Académique Documents
Professionnel Documents
Culture Documents
Product Description
The multiband tower mounted amplifier (MTMA) is a low-noise amplifier installed near the antenna to
satisfy the co-siting purposes. It helps to improve the signal-to-noise ratio and enhance the receiving
sensibility of the BTS system. It enhances the uplink coverage and improves uplink and downlink imbalance
of the base station. It effectively reduces the transmitting power of cellphones, improves voice and data
communication quality. When scanning the AISG ALD, the MTMA can be operated from one primary
controller, either on NodeB0 or NodeB1 port. When scanning the AISG ALD, the TMA is responding to the
AISG controller with two individual serial numbers (unique IDs) with each their two subunits (two subunits per
frequency band).
Features
High linearity and low noise performance.
Balanced LNA design and power failure bypass for high reliability.
Light weight and compact design.
Designed for co-siting purposes.
Wall mounting and mast mounting.
Built-in lightning protection up to 10 kA.
Support AISG 2.0 protocol.
MTMA-800/E900-12dB-2eNodeBport2ANTport-AISG
Model: ATADU2001 (AISG 2.0)
Tx Specifications
Frequency range (MHz)
Bandwidth (MHz)
791 - 821
925 - 960
30
35
18
Rx Specifications
Frequency range (MHz)
Bandwidth (MHz)
832 - 862
880 - 915
30
35
18 (DC ON)
14 (DC OFF)
Return loss(dB)
Insertion loss in by-pass mode (dB)
Gain (dB)
Noise figure (dB)
12
OIP3 (dBm)
24
Electrical Specifications
DC supply voltage (V)
Operating current per TMA (mA)
(without RET)
9 - 30
@12 V
245 5
@17 V
175 5
@30 V
105 5
Alarm management
AISG
< 3.0
Environmental Specification
-40 ... +65
IP67
MTBF (hours)
> 1,000,000
EMC
10 (8/20 us)
Mechanical Specification
247 x 342 x 132
(without connectors, without brackets)
12.3
Approx. 10.8
8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A,
pin7: DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Mast mounting
MTMA-800/E900-12dB-2eNodeBport2ANTport-AISG
Model: ATADU2001 (AISG 2.0)
Unit : mm
www.huawei.com
Issue: 2014-07-02