Académique Documents
Professionnel Documents
Culture Documents
30th Annual
Architect
Survey
Also Inside:
+ Building Profile: Iowa Lakes Community College
+ Architect Profile: Kathryn Crockett, AIA, LEED AP
+ Sports & Recreation Projects
Contemporary Curve
Jefferson County Western Health Center, Midfield, AL
Owner: Jefferson County Department of Health
Architect: Birchfield Penuel & Associates, Birmingham, AL
General contractor: M.J. Harris Construction Services, Birmingham, AL
Installing contractor: CSC Roofing, Birmingham, AL
Profiles: Tite-Loc curved, Reveal Wall Panels
Colors: Cardinal Red, Sierra Tan
CASE STUDY
REVEAL
TITE-LOC
PAC-CLAD.COM | IL: 1 800 PAC CLAD | MD: 1 800 344 1400 | TX: 1 800 441 8661 | GA: 1 800 272 4482 | MN: 1 877 571 2025
editors corner
Annual Forecasts
becoming far more energy efficient, and certain technologies are increasing
are all factoring into a very favorable outlook for the construction industry.
both the efficiency of the people using the buildings and the project delivery
Another recent report of interest is Gilbane Building Co.s Winter 20152016 Construction Economics Report. According to the report, the 2015 con-
the survey, AIA queried its Architecture Billings Index (ABI) panelists for the
design trends they think will be the most prevalent over the next decade.
percent in 2016, with total spending in 2015 reaching $1.1 trillion. The three-
design options
year growth for total construction spending from 2014 to 2016 is expected
Increased use of natural daylighting techniques and of lighting technology systems, including automation controls and motion-sensor activated
lights
to reach 30 percent, setting an all-time high, with growth from 2013 to 2015
reaching 27 percent, the second-highest growth period ever recorded.
Spending advances in 2015 and 2016 are supported by the strongest
gains in nonresidential buildings in eight years. And, for five of the last six
quarters, construction starts for new nonresidential buildings were the high-
practices that will increase the efficiency of the building design process
With so many reports released around this time, its easy to go on and on
about the numbers. One thing that stands out from all Ive seen is that the
increase in construction building and spending is expected to continue.
Marcy Marro
Editor
METAL ARCHITECTURE (ISSN-0885-5781) is published monthly by Modern Trade Communications Inc., 7250 N. Cicero Ave., Suite 100, Lincolnwood, IL 60712. Subscriptions are free for those in the metal construction industry in the United States. For those outside the industry, the subscription price is $45 per year, in the United States; $75, in Canada and Mexico; and $150 per year in all other countries. Periodicals class
postage paid at Chicago, IL, and additional mailing offices. POSTMASTER: Address service requested. METAL ARCHITECTURE, 7250 N. Cicero Ave., Suite 100, Lincolnwood, IL 60712.
www.metalarchitecture.com
March 2016
METAL ARCHITECTURE3
contents
16
Features
24
28
Worcester, Mass.
Departments
Editors Corner
Constructive Insights
9 Industry News
34 Market Feature: Sports & Recreation
44 New Products
32
4 METAL ARCHITECTURE
March 2016
www.metalarchitecture.com
+ Brightens Interiors
+ Absorbs Sound
+ 10 Year Limited Materials Warranty
+ Superior Performance
CODE HOTLINE
MEET CODE
CONTROL COSTS
CAPTURE INCENTIVES
800.255.0776 | thermaldesign.com
Circle #4 on reader service card.
online contents
volume 32 number 3
March 2016
Visit
www.MetalArchitecture.com
Features
Discover important factors you need to know when specifying rainscreen
connectors.
Learn tips and guidelines from the experts on how to specify MCM panels.
See how Paradise Valley Community College used metal to create an
integrated student center.
Learn how Delta Products Corp. used its own products and solutions in its new
LEED Platinum and net zero headquarter building.
Top Stories
Thomas Taylor discusses integrated delivery.
See the role metal plays in the newest education: K-12 projects.
Check out the welcoming and engaging design for the new Shriners Hospital
for Children in St. Louis.
Industry News
Check for the latest updates from the AIA, USGBC, MCA and more.
Social Media
Have you liked us on Facebook?
Followed us on Twitter and LinkedIn?
Have you read our blog? New posts are going up regularly.
We are now updating our social media channels with the latest news and
information.
You dont want to be left out of the conversation.
Manufacturers
Services that fit your needs
RESTAURANTS
MULTI-USE FACILITIES
Constructive Insights
Is LEED Certification
Worth It?
is not a sustainable solution.
