Académique Documents
Professionnel Documents
Culture Documents
Shivkumar V. Gule
(Piping Design Engineer/Plant Design)
Email: shivkumar.gule@lntsnl.com
shivkumargule@gmail.com
CAREER OBJECTIVE:
Looking forward a highly challenging, knowledge gaining and growth oriented career in Plant Design &
Detail Engineering aspects of Power plant, Petrochemical, Oil & Gas Industry.
EDUCATION:
Completed Diploma in Mechanical Engg. In August 2005, from The M S University of Baroda, Gujarat.
With 64% (First class).
Higher Secondary (12th Std. Science) from Gujarat State Examination Board in March 2002, with 53%.
Secondary Examination (10th Std.) from G.S.E.B. in March 2000, with 78%.
PROFICIENCIES:
Total 10 years and 11 months of Post Qualification Experience Consists of conceptual and detailed
physical design of the power plants in Mechanical Plant Design Group.
Well versed with Plot plan, Site layout, Equipment Layout, General Arrangement Drawings, Composite
Drawing, Piping Layout, Piping Isometric, Pipe Support Engineering and Vendor Drawing Review.
Routing various piping system in 3-D Environment as well as 2-D Environment for Coal based as well as
Gas based power plants.
Conceptualization and detail physical design for Piping System and pipe support engineering with
Material take off preparation.
Completed 9 Months of Deputation for Fossil plant design at Sargent & Lundy LLC, Chicago, USA
Trained on PDMS software for piping work, Equipment modeling, MDS by AVEVA team.
Deputed at IOCL PANIPAT Project Site for Piping/Physical Design Engineering supports to site.
SOFTWARE PROFICIENCIES:
Computer Aided Design Model Server (CADMS) for interference as well as model activity
Microsoft Office
Planning and preparation of Mechanical deliverables drawings required for conceptual and detailed
physical design of the power plants
Planning and Development of plot plan, Site layout, equipment layout, Composite Drawings & General
Arrangement drawing.
Conceptualization and detail design of Piping Layout, Piping Isometric and Pipe Support Design.
Responsible for piping interferences/discrepancy check with P&ID and vendor drawings and resolved it if
any.
Review of Piping Isometrics, Pipe supports, Plot plan, General Arrangement Drawings, Composites
drawings, etc.
Interface Engineering
Training of Engineers
Interdisciplinary Co-ordination.
Working as a Physical Design Lead, Responsible for the integration of physical design across all
disciplines, vendor drawing review and integration into plant 3D model.
Work includes piping design/plant design activity. Responsible for Planning and preparation of piping
deliverables drawings required for conceptual and detailed physical design of the power plants including
power cycle and BOP systems.
Responsible for design and coordinator for conceptual and detail design of critical and non-critical piping.
Responsible for design and coordinator for conceptual and detail design of critical and non-critical Pipe
Supports.
Working as a Reviewer of Isometric drawings, support drawings and IDR and VDR.
Looking into details of Plot plan drawing as well as Turbine building & other general arrangement
drawing.
4)
Koradi TPS Expansion Project 3 x 660 MW (Unit: 8, 9 & 10), KORADI, MAHARASHTRA.
Responsible for LB critical piping layout planning and routing e.g. Main steam , Cold reheat, Hot reheat
and Extraction steam system as well as non-critical system e.g. Condense air removal system , Hater drain
and vent system.
Responsible for support configuration and conceptual design of MS, CR, HRH and Extraction steam
system.
Worked as a Reviewer of Isometric drawings, support drawings and IDR and VDR.
Looking into details of Plot plan drawing as well as Turbine building general arrangement drawing.
(Worked as a piping designer in S&L Chicago, as a part of USA Deputation period of 9 months)
Worked on Support designing for various Systems of FRP Piping and Steel Piping.
Routed Various Piping Systems for Unit-1 & Unit-2 of FRP and Steel Piping.
6) 192.7 MW Combined cycle Power Plant, Naphtha Cracker Project of IOCL Location: Panipat,
Customer: I.OC.L. (Owner Consultant: - Engineers India Limited)
Modeling of SHP BFP spray system and Condensate spray system piping, which are provide service to
various control valves and deaerator super heater.
Responsible for above ground piping like, PHE and CW pumps inter connecting piping, CW, CCW, ACW
piping etc. and isometric generation.
Responsible for above ground drain piping like steam tracing and drain system.
U/G Piping layout planning and routing for the same and development of Under Ground piping composite
drawings.
Done cooling tower, pump piping and CEP discharge spray system piping.
7) 5x113 MW Open cycle, Niger Delta Power Holding Company. Location: NIGERIA. Customer:
TOSHIBA.
Prepared General Arrangement Drawing for Gas turbine (GE FR.9) Building
As built drawings
M/s. Larsen & Toubro Sargent & Lundy Limited, Vadodara, Gujarat India.
L&T Sargent & Lundy Ltd. is a joint venture of two leading organizations (Larsen & Toubro
Limited, India and Sargent & Lundy LLC, U.S.A.) This Design Engineering Center of Excellence
Provides Engineering expertise for Design of Power Plants.
PLADES:
It is in-house developed 3-D software by Sargent & Lundy LLC, U.S.A similar to PDS/PDMS.
All the disciplines work on single plant 3D model which eliminate mismatch between interdisciplinary
physical drawings and resulting in construction errors/delays.
It is a central database system from where all physical and logical data extracted for project purpose.
PERSONAL ATTRIBUTES:
Good Communication, Analytical and Co-ordination Skills. Capable of working in a team and
maintaining high team spirit and good rapport with everyone in the team. Capable of handling multiple
tasks efficiently. Good software knowledge provides a big boost to my design skills.
PERSONAL DETAILS:
Name
Birth Date
Passport no.
: G7403139
Sex
: Male
Marital Status
: Married
Language Known
Hobbies
Contact Detail
(M) +91-9978-969717
Email:
shivkumar.gule@lntsnl.com
shivkumargule@gmail.com
DECLARATION:
I do hereby declare that all the information given by me is true to the best of my knowledge and belief.
Dated: 26th July, 2016
Thanking You
Shivkumar V. Gule