Académique Documents
Professionnel Documents
Culture Documents
spin - PVC
KK 0203.13
Copyright: 2013
Kovinoplastika Lo d.d.,
Lo, Cesta 19. oktobra 57,
SI-1386 Stari trg pri Lou
tel.: +386 1 70 95 100,
fax: +386 1 70 95 553
e-mail: info@kovinoplastika.si,
www.kovinoplastika.si
Manufacturer
spin - PVC
spin - PVC
In 2009, Kovinoplastika
Lo acquired an important
certicate - ISO/TS 16949,
proving appropriate
compliance certication for
implementing appropriate
environmental policy.
Product warranty and liability - turn only, turn & tilt hardware
Tilt
Night vent
Open
Close
spin - PVC
Product warranty and liability - turn only, turn & tilt hardware
3. Product warranty
Kovinoplastika Lo is one of the leading
manufacturers of building hardware in the European Union; the
quality of the companys product is based on a 56-year tradition
in development, production and ensuring quality according to
the acquired ISO 9001: 2000 certicate. We therefore provide
a 3-year warranty, pertaining to building hardware functionality
and surface protection for the ARX building hardware, provided
the instructions in this catalogue, regarding installation and
maintenance of the ARX building hardware, are followed.
We also declare that for the period of 10 years, all the spare
parts of the ARX building hardware can be repaired or replaced
by the experts, provided that the sash and the window frame
or balcony doors have not been damaged. A 10-year period of
providing spare parts or equivalent replacement parts starts
with the beginning of eventual termination of the ARX building
hardware production. Hardware servicing, replacement and
repair services, repair time and travel expenses, arising from
ensuring the above mentioned services are payable according
to the price list of services, provided by Kovinoplastika Lo
d.d. The hardware structure may only consist of the hardware
elements from the ARX building hardware programme. In case
of inappropriately performed hardware installation and/or
inappropriate use of non-original additional parts, which have
not been conrmed by the manufacturer, the latter assumes no
responsibility. In order to xate the hardware professionally,
Implementation regulations for the xing of supporting hingesided hardware components must be followed.
spin - PVC
Product warranty and liability - turn only, turn & tilt hardware
5. Product maintenance
*UHDVLQJDQGIXQFWLRQDOFRQWURORIDOOWKHPRYDEOHSDUWVDQGDOO
the locking points of the turn-only and tilt&turn hardware. The
use of the ARX grease is highly recommended,
RQO\WKHFOHDQLQJDQGPDLQWHQDQFHDJHQWVZKLFKGRQRW
reduce the anti-corrosion hardware protection, may be used.
Hardware a particularly in the vicinity of the pivot rest and the
scissor-stay, as well as replacement parts and the unhinging &
hinging of the active sash must be provided by highly-qualied
experts. In case of surface treatment for windows and balcony
doors (e.g. varnishing), all the hardware components must be
excluded from treatment; they must also be protected against
potential contamination, caused by surface treatment.
5.1 Maintaining the quality of surface treatment
In normal climate, the hot-dip galvanized coating is not
damaged by corrosion, as long as condensed water is not
produced in hardware parts or if the condensed water quickly
dries up.
In order to maintain long-lasting quality of surface treatment
and prevent adverse corrosion eects, the instructions below
must be followed:
+DUGZDUHDQGZLQGRZUHEDWHVPXVWEHWKRURXJKO\DLUHG
(particularly during the construction phase) by making sure
that the elements mentioned are not exposed to moisture and
condensed water,
KDUGZDUHPXVWEHSURWHFWHGDJDLQVWDQ\FRYHUVRU
contamination with building materials (e.g. roughcast, dust,
cement and the like),
DJJUHVVLYHYDSRXUVLQWKHZLQGRZUHEDWHHJIRUPLFDFLG
and acetic acid, ammonia, amino- and ammonium compounds,
aldehyde, phenol, tannic acid etc.) may quickly lead to corrosion
of hardware components in combination with a small amount
of condensed water; in case of aggressive vapours, thorough
airing of rebates on the windows and balcony doors must be
provided; this is particularly important for windows and balcony
doors made of oak and other types of wood, containing a large
amount of tannic acid,
JDVNHWVZLWKDFHWLFDFLGRUDFLGLFQHWVWUXFWXUHRUJDVNHWV
containing the above mentioned ingredients must not be
used, as the direct contact with the gasket and its vapours may
corrode the hardware surface,
KDUGZDUHFDQRQO\EHFOHDQHGZLWKVRIWSKQHXWUDOFOHDQLQJ
agent in diluted form; aggressive, acidiferous cleaners or
abrasive cleaning agents, containing the above mentioned
ingredients, must not be used at any time.
spin - PVC
The ARX spin turn and tilt building hardware is fully reliable and adjusted to hard climate; it combines the following features:
R Cam
R-Cams incorporate a regulatory function which allows installer or user to optimize the window
compression by +/-1,2mm, thereby improving the sealing properties of windows and balcony
doors. Moreover, the R-Cams provide smoother operation to window users who only need to
apply a minimum force in order to operate the handle.
Night vent
Night Vent is provided to allow gentle circulation of air through its gap in case of hot weather
or in order to prevent glass condensation, or even mould forming. The window handle is set at
the 45 degree angle between the two open positions. see on page 56.
spin - PVC
Range of use
spin - PVC
L (mm)
Material Lenght
MS (mm)
(mm)
Number of strikers
Turn and tilt / turn only sash
Number of screws
Application range:
Sash rebate width 300 - 1400 mm
Sash rebate height 320 - 2400 mm
Locking cam R
Locking cam P
NV - night vent
SRH (mm)
Handle height
HH (mm)
10
spin - PVC
In order to x hardware components, silver galvanized, steel construction screws of 3,5/4,0 x. are used. The window
manufacturer must ensure sucient xing of hardware components. If necessary, the manufacturer of construction screws may
also be included in the process of installing hardware.
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
F (N)
F (N)
1650
1900
2200
2450
2700
3000
3250
3500
3900
4200
4400
4700
5000
5300
5500
force
window frame
wall
The values in the table for sashes up to 80 kg in weight are normally achieved if high-quality screws are used for xing and the
xing on the prole is performed through at least two prole walls. The thickness of the rst prole wall must be at least 2.8 mm.
For sash weights over 80 kg a supplementary xing into the reinforcement prole or prole insertions in accordance with the
prole system, is necessary. Required values can be achieved without additional measures by using the bearing parts on sashes
up to 100 kg in weight.
PVC prole
PVC prole
2.8 mm
PVC prole
2.8 mm
Wood prole
2.8 mm
Gaskets with acetic net structure must not be used, as their use may lead to corrosion of hardware components. Guidelines
regarding the window glazing technique must be followed.
Use of related hardware types
Dierent options within the individual hardware system (e.g. tilt hardware) must be considered according to the product
information, purpose, misuse, product characteristics, maintenance and information and instructions, in regard to the
characteristics of the hardware assembly.
spin - PVC
11
Handle height
Lenght
Material Nr.
120
170
263
320
460
660
1083081
1083082
1083083
801 - 1000
801 - 1000
1001 - 1200
1201 - 1400
1401 - 1600
1601 - 1800
1601 - 1800
1801 - 2000
2001 - 2200
2201 - 2400
413
413
513
563
563
563
1000
1000
1000
1000
860
860
1060
1260
1460
1660
1660
1860
2060
2260
1083084
1083085
1083086
1083087
1083088
1083089
1083090
1083091
1083092
1083093
4604)
1R
1R
1R
1R
1R
1R
2R
2R
2R
Handle height
Lenght
Material Nr.