LEED addresses a project with a multidisci-
By Thomas Taylor
high-efficiency filters.
yes.
their buildings:
electricity?
building.
sealed partitions.
construction.
ment.
to the project?
Those who have followed this path feel they reap all
pursue certification.
effort.
to each organization.
A 10-foot-long entryway system is at times difficult to make aesthetically pleasing. Plans and
8 METAL ARCHITECTURE
March 2016
www.metalarchitecture.com
Industry news
MCA releases specification guides AIA projects construction spending increase, design trends
The American Institute of Architects (AIA) reported
said.
Market Segment
Consensus Growth
Forecasts
2016
Overall nonresidential
building
8.3%
6.7%
Commercial/industrial
9.9%
7.5%
Hotels
14.8%
7.8%
Office space
12.8%
8.8%
Industrial facilities
11.9%
5.3%
Retail
7.5%
5.6%
Institutional
6.7%
6.7%
Amusement/recreation
11.2%
7.7%
Healthcare facilities
6.6%
6.9%
Education
6.5%
6.6%
Religious
2.6%
4.0%
Public safety
1.8%
4.2%
material (MCM) systems: Section 074213.234mm MCM System Specification and Section
074213.236-mm/8-mm MCM System Specification. They are available at www.metalconstruction.
org. The guides define performance criteria for
MCM panels, installation systems and system
fabricators.
The specifications define performance criteria
2017
miscellaneous materials.
Bobby Rozier
and needs.
www.metalarchitecture.com
March 2016
METAL ARCHITECTURE9
Industry news
CMD reports construction starts decrease
Norcross, Ga.-based Construction Market Data
Group LLC (CMD) reported nonresidential con-
org.
employment sub-categories.
said.
the curtainwall
curtainwall looks
on your building
change it again as
physical space.
you choose, he
said.
association.
10 METAL ARCHITECTURE
March 2016
www.metalarchitecture.com
INNOVATIVE.
INTELLIGENT.
EXTERIORS.
WHY DRI-DESIGN?
Dri-Design Tapered Series panels have the ability to
create a unique effect of rich texture, giving buildings
Industry news
AISI releases standard
landmark projects.
construction industry.
industry, he said.
leaders, historians, real estate brokers, preservationists, students, journalists and homebuyers can search
Michelle Musso
portions of AISI S213-07 w/S1-09, North American Standard for Cold-Formed Steel Framing
ton, she was a regional manager of inside customer sales and services, and a senior account
manager at Hilti Inc. in Tulsa, Okla.
12 METAL ARCHITECTURE
March 2016
www.metalarchitecture.com
Keeping Builders
on the Cutting Edge
CONTACT US TO LEARN MORE ABOUT BIM AND DISCOVER HOW YOU CAN BENEFIT FROM THIS GAME-CHANGING TECHNOLOGY.
www.americanbuildings.com
www.cbcsteelbuildings.com
Company
www.gsmnucor.com
www.kirbybuildingsystems.com
W W W. N U C O R B U I L D I N G S G R O U P. C O M
www.nucorbuildingsystems.com
Industry news
AAMA announces award winners
The American Architectural Manufacturers Associa-
Bill Deuschle
Roger LeBrun
this winter.
The distinguished service award for the architectural products group was presented to Roger
LeBrun, senior product certification engineer at
Greenwood, S.C.-based VELUX America Inc., by
Mark Silverberg
Rich Walker
March 2016
www.metalarchitecture.com
ing and Sealing Systems brochure which outlines its exterior, self-adhering
waterproofing products. The eight-page brochure highlights product categories
Dry Seal
EVENTS
March 10-15
Orlando, Fla.
(800) 828-1902
www.rci-online.org/internationalconvention.html
April 18-20
April 15-19
2-Piece,
Snap-Fit Molding
April 16-20
1-Piece,
Tight-Fit Molding
Dry Seal
Orlando, Fla.
(216) 241-7333
www.coilcoating.org/index.php/news/
events
Miami, Fla.
(703) 358-2960
www.aluminum.org/events/aluminumassociation-spring-meeting-2016
GoBeyondThePanel.com
See how we can take your ACM
project to the next level.
