Académique Documents
Professionnel Documents
Culture Documents
Product Description
FEATURES
Table of Contents
Characteristics........................................ 2
Flux Characteristics................................ 3
150C
Temperature............................................ 4
Electrical Characteristics........................ 5
White)....................................................... 6
thermal path.
30C/85% RH
Reflow solderable - JEDEC
JSTD020C
(Cool White)............................................. 6
Relative Chromaticity vs. Current
(Warm White).......................................... 7
(Warm White).......................................... 7
UL recognized component
(E349212)
Thermal Design....................................... 8
Notes..................................................... 10
Mechanical Dimensions....................... 12
lighting,
indoor
powered lighting.
www.cree.com/Xlamp
lighting
and
solar-
Packaging.............................................. 14
Copyright 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and XLamp are
registered trademarks and the Cree logo is a trademark of Cree, Inc. UL and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Characteristics
Characteristics
Unit
C/W
2.5
degrees
125
mV/C
-2.1
Minimum
Typical
Maximum
8000
mA
3000
Reverse voltage
2.9
3.1
3.35
DC forward current
3.5
150
Copyright 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and XLamp are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL and the UR logo are registered trademarks of UL LLC.
Color
CCT Range
Min.
Cool White
5000 K
Max.
8300 K
Neutral White
3700 K
5000 K
80-CRI White
2600 K
4300 K
Warm White
2600 K
3700 K
85-CRI White
90-CRI White
2600 K
2600 K
3200 K
3200 K
Calculated Minimum
Luminous Flux (lm)*
Order Code
Group
Flux (lm)
1000 mA
1500 mA
2000 mA
T5
260
360
511
643
XMLAWT-00-0000-0000T5051
T6
280
388
551
692
XMLAWT-00-0000-0000T6051
U2
300
416
590
742
XMLAWT-00-0000-0000U2051
T4
240
332
472
593
XMLAWT-00-0000-000LT40E4
T5
260
360
511
643
XMLAWT-00-0000-000LT50E4
T2
200
277
393
494
XMLAWT-00-0000-000HT20E7
T3
220
305
433
544
XMLAWT-00-0000-000HT30F7
T2
200
277
393
494
XMLAWT-00-0000-000LT20E7
T3
220
305
433
544
XMLAWT-00-0000-000LT30F7
S4
164
227
323
406
XMLAWT-00-0000-000PS40E7
S5
172
238
338
425
XMLAWT-00-0000-000PS50E7
S6
182
252
358
450
XMLAWT-00-0000-000PS60E7
S4
164
227
323
406
XMLAWT-00-0000-000US40E7
S5
172
238
338
425
XMLAWT-00-0000-000US50E7
S6
182
252
358
450
XMLAWT-00-0000-000US60E7
Notes:
Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on
CRI measurements. See the Measurements section (page 10).
Typical CRI for Cool White (5000 K 8300 K CCT) is 65.
Typical CRI for Neutral White (3700 K 5000 K CCT) is 75.
Typical CRI for Warm White (2600 K 3700 K CCT) is 80.
Minimum CRI for 80-CRI White is 80.
Minimum CRI for 85-CRI White is 85.
Minimum CRI for 90-CRI White is 90
* Calculated flux values are for reference only.
Copyright 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and XLamp are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL and the UR logo are registered trademarks of UL LLC.
100
80
60
40
20
380
430
480
530
580
630
680
730
780
Wavelength (nm)
80%
70%
60%
50%
40%
30%
20%
10%
0%
25
50
75
100
125
150
Copyright 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and XLamp are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL and the UR logo are registered trademarks of UL LLC.
Electrical
Characteristics (Tj =(T25C)
Electrical
Characteristics
= 25C)
J
3000
2800
2600
2400
2200
2000
1800
1600
1400
1200
1000
800
600
400
200
2.0
2.2
2.4
2.6
2.8
3.0
3.2
3.4
3.6
300%
275%
250%
225%
200%
175%
150%
125%
100%
75%
50%
25%
0%
200
400
600
800
1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000
Copyright 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and XLamp are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL and the UR logo are registered trademarks of UL LLC.