420 - 6204)
600 - 1000
900 - 1400
1401 - 1800
1601 - 2000
2001 - 2400
210 - 310
300 - 500
450 - 700
701 - 900
801 - 1000
1001 - 1200
340
720
1120
1520
1720
2120
1083117
1088473
1088474
1088475
1088476
1088477
CORNER DRIVE
CORNER DRIVE
CORNER DRIVE
CORNER DRIVE
1R
1R
1R
2R
2R
1083255
1083256
1R
2 R 3)
1 R + NV
1 R + NV
R3)
L3)
325 - 610
611 - 810
811 - 1010
1011 - 1210
1211 - 1410
Type/Lenght
325 - 610
325 - 610
611 - 810
611 - 810
811 - 1400
811 - 1400
250
250
350
350
500
500
Type/Lenght
325 - 610
325 - 610
611 - 810
611 - 810
811 - 1400
811 - 1400
250
250
350
350
500
500
Material Nr.
L
R
L
R
L
R
250 - 470
350 - 670
500 - 870
500 - 1070
500 - 1270
1083038
1083039
1083040
1083041
1083042
1R
1R
1R
SYSTEM 12/20-9
Type/Lenght
325 - 610
325 - 610
611 - 810
611 - 810
811 - 1400
811 - 1400
250
250
350
350
500
500
1083016
1083017
1083018
1083019
1083020
1083021
NV = night vent
2)
SRW = 325 - 410; with special corner drive
3)
Without shema
4)
Mishandling device not avalible
Material Nr.
L
R
L
R
L
R
1083008
1083009
1083010
1083011
1083012
1083013
Material Nr.
L
R
L
R
L
R
1083030
1083031
1083032
1083033
1083034
1083035
SEE PAGE 44
1083250
SEE PAGE 44
8 CENTRE LOCK
1083049
1083048
Material Nr.
spin - PVC
1083044
1083045
1083047
1083054
Type/Lenght
STAY ARM
1)
12
SYSTEM 12/20-13
Sash rebate width
SYSTEM 12/22-13
max
100 kg
325 - 1400 mm
320 - 2400 mm
Sash rebarate
width
Sash rebarate
height
Lenght
801 - 1200
1201 - 1400
/
/
801 - 1210
1211 - 1600
1601 - 2200
2201 - 2400
500/550
800/850
1500/1550
1950/2000
Material Nr.
2R
2R
3R
4R
1083058
1083059
1083060
1083064
1083241
1083242
SEE PAGE 44
1083247
SEE PAGE 44
SEE PAGE 44
11 T&T STRIKER
SEE PAGE 46
12 STRIKER
SEE PAGE 46
1093907
SEE PAGE 47
Parts review
7
6
6a
12
7a
12
2.400
APPLICATION DIAGRAMS
FRAME CLEARANCE
2.300
2.200
2.100
8
2.000
1.900
1.800
1.700
1.600
Glass weight
40 kg/m2
1.500
1.400
1.300
13
12
1.000
900
800
700
600
500
400
320
9b
10a
9a
10
1.400
1.300
1.100
1.200
900
1.000
800
700
500
600
9b
325
12
Glass weight
50 kg/m2
1.100
400
1.200
14
9
10b
12
11
2a
12
spin - PVC
13
Handle height
Lenght
Material Nr.
120
170
263
413
513
563
563
563
1000
1000
1000
320
460
660
860
1060
1260
1460
1660
1860
2060
2260
1095620
1083094
1083095
1083096
1083097
1083098
1083099
1083100
1083101
1083102
1083103
4603)4)
1R
1R
1R
1R
1R
2R
2R
2R
320 - 2400 mm
325 - 1400 mm
SYSTEM 12/20-13
Handle height
Lenght
Material Nr.
420 - 6204)
600 - 1000
900 - 1400
1401 - 1800
1601 - 2000
2001 - 2400
210 - 310
300 - 500
450 - 700
701 - 900
801 - 1000
1001 - 1200
340
720
1120
1520
1720
2120
1083117
1088473
1088474
1088475
1088476
1088477
1R
1R
1R
2R
2R
1P
1087801
1R
2 R 5)
1 R + NV 1)
1 R + NV 1)
1083044
1083045
1083047
1083054
R5)
L5)
2)
3)
4)
5)
1083049
1083048
9
250
250
350
350
500
500
Type/Lenght
325 - 610
325 - 610
611 - 810
611 - 810
811 - 1400
811 - 1400
250
250
350
350
500
500
Type/Lenght
801 - 1200
1201 - 1600
1601 - 2200
2201 - 2400
500/550
800/850
1500/1550
1950/2000
250 - 470
350 - 670
500 - 870
500 - 1070
500 - 1270
1083038
1083039
1083040
1083041
1083042
801 - 1200
1201 - 1400
400
600
Type/Lenght
325 - 610
325 - 610
611 - 810
611 - 810
811 - 1400
811 - 1400
250
250
350
350
500
500
NV = night vent
SRW = 325 - 410; with special corner drive
With integrated T&T corner drive 1P
Mishandling device not avalible
Without shema
spin - PVC
Material Nr.
L
R
L
R
L
R
1083008
1083009
1083010
1083011
1083012
1083013
1083250
SEE PAGE 44
Material Nr.
2R
2R
3R
4R
1083058
1083059
1083060
1083064
CENTRE LOCK
Type/Lenght
1083030
1083031
1083032
1083033
1083034
1083035
CENTRE LOCK
SYSTEM 12/20-9
1083016
1083017
1083018
1083019
1083020
1083021
Material Nr.
L
R
L
R
L
R
Material Nr.
1R
1R
1R
Material Nr.
L
R
L
R
L
R
SEE PAGE 44
Type/Lenght
STAY ARM
1)
325 - 610
325 - 610
611 - 810
611 - 810
811 - 1400
811 - 1400
1083051
14
1P
Type/Lenght
8
3a CORNER DRIVE
SYSTEM 12/22-13
CORNER DRIVE
CORNER DRIVE
CORNER DRIVE
CORNER DRIVE
max
100 kg
Material Nr.
1R
1R
1083061
1083062
1083241
1083242
SEE PAGE 44
1083247
SEE PAGE 44
SEE PAGE 44
SEE PAGE 46
13 STRIKER
SEE PAGE 46
1093907
SEE PAGE 47
Parts review
7
6
6a
13
7a
13
2.400
APPLICATION DIAGRAMS
FRAME CLEARANCE
2.300
2.200
2.100
8
2.000
1.900
1.800
1.700
1.600
Glass weight
40 kg/m2
1.500
1.400
1.300
14
13
1.000
900
800
700
600
500
400
320
10b
11a
10a
11
1.400
1.300
1.100
1.200
900
1.000
800
700
500
600
10b
325
13
Glass weight
50 kg/m2
1.100
400
1.200
15
10
11b
3a
13
1
2a
12
spin - PVC
15
TURN & TILT Hardware Fixed & Centered / variable Handle Height - Security
T&T ESPAGNOLETTE BS 14,5 mm
Sash rebarate height
Handle height
Lenght
Material Nr.
