)
0.017
(0.51)
0.09***
(2.58)
0.01
(0.22)
0.23
2.17
53
2
12.95
(0.042)
7.18
(1.19)
0.27
(0.22)
0.011
(0.30)
1.13
(0.40)
0.90
(0.18)
3,083.58
(1.16)
0.34
0.79
52
EG
4
0.048
0.05
0.01
(1.09)
(1.63)
(0.31)
(0.001**
(0.9 E4*
(2.50)
(1.79)
0.36 E5*
0.2 E4
0.4 E4*
(1.74)
(1.63)
(1.70)
(3.55 E06
2.11 E06
0.00
(0.83)
(0.54)
(0.79)
0.3 E5
0.30 E4
0.2 E4
(0.083)
(0.87)
(0.64)
0.11 E5
0.3 E4
0.2 E4
(0.17)
(0.51)
(0.34)
0.62***
0.69***
(4.67)
(5.32)
0.44
0.59
0.51
9.48
5.56
7.96
53
52
53
Note: ***p\0.01; **p\0.05; *p\0.10. Industry dummies not shown, available upon request.
GC
6
0.36***
(6.77)
0.0003
(1.00)
2.0 E5
(1.12)
9.53 E05
(0.20)
(0.001*
(1.83)
9.99 E05
(0.20)
0.18
1.89
53
59
EG
Skill
Tech
Raw
Tra
Indsize
1
0.06
0.05
0.09
0.01
0.11
Skill
Tech
Raw
Tra
Indsize
1
0.28
0.27
0.35
0.09
1
0.09
0.07
0.33
1
0.01
0.04
1
0.03
concentration in the respective year, either defined as the EG-index or as the locational
Gini-coefficient, calculated for each of the four-digit manufacturing industries in the
70 regions.20 From the correlation matrix, the problems of multicollinearity between
the independent variables seem negligible (Table 12).21
In Table 10, we begin by studying the effects on the level of concentration in 1975
and 1993, using the variables previously defined (regressions 1 and 2). We proceed
by including the EllisonGlaeser coefficients for 1975 as an explanatory variable
(regression 3). In the last regression (regression 4), we drop the TECH variable.
Technology (TECH) is the only one of our core variablestechnology, skill and
trade coststo attain significance and have the expected positive effect on regional
concentration. An increase in the average employment within a plant by one percentage point seems to imply an increase in concentration by approximately 0.470.70
percent. Excluding the TECH variable hardly affects the remaining variables, even
though the overall explanatory value of the regression decreases considerably. As we
apply the GINI-index as the dependent variable (regression 5), the TECH variable
remains significant even though its parametric value diminishes (the effect on the other
independent variables is negligible). We conclude that the TECH variable, defined as
average plant size measured in terms of employees, is likely to be positively associated
with an industrys regional concentration because of labor market effects, such as
access to specific expertise, labor pooling, etc., but scale effects are also likely to
influence location.
It should be noted that the knowledge variable is highly insignificant, albeit it
appears with the expected positive sign in most regressions. Hence, non-pecuniary
linkages, or knowledge spillovers, seem to have a negligible influence on the spatial
concentration of production in this model. Trade costs (TRA), and the variable
designed to pick up a large dependence on raw material (RAW), are both insignificant
and vary in sign.22 The size of the industry (INDSIZE), measured as the industrys
employment in proportion to total manufacturing employment, was the only significant control variable and, as expected, negatively related to spatial concentration.
As we inserted the EG-index in 1975 to control for concentration in the initial year,
it was shown to have a positive impact on regional concentration in 1993 and it is
20 Industry dummy coefficients are available upon request. We have used the White (1980) method to correct for
heteroscedasticity. The Durbin-Watson test indicates no problems of autocorrelation in the estimations.
21 Correlations between the variables in 1975 are approximately the same.
22 Alternatively, we used trade costs in the base year as an explanatory variable, although it had no effect on the
results.
60
61
REFERENCES
Amiti, M. 1998: New trade theories and industrial locations in the EU: a survey of evidence,
Oxford Review of Economic Policy, 14: 4553.