Cool White
0.020
0.015
0.010
0.005
CCx
0.000
CCy
-0.005
-0.010
-0.015
-0.020
500
1000
1500
2000
2500
3000
Current (mA)
Cool White
0.020
0.015
0.010
0.005
CCx
0.000
CCy
-0.005
-0.010
-0.015
-0.020
25
50
75
100
125
150
Tsp (C)
Copyright 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and XLamp are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL and the UR logo are registered trademarks of UL LLC.
Warm White
0.020
0.015
0.010
0.005
CCx
0.000
CCy
-0.005
-0.010
-0.015
-0.020
500
1000
1500
2000
2500
3000
Current (mA)
CCx
0.000
CCy
-0.005
-0.010
-0.015
-0.020
25
50
75
100
125
150
Tsp (C)
Copyright 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and XLamp are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL and the UR logo are registered trademarks of UL LLC.
80%
60%
40%
20%
-100
-80
-60
-40
-20
0%
20
40
60
80
100
Angle ()
Thermal Design
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
Thermal
Design
and optical characteristics.
3500
3000
2500
2000
1500
Rj-a = 4 C/W
1000
Rj-a = 7 C/W
Rj-a = 10 C/W
500
Rj-a = 15 C/W
0
20
40
60
80
100
120
140
160
Copyright 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and XLamp are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL and the UR logo are registered trademarks of UL LLC.
tP
TP
Critical Zone
TL to TP
Temperature
Ramp-up
TL
tS
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
t 25C to Peak
Profile Feature
Average Ramp-Up Rate (Tsmax to Tp)
Time
Lead-Free Solder
1.2C/second
120 C
170 C
65-150 seconds
217 C
45-90 seconds
235 - 245 C
20-40 seconds
Ramp-Down Rate
1 - 6 C/second
4 minutes max.
Note: All temperatures refer to the topside of the package, measured on the package body surface.
Copyright 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and XLamp are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL and the UR logo are registered trademarks of UL LLC.
Notes
Measurements
The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely
represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors
that are not within Crees control and are not intended or provided as operational specifications for the products. Calculated values are
provided for informational purposes only and are not intended as specifications.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Crees lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XM-L LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in
conditions of 30 C/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs
in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Documentation sections of www.cree.com.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon request.
Copyright 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and XLamp are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL and the UR logo are registered trademarks of UL LLC.
10
Notes - Continued
UL Recognized Component
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/
UL 8750.
Vision Advisory
WARNING: Do not look at exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer
to the LED Eye Safety application note.
Copyright 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and XLamp are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL and the UR logo are registered trademarks of UL LLC.
11
Mechanical Dimensions
6
NOTICE
6
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
NOTICE
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO
ANY
CONTAINED
WITHIN ARE THE PROPRIETARY AND
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN
CONSENT INFORMATION OF CREE, INC. THIS PLOT
CONFIDENTIAL
OF CREE INC.
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
OF CREE INC.
1
REVISONS
REV
DESCRIPTION
NEW RELEASE
REV
B
All measurements are .13 mm
unless otherwise
indicated.
D
3.02 WAS 3.09
C
E
D
D
.50
0.73
5.00
.50
4/15/10
10/22/1
DC
11/18/10
NE
CHANGED SOLD
4.78
3.78
2.78
3.02
5.00
DC
DDS
DATE
Ad
1/5/11
DC
ADDED DIMENSI
10/23/1
DC
3.
11/15/1
DC
ADDED
6/16/15
DC
CORRECTE
4.78
3.78
3.02
BY
2.78
.50
0.73
.50
5.00
4.78
5.00
C
C
R2.26
Top View
Side View
Bottom View
R2.26
4.78
4.78
.50
.50
.80
.50
.50
.50
.50
.80
.25
.25
.80
.80
B
B
4.78
4.78
4.78
4.78
.25
.25
.97
2.78
4.78
2.78
Recommended PCB
A
RECOMMENDED PCB
SOLDER PAD
.97
ALL DIMENSIONS ARE
4.78
DRAWN BY
.25
APPROVED
.XXX
.125
-X
.5
THIRD ANGLE PROJECTION
MATERIAL
FOR SHEET METAL PARTS ONLY
.X
1.5
THIRD ANGLE PROJECTION
.XX
.75
.XXX
.25
FINAL PROTECTIVE FINISH
X
.5
--
SURFACE FINISH:
5
6
4
5
--
1.6
3
4
.13MM UNLES
DATE
04/9/10
DRAWN BY
DATE
.25
.XXX
.125
X
.5
D. CRONIN
460
Du
Pho
Fax
CHECK
--
SIZE
SURFACE FINISH:
APPROVED
--
DRAWING NO.
