Académique Documents
Professionnel Documents
Culture Documents
A Portrait
PROVEN QUALITY
CEO
COO
Alignment Systems
Laser measurement systems
and services for optimum
alignment of machines and
systems.
Condition Monitoring
Vibration measurement
systems for machine
condition monitoring
including services such as
machinery fault diagnosis.
Nondestructive Testing
Systems and services for
quality assurance and process
control in production.
Alignment Systems
Everything for smooth running
Monitoring of
positional changes
Shaft alignment
Alignment of bores
and bearing shells
Roll parallelism
measurement
ALIGNMENT CENTER
PC-Software
Condition Monitoring
The low-vibration machine is the better machine
Measuring systems
for every requirement
specialists for every
challenge:
Optimal production and
smooth processes are only
possible when machines
run without vibration.
The identification of
problematic machine
conditions and more
importantly the
elimination of their
causes is the business of
the Condition Monitoring
Division. We provide
innovative analysis systems
and specialists experienced
in this field.
Machine protection
systems
To ensure productivity
where online monitoring
systems do not yet appear
cost-effective, machine
protection systems are
indispensable.
Online continuous
monitoring systems
Permanently installed
measuring systems monitor
machines critical to
production around the
clock. Fault messages are
automatically sent to the
operator by E-Mail or SMS.
Certified monitoring of
wind turbines
Telediagnosis of marine
and industrial systems
Temporary telediagnosis
services (TTS)
Evaluation services (CPC)
Load measurements
(torque, bending moment,
load distribution)
Natural vibration and
noise analyses
Consultation & training
24-hour Service
Nondestructive Testing
Only detected faults can be prevented
Tube mills
Tube manufacturers use
NDT devices coupled with
a variety of sensors for
tube leakage testing. The
testing method meets the
requirements of recognized
international standards.
Wire production
Wire drawing lines and
recoiling plants employ eddy
current testing together with
rotating systems, which excel
in the reliable detection of
longitudinal defects and
grooving.
Bar mills
Producers of high quality
steel bar rely on the latest
NDT product, a magnetic
flux leakage tester, for
detecting very small cracks
and imperfections on black
and bright steel bar.
Manufacture of
formed parts
NDT testing equipment
checks cold heading wire
before it enters a cold
former, without interrupting
the production process.
After forming, the defective
parts are automatically
sorted out.
10
We are proud of
The PRUFTECHNIK Group employs 500 employees worldwide on whose commitment and know-how the high
quality of our products and services rests.
We are proud to present the new measurement laboratory
which features a unique set of technical specifications the
granite measurement table and the 11 meter measurement
bench together with their foundation tip the scale at 66 tons
with the sole purpose of ensuring the high precision of our
measurement systems.
Certificates
Patents/
trademarks
Quality
management
Awards
Certificates
Approval
of Air Carrier
Security Programs
11
Sales partners
Headquarters
Our customers in Germany
and Austria are supported by
12 regional sales offices.
India
PRUFTECHNIK-AIMIL
Technical Services (JV)
New Delhi
Italy
PRUFTECHNIK s.r.l.
Cesano Boscone (MI)
Canada
PRUFTECHNIK Maintenance
Technology Service Inc.
Montral
Japan
PRUFTECHNIK K.K.
Tokyo
China
PRUFTECHNIK Shanghai
Shanghai
Poland
PRUFTECHNIK WIBREM sp. z o.o.
Wrocaw
France
PRUFTECHNIK S.A.R.L.
PetiteFort
Russia
OOO PRUFTECHNIK
Saint Petersburg
Spain / Portugal
PRUFTECHNIK, S.L.
Sant Just Desvern (Barcelona)
Thailand
PRUFTECHNIK S.E.A. Thai Office
Bangkok
Turkey
PRUFTECHNIK Ltd. ti.
Istanbul
Middle East / Gulf region
PRUFTECHNIK Middle East FZE
Dubai
USA
PRUFTECHNIK Inc.
Blackwood, NJ (Philadelphia)
Alignment Systems
Laser measurement systems
and services for optimum
alignment of machines and
systems.
Approval
of Air Carrier
Security Programs
Condition Monitoring
Vibration measurement
systems for machine
condition monitoring
including services such as
machinery fault diagnosis.
Nondestructive Testing
Systems and services
for quality assurance
and process control in
production.
pruftechnik.com
PROVEN QUALITY
Made in Germany
Global Presence
Qualified Support
Quality Service
PT 99.401.04.13.en
OPTALIGN, ROTALIGN, SHAFTALIGN, ALIGNEO, INCLINEO, smartALIGN, AXALIGN, PARALIGN, LEVALIGN, pocketALIGN, NOVALIGN, BORALIGN, PERMALIGN, CENTRALIGN, EDDYTHERM,
CSDchek, HYDRALIGN, LAMIBLOC, PERMABLOC, VIBROTIP, VIBSCANNER, VIBXPERT, VIBCODE, VIBREX, VIBROWEB, VIBNODE, VIBRONET, VIBROTECTOR, TIPTECTOR, TIPTREND,
WEARSCANNER, OMNITREND, EDDYCHEK and NOVAFLUX are registered trademarks of PRFTECHNIK Dieter Busch AG. No copying or reproduction of this information, in any form whatsoever, may
be undertaken without express written permission of PRFTECHNIK Dieter Busch AG. The information contained in this leaflet is subject to change without further notice due to the PRFTECHNIK policy
of continuous product development. PRFTECHNIK products are subject to patents granted or pending throughout the world. ISO 9001:2008 certified.
Copyright 2015 by PRFTECHNIK Dieter Busch AG.