Académique Documents
Professionnel Documents
Culture Documents
FORM 8
(Prescribed Under Rule 56 )
CB. No :11632
Report of Examination of Pressure Vessel or Plant
Name of the Occupier ( of Factory)
:
BANNARI AMMAN SPINNING MILLS
LTD
Situation and Address pf Factory
:
Kovai Sathy Main Road,Kunnathurvill,Ganeshapuram P.O,Coimbatore 641107
5
6
7
8
9
10
11
12
Are the required fittings and appliances provided in accordance with the
Rules
13
Are all fittings and appliances properly maintained and in good condition?
Have the pressure settings been checked and corrected ?
1.Pressure switch
Cut off : 8.0
Cut on : 6.0
2. Safety Valve
open at: 9 above
3.Auto drain open
Once in:
2.8
4. Pressure gauge
Dial range
0 to 25
Red mark at 16
14
15
16
17
Repairs ( if any) required, and period within which they should executed and
any other condition which the person making the examination thinks it
necessary to specify for securing safe working.
Maximum permissible working pressure. Calculated from dimensions and
from the thickness and other data ascertained by the present examination,
due allowance being made for conditions of working if unusual of
exceptionally severe. (State minimum thickness of walls measured during
the examination.
Where repairs affecting the maximum working pressure are required state
the working pressure
(a)Before the expiration of the period specified in (14)
(b)After the expiration of such period if the required repairs have not been
completed
(c )After the completion of the required repairs
Other observations : The functioning of the Safety Valve should be
checked at least once in a week and the some recorded in prescribed
register
Nil
10kg/cm2
kg/cm2
kg/cm2
kg/cm2
Minutes/Sec
kg/cm2
kg/cm2
I certify that on
the pressure vessel or plant described above was thoroughly cleaned and ( so far as its construction
permits ) made accessible for thorough examination and for such tests as were necessary for thorough examination and that on the
said date. I thoroughly examined this pressure vessel or plant. Including its fittings , and that the above is a true report of any
examination.
Signature
Place : Coimbatore
Dated :
Address
: