Académique Documents
Professionnel Documents
Culture Documents
A proper treatment procedure requires the patient monthly control in the first
5 luni.Controls have the sole purpose of using the device for an appropriate
period of time and each representing a step .
Every control measurements must be made of overbite, overjet, temporo
mandibular joint .Usually in less serious cases full correction is performed in
5 months in more serious cases, it can reach up to 10 months of active
implementation .After the first 5 controlled patient coming months to 2
months
CASE PRESENTATION:
Diagnosis: Class 2 Division 1 normodivergent Angle with reduced
length of the mandibular body, xi Pm -reduced.
Before treatment overbit
and overjet were grown and as I cross bite with mandibular deviation in PIM
The treatment objective: a Guide Occlus device solved the
problem by correctingtransverse dimension to the upper
jaw and a valid functional jaw position, the overjet correction and overbit
has avoided hiperfunction upper and lower incisor groupwhile
also eliminating interference myofunctional
Results: At the end of treatment highlights a situation Dental
and skeletal class 1Angle.