April 22-24
FLORIDA
PRODUCT
APPROVAL
800.523.2347
Circle #10 on reader service card.
www.metalarchitecture.com
March 2016
METAL ARCHITECTURE15
special feature
Reports on the commercial construction industry from 2015 have generally been positive
across the board, and the metal construction
industryas evidenced by the results of the
30th Annual Metal Architecture Architects Surveyfit neatly within those results. Through-
30th Annual
Metal Architecture
Architect Survey
in 2015 (which far outstripped Dodges anticipated 9 percent growth for the year.) FMI Corp.,
roof system
wall system
building system
framing system
2014
71.0%
59.1%
46.0%
54.0%
2015
75.6%
69.9%
49.4%
60.2%
2016
Projected
76.7%
68.8%
56.3%
67.0%
General Statistics
the West.
more than $10 million. For the most part, the firms
10 percent decline.
Company Type
East
South
Midwest
West
National
Architectural
51.2%
39.5%
57.1%
66.2%
55.0%
Design-Build
11.6%
18.6%
17.1%
5.9%
12.2%
Architectural/
Engineering
16.3%
18.6%
8.6%
7.4%
12.2%
Engineering
2.3%
7.0%
8.6%
4.4%
5.3%
Integrated
Construction
16.3%
11.6%
8.6%
13.2%
12.7%
Engineering/
Architectural
2.3%
4.7%
0.0%
2.9%
2.6%
16 METAL ARCHITECTURE
March 2016
www.metalarchitecture.com
Position in Firm
East
South
Midwest
West
National
Owner/Partner of Firm
55.8%
67.4%
57.1%
54.4%
58.2%
Company Management
18.6%
2.3%
5.7%
7.4%
8.5%
Head/Chief Architect
2.3%
0.0%
8.6%
2.9%
3.2%
Staff Architect
11.6%
14.0%
14.3%
11.8%
12.7%
Interior Designer
0.0%
0.0%
0.0%
0.0%
0.0%
Exterior Designer
0.0%
0.0%
0.0%
0.0%
0.0%
Specification Writer
2.3%
0.0%
5.7%
2.9%
2.6%
Engineer
0.0%
2.3%
0.0%
5.9%
2.6%
Architectural Intern
2.3%
0.0%
0.0%
0.0%
0.5%
Other
7.0%
14.0%
8.6%
14.7%
11.6%
Company Location
East
East
22.8%
South
(Va., Ky., Tenn., Ark., La., Miss., Ala., Ga.,
N.C., S.C., Fla., Okla., Texas)
22.8%
Midwest
(Minn., Iowa, Mo., Ill., Wis., Mich., Ind.,
Ohio, Neb., S.D., N.D., Kan.)
18.5%
West
(Idaho, Mont., Utah, Colo., Wyo., Calif.,
Nev., Ore., Wash., Hawaii, Alaska)
36.0%
South
Midwest
West
National
26.2%
16.3%
24.2%
29.9%
24.1%
38.1%
32.6%
15.2%
37.3%
30.8%
11.9%
14.0%
9.1%
10.4%
11.3%
4.8%
2.3%
9.1%
3.0%
4.8%
2.4%
0.0%
9.1%
3.0%
3.6%
9.5%
11.6%
21.2%
6.0%
12.1%
2.4%
11.6%
9.1%
4.5%
6.9%
2.4%
7.0%
3.0%
1.5%
3.5%
2.4%
4.7%
0.0%
1.5%
2.1%
0.0%
0.0%
0.0%
3.0%
0.7%
South
Midwest
West
National
Under $1 million
53.5%
51.4%
49.3%
47.5%
53.5%
$1 million to
$2.5 million
14.0%
20.0%
19.4%
16.3%
14.0%
$2,500,001 to
$5 million
14.0%
11.4%
4.5%
9.8%
14.0%
$5,000,001 to
$10 million
0.0%
8.6%
6.0%
6.6%
0.0%
More than
$10 million
18.6%
8.6%
20.9%
19.8%
18.6%
www.metalarchitecture.com
March 2016
METAL ARCHITECTURE17
special feature
Metal Roofing
Photo: Kason A. Knowles Fentress Architects
South
Midwest
West
steady.
Unsurprisingly, low-slope standing seam roofing is the most often specified type of metal roof, although batten seam shows significant participation.
Across the country, eastern architects show the most likelihood to specify
low-slope standing seam. That group is also more likely to specify metal
roofing for smaller buildings than other regions.
In total, about 40 percent of the metal roofing specified will be for buildings less than 10,000 square feet.