320 - 460
461 - 600
601 - 800
801 - 1000
1001 - 1200
120
170
263
413
513
320
460
660
860
1060
1R
1R
1095620
1083094
1083095
1083096
1083097
1201 - 1400
1401 - 1600
1601 - 1800
1801 - 2000
2001 - 2200
2201 - 2400
563
563
563
1000
1000
1000
1260
1460
1660
1860
2060
2260
1R
1R
1R
2R
2R
2R
1083098
1083099
1083100
1083101
1083102
1083103
1)3)
420 - 620 3)
600 - 1000
900 - 1400
1401 - 1800
1601 - 2000
2001 - 2400
410 - 1400 mm
5a
6
Handle height
Lenght
210 - 310
300 - 500
450 - 700
701 - 900
801 - 1000
1001 - 1200
340
720
1120
1520
1720
2120
max
100 kg
SEE PAGE 44
SEE PAGE 44
1083241
1083242
Material Nr.
1R
1R
1R
2R
2R
1083117
1088473
1088474
1088475
1088476
1087801
SEE PAGE 44
1083247
1P
1087801
SEE PAGE 44
1R+1P
1083046
SEE PAGE 44
1P
1083051
CORNER DRIVE
3a CORNER DRIVE
4
9 CENTRE LOCK
Type/Lenght
Material Nr.
410 - 610
611 - 810
811 - 1010
1011 - 1210
1211 - 1410
250 - 470
350 - 670
500 - 870
500 - 1070
500 - 1270
1083038
1083039
1083040
1083041
1083042
STAY ARM
1R
1R
1R
SYSTEM 12/20-9
Type/Lenght
410 - 610
410 - 610
611 - 810
611 - 810
811 - 1400
811 - 1400
250
250
350
350
500
500
Type/Lenght
410 - 610
410 - 610
611 - 810
611 - 810
811 - 1400
811 - 1400
250
250
350
350
500
500
Type/Lenght
410 - 610
410 - 610
611 - 810
611 - 810
811 - 1400
811 - 1400
250
250
350
350
500
500
Material Nr.
L
R
L
R
L
R
1083008
1083009
1083010
1083011
1083012
1083013
SYSTEM 12/20-13
Material Nr.
L
R
L
R
L
R
1083016
1083017
1083018
1083019
1083020
1083021
Sash rebate
width
601 - 800
801 - 1000
1001 - 1400
/
/
/
Sash rebate
height
Type
/
200
801 - 1200
400
1201 - 1400
600
1401 - 1800 600 + 400
1801 - 2000 600 + 600
2001 - 2400 2x 600 + 400
1P
1 R 2)
spin - PVC
1083030
1083031
1083032
1083033
1083034
1083035
1P
1083065
1083066
1P
1P
1083067
2 P 1083070 - 1083066
2 P 1083070 - 1083067
3 P 1083070 - 1083066
1083057
1083053
SEE PAGE 46
SEE PAGE 46
13 STRIKER
SEE PAGE 46
Material Nr.
L
R
L
R
L
R
Material Nr.
12 SECURITY STRIKER
SYSTEM 12/22-13
16
1083250
320 - 2400 mm
1)
2)
3)
1093907
SEE PAGE 47
Parts review
6
5
5a
12
6a
13
10
3
2.400
12
APPLICATION DIAGRAMS
FRAME CLEARANCE
2.300
2.200
2.100
2.000
1.900
1.800
1.700
1.600
Glass weight
40 kg/m2
1.500
1.400
Glass weight
50 kg/m2
1.100
13
1.000
900
800
700
600
500
7b
7b
8a
7a
1.300
1.400
1.100
1.200
900
1.000
700
410
14
800
400
320
500
13
1.200
600
1.300
15
8b
3a
12
1
2a
11
spin - PVC
17
420 - 620 1)
600 - 1000
900 - 1400
1401 - 1800
1601 - 2000
2001 - 2400
2
Handle height
Lenght
Material Nr.
210 - 310
300 - 500
450 - 700
701 - 900
801 - 1000
1001 - 1200
340
720
1120
1520
1720
2120
1083117
1088473
1088474
1088475
1088476
1088477
Handle height
180 - 250 1)
251 - 500 1)
501 - 900
901 - 1400
1401 - 1900
1901 - 2400
90 - 125
126 - 250
251 - 450
451 - 700
701 - 950
951 - 1200
Lenght
180
500
900
1400
1900
2400
Material Nr.
1R
1R
2R
3R
4R
4R
1083163
1083164
1083165
1083166
1083167
1083168
1R
1083257
1R
1083260
CENTRE LOCK
Sash rebate width
Type/Lenght
701 - 1200
1201 - 1400
500 - 550
800 - 850
SYSTEM 12/20-13
SYSTEM 12/22-13
CENTRE STRIKER
2R
2R
1083058
1083059
L
D
L
D
L
D
1083265
1083264
1083263
1083262
1083266
1083267
SEE PAGE 44
14 STRIKER
SEE PAGE 46
1083250
SEE PAGE 44
1083304
SEE PAGE 44
spin - PVC
1083247
SEE PAGE 44
SEE PAGE 44
SEE PAGE 44
Material Nr.
SEE PAGE 44
1083242
SEE PAGE 47
max
100 kg
300 - 1400 mm
ESPAGNOLETTE M BS 14,5 mm
18
1R
1R
1R
2R
2R
420 - 2400 mm
1083296
SEE PAGE 47
1083241
1)
1093907
Parts review
8
14
14
6
14
7a
2.400
8a
APPLICATION DIAGRAMS
FRAME CLEARANCE
2.300
2.200
2.100
2.000
1.900
1.800
9a 9b
1.700
1.600
ESPAGNOLETTE M BS
1.400
1.300
1.000
900
800
700
Glass weight
50 kg/m2
10
11
600
1.300
1.400
1.100
1.200
1.000
900
700
600
500
500
420
300
15
1.100
400
1.200
Glass weight
40 kg/m2
T&T ESPAGNOLETTE M BS
1.500
800
14
12c
12c
13a
3
14
12
12b
13
13b
6
14
14
2
4
14
spin - PVC
19
Handle height
Lenght
Material Nr.
320 - 460 1)
461 - 600
601 - 800
120
170
263
320
460
660
1083081
1083082
1083083
801 - 1000
801 - 1000
1001 - 1200
1201 - 1400
1401 - 1600
1601 - 1800
1601 - 1800
1801 - 2000
2001 - 2200
2201 - 2400
413
413
513
563
563
563
1000
1000
1000
1000
860
860
1060
1260
1460
1660
1660
1860
2060
2260
1083084
1083085
1083086
1083087
1083088
1083089
1083090
1083091
1083092
1083093
ESPAGNOLETTE BS 14,5 mm
Sash rebate height
Handle height
Lenght
400 - 500
501 - 600
601 - 700
701 - 800
801 - 900
901 - 1000
1001 - 1100
1101 - 1200
1201 - 1300
1301 - 1400
1401 -1500
1501 -1600
1601 - 1700
1701 - 1800
1801 - 2000
2001 - 2200
2201 - 2400
170
170
263
263
413
413
513
513
563
563
563
563
563
563
1000
1000
1000
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
2000
2200
2400
CENTRE LOCK
Type/Lenght
701 - 1200
1201 - 1400
500 - 550
800 - 850
Material Nr.
