Académique Documents
Professionnel Documents
Culture Documents
Contacting Thomson:
contact.support@thomson-networks.com
1. Unpacking
1RU Devices
Description
Power cords
CD-ROM
Certificate of conformity
VGA
output*
Serial/
COM
port*
Optional board D
(network) or E (SDI)
Network connectors
4 to 1
USB
Optional
Power
ports* redundant power
supply
supply unit
connectors
* not used
iLO
port*
If the front panel is not already mounted on the server, refer to the user manual for instructions.
IN1
IN2
IN3
IN4
q
w
e
r
1RU
6RU
10RU
Mains voltage
Mains type
50 Hz to 60 Hz
50 Hz to 60 Hz
50 Hz to 60 Hz
Maximum
input current
9 A at 120 VAC
6.1 A at 230 VAC
Isolation class
E
IN9 IN10 IN11 IN12
q
w
w
e
1RU Devices
q
w
e
Connect all the servers of the ViBE VS7000 cluster via their
interface #1 to a switch that is isolated from the network.
Check that:
- All nodes present in the device are displayed in the
list in the GUI.
- The status of each node is OK.
F
F
Login: admin
Password: admin
rSet the Data 1 (interface X3 on 6RU and 10RU devices) network on your data network:
- If there are n nodes in the system, you need n consecutive addresses.
- Set the following parameters:
- Address
- Mask
- Gateway (optional)
- First address: first address of the n consecutive addresses
Click Apply.
1RU Devices
w
e
r
t
*46073041AJ*
rConnect
t
interface #2 to your
control-command network.
Connect interface #3 to the data
network.
F
F
Login: admin
r
t
Click Apply.
Password: admin
4. Launching a Job
The VS7000 equipment is delivered with a set of predefined workflows. To use them, proceed as follows:
A. Launching a Job
The list of parameters that you must set to create the job is displayed.
Once the job is created, use the Jobs view to monitor your jobs.
Address of the equipment
The job is displayed in the Jobs list. Check its status and its state.
Snap
-shot
view
Main area
w
w
Select the
categories in
the tree.
Logs panel
Status bar
Select a workflow
from the list.
To power down the device, press and release the Power On/Standby
button.
This method initiates a controlled shutdown of applications and the OS.
6. Documentation
r
r
*46073041AJ*