1.5
.XX
.75
SCALE
.XXX
.25
16.000
X
.5
1.6
MATERIAL
2610-0000
--
SHE
FINAL PROTECTIVE FINISH
-2
Copyright 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and XLamp are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL and the UR logo are registered trademarks of UL LLC.
12
2.00[.079]
4.00[.157]
2
REVISIONS
NOTICE
EE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
NTAINED WITHIN ARE THE PROPRIETARY AND
NFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
Y NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
AUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
CREE INC.
DESCRIPTION
REV
BY
DATE
APP'D
POCKET SIZE
+.10
+.0039
.0591
-.00
-.0000 [ ]
Do1.50
P2
1.75[.069]
E1
Po
Ao -
5.40mm [.213"]
Bo -
5.40mm [.213"]
Ko -
3.35mm [.132"]
3.0
5.40[.213]
Bo
3
12.00[.472] Component Handling Systems Standard.
All Cree carrier tapes conform to EIA-481D,
Automated
6
5
4
5.50[.217]F
6
NOMINAL
NOTICE
CREE CONFIDENTIAL. THIS PLOT
AND THE INFORMATION
NOTICE
CONTAINED
WITHIN ARE THETHIS
PROPRIETARY
ANDINFORMATION
CREE CONFIDENTIAL.
PLOT AND THE
CONFIDENTIAL
INFORMATION
CREE,
INC. THIS PLOT
CONTAINED
WITHIN AREOF
THE
PROPRIETARY
AND
MAY NOT
BE COPIED, INFORMATION
REPRODUCEDOF
ORCREE,
DISCLOSED
TO PLOT
ANY
CONFIDENTIAL
INC. THIS
UNAUTHORIZED
PERSON
WITHOUT
THE WRITTEN
CONSENT
MAY NOT BE COPIED, REPRODUCED
OR DISCLOSED
TO ANY
OF CREE
INC.
UNAUTHORIZED
PERSON WITHOUT THE WRITTEN CONSENT
OF CREE INC.
REV
12.30 [.484]
MAX
W
10.25
[.404]
E2
2.00[.079]
2.00[.079]
P2
1.50[.059]
4.00[.157]
D1
4.00[.157]
Po
8.00[.315]
P
REVISIONS
REVISIONS
DESCRIPTION
DESCRIPTION
NOTICE
NTIAL. THIS PLOT AND THE INFORMATION
THIN ARE THE PROPRIETARY AND
INFORMATION OF CREE, INC. THIS PLOT
OPIED, REPRODUCED OR DISCLOSED TO ANY
D PERSON WITHOUTTHE WRITTEN CONSENT
5.40[.213]
3.0
A
B
Ao
.5
FOR SHEET METAL PARTS ONLY
.X
.06
.XX
.03
.XXX
.010
X
.5
SURFACE FINISH:
8
6
BY
DATE
DDS
11/8/10
DC
2/26/12
BS
8.00[.315]
DATE
8.00[.315]
P TITLE
P
APPROVED
SIZE
Loaded Pockets
(1000 Lamps)
REV.
DRAWING NO.
2402-00011
7.0
SCALE
DRAWING SCALE
2
SHEET
7.0
A
OF
4
1.75
3.35[.132]
3.35[.132]
3
Ko
Ko
START
12
.36[.014] D
T .36[.014]
T
MATERIAL
5.40[.213]
5.40[.213]
Ao
ANODE SIDE
1.50[.059]
Phone (919) 313-5300
Fax (919) 313-5558
D1 1.50[.059]
D1
3.35
2
2400-00009
QTY
ITEM
2400-00009-CORE
DRAWN BY
COMMENTS
DATE
.01
.XXX
.005
APPROVED
DATE
TITLE
X
.XXX .5 .005
THIRD ANGLE PROJECTION
MATERIAL
X PARTS
.5
.03 .06
DRAWING NO.
