Académique Documents
Professionnel Documents
Culture Documents
Manual A120
cONTENTS
SERIES 70 SHORT cATcH OVERSHOTS
Overview................................................................................1
Construction ..........................................................................1
Operation...............................................................................1
Catching a Fish ..................................................................1
Releasing a Fish ................................................................1
Precautions .......................................................................... 1
Maintenance ..........................................................................1
Disassembly.......................................................................1
Illustration ..............................................................................2
Complete Assemblies and Parts Lists .............................3 4
Calculated Strengths .............................................................5
LEgAL NOTIcE
All references to Bowen part numbers in this literature are
used to identify interchangeable tools and parts. Reference to
such tools and parts does not imply that Logan Oil Tools is a
licensee or is in any way affiliated with National Oilwell Varco.
Logan Oil Tools does not sell, or offer to sell, National Oilwell
Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
3rd Printing, August 2012. Rev. 2
Logan Series 70 Short catch & Series 150 Releasing & circulating Overshots
Manual A120 Series 70 and 150 Overshots Page 1
OVERVIEW
The Logan Series 70 Short Catch Overshot is designed for conditions when the
fish is too short to be engaged with a
standard overshot. The grapple control
is positioned above the basket grapple
rather than below it to allow the basket
grapple to occupy the lowest position in
the bowl. This enables the overshot to
firmly engage and retrieve a very short
fish.
CONSTRUCTION
The Logan Series 70 Short Catch Overshot assembly consists of a top sub,
bowl, basket grapple control, and
a basket grapple. This overshot has no
guide. The basket grapple is inserted
into the bowl from the top. The design
of the bowl allows the basket grapple
to fit in the lowest position. The basket
grapple control finger then fits into the
top of the basket grapple.
OPERATION
Before making up the overshot on the
fishing string and running it into the
well, be sure the overshot is properly
assembled and dressed with the proper
size grapple. Each Logan Series 70
Short Catch Overshot is designed to engage a specific maximum outside diameter. Each overshot can be dressed to
engage any smaller diameter by installing the desired size of basket grapple.
Refer to the Parts Lists on pages 3 4.
Check to make sure all of the components are in good working order. Make
up the overshot on the fishing string and
run it into the well. Although the Series
70 Overshot has no guide, the components function in the same manner as
the standard Logan Series 150 Releasing and Circulating Overshot.
PRECAUTIONS
Never rotate the fishing string to the
left while the overshot is engaged with
the fish unless an upward strain is
maintained.
Always bump down the full weight of
the fishing string before starting releasing operations.
MAINTENANCE
Maintenance is simple, but important
to prolong the life of the tool and guard
against mis-runs. Disassemble and
inspect the tool after each use. Check
the grapple wickers for dullness and
replace if necessary. Make other repairs
as required and reassemble.
Paint or grease the exterior of the overshot to prevent rust or deterioration.
Disassembly
1. Using a vise, clamp the bowl between the threaded ends. Remove
the top sub by breaking loose the
threaded connections between the
top sub and bowl.
Top Sub
Bowl
Basket Grapple
Logan Oil Tools reserves the right to change or discontinue designs without notice.
1-5/8
2-5/16
SH
2-1/2
3-5/8
SH
2-5/8
3-3/4
SH
3-1/16
3-15/16
SH
3-1/16
4-5/8
FS
3-1/16 *
4-1/8
SH
3-3/8
4-3/8
SH
COMPLETE ASSEMBLY
TOP SUB
C1000
38507
C2000
38508
C3000
38509
C4000
38510
C1001
17616
C2001
17617
C3001
17618
C4001
17619
C1002
13536
C2002
13537
C3002
13538
C4002
13539
C10025
63893
C20025
63894
C30025
63895
C40025
63896
C1003
11295
C2003
11291
C3003
11292
C4003
11294
C1004
10435
C2004
10436
C3004
10437
C4004
10438
C10045
A-11024
C20045
B-11025
C30045
B-11026
C40045
A-11027
3-21/32
4-11/16
SH
3-21/32
5-5/8
FS
3-3/4
4-3/4
SH
3-3/4
5-1/2
FS
4-1/4
5-3/4
FS
4-3/4
5-7/8
SH
5-1/4
6-1/4
SH
BOWL
BASKET GRAPPLE
BASKET GRAPPLE CONTROL
TOP SUB
C1005
10544
C2005
10545
C3005
10546
C4005
10547
BOWL
BASKET GRAPPLE
BASKET GRAPPLE CONTROL
C1006
11298
C2006
11299
C3006
11300
C4006
11301
C1005
10544
C2007
12646
C3007
12647
C4007
12648
C1008
12786
C2008
12787
C3008
12788
C4008
12789
C1009
13066
C2009
13067
C3009
13068
C4009
13069
C1010
10561
C2010
10562
C3010
10563
C4010
10564
C10105
14806
C20105
14807
C30105
14808
C40105
14809
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Notes: Grapples are available in 1/16" intervals.
* 3-1/8" special basket grapple available for assembly 170-413-D.