National
East
South
Midwest
West
National
2014
26.2%
35.4%
19.0%
33.4%
28.5%
2014
15.8%
27.2%
11.7%
15.0%
17.3%
2015
27.2%
35.6%
22.4%
34.4%
29.9%
2015
16.3%
26.5%
17.0%
16.8%
19.2%
Percent Change
3.8%
0.5%
15.4%
2.9%
4.7%
Percent Change
3.2%
-2.5%
31.2%
11.2%
9.2%
18 METAL ARCHITECTURE
March 2016
www.metalarchitecture.com
East
South
Midwest
West
National
Low-slope SSR
27.1%
22.7%
13.7%
17.9%
47.6%
Batten Seam
15.3%
19.3%
25.5%
15.9%
42.8%
Steep-slope SSR
16.9%
12.5%
5.9%
11.7%
28.3%
Corrugated
11.9%
19.3%
11.8%
17.9%
38.6%
10.2%
5.7%
15.7%
12.4%
25.5%
Thru-fastened Ribbed
8.5%
11.4%
11.8%
13.1%
27.6%
6.8%
5.7%
7.8%
5.5%
14.5%
Individual Shingles
3.4%
3.4%
3.9%
4.1%
9.0%
Stone-coated
0.0%
0.0%
3.9%
1.4%
2.8%
South
Midwest
West
National
More metal
roofing
31.3%
44.4%
32.1%
27.6%
33.1%
59.4%
44.4%
57.1%
63.8%
57.1%
9.4%
11.1%
10.7%
8.6%
9.7%
South
Midwest
West
National
Yes
37.9%
40.5%
31.0%
17.2%
29.4%
No
62.1%
59.5%
69.0%
82.8%
70.6%
South
Midwest
West
National
18.5%
5.7%
3.7%
5.4%
7.6%
50,000 to 79,999
square feet
14.8%
14.3%
0.0%
7.1%
9.0%
20,001 to 49,999
square feet
18.5%
22.9%
11.1%
14.3%
16.6%
20,000 to 10,000
square feet
18.5%
22.9%
33.3%
32.1%
27.6%
29.6%
34.3%
51.9%
41.1%
39.3%
www.metalarchitecture.com
March 2016
METAL ARCHITECTURE19
special feature
Photo: Gilbertson Photography
Metal wall panels showed a nice increase in the rate of specification for 2015
Those rates hold steading regardless of the regional of the country, although
compared to 2014. For new construction, the increase nationally totaled 7.6
The most often specified type of metal wall panels is concealed fastener
of metal wall panels in 2016, with more than a quarter indicating they will
(58.5 percent), while architects still have a high propensity to specify exposed
increase the rate, while a third suggest the rate will remain constant for 2016.
South
Midwest
West
National
24.3%
27.3%
67.6%
30.0%
34.1%
28.2%
30.3%
70.1%
31.8%
36.8%
14.0%
10.1%
3.7%
5.9%
7.6%
East
South
Midwest
West
National
2014
24.3%
27.3%
67.6%
30.0%
34.1%
2014
2015
28.2%
30.3%
70.1%
31.8%
36.8%
Percent Change
14.0%
10.1%
3.7%
5.9%
7.6%
20 METAL ARCHITECTURE
March 2016
www.metalarchitecture.com
East
South
Midwest
West
National
20.7%
23.2%
11.8%
10.0%
15.5%
2015
22.1%
25.3%
13.8%
12.5%
17.6%
Percent Change
11.2%
15.6%
12.2%
11.4%
12.8%
East
South
Midwest
West
National
Concealed fastening
19.5%
16.5%
20.6%
18.0%
58.5%
Exposed fastening
12.6%
15.5%
14.7%
14.9%
46.2%
Corrugated
13.8%
18.6%
17.6%
18.0%
54.6%
Metal-faced
composite
17.2%
9.3%
13.2%
9.9%
37.7%
Foam-core smooth
9.2%
8.2%
8.8%
2.5%
20.0%
Foam-core ribbed
6.9%
8.2%
5.9%
5.0%
20.0%
Steel/aluminum plate
4.6%
5.2%
2.9%
8.1%
18.5%
5.7%
6.2%
4.4%
8.1%
20.8%
Individual shingles
1.1%
5.2%
1.5%
3.7%
10.0%
Perforated/expanded
metal
9.2%
7.2%
10.3%
11.8%
31.5%
In last years survey, about 20 percent of our respondents reported they had
building systems in 2016, with more than a third anticipating specifying about
25 percent have specified a metal building system in the previous year. This
year, our respondents indicate that the 2015 number is actually a decline
compared to 2014. Both of those are for new construction. On the renova-
tion side, more than 10 percent of our respondents specified a metal building
specify in 2016. More than a third will specifying metal framing systems at
system in 2015, which was up more than 7 percent from the previous year.
