Académique Documents
Professionnel Documents
Culture Documents
Turbin uap merupakan suatu penggerak mula yang mengubah energi potensial uap
menjadi energi kinetik dan selanjutnya diubah menjadi energi mekanis dalam bentuk
putaran poros turbin.
The steam turbine is a first mover that converts potential energy into kinetic energy of
steam and then converted into mechanical energy in the form of rotation of the turbine shaft.
Turbin uap adalah suatu penggerak mula yang mengubah energi potensial menjadi
energi kinetik dan energi kinetik ini selanjutnya diubah menjadi energi mekanik dalam
bentuk putaran poros turbin.
The steam turbine is a first mover that converts potential energy into kinetic energy
and kinetic energy is then converted into mechanical energy in the form of rotation of the
turbine shaft.
Poros turbin langsung atau dengan bantuan elemen lain, dihubungkan dengan
mekanisme yang digerakkan.
The turbine shaft directly or with the aid of other elements, connected by a mechanism
actuated.
Tergantung dari jenis mekanisme yang digerakkan turbin uap dapat digunakan pada
berbagai bidang industri, seperti untuk pembangkit listrik.
Depending on the type of steam turbine-driven mechanism that can be used in various
industrial fields, such as for electricity generation.
Water into the boiler and the boiler is heated using steam pressure and steam heat
from entering into the rotor rotating
Air masuk ke dalam ketel uap lalu dipanaskan menggunakan boiler sehingga uap panas
yang bertekanan dan uap panas masuk ke rotor memutar
The turbine shaft, directly or with the help of reduction gears, connected by a
mechanism that will be moved.
Poros turbin, langsung atau dengan bantuan roda gigi reduksi, dihubungkan dengan
mekanisme yang akan digerakkan.
Then get into the hot steam condenser to be cooled
Lalu uap panas masuk ke condensor untuk didinginkan
Atau disebut juga Emergency Stop Valve karena berfungsi untuk mengisolasi turbin
dari supply uap air pada keadaan darurat untuk menghindari kerusakan atau juga
overspeed.
Or also known as the Emergency Stop Valve because it serves to isolate the steam
turbine from the water supply in case of emergency to avoid damage or also overspeed.
Serves to control the supply of water vapor into the turbine in accordance with control
systems that rely on large electrical loads.
3. Turning Device
Adalah suatu mekanisme untuk memutar rotor dari turbin pada saat start awal atau
pada saat setelah shut down untuk mencegah terjadinya distorsi/bending akibat dari proses
pemanasan atau pendinginan yang tidak seragam pada rotor.
3. Turning Device
Is a mechanism to rotate the rotor of the turbine at start early or on time after shut
down to prevent distortion / bending as a result of heating or cooling process that is not
uniform in the rotor.