2R
2R
2R
2R
2R
2R
3R
3R
3R
3R
3R
3R
3R
4R
4R
4R
4R
1083129
1083130
1083131
1083132
1083133
1083134
1083135
1083136
1083137
1083138
1083139
1083140
1083141
1083142
1083143
1083144
1083145
1093907
SEE PAGE 47
1R
300 - 1400 mm
CENTRE STRIKER
L
D
L
D
L
D
1083265
1083264
1083263
1083262
1083266
1083267
SYSTEM 12/20-13
SYSTEM 12/22-13
spin - PVC
1083250
SEE PAGE 44
1083304
SEE PAGE 44
SEE PAGE 44
1083296
SEE PAGE 47
1083241
1083242
SEE PAGE 44
1083247
SEE PAGE 44
SEE PAGE 44
14 STRIKER
SEE PAGE 46
Material Nr.
1083058
1083059
SEE PAGE 44
1083260
2R
2R
max
100 kg
20
1R
1R
1R
1R
1R
1R
2R
2R
2R
320 - 2400 mm
1)
Parts review
14
14
6
14
7a
2.400
8a
APPLICATION DIAGRAMS
FRAME CLEARANCE
2.300
2.200
14
2.100
2.000
1.900
9a 9b
1.800
1.700
1.600
Glass weight
40 kg/m2
T&T ESPAGNOLETTE BS
1.500
ESPAGNOLETTE BS
1.400
1.300
1.000
900
800
700
Glass weight
50 kg/m2
10
11
1.300
1.400
1.100
1.200
1.000
900
700
800
600
500
500
420
600
400
1.100
300
1.200
12c
12c
13a
12
12b
13
13b
6
14
14
14
spin - PVC
21
TILT Hardware
ESPAGNOLETTE M BS 14,5 mm
Sash rebate width
Handle width
Lenght
180 - 250
251 - 500
501 - 900
901 - 1400
1401 -1900
1901 - 2400
90 - 125
126 - 250
251 - 450
451 - 700
701 - 950
951 - 1200
180
500
900
1400
1900
2400
300 - 1200 mm
Material Nr.
1R
1R
2R
3R
4R
4R
1083163
1083164
1083165
1083166
1083167
1083168
325 - 2400 mm
max
80 kg
Handle height
Lenght
Material Nr.
420 - 620
600 - 1000
900 - 1400
1401 - 1800
1601 - 2000
2001 - 2400
210 - 310
300 - 500
450 - 700
701 - 900
801 - 1000
801 - 1000
340
720
1120
1520
1720
2120
1R
1R
1R
2R
2R
1083117
1088473
1088474
1088475
1088476
1088477
1R
1083257
Used PCS
Material Nr.
1001 - 1600
1601 - 2400
1
2
1083296
Used PCS
Material Nr.
1001 - 1600
1601 - 2400
1
2
SEE PAGE 47
CENTRE LOCK
1R
Type/Lenght
701 - 1200
500 - 550
Material Nr.
2R
1083058
1083269
1083268
1083270
SEE PAGE 44
1083250
SEE PAGE 44
STRIKER
SEE PAGE 46
CENTRE STRIKER
Sash rebate width (mm)
Used PCS
Material Nr.
1001 - 1600
1601 - 2400
1
2
1083304
SEE PAGE 44
SEE PAGE 44
1) Without shema
22
1083260
spin - PVC
TILT STAY
1083315
1083314
Parts review
12
8
1
4
2
8
3
5
APPLICATION DIAGRAMS
FRAME CLEARANCE
12
900
800
700
600
ESPAGNOLETTE M BS 14,5 mm
500
400
At least 3 hinges
2.300
2.400
2.100
2.200
2.000
1.900
1.700
1.800
1.600
1.300
At least 2 hinges
1.400
1.500
1.200
1.100
900
1.000
700
800
500
600
300
320
1.100
1.000
400
12
1.200
At least
4 hinges
6a
10
9a
6
6a
7
9
7a
11
9b
7a
spin - PVC
23
Handle height
Lenght
610 - 800
801 - 1000
1001 - 1200
1201 - 1400
1401 -1600
1601 - 1800
1801 - 2000
2001 - 2200
2201 - 2400
335
490
335
335
335
335
640
640
640
660
860
1060
1260
1460
1660
1860
2060
2260
601 - 2400 mm
461 - 600 mm *
400 - 460 mm**
Material Nr.
1R
1R
1R
2R
2R
2R
2R
2R
1083174
1083175
1083176
1083177
1083178
1083179
1083180
1083181
1083182
max
100 kg
325 - 1400 mm
SEE PAGE 44
1083247
SEE PAGE 44
1098116
1098120
1098121
1098122
1098123
1098124
1098125
SEE PAGE 44
SEE PAGE 46
1083252
11 STRIKER groove
1083207
1083253
12 CENTRE STRIKER
1083304
1083254
Handle height
500 - 680
600 - 1000
800 - 1000
1001 - 1400
1401 - 1800
1801 - 2000
2001 - 2400
290-380
387-586
587-687
350-550
350-550
350-550
350-550
CORNER DRIVE
Lenght
Material Nr.
400
720
720
1120
1520
1720
2120
1R
1R
1R
1R
2R
2R
1R
STRIKER
10 STRIKER 2 sash
SEE PAGE 48
SEE PAGE 44
SEE PAGE 44
1083044
13 CONNCEALED STRIKER CLOSER - sash
1083296
L
D
L
D
L
D
1083265
1083264
1083263
1083262
1083266
1083267
SEE PAGE 44
1083250
SEE PAGE 47
15 MISHANDLING DEVICE -
1083295
1083293
16 CENTRE LOCK
Sash rebate width
Type/Lenght
811 - 1210
1211 - 1400
500/550
800/850
Material Nr.
2R
2R
1083058
1083059
SEE PAGE 44
17 CENTRE LOCK
1083241
1083242
Type/Lenght
811 - 1210
1211 - 1400
400
600
Material Nr.
1R
1R
1083061
1083062
spin - PVC
Parts review
6
16
5
10
17
6a
6a
4
3c
APPLICATION DIAGRAMS
FRAME CLEARANCE
2.400
3b
12a 12b
2.300
2.200
2.100
2.000
1.900
1.800
12
1.700
1.600
Glass weight
40 kg/m2
1.500
1.400
11
1.000
900
800
700
600
7b
500
7b
8a
400
1.400
1.300
1.100
1.200
900
1.000
800
700
600
500
320
325
Glass weight
50 kg/m2
1.100
400
15
1.200
14
13
1.300
3a
8
7
7a
8b
16
9
10
2a
spin - PVC
25
Handle height
Lenght
Material Nr.
490 - 600
601 - 800
801 - 1000
801 - 1000
1001 - 1200
1201 - 1400
1401 - 1600
1601 - 1800
1601 - 1800
1801 - 1900
170
263
413
413
513
513
563
563
1000
1000
460
660
860
860
1060
1260
1460
1660
1660
1860
1083082
1083083
1083084
1083085
1083086
1083087
1083088
1083089
1083090
1083091
1R
1R
1R
1R
1R
1R
2R
490 - 1900 mm
400 - 1400 mm
max
80 kg
1R
1083242
1084512
SEE PAGE 44
Handle height
Lenght
490 - 620
600 - 1000
900 - 1400
1401 - 1800
1601 - 2000
2001 - 2400
245 - 310
300 - 500
450 - 700
701 - 900
801 - 1000
1001 - 1200
340
720
1120
1520
1720
2120
1083247
Material Nr.