East
South
Midwest
West
National
47.2%
29.2%
18.5%
18.6%
26.5%
2015
36.5%
23.8%
19.7%
20.8%
24.2%
Percent Change
-29.3%
-22.7%
5.9%
10.7%
-9.5%
www.metalarchitecture.com
March 2016
METAL ARCHITECTURE21
special feature
Percentage of Respondents Renovation Projects that
Include Metal Building Systems
East
South
Midwest
West
National
2014
11.6%
16.3%
7.6%
6.1%
11.6%
2015
12.5%
15.6%
11.5%
5.9%
12.5%
Percent Change
7.3%
-4.3%
34.2%
-2.1%
7.3%
South
Midwest
West
National
East
South
Midwest
West
National
40.0%
36.4%
23.1%
15.1%
26.3%
More metal
building systems
20.8%
25.0%
28.6%
15.1%
21.2%
More metal
framing systems
75.0%
65.6%
50.0%
75.5%
67.9%
60.0%
54.5%
69.2%
77.4%
67.2%
Less metal
building systems
4.2%
9.4%
21.4%
9.4%
10.9%
Less metal
framing systems
0.0%
9.1%
7.7%
7.5%
6.6%
Green Technologies
For the last several years, we have asked architects and designers whether
they will specifying metal building products as a way to achieve LEED designation for buildings, and over that time we have seen a regular decrease
in that likelihood. That trend reversed in 2015, and 34 percent of our respondents (compared to 26.3 percent in 2014) suggesting they will look to metal
building products to achieve LEED designation.
The reporting on cool metal roofing over the years has not suggested
a clear trend in any direction for architects preference for this technology.
The results of this years survey further muddy those waters, and the best
draw strong conclusions, with the majority of them (57.6 percent) saying
conclusion we can draw is that there is no real trend line for an increase or
22 METAL ARCHITECTURE
March 2016
www.metalarchitecture.com
(Note: Data for 2011, 2012, 2013 and 2014 are from the 2012, 2013, 2014
and 2015 surveys respectively.)
(Note: Data for 2011, 2012, 2013, and 2014 are from the 2012, 2013. 2014
2015
2014
2013
2012
Yes
34.0%
26.3%
33.1%
33.8%
43.4%
No
66.0%
73.7%
66.9%
66.2%
56.6%
2011
2015
2014
2013
2012
2011
Yes
38.6%
32.0%
26.8%
27.8%
28.3%
No
61.4%
68.0%
73.2%
72.2%
71.7%
(Note: Data for 2011, 2012, 2013 and 2014 are from the 2012, 2013, 2014
and 2015 surveys respectively.)
2015
A lot more
2014
2013
2012
2011
Yes
36.7%
41.6%
42.8%
50.2%
41.5%
No
63.3%
58.4%
57.2%
49.8%
58.5%
East
South
Midwest
West
National
11.1%
9.1%
0.0%
3.8%
5.8%
Some more
11.1%
15.2%
3.8%
28.3%
17.3%
When possible
59.3%
54.5%
69.2%
52.8%
57.6%
Less
3.7%
6.1%
0.0%
3.8%
3.6%
None
14.8%
15.2%
26.9%
11.3%
15.8%
www.metalarchitecture.com
March 2016
METAL ARCHITECTURE23
building profile
The S.E.R.T facility aspires to be a world-class model
of ecological construction and sustainable energy.
Environmental
Educator
Repurposed campus building provides sustainable design concepts, green-learning labs and energy-efficient features
By Mark Robins, Senior Editor
Engineering Technology
HVAC
March 2016
24 METAL ARCHITECTURE
The original, 21-year-old building still had its Butler Manufacturing MR-24 standing seam roof, which required
neither maintenance nor repairs for the renovation.
sources
Environmental Studies
Wind Energy and Turbine Technology classes
Learning Experience
www.metalarchitecture.com
Solar Solutions
in Shell Gray.
Sustainable, Educational
The S.E.R.T. Building is designed to be energy and
mechanically efficient, constructed using the LEED
rating system with sustainable, durable materials.
There are a variety of technologies within the
facility that are showcased. The focal point in the
center of the buildings atrium is the nacelle. The
windows.
www.metalarchitecture.com
March 2016
METAL ARCHITECTURE25
building profile
Daylighting system
Daylighting system adds natural daylight,
Photovoltaic panels
Solar energy powers rooftop units to cool the
Sunshades
shading device.
