Académique Documents
Professionnel Documents
Culture Documents
Dinglasan
2 RUA
Types of Vernier Calipers
Gear Tooth Vernier Calipers - used to m e a s u r e the
chordal thickness of a gear tooth on the pitch circle
and the distance from the top of the tooth to the pitch
chord (chordal a d d e n d u m ) at the same time.
Veriner
reading
0.02mm
Permissible Error
0.02mm
Parallax-free Plane Vernier Calipers ( Open Vernier) Parallax-free vernier scales for easy and positive
measurement.
Measuring
Veriner
Permissible Error
Range
reading
0-150mm
0.02mm
0.02mm
0-200mm
0.02mm
0.03mm
0-300mm
0.02mm
0.04mm
Carbide-tipped Jaw Type Vernier Calipers (MonoBlock Vernier) - Can measure OD,ID, depth and steps.
Inside and outside carbide-tipped measuring faces.
Inside groove vernier calipers with flat points Facilitate measurement of a diameter of an inside groove
in a smaller hole
18-150
Reading mm:
0.02
Accuracy mm:
0.03