1R
1R
1R
2R
2R
1083117
1088473
1088474
1088475
1088476
1088477
SEE PAGE 44
SEE PAGE 44
1083255
1083256
Type/Lenght
400 - 650
651 - 900
901 - 1150
1151 - 1400
370
620
870
1120
Material Nr.
1R
1R
2R
1083076
1083077
1083078
1083079
Type/Lenght
610 - 1400
590
Material Nr.
2R
11 T&T STRIKER
SEE PAGE 46
12 STRIKER
SEE PAGE 46
1083080
System 12/20 -9
System 12/20 -13
System 12/22 -13
1R
1R
1R
1083014
1083022
1083036
SEE PAGE 44
1083250
SEE PAGE 44
26
Type/Lenght
491 - 700
701 - 900
901 - 1100
1101 - 1300
1301 - 1500
1501 - 1700
1701 - 1900
380
580
780
980
1180
1380
1580
spin - PVC
Material Nr.
1R
1R
1R
2R
2R
2R
1083071
1083072
1083073
1083074
1083075
1084924
1084925
1093907
SEE PAGE 47
Parts review
12
12
5
APPLICATION DIAGRAMS
FRAME CLEARANCE
Glass weight
kg/m2
30
40
1.900
20
4a
1.800
5a
1.700
1.600
1.500
1.000
900
800
8a
9a
700
1.300
1.400
1.100
1.200
900
1.000
700
800
600
500
490
400
13
1.100
600
12
1.300
1.200
500
1.400
9b
2a
12
10
12
11
12
1
spin - PVC
27
Handle height
Lenght
Material Nr.
320 - 4602)
461 - 600
601 - 800
801 - 1000
801 - 1000
1001 - 1200
1201 - 1400
1401 - 1600
1601 - 1800
1601 - 1800
120
170
263
413
413
513
513
563
563
1000
320
460
660
860
860
1060
1260
1460
1660
1660
1083081
1083082
1083083
1083084
1083085
1083086
1083087
1083088
1083089
1083090
1R
1R
1R
1R
1R
1R
Handle height
Lenght
Material Nr.
420 - 620
600 - 1000
900 - 1400
1401 - 1800
210 - 310
300 - 500
450 - 700
701 - 900
340
720
1120
1520
1083117
1088473
1088474
1088475
1R
1R
2R
max
80 kg
1083242
SEE PAGE 44
1083247
SEE PAGE 44
SEE PAGE 44
1083255
1083256
1R
1084512
1R
1R
1R
1083022
1083014
1083036
400 - 1400 mm
490 - 1900 mm
320 - 1800 mm
SEE PAGE 44
1083250
Type/Lenght
400 - 650
651 - 900
901 - 1150
1151 - 1400
370
620
870
1120
Material Nr.
2R
2R
3R
4R
1083076
1083077
1083078
1083079
11 T&T STRIKER
SEE PAGE 46
12 STRIKER
SEE PAGE 46
1093907
SEE PAGE 47
SEE PAGE 44
28
400 - 1400
801 - 1900
1083050
Type/Lenght
Material Nr.
491 - 700
701 - 900
901 - 1100
1101 - 1300
1301 - 1500
1501 - 1700
1701 - 1900
380
580
780
980
1180
1380
1580
1083071
1083072
1083073
1083074
1083075
1084924
1084925
400 - 1400
320 - 800
1R
1R
1R
2R
2R
2R
CENTRE LOCK
Sash rebate width
Type/Lenght
801 - 1200
400
1R
1083061
1201 - 1400
600
1R
1083062
spin - PVC
Material Nr.
1R
Material Nr.
1)
2)
Material Nr.
1R
1083257
Parts review
12
12
APPLICATION DIAGRAMS
FRAME CLEARANCE
Glass weight
kg/m2
30
40
15
1.900
16
20
1.800
4a
1.700
5a
1.600
1.500
1.300
1.200
1.100
1.000
900
800
700
9a
1.300
1.400
1.200
1.100
900
700
800
500
1.000
13
8a
600
500
490
400
12
600
1.400
14
10
9b
12
12
11
2a
12
spin - PVC
29
T&T ESPAGNOLETTE M
BS 14,5 mm
+
MS
SRH
L
X, MS
X, MS
SRH
HH
420 - 620 1)
600 - 1000
900 - 1400
1401 - 1800
1601 - 2000
2001 - 2400
210 - 310
300 - 500
450 - 700
701 - 900
801 - 1000
1001 - 1200
L (mm)
x (mm)
x (mm)
MS (mm)
340
720
1120
1520
1720
2120
-110
-110
- 110
- 310
- 310
+ 310
+ 310
+ 39,5
+ 90,5
+ 90,5
+ 90,5
+ 90,5
1
1
1
2
2
2
5
7
8
10
Pack
Material Nr.
10
10
10
10
10
10
1083117
1088473
1088474
1088475
1088476
1088477
900 - 1400
1401 - 1800
1601 - 2000
2001 - 2400
HH
450 - 700
701 - 900
801 - 1000
1001 - 1200
L (mm)
x (mm)
x (mm)
x (mm)
x (mm)
MS (mm)
1120
1520
1720
2120
-631
+ 310
+ 310
+ 209
+ 209
+ 109
+ 309
+ 559
+ 629
-120,5
-120,5
-120,5
-120,5
2
2
3
4
6
8
9
12
Pack.
Material Nr.
10
10
10
10
1093879
1093880
1093881
1093882
BS 7,5 mm
_
+
MS
SRH
L
X, MS
SRH
X, MS
HH
(mm)
(mm)
L (mm)
x (mm)
x (mm)
MS (mm)
420 - 820 1)
600 - 1000 1)
900 - 1400
1401 - 1800
1601 - 2000
2001 - 2400
210 - 410
300 - 500
450 - 700
701 - 900
801 - 1000
1001 - 1200
540
720
1120
1520
1720
2120
-110
-110
- 110
- 310
- 310
+ 310
+ 310
+ 90,5
+ 90,5
+ 90,5
+ 90,5
1
1
1
2
2
2
5
7
8
10
Pack
Material Nr.
10
10
10
10
10
10
1083123
1083124
1083125
1083126
1083127
1083128
spin - PVC
ESPAGNOLETTE M
M BS 14,5mm
MS
SRH
L
X, MS
X, MS
SRH
HH
(mm)
(mm)
L (mm)
x (mm)
x (mm)
x (mm)
x (mm)
MS (mm)
180 - 250 1)
251 - 500 1)
501 - 900
901 - 1400
1401 - 1900
1901 - 2400
90 - 125
126 - 250
251 - 450
451 - 700
701 - 950
951 - 1200
180
500
900
1400
1900
2400
- 63,7
-75
-200
- 400
- 250
- 350
+ 200
+ 113
+ 250
+ 350
+ 400
+ 650
+ 900
- 650
- 900
- 127,5
- 127,5
+ 90,5
+ 90,5
1
1
2
3
4
4
2
6
12
16
20
20
Pack
Material Nr.