Geothermal heating/cooling
Geothermal heating and cooling is accomplished by
recirculating water through 60 wells that are 300 feet
deep in the ground.
26 METAL ARCHITECTURE
March 2016
www.metalarchitecture.com
Metal panels
Specially colored deep-blue, 26-gauge metal
panels reflect signature campus colors, and
provide product longevity and low maintenance.
Repurposed building
Utilizing an existing facility conserved and recycled
components, minimizing environmental impact.
Curtainwall
Aluminum curtainwall provides a connection to
the campus and employs a printed film graphic on
the east-facing glass for additional sun control.
www.metalarchitecture.com
March 2016
METAL ARCHITECTURE27
case study
Mesh as Canvas
Architects work with woven metal mesh manufacturer to customize fabric for their own office
By Harrison Horan
For more than 25 years, Simon Oswald Architecture (SOA) has operated on the principle that
good design is a thoughtful process that produces inspiring spaces. This principle is exemplified
in the firms new Columbia, Mo., office, completed in January 2015. There may not be a more
thoughtful process for an architectural firm than
designing their own space; a space that serves as
an example of their work and as a representation
of their identity.
The identity of SOA is one of timeless design
aesthetically appealing, but both functional and
cost-effective. To match this identity, SOA turned to
woven metal mesh, a beautiful but affordable material that has a wide variety of functions. The material
was chosen because it could create a partition
behind the offices reception area and simultaneously surround the firms 3-D logo, adding structure,
texture and elegantly showcasing the SOA logo.
through to the next space and creating a moir
A Design Challenge
more apparent.
feeling.
solution.
A Collaborative Process
performance goals.
application.
with them.
bankerwire.com.
March 2016
www.metalarchitecture.com
Signature Designs
Stainless steel mesh creates distinctive, high-tech design for new landmark bio building
Photo courtesy of Cambridge Architectural
By Matt OConnell
While touring Baxaltas bio-manufacturing plant
in Los Angeles, leadership at Georgias Quick
Start were struck by the heavy use of stainless steel throughout the facility. The glistening autoclaves, hoods, precision tools and
equipment soon became the inspiration for the
Atlanta-based architect Cooper Carrys design
and exterior branding of one of the firms newest
projectsthe Georgia BioScience Training Center.
Wrapped in an exterior veil of metal mesh
fabricated by Cambridge, Md.-based Cambridge
Architectural, the landmark facility, which opened
in September 2015, serves a dual function for the
state of Georgia: part work force training center for
bio-manufacturing employees; part recruitment tool
for attracting global biosciences firms to the state.
Recruitment Tool
Georgia enhanced its reputation as one of Americas
best states for doing business by winning a 2012
competitive bid for the new $1 billion Baxalta immunoglobulin therapies plant. One of the states key
incentives was the promise to build a $14 million
workforce training center initially dedicated to new
weave.
repeats.
Baxalta employees.
Operated by Georgia Quick Start, a division
shades.
The mesh is attached to the structure using
Clevis, a fully engineered, in-tension system designed by Cambridge.
Inside Georgia BioScience, Matte, a Cambridge
flexible mesh pattern similar to Lanier, was used to
surround an open air, elliptical courtyard that is the
to nature.
The choice of a hand-woven stainless steel exterior veil offered the versatility of aesthetic benefits
combined with solar shading, daylighting and solar
heat-gain reduction.
March 2016
METAL ARCHITECTURE29
case study
permanency.
expansion.
ECO-ROCK wire mesh is made with an intercrimp weave and is available for breadths of 4 to 12
of the air.
look.
www.mcnichols.com.
30 METAL ARCHITECTURE
March 2016
www.metalarchitecture.com
architect profile
A Calling Fulfilled
A love of history and architecture drives architect Kathryn Crocketts work
By Marcy Marro, Editor
Everyone takes a different career path to get to
where theyre meant to be. While some people
know from an early age what they want to do
Kathryn Crockett
historical houses.
with their life and aim right for it, others take a
AIA, LEED AP, vice president of Lamoureux Pagano Associates in Worcester, Mass., to become
that.
Changing Directions
After realizing she wasnt feeling fulfilled in her ca-
Early Inspiration
32 METAL ARCHITECTURE
March 2016
www.metalarchitecture.com
architecture.
Arch
Connect
What kind of music do you listen to?
Community Involvement
communities?
Metal Inspiration
years.
she says.
State University.