Anselin, L., Varga, A. and Acs, Z. 1997: Local geographic spillovers between university
research and high technology innovations, Journal of Urban Economics, 42: 422448.
Audretsch, D. 1995: Innovation and Industry Evolution. Cambridge, MA and London: MIT
Press.
Audretsch, D. and Feldman, M. 1996: R&D spillovers and the geography of innovation and
production, American Economic Review, 86: 630640.
Audretsch, D. and Stephan, P. 1996: Company-scientist locational links: the case of
biotechnology, American Economic Review, 86: 641652.
Barkely, D. 1988: The decentralization of high-technology manufacturing to non-metropolitan
areas, Growth and Change (Winter): 1430.
Berman, E., Bound, J. and Griliches, Z. 1994: Changes in the demand for skilled labor within
U.S. manufacturing: evidence from the annual survey of manufactures, Quarterly Journal
of Economics, 109: 367398.
Brainard, S. 1993: A simple theory of multinational corporations and trade with a trade-off
between proximity and concentration. NBER WP, No. 4269.
Braunerhjelm, P. and Carlsson, B. 1999: Industry clusters in Ohio and Sweden, 19751995,
Small Business Economics, 12: 279293.
62
63
Markusen, A., Hall, P. and Glasmeir, A. 1986: High Tech America: The What, How, Where
and Why of Sunrise Industries. Boston: Allen & Unwin.
Markusen, J. 1995: Incorporating the multinational enterprise into the theory of international
trade, Journal of Economic Perspectives, 9: 169189.
Marshall, A. 1890: Principles of Economics. London: Macmillan.
Maurel, F. and Sedillot, B. 1999: A measure of the geographic concentration in French
manufacturing industries, Regional Science and Urban Economics, 5.
Midelfart-Knarvik, K.H., Overman, H., Redding, S. and Venables, A. 2000: The location of
European industries. Report prepared for the Directorate General for Economic and
Financial Affairs, European Commission.
Myrdal, G. 1957: Economic Theory and Underdeveloped Regions. London: Methuen.
Porter, M. 1998: On Competition. Boston: Harvard Business School Press.
Puga, D. 1999: The rise and fall of regional inequalities, European Economic Review, 43:
303335.
Saxenian, A. 1994: Regional Networks: Industrial Adaptation in Silicon Valley and Route
128. Cambridge, MA: Harvard University Press.
Statistics Sweden (SCB) 1975, 1993: Data from the Central Register of Enterprises and
Establishments, 1975 and 1993.
rebro.
Statistics Sweden (SCB) 1977: The Annual Report of Manufacturing 1975. O
rebro.
Statistics Sweden (SCB) 1995: The Annual Report of Manufacturing 1993. O
Storper, M. and Walker, R. 1989: The spatial division of labor: labor and the location of
industries, in L. Sawers and W. Tabb (eds.), Sunbelt/Snowbelt: Urban Development and
Regional Restructuring. New York: Oxford University Press.
Sweeney, R. 1987: Innovation, Entrepreneurs and Regional Development. New York:
St Martins Press.
Thomas, M. 1985: Regional economic development and the role of innovation and
technological change, in A. Thwaites and R. Oakley (eds.), The Regional Economic
Impact of Technological Change. New York: St Martins Press.
Tran, D. 1986: Locational factors in the declining industrial competitive advantage of the
New York urban region, Journal of Regional Sciences, 26: 121139.
Varga, A. 1998: Regional Economic Effects of University Research: A Spatial Econometric
Perspective. Dordrecht and Boston: Kluwer Academic Publishers.
Venables, A. 1996: Equilibrium locations of vertically linked industries, International
Economic Review, 37: 4159.
Weber, A. 1909: Theory of Location of Industries (translated 1929). Chicago: University of
Chicago Press.
Wheaton, W. and Shisido, H. 1981: Urban concentration, agglomeration economies, and the
level of economic development, Economic Development and Cultural Change, 3: 1730.
White, H. 1980: A heteroscedastisity-consistent covariance matrix estimator and a direct test
for heteroscedasticity, Econometrica, 48: 817838.