Académique Documents
Professionnel Documents
Culture Documents
*Property
Page 1 of
G0023
Name ______________________________________________ Section _____________ Date
____________
2. A portion AOB of the mechanism is actuated by gear D and at the instant shown has a clockwise angular velocity
0f 8 rad/s and a counter clockwise angular acceleration of 40 rad/s2. Determine: a. Tangential force exerted by
gear D and b. Components of the reaction at shaft O.
Solution:
1st Term, SY 20152016
of STI
Pre Finals Examination
*Property
Page 2 of
G0023
Name ______________________________________________ Section _____________ Date
____________
*Property
Page 3 of
G0023
Name ______________________________________________ Section _____________ Date
____________
3. The system is at rest when a moment of M = 6Nm is applied to gear B. Neglecting friction, a) determine the
number of revolutions of gear B before its angular velocity reaches 600rpm, and b) tangential force exerted by
gear B on gear A.
*Property
Page 4 of
G0023
Name ______________________________________________ Section _____________ Date
____________
Solution:
*Property
Page 5 of
G0023
Name ______________________________________________ Section _____________ Date
____________
4.
The system is at rest when a moment of M = 6Nm is applied to gear B. Neglecting friction, a) Apply the method
of impulse, b) Solve the angular momentum equation simultaneously for the unknown time and tangential force.
Solution:
*Property
Page 6 of
G0023
Name ______________________________________________ Section _____________ Date
____________
1. Motion of a rigid body in a plane motion is completely defined by the resultant and moment resultant
about G of the external forces. True
2. The external forces and the collective effective forces of the slab particles are not equivalent.
Equivalent
3. In d Alembert principle, the internal forces acting on a rigid body are equivalent to the effective
forces of the various particles forming the body. External
4. The most general motion of a rigid body that is symmetrical with respect to the reference plane can
be replaced by the sum of translation and centrifugal rotation. Centroidal
5. Most engineering applications involved liquid bodies which are moving under given constraints.
Rigid
*Property
Page 7 of
G0023
Name ______________________________________________ Section _____________ Date
____________
6. Unconstrained plane motion is a motion with definite relations between the components of
acceleration of the mass center and the angular acceleration of the body. Constrained Plane Motion
7. Forces acting on rigid bodies which do not work is a forces applied to fixed points. True
8. In general, small displacements of the particles A and B are not equal but the components of the
displacements along A and B are equal. True
9. Internal forces between particles A and B are equal and opposite which has net work equivalent of
one. Zero
10.For problems involving systems consisting of several rigid bodies, the principle of work and energy
can be applied to each body. True
*Property
Page 8 of