10
10
10
10
10
10
1083163
1083164
1083165
1083166
1083167
1083168
M BS 7,5mm
_
+
MS
SRH
L
X, MS
SRH
X, MS
HH
(mm)
(mm)
L (mm)
x (mm)
x (mm)
x (mm)
x (mm)
MS (mm)
251 - 500 1)
501 - 900
901 - 1400
1401 - 1900
1901 - 2400
126 - 250
251 - 450
451 - 700
701 - 950
951 - 1200
500
900
1400
1900
2400
-75
- 200
- 400
- 250
- 350
+ 200
+ 113
+ 250
+ 350
+ 400
+ 650
+ 900
- 650
- 900
- 127,5
- 127,5
+ 90,5
+ 90,5
1
2
3
4
4
6
12
16
20
20
Pack
Material Nr.
10
10
10
10
10
1083169
1083170
1083171
1083172
1083173
spin - PVC
31
T&T ESPAGNOLETTE
BS 14,5mm
MS
SRH
L
X
HH
SRH
HH
(mm)
(mm)
L (mm)
x (mm)
x (mm)
MS (mm)
320 - 460 1)
461 - 600
601 - 800
801 - 1000
801 - 1000
1001 - 1200
1201 - 1400
1401 - 1600
1601 - 1800
1601 - 1800
1801 - 2000
2001 - 2200
2201 - 2400
120
170
263
413
413
513
563
563
563
1000
1000
1000
1000
320
460
660
860
860
1060
1260
1460
1660
1660
1860
2060
2260
530
680
680
680
680
680
1350
1350
1350
680
680
680
220,5
135,5
285,5
285,5
385,5
385,5
385,5
385,5
385,5
1118,5
1118,5
1118,5
1
1
1
1
1
1
2
2
2
1* (0)
3* (2)
4* (3)
5* (4)
5* (4)
6* (5)
8* (7)
9* (8)
10* (9)
10* (9)
13* (12)
14* (13)
15* (14)
Pack
Material Nr.
10
10
10
10
10
10
10
10
10
10
10
10
10
1083081
1083082
1083083
1083084
1083085
1083086
1083087
1083088
1083089
1083090
1083091
1083092
1083093
Pack
Material Nr.
10
10
10
10
10
10
1093878
1093877
1093874
1083091
1093873
1093872
MS
SRH
L
X
HH
SRH
HH
(mm)
(mm)
L (mm)
x (mm)
x (mm)
x (mm)
MS (mm)
1201 - 1400
1401 - 1600
1601 - 1800
1801 - 2000
2001 - 2200
2201 - 2400
563
563
563
1000
1000
1000
1260
1460
1660
1860
2060
1460
911
1111
1111
1711
1711
680
680
680
1350
1350
1350
680
680
680
385,5
385,5
385,3
1118,5
1118,5
1118,5
2
2
2
2
3
3
9* (8)
10* (9)
11* (10)
12* (11)
13* (12)
14* (13)
32
spin - PVC
T&Ti ESPAGNOLETTE
BS 14,5mm
MS
SRH
L
X
HH
SRH
HH
(mm)
1) 2)
320 - 460
461 - 600
601 - 800
801 - 1000
1001 - 1200
1201 - 1400
1401 - 1600
1601 - 1800
1801 - 2000
2001 - 2200
2201 - 2400
(mm)
L (mm)
x (mm)
x (mm)
MS (mm)
120
170
263
413
513
563
563
563
1000
1000
1000
320
460
660
860
1060
1260
1460
1660
1860
2060
2260
530
680
680
680
680
1350
1350
1350
680
680
680
220,5
135,5
285,5
385,5
385,5
385,5
385,5
1118,5
1118,5
1118,5
1
1
1
1
1
2
2
2
2
2
2
4
5
7
8
9
11
12
13
Pack
Material Nr.
10
10
10
10
10
10
10
10
10
10
10
1095620
1083094
1083095
1083096
1083097
1083098
1083099
1083100
1083101
1083102
1083103
Pack
Material Nr.
10
10
10
10
10
10
10
10
10
10
10
10
10
1083104
1083105
1083106
1083107
1083108
1083109
1083110
1083111
1083112
1083113
1083114
1083115
1083116
BS 7,5mm
MS
SRH
L
X
HH
FFH
(mm)
330 - 460 1) 2)
441 - 600 2)
601 - 800
801 - 1000
801 - 1000
1001 - 1200
1201 - 1400
1401 - 1600
1601 - 1800
1601 - 1800
1801 - 2000
2001 - 2200
2201 - 2400
HH
(mm)
L (mm)
x (mm)
x (mm)
MS (mm)
120
170
263
413
413
513
563
563
563
1000
1000
1000
1000
320
460
660
860
860
1060
1260
1460
1660
1660
1860
2060
2260
530
680
680
680
680
680
1350
1350
1350
680
680
680
135,5
285,5
285,5
385,5
385,5
385,5
385,5
385,5
1118,5
1118,5
1118,5
1
1
1
1
1
1
2
2
2
2* (0)
3* (2)
4* (3)
5* (4)
5* (4)
6* (5)
8* (7)
9* (8)
10* (9)
10* (9)
13* (12)
14* (13)
15* (14)
spin - PVC
33
MS
SRH
L
HH
X1
X2
X3
X4
SRH
HH
(mm)
1)
400 - 500
501 - 600
601 - 700
701 - 800
801 - 900
901 - 1000
1001 - 1100
1101 - 1200
1201 - 1300
1301 - 1400
1401 - 1500
1501 - 1600
1601 - 1700
1701 - 1800
1801 - 2000
2001 - 2200
2201 - 2400
(mm)
L (mm)
x1 (mm)
x2 (mm)
x3 (mm)
x4 (mm)
MS (mm)
170
170
263
263
413
413
513
513
563
563
563
563
563
563
1000
1000
1000
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
2000
2200
2400
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
709
685
685
685
709
709
709
709
709
709
709
1129
1279
1329
1529
329
429
529
629
729
829
929
1029
1129
1229
1329
1429
1529
1629
1729
1929
2129
220,5
135,5
135,5
285,5
285,5
385,5
385,5
385,5
385,5
385,5
385,5
385,5
385,5
1118,5
1118,5
1118,5
2
2
2
2
2
2
2
3
3
3
3
3
3
4
4
4
4
6
7
8
9
9
9
10
10
11
11
11
12
12
14
15
15
17
Pack
Material Nr.
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
1083129
1083130
1083131
1083132
1083133
1083134
1083135
1083136
1083137
1083138
1083139
1083140
1083141
1083142
1083143
1083144
1083145
spin - PVC
SRH
L
HH
SRH
HH
(mm)
(mm)
L (mm)
S (mm)
S (mm)
600 - 800
801 - 1000
1001 - 1200
1201 - 1400
1401 - 1600
1601 - 1800
1801 - 2000
2001 - 2200
2201 - 2400
335
490
335
335
335
335
640
640
640
660
860
1060
1260
1460
1660
1860
2060
2260
537
688
688
688
688
688
688
688
1358
1358
1358
4*(3)
4*(3)
5*(4)
8*(7)
8*(7)
9*(8)
10*(9)
11* (10)
12* (11)
Pack
Material Nr.
10
10
10
10
10
10
10
10
10
1083174
1083175
1083176
1083177
1083178
1083179
1083180
1083181
1083182
SRH
L
HL
HH
FFH
HH
(mm)
(mm)
L (mm)
S (mm)
S (mm)
600 - 800
801 - 1000
1001 - 1200
1201 - 1400
1401 - 1600
1601 - 1800
1801 - 2000
2001 - 2200
2201 - 2400
335
490
335
335
335
335
640
640
640
660
860
1060
1260
1460
1660
1860
2060
2260
537
688
688
688
688
688
688
688
1358
1358
1358
4
4
5
8
8
9
10
11
12
Pack
Material Nr.