SIZE
FINAL PROTECTIVE FINISH
.03
empty pockets with
.XXX .XX
.010
FINAL PROTECTIVE FINISH
X
.XXX .5 .010
at least 100mm
SCALE
X
.5
SURFACE FINISH: 63
SCALE
sealed by tape
DRAWING
SCALE
SURFACE FINISH: 63
DRAWING SCALE
Ao
C
4600 Silicon Drive
Durham,
N.C
27703
4600
Silicon
Drive
Durham,
N.C 27703
Phone (919)
313-5300
Phone
(919) 313-5300
Fax (919)
313-5558
Fax (919) 313-5558
XMXM
5050
CARRIER
TAPE
5050
CARRIER
TAPE
2402-00011
A
2402-00011 A
REV.
SHEET
OF
SHEET
1OF / 1
REV.
1 /1
12.4
+.2
.0
MEASURED AT HUB
330
+.25
-.75
16.4
+0.2
.0
MEASURED AT HUB
.5
FOR SHEET METAL PARTS ONLY
.X
1.5
.XX
.75
.XXX
.25
X
.5
SURFACE FINISH:
1.6
1.9.4
DATE
DRAWN BY
D. CRONIN
CHECK
21 .4
06/08/10
DATE
--
--
DATE
APPROVED
--
--
MATERIAL
TITLE
13.1 .2
--
SIZE
--
SCALE
XM LOADING SPEC
REV.
DRAWING NO.
2402-00012
SHEET
3.000
B
OF
1 /1
12.4
+1.0
-.5
MEASURED AT EDGE
60
60
REVISONS
REV
DESCRIPTION
BY
DATE
APP'D
Copyright 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and XLamp are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL and the UR logo are registered trademarks of UL LLC.
UNLESS OTHERWISE SPECIFIED
DRAWN BY
1 /1
APP'D
4/23/10
DATE
CATHODE SIDE
4
Trailer
160mm (min) of
empty pockets
sealed with tape
(15 pockets min.)
D. CRONIN
CHECK
DATE
DRAWN BY
63
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTANED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
OF CREE INC.
END
APP'D
DATE
APP'D
5.40[.213]
5.40[.213]
Bo
Bo
3.0
12.00[.472]
12.00[.472]
NOMINAL
NOMINAL
REVISONS
[.484]
10.25 12.30DESCRIPTION
12.30
[.484]
MAX
Loaded pocket
count was 750
[.404]10.25
MAX
[.404]
WANODE
E2
MADE CATHODE AND
W NOTE LARGER
E2
REV
3.35[.132]
Ko
5.50[.217]F
5.50[.217]F
BY
DATE
BoBo
- - 5.40mm
[.213"]
5.40mm
[.213"]
KoKo
- - 3.35mm
[.132"]
3.35mm
[.132"]
7.0
BY
POCKET
SIZE
POCKET
SIZE
AoAo
- - 5.40mm
[.213"]
5.40mm [.213"]
1.75[.069]
E1 1.75[.069]
E1
.36[.014]
T
Po
REV
+.10
+.0039
Do1.50
.0591
+.0039
-.00 +.10 .0591
-.0000
[]
Do1.50
-.00
-.0000 [ ]
P2
.5
D. CRONIN
CHECK
DATE
09/29/09
13
DATE
-APPROVED
-MATERIAL
--
DATE
--
TITLE
Packaging
Humidity Indicator
Card (inside bag)
Dessicant
(inside bag)
Unpackaged Reel
Packaged Reel
Vacuum-Sealed
Moisture Barrier Bag
Label with Cree Order Code,
Quantity, Reel ID, PO #
Boxed Reel
Patent Label
Patent Label
Copyright 2010-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and XLamp are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL and the UR logo are registered trademarks of UL LLC.
14