Académique Documents
Professionnel Documents
Culture Documents
308953
Rev. B
INSTRUCTIONS
11/4
1/8 npt
dispense
outlet
GL-1R Injectors
13/32
mounting
holes
71/16
3/8 npt
(2) supply
inlet/outlet
A
B
Description
Injector, GL-1, one point
Injector, GL-1, two point
Injector, GL-1, three point
Injector, GL-1, four point
Injector, GL-1, five point
Injector, GL-1, replacement
Injector, GL-1, npt single
Dimension A
Dimension B
114911
114912
114913
114914
114915
WARNING
INJECTION HAZARD
Fluid from the injector, leaks, or ruptured components can inject
fluid into your body and cause extremely serious injury, including
the need for amputation. Fluid injected into the skin might look
like just a cut, but it is a serious injury. Get immediate medical
attention. Fluid splashed in the eyes or on the skin can also
cause serious injury. The equipment may be pressurized already,
or it could become pressurized by an automatic lube cycle initiated
by Lubrication Controller (timer). Disconnect power to the timer,
and disconnect the air supply to the pump module to ensure that
the system is depressurized. See the pressure relief procedure in Pump Module manual 308955.
Technical Data
Maximum operating pressure . . . 3500 psi (24 MPa, 241 bar)
Minimum operating pressure . . . 1850 psi (13 MPa, 128 bar)
Suggested operating pressure . . 2500 psi (17 MPa, 172 bar)
Reset pressure . . . . . . . . . . . . . . . . . 600 psi (4.1 MPa, 41 bar)
Output volume per cycle . . . . . adjustable: 0.008 to 0.08 in.3
Wetted parts . . . carbon steel, stainless steel, copper, VitonR
Recommended fluids . . . lubricant N.L.G.I. grade #1 or lighter
Vitonr is a registered trademark of the DuPont Company.
Available Kits
Use Only Genuine Graco Repair Parts
Graco Part No. 115118 . . . . . . . . . . . . . . Metal Injector Cover
Graco Part No. 115119 . . . . . . . . . . . Plastisol Injector Cover
Graco Part No. 115120 . . . . . . . . . . . . . . . . . . . Crossover Kit
(for connnecting the outlets of injectors for increased output)
Graco Part No. 241234 . . . . . . . . . . . . . . . . Injector Repair Kit
(See Kit 241234 parts in Injector Service Parts list.)
GRACO INC.
C3002IE
MINNEAPOLIS, MN
554401441
torque to
3540 ft. lbs.
(4754Nm)
2
3
torque to
3540 ft. lbs.
(4754Nm)
9
18
4
9
18
11
11
12
1/8 npt
12
1
5
1/8 npt
13
5
16
17
13
19
15
6
20
17
19
15
20
Manifold
(not included)
torque to
5055 ft. lbs.
(6874Nm)
16
6
torque to
5055 ft. lbs.
(6874Nm)
8
9062B
9063B
Description
Injector body
Adjusting screw
Lock nut
Packing housing
Zerk fitting and cap assembly
Copper gasket
Adapter bolt
Qty
Part No.
1
1
1
1
1
1
1
114906
114907
114908
114916
114918
114919
114920
3/ -in.
8
npt adapter
Steel gasket
308953
Item
Qty
Part No.
1
1
K
K
13 Compression spring
1
15 Plunger
1
16 VitonR packing
1
17 VitonR packing
1
18 VitonR packing
1
19 Inlet valve
1
20 Flat washer
1
L Included in Injector Repair Kit 241234 only.
K
K
K
K
K
K
K
11
12
Description
VitonR o-ring
Displacement piston
Notes
308953
All written and visual data contained in this document reflect the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Sales Offices: Minneapolis, Detroit
Foreign Offices: Belgium, England, Korea, France, Germany, Hong Kong, Japan
GRACO INC.
MINNEAPOLIS, MN
www.graco.com
PRINTED IN USA 308953 September 1999
308953
554401441