10
10
10
10
10
10
10
10
10
1083174
1083175
1083176
1083177
1083178
1083179
1083180
1083181
1083182
spin - PVC
35
CORNER DRIVE
140
58
140
140
140
58
58
140
58
50
106
175
53
10
36
spin - PVC
140
CORNER DRIVE
SRH
SRW
Type
(mm)
(mm)
1
1a
2
3
4a
4b
5
6
7
8
9
10
320 - 2400
320 - 2400
320 - 2400
320 - 2400
320 - 2400
320 - 2400
290 - 320
320 - 2400
320 - 2400
320 - 2400
320 - 2400
320 - 2400
410 - 1600
410 - 1600
410 - 1600
410 - 1600
410 - 1600
410 - 1600
320 - 410
320 - 410
410 - 1600
410 - 1600
410 - 1600
410 - 1600
Description
Corner drive 1R
Corner drive 1P
Corner drive 2R
Corner drive 1R + 1P
Corner drive 1R +NV* R
Corner drive 1R +NV* L
Short corner drive 1R
Short corner drive w. shootbolt
Corner lock 180 1R
T&T Corner drive 180 1P
T&T Corner drive 140 1R
T&T Corner drive 140 1P SECURITY
1
1
2
1
1
1
1
1
1
1
1
1
1
1
4
4
4
4
4
4
3
3
2
4
2
2
Pack
Material Nr.
10
10
10
10
10
10
10
10
10
10
10
10
1083044
1083051
1083045
1083046
1083047
1083054
1083049
1083048
1083053
1083057
1084512
1087801
SASH-STAY GUIDE
R
L
SRW
SRW
(mm)
L (mm)
R (mm)
3251) - 610
611 - 810
811 - 1010
1011 - 1210
1211 - 1410
1411 - 1600
470
670
870
1070
1270
1470
+ 546
+ 607
+ 807
+ 807
1
1
1
1
3* (2)
5* (4)
6* (5)
8* (7)
9* (8)
10* (9)
Pack
Material Nr.
10
10
10
10
10
10
1083038
1083039
1083040
1083041
1083042
1083043
65
123
Description
Position
Pack
Material Nr.
SYSTEM 12/20-9
left
right
4
4
40
40
1083265
1083264
SYSTEM 12/20-13
left
right
4
4
40
40
1083263
1083262
SYSTEM 12/22-13
left
right
4
4
40
40
1083266
1083267
spin - PVC
37
SRW
Description
L (mm)
Pack
Material Nr.
(mm)
100
100
100
50
50
50
1083269
1083268
1083270
350 - 1200
1201 - 2200
2201 - 2400
2
3
4
STAY ARM
L
SRW
Description
(mm)
L (mm)
Position
Pack
Material Nr.
325 - 610
325 - 610
611 - 810
611 - 810
811 - 1600
811 - 1600
250
250
350
350
500
500
left
right
left
right
left
right
10
10
10
10
10
10
1083008
1083009
1083010
1083011
1083012
1083013
325 - 610
325 - 610
611 - 810
611 - 810
811 - 1600
811 - 1600
250
250
350
350
500
500
left
right
left
right
left
right
10
10
10
10
10
10
1083016
1083017
1083018
1083019
1083020
1083021
325 - 610
325 - 610
611 - 810
611 - 810
811 - 1600
811 - 1600
250
250
350
350
500
500
left
right
left
right
left
right
10
10
10
10
10
10
1083030
1083031
1083032
1083033
1083034
1083035
325 - 610
325 - 610
611 - 810
611 - 810
811 - 1600
811 - 1600
250
250
350
350
500
500
left
right
left
right
left
right
10
10
10
10
10
10
1083025
1083024
1083027
1083026
1083029
1083028
SYSTEM 12/20-9
SYSTEM 12/20-13
SYSTEM 12/22-13
38
spin - PVC
A
B
X
L
Description
L (mm)
X (mm)
System 12/20-13
System 12/20-9
System 12/22-13
430
430
430
372
372
372
A (mm)
249
249
249
B (mm)
372
372
372
1
1
1
Pack
Material Nr.
10
10
10
1083022
1083014
1083036
CENTRE LOCK
+
L
SRH
SRW
(mm)
(mm)
L (mm)
(mm)
(mm)
(mm)
(mm)
600 - 800
801 - 1200
1201 - 1600
1601 - 2200
2201 - 2400
600 - 810
811 - 1210
1211 - 1600
DOOR
DOOR
350
550
850
1550
2000
+300
+ 106
+ 106
+ 106
+ 106
+ 500
+ 800
+ 800
+ 800
+ 1500
+ 1500
+ 1950
1
2
2
3
4
4
4
6
10
11
Pack
Material Nr.
10
10
10
10
10
1093871
1083058
1083059
1083060
1083064
CENTRE LOCK
R
L
Description
R (mm)
400
600
340
540
540
600 Clamping
4
4
4
Pack
Material Nr.
10
10
10
1083061
1083062
1083063
spin - PVC
39
Description
L (mm)
P (mm)
200
400
600
200
400
600
200
400
600
140
340
540
140
340
540
200 Clamping
400 Clamping
600 Clamping
1
1
1
1
1
1
2
4
4
2
4
4
Pack
Material Nr.
10
10
10
10
10
10
1083065
1083066
1083067
1083068
1083069
1083070
ESPAGNOLETTE EXTENSION
R
L
SRH
40
(mm)
L (mm)
R (mm)
200 - 400
401 - 600
601 - 800
400
600
800
80
80
80
spin - PVC
3
4
5
1
1
1
Pack
Material Nr.
10
10
10
1083258
1083259
1083261
+
L
SRH
SRH
491 - 700
701 - 900
901 - 1100
1101 - 1300
1301 - 1500
1501 - 1700
1701 - 1900
L (mm)
(mm)
(mm)
380
580
780
980
1180
1380
1580
281
481
681
281
481
681
881
1080
1280
1
1
1
2
2
1
2
4
5
5
7
8
8
Pack
Material Nr.
10
10
10
10
10
10
10
1083071
1083072
1083073
1083074
1083075
1084924
1084925
Pack
Material Nr.
10
10
10
10
1083076
1083077
1083078
1083079
+
L
SRW
SRW
400 - 650
651 - 900
901 - 1150
1151 - 1400
L (mm)
(mm)
(mm)
370
620
870
1120
276
526
276
775
1
1
2
1
3
4
6
spin - PVC
41
SRW
610 - 1400
L (mm)
(mm)
(mm)
590
80
430
Pack
Material Nr.
10
1083080
Pack
Material Nr.
200
1093907
MISHANDLING DEVICE-SASH
Description
TILT STAY
1
Description
1 - Tilt stay
2 - Tilt stay Groove
42
spin - PVC
5
7
Pack
Material Nr.
100
100
1083314
1083315
CORNER HINGE
Type
Description
Position
Pack.
Material Nr.
left / right
200
1083241
left / right
200
1083243
left / right
200
1083242
left / right
200
1083244
Pack.
Material Nr.
200
1083250
Pak.
Material Nr.