When she became president at Mechanics Hall,
Crockett says it gave her the opportunity to develop
leadership skills outside of the office. I believe that
is something that I have transferred to my position
here, she says. I learned a tremendous amount
through that [experience].
While her career took a bit of a turn before
eventually settling into the role of architect, Crockett
says she feels like shes in the right place. I have
never questioned am I in the right career, which
is a fabulous place to be, she says. And I dont
think about what else I could be doing because Ive
already done that and I wasnt fulfilled. So I have
that as a comparison. I think thats actually a good
life experience.
www.metalarchitecture.com
March 2016
METAL ARCHITECTURE33
market feature
34 METAL ARCHITECTURE
March 2016
www.metalarchitecture.com
www.metalarchitecture.com
March 2016
METAL ARCHITECTURE35
market feature
Metal roof panels: Petersen Aluminum Corp., Elk Grove Village, Ill., www.pac-clad.com, Circle #26
March 2016
www.metalarchitecture.com
Metal distinguishes
cycling facility
CannonDesign Inc. designed Mattamy National Cycling Centre, Milton, Ontario,
Canada, with a cylindrical exterior wrap around a Union Cycliste Internationalecertified category 1 indoor cycling track. Kingspan Insulated Panels Inc.s KS MicroRib and Optimo Embossed insulated metal panels (IMPs) in Ascot White, Driftwood
and Zinc Grey were installed vertically and horizontally on the three-story velodrome.
Andrew Toma, business development manager at Kingspan Insulated Panels, says,
Trying to work with a continuous radius around the building meant 36-inch module
panels were needed.
March 2016
METAL ARCHITECTURE37
market feature
38 METAL ARCHITECTURE
March 2016
www.metalarchitecture.com
March 2016
METAL ARCHITECTURE39
market feature
Metal combines
university athletic
center services
Three athletic buildings were connected into a single facility for
Embry-Riddle Aeronautical Universitys Athletics Center
renovation project in Prescott, Ariz., completed in January 2015.
W. Alan Kenson and Associates P.C., the architecture firm for the
project, specified MBCIs Artisan Series, LokSeam, SuperLok and
Ultra-Dek metal roof panels in Copper Metallic and Galvalume. Additionally, MBCIs PBU panels were reverse rolled and used for the
interior liner and soffit, and MBCIs 7.2 metal wall panels and PBC
metal wall panels were used for the walls. The project includes a
new fitness center, basketball court and bleachers, trainer facilities
and equipment for the weight room.
Architect: W. Alan Kenson and Associates P.C., Prescott, Ariz.
Metal roof/wall panels: MBCI, Houston, www.mbci.com, Circle #31
40 METAL ARCHITECTURE
March 2016
www.metalarchitecture.com
March 2016
METAL ARCHITECTURE41
market feature
42 METAL ARCHITECTURE
March 2016
www.metalarchitecture.com
The Pavilion at Ole Miss basketball arena in Oxford, Miss., with a curved and colonnaded entrance
faade that relates with its curved roof. The facility
consists of a three-story, structural steel frame supporting steel trusses. AECOM Technology specified
ACI Building Systems LLCs UltraLok Roof System
with Valspar Corp.s Fluropon coating in Terra Cotta
for the roof. The 18-inch by 2-inch mechanically
seamed UltraLok Standing Seam Panels have
factory-installed sealant.
The 225,000-square-foot, $96.5 million facility
was completed in January 2016. It has 9,500 seats
and 1,700 premium seats. The Pavilion at Ole Miss
features a student concourse and three club areas.
It is home to the mens and womens basketball
program and hosts graduation ceremonies, concerts
and university-wide events.
Stopped Progress?!
Keep Working With Easy To Use
Flex-C Trac
Metal roof panels: ACI Building Systems LLC, Batesville, Miss., acibuildingsystems.com, Circle #38
March 2016
METAL ARCHITECTURE43
Product Catalog
new products
Ceiling panels simulate wood
Armstrong Ceiling and Wall Systems MetalWorks BladesClassics ceiling panels are avail-
able in six Effects Wood Looks finishes: Maple, Oak, Cherry, Dark Cherry, Walnut and Wal-
nut Espresso. Blades are 1-inch-thick, 4 inches deep by 96 inches long, and may be joined
www.atas.com/perimeter-edge |
Circle #40
metal ceiling panels and ceiling suspension systems are available in a variety of hues and 34 Color-All colors. The metal ceiling panels are available in metallic color finishes, Woodscenes
painted finishes and Metalwood wood-grain finishes.
www.rockfon.com | Circle #43
44 METAL ARCHITECTURE
March 2016
www.metalarchitecture.com
CENTRIA
AEP Span Prestige Series concealed fastener metal wall panel system is available in 1-inch,
2-inch, 6-inch reveal and 12-inch without a reveal. Panels have 12-inch coverage with a 1
1/2-inch depth. They can be horizontally or vertically oriented and mixed for design options.
