Académique Documents
Professionnel Documents
Culture Documents
2.1
A.T.
CSTB
SLOPE
0%
@@@
@@@@@@
@@@
@@@@@@
@@@
@@@@@@
@@@
@@@@@@
@@@@@@
Concrete deck
UT
D O CE
E
I
R
AR QUEN
EC
O B RED SE
T
K
R
E
WO NUMB
HE
T
IN
EXPANSION JOINT
@@@
@@@
@@@@@
@@@
@@@
@@@@@
@@@
@@@
@@@@@
@@@
@@@
@@@@@
@@@
@@@@@
10
30 mm
5 Underlay PAREQUERRE
PENETRATION
@@@
@@@@@
@@
@@@
@@@@@
@@@
@@@@@@@@
@@@
@@@@
@@@@@
@@@
@@@@
@@@
@@@@@@@@
@
7
150 mm
150 mm
NOTICES
1. If slope > 40 %, mechanical fixings are mandatory at PARADIENE 30 laps, spaced every 200 mm.
2. If slope > 100 %, the length of the membrane shoud not be more than 5 m.
3. If slope < 20 %, PARADIENE S R3 could be fixed with spots of COLLE PAR adhesive.
4. Warning: PARADIENE S R3 is fully torched (without PERFADER) on a 400 mm strip around all perimeters, rain water outlets and upstands.
2.2
A.T.
CSTB
SLOPE
0%
@@@@@@
@@@@@@
@@@@@@
@@@@@@
@@@@@@@
Insulation board: bitumen surfaced mineral wool, fully bonded with hot bitumen
Concrete deck
1 Primer: SIPLAST
JOINT DEPRIMER
DILATATION 2/2 bis
T
OU
IED NCE
ARR
E
C
E
QU
O B ED SE
R
RK T
E
B
O
W
NUM
HE
IN T
EXPANSION JOINT
@@@
@@@@@
@@@
@@@@@
@@@
@@@
@@@@@
@@@
@@@
@@@@@
@@@
@@@
@@@@@
@@@
11
30 mm
@@@
@@@
@@@@
@@@
@@@
@@@@
@@@
PENETRATION
4
@@
@@@
@@@@
@@@ @
@@@
@@@@
@@
150 mm
150 mm
NOTICES
1. If slope > 40 %, mechanical fixings are mandatory at PARADIENE 30 laps, spaced every 200 mm.
2. Other allowed insulation boards: bitumen surfaced perlite, and bitumen surfaced composite, (see technical agrement of the insulation board).
3. Polyurethanne adhesive or mechanical fixing could be used as alternatives to fix the mineral wool onto the vapour barrier.
2.3
A.T.
CSTB
SLOPE
0%
@@@
@@@@@@
@@@
@@@@@@
@@@
@@@@@@
@@@
@@@@@@
@@@@@@
Old waterproofing
Concrete deck
EXPANSION JOINT
@@@
@@@@@
@@@
@@@
@@@@@
@@@
@@@
@@@@@
@@@
@@@
@@@@@
@@@
10
30 mm
5 Underlay PAREQUERRE
@@
@@@
@@@@
@@
@@@
@@@@
@@
@@@
@@@@
@@
PENETRATION
@@
@@@
@@@@
@@@
@@@@
@@@
@@@@ @@@@
150 mm
NOTICES
1. If slope > 40 %, mechanical fixings are mandatory at head laps, spaced every 200 mm.
2. Warning: PARADIENE S R3 is fully torched (without PERFADER) on a 400 mm strip around all perimeters, rain water outlets and upstands.
3. On old mineral self protected waterproofing: apply SIPLAST PRIMER.
On old metal self protected waterproofing: remove the metal foil.
4. Removing the old upstand is mandatory.
5. If slope < 20 %, PARADIENE S R3 could be fixed with spots of COLLE PAR adhesive.
6. If slope > 100 %, the length of the membrane should also not be more than 5 m.
7. Removing the old upstand is mandatory.
150 mm