200
1083247
Description
Position
left / right
Description
Position
left / right
spin - PVC
43
CENTRE STRIKER
Type
Description
RAL
CENTRE STRIKER
RAL9005 - Black
RAL9006 - Silver
RAL9016 - White
RAL8019 - Greybrown
RAL9005 - Black
RAL9006 - Silver
RAL9016 - White
RAL8019 - Greybrown
Pack
Material Nr.
200
1083304
500
500
500
500
250
250
250
250
1095481
1093931
1083282
1083284
1095460
1093930
1083281
1083283
COVER CAP
1
Type
44
2
Description
spin - PVC
5
RAL
RAL9016 - White
RAL8019 - Greybrown
RAL9005 - Black
RAL9006 - Silver
RAL9016 - White
RAL8019 - Greybrown
RAL9005 - Black
RAL9006 - Silver
RAL9016 - White
RAL8019 - Greybrown
RAL9005 - Black
RAL9006 - Silver
RAL9016 - White
RAL8019 - Greybrown
RAL9005 - Black
RAL9006 - Silver
RAL9016 - White
RAL8019 - Greybrown
RAL9005 - Black
RAL9006 - Silver
Pack
Material Nr.
400
400
400
400
100
100
100
100
100
100
100
100
500
500
500
500
300
300
300
300
1083279
1083280
1087797
1093928
1083277
1083278
1087796
1093926
1083271
1083272
1087793
1093919
1083275
1083276
1087795
1093923
1083273
1083274
1087794
1093922
LOCK BOLT
L
SRH
SRH
Type
1
2
3
Description
(mm)
L(mm)
<1000
>1000
140
140
140
140
(mm)
1
1
1
1
55
55
3* (2)
3* (2)
3* (2)
3* (2)
Pack
Material Nr
100
100
100
100
1083255
1083256
1083257
1083260
Pack.
Material Nr
50
1098128
Description
L (mm)
3* (2)
140
spin - PVC
45
SHOOTBOLT
Type
1
2
3
Description
T&T SHOOTBOLT
SHOOTBOLT WITH STRIKER
SHOOTBOLT WITHOUT STRIKER
L(mm)
3* (2)
3* (2)
230
230
140
Pack
Material Nr.
50
50
100
1083252
1083253
1083254
46
spin - PVC
T&T STRIKER
T&T STRIKER
Pack
Material Nr.
250
250
250
250
250
250
1083183
1083185
1083185
1083186
1083187
1083189
Pack
Material Nr.
100
100
100
100
100
100
100
100
1083190
1083191
1083196
1083192
1083193
1083194
1083195
1083197
STRIKER
STRIKER
Pack
Material Nr.
100
100
1083817
1095816
Pack
Material Nr.
300
300
300
300
300
300
300
1083202
1083203
1083204
1083204
1083205
1083206
1083208
300
1083207
STRIKER OHG
SECURITY STRIKER
SECURITY STRIKER
Pack
Material Nr.
100
100
100
100
100
100
100
1089625
1083214
1083216
1083217
1083218
1083219
1083220
spin - PVC
47
MISHANDLING DEVICE-FRAME
MISHANDLING DEVICE - SASH
Pack
Material Nr.
200
1093907
Pack
Material Nr.
300
300
300
300
300
300
300
1083286
1083287
1083288
1083289
1083290
1083291
1083292
Pack
Material Nr.
300
300
1083293
1083295
Pack
Material Nr.
200
1083296
Pack
Material Nr.
300
300
300
300
300
300
300
1083297
1083298
1083299
1083300
1083301
1083302
1083303
BULLET CATCH
BULLET CATCH CAM - SASH
Pack
Material Nr.
100
1083305
Pack
Material Nr.
100
100
100
100
100
100
100
100
1083306
1083307
1083308
1083309
1083312
1083311
1093915
1093200
Pack
Material Nr.
300
300
1083236
1083238
48
spin - PVC
1R + NV
Pack
Material Nr.
100
100
100
100
100
100
100
1095293
1095293
1095293
1095293
1095741
1095293
1095293
Pack
Material Nr.
300
300
300
300
300
300
1083224
1083226
1083226
1083227
1083228
1083230
STRIKER 2-SASH
STRIKER 2-SASH
spin - PVC
49
WINDOW-HANDLE DRILLING
GEAR-CASE SPROCTEK AND LUGS DRILL HOLES FOR THE WINDOW-HANDLE
10
10
12
Hardware groove
ROUTING
ESPAGNOLETTE GEAR-CASING
Backset
min. routing depht
50
spin - PVC
DRILLING JIG
Sash overlap
DRILL HOLE 3 mm
100 KG
CENTER of corner
pivot rest
DRILING JIG-FRAME
MAT. NR.1083340
*
DRILL HOLE 3 mm
100 KG
spin - PVC
51
DRILLING JIG
CORNER HINGE
100 KG
DRILLING JIG-SASH
MAT. NR. 1083341
- DRILL HOLE 3 mm
- 5 MM DEEP FOR CORNER HINGE
CORNER HINGE
130 KG
52
spin - PVC
DRILLING JIG-SASH
MAT. NR. 1083342
WHEN USING A 13 mm HARDWARE AXIS,
READJUST THE DRILLING JIG.
20
20
spin - PVC
53
4a
hinge - side
espagnolette - side
up
down
DOOR
WINDOW
1a
1
2
Jig
Cross section C- C
Type
1
1a
2
3
4
4a
5
6
54
spin - PVC
Description
Material Nr.
1083316
1093917
1083317
1083318
1083319
1093916
1083320
1093918
ADJUSTMENT INSTRUCTIONS
+4 mm
- 2 mm
+1 mm
- 1 mm
+2 mm
- 1 mm
+2 mm
- 2 mm
+0,5 mm
- 0,5 mm
+1,2 mm
- 1,2 mm
+2 mm
- 2 mm
spin - PVC
55
MAINTENANCE RECOMMENDATIONS
Regular greasing and oiling of operation-relevant components in the sash and frame is
recommended at least once a year. In case of frequent use as in schools, hotels the oiling is
recommended once in six month.
Acid free and nonresinous grease and/or oil from a specialized dealer has to be used.
ARX GREASE
56
spin - PVC
1055144
Locking pin R
Locking pin P
+/- 1.2
90
90
Adjustment tool
+/- 0.8
Adjustment tool
1090862
1080695
spin - PVC
57
45
TILT POSITION
NIGHT VENT
58
spin - PVC
WARNING
IN ORDER TO PRESERVE THE LONG OPERATIVENESS OF YOUR WINDOW AND TO GUARANTEE SECURITY, IT IS IMPERATIVE
TO OBSERVE THE DIRECTIVES LISTED BELOW.
CAUTION!
WHERE SMALL CHILDREN
OR MENTALLY HADICAPPED
PERSONS HAVE ACCESS TO
THE WINDOW, THE SASH
IS TO BE SAFEGUARDED
AGAINST TURNING, FOR
EXAMPLE WITH A CHILDSAFETY LOCK (INHIBITS
TURN-MODUS, PERMITS
TILT-MODUS) OR KEYLOCKBLE HANDLES.
CAUTION!
A SLAMMING SASH CAN LEAD
TO INJURIES. WHILE CLOSING,
DO NOT GRASP BETWEEN THE
SASH AND FRAME.
spin - PVC
59
Kovinoplastika Lo d.d.
Cesta 19 oktobra 571386 Stari trg pri Lou Slovena
Telefon: 00386 1 7095 100)D[00386 1 7058 466