Structural performance data for Prestige Series is contained within an International Building
ed, light-gauge aluminum or natural finish metal and create contemporary aesthetics. Intercept Modular Metal Panel Systems
www.pac-clad.com |
Circle #45
McElroy Metal
McElroy Metal MSR concealed fastener metal wall panels are 16 inches wide, have 3-inchdeep ribs and are available in lengths up to 40 feet. MSR metal wall panels are produced
in 24-gauge or 22-gauge Galvalume. They are available in McElroy Metals polyvinylidene
fluoride (PVDF) coatings.
www.mcelroymetal.com |
Circle #46
www.metalarchitecture.com
March 2016
METAL ARCHITECTURE45
PRODUCT catalog
Fasteners
Dynamic Fastener
Dynamic Fasteners multiple fasteners with a zinc cast head will not rust. They are made of
Zamak-5 zinc alloy. The line includes pole barn screws, T-1 stitch screws, T-3 metal-to-metal
They are produced with carbon steel or stainless steel and are
offered in Grade 5 and Grade 8.2. Additionally, Serrated flange
nuts are available.
www.dynamicfastener.com |
Circle #49
46 METAL ARCHITECTURE
March 2016
www.metalarchitecture.com
ad index
Company
Page
Phone
Website
Circle #
IBC
(800)343-4146
www.convention.aia.org
15
(800)422-7270
www.alpolic-americas.com
Dri-Design
11 (616)355-2970
14
(800)558-5895
Flex-Ability Concepts
43
(866)443-3539
Flexospan
31 (800)245-0396
BC
(800)542-2379
www.kingmetals.com
16
Laminators Inc.
15
(800)523-2347
www.laminatorsinc.com
10
Lamtec Corp.
(800)852-6832
www.lamtec.com
McNichols Co.
39
(800)237-3820
www.mcnichols.com
12
Moz Designs
(510)632-0853
www.mozdesigns.com
qbrown@moderntrade.com, ext. 28
13
(260)837-7891
www.nucorbuildingsgroup.com
(800)PAC-CLAD
www.pac-clad.com
Sales
41
(866)454-1600
www.rmsteel.com
13
Thermal Design
(800)255-0776
www.thermaldesign.com
IFC
(855)426-7836
www.paintedrustedroofing.com
www.dri-design.com
Volume 32 Number 3
Editorial
www.plyco.com
www.flexabilityconcepts.com
14
www.flexospan.com
11
pdeffenbaugh@moderntrade.com, ext. 19
Marcy Marro, Editor
mmarro@moderntrade.com, ext. 25
Mark Robins, Senior Editor
mrobins@moderntrade.com, ext. 27
Christopher Brinckerhoff, Associate Editor
cbrinckerhoff@moderntrade.com, ext. 26
bobhiggins@moderntrade.com, ext. 22
Art Mazzone, Regional Sales Manager
artmazzone@moderntrade.com, ext. 23
Business
Classified advertising rates are $110 per column inch for black and white or $145 for color, up to a total of 5 column inches per page.
jplawrence@moderntrade.com
johnlawrence@moderntrade.com
Circulation audited by
www.metalarchitecture.com
March 2016
METAL ARCHITECTURE47
TOP honors
Contemporary Design
Metal panels create a modern medical center
the project.
aesthetician room.
Awards: 2015 AIA East Tennessee Peoples Choice Award and 2015 AIA East Tennessee Chapter Choice Award
Metal wall panels: ALPOLIC-Mitsubishi Plastics Composites America Inc., Chesapeake, Va., www.alpolicamericas.com, Circle #54
Standing seam metal panels: Metal Roofing Systems Inc., Stanley, N.C., metalroofingsystems.biz, Circle #55
Storefront: Kawneer Co. Inc., Norcross, Ga., www.kawneer.com, Circle #56
48 METAL ARCHITECTURE
March 2016
www.metalarchitecture.com
A portion of every dollar spent supports The Red Cross, National Cancer Society
American Diabetes Association, Habitat for Humanity and Wounded Warrior Project.
Circle #16 on reader service card.