Logan Coding
A = FS
Full Strength For all pulling torsional and jarring strain
B = XFS Extra Full Strength For extreme abuse
C = SFS Semi Full Strength Maximum strength for special hole conditions
D = SH
Slim Hole For heavy pulling strains only
E = XSH Extra Slim Hole For pick up jobs only
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
4-3/4
6-5/8
FS
6
7-5/8
FS
6-1/4
7-7/8
FS
6-1/2
8-1/4
FS
7
8-1/2
FS
7-3/4
9-1/4
FS
8
9-3/4
FS
COMPLETE ASSEMBLY
TOP SUB
C1011
11304
C2011
11305
C3011
11306
C4011
11307
C1012
11631
C2012
11632
C3012
11633
C4012
11634
9
11-1/4
FS
13-1/2
16
BOWL
BASKET GRAPPLE
BASKET GRAPPLE CONTROL
170-1125-A 170-1600-A
33878
TOP SUB
C1018
33879
C2018
33880
C3018
33881
C4018
33882
BOWL
BASKET GRAPPLE
BASKET GRAPPLE CONTROL
C1013
16976
C2013
16977
C3013
16978
C4013
16979
C1014
38940
C2014
38941
C3014
38942
C4014
38943
C1015
20051
C2015
20052
C3015
20053
C4015
20054
C1016
25031
C2016
25032
C3016
25033
C4016
25034
C1017
20061
C2017
20062
C3017
20063
C4017
20064
C1019
C2019
C3019
C4019
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Notes: Grapples are available in 1/16" intervals.
Logan Coding
A = FS
Full Strength For all pulling torsional and jarring strain
B = XFS Extra Full Strength For extreme abuse
C = SFS Semi Full Strength Maximum strength for special hole conditions
D = SH
Slim Hole For heavy pulling strains only
E = XSH Extra Slim Hole For pick up jobs only
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
CALCULATED STRENGTHS
MAXIMUM CATCH SIZE (Basket)
OVERSHOT
O.D.
CALCULATED
STRENGTHS
COMPLETE ASSEMBLY
Logan Part No.
MAXIMUM CATCH SIZE (Basket)
Bowen No.
OVERSHOT O.D.
BOWL
Logan Part No.
COMPLETE ASSEMBLY
Logan Part No.
Bowen No.
Bowen No.
BASKET GRAPPLE LOAD CAPACITY @ YIELD POINT (LBS):
BOWL
Logan Part No.
MAX. CAPACITY WITH STOP
Bowen No.
MIN. CAPACITY WITHOUT STOP
BASKET GRAPPLE LOAD CAPACITY @ YIELD POINT (LBS):
MAX. MAKE-UP TORQUE 50% OF YIELD (FT/LBS)
MAX. CAPACITY WITH STOP
MIN. CAPACITY WITHOUT STOP
MAX. MAKE-UP TORQUE 50% OF YIELD (FT/LBS)
1-5/8
2-5/16
170-231-D
1-5/8
38506
2-5/16
C2000
170-231-D
38508
38506
C2000
38508
85,200
600
85,200
600
2-1/2
3-5/8
170-363-D
2-1/2
17615
3-5/8
C2001
170-363-D
17617
17615
C2001
17617
263,600
2,550
263,600
2,550
2-5/8
3-3/4
170-375-D
2-5/8
13535
3-3/4
C2002
170-375-D
13537
13535
C2002
239,800
13537
239,800
2,800
239,800
239,800
2,800
3-1/16
3-15/16
170-394-D
3-1/16
63892
3-15/16
C20025
170-394-D
63894
63892
C20025
63894
224,600
224,600
3-1/16
4-5/8
170-463-A
3-1/16
11290
4-5/8
C2003
170-463-A
11291
11290
C2003
398,100
11291
398,100
398,100
398,100
3-1/16
4-1/8
170-413-D
3-1/16
10434
4-1/8
C2004
170-413-D
10436
10434
C2004
212,700
10436
212,700
4,000
212,700
212,700
4,000
3-3/8
4-3/8
170-438-D
3-3/8
C-11023
4-3/8
C20045
170-438-D
B-11025
C-11023
C20045
B-11025
250,300
4,600
250,300
4,600
3-21/32
4-11/16
Logan Part No.
170-468-D
3-21/32
Bowen No.
10543
4-11/16
Logan Part No.
C2005
Logan Part No.
170-468-D
Bowen No.
10545
Bowen No.
10543
BASKET GRAPPLE LOAD CAPACITY @ YIELD POINT (LBS):
BOWL
Logan Part No.
C2005
MAX. CAPACITY WITH STOP
197,600
Bowen No.
10545
MIN. CAPACITY WITHOUT STOP
197,600
BASKET GRAPPLE LOAD CAPACITY @ YIELD POINT (LBS):
MAX. MAKE-UP TORQUE 50% OF YIELD (FT/LBS)
5,000
MAX. CAPACITY WITH STOP
197,600
MIN. CAPACITY WITHOUT STOP
197,600
MAX. MAKE-UP TORQUE 50% OF YIELD (FT/LBS)
5,000
3-21/32
5-5/8
170-563-A
3-21/32
11297
5-5/8
C2006
170-563-A
11299
11297
C2006
635,700
11299
790,500
635,700
790,500
3-3/4
4-3/4
170-475-D
3-3/4
12645
4-3/4
C2007
170-475-D
12646
12645
C2007
267,100
12646
267,100
267,100
267,100
3-3/4
5-1/2
170-550-A
3-3/4
12785
5-1/2
C2008
170-550-A
12787
12785
C2008
504,500
12787
558,100
504,500
558,100
4-1/4
5-3/4
170-575-A
4-1/4
13065
5-3/4
C2009
170-575-A
13067
13065
C2009
467,400
13067
575,600
7,400
467,400
575,600
7,400
4-3/4
5-7/8
170-587-D
4-3/4
10560
5-7/8
C2010
170-587-D
10562
10560
C2010
306,200
10562
348,200
306,200
348,200
5-1/4
6-1/4
170-625-D
5-1/4
14805
6-1/4
C20105
170-625-D
14807
14805
C20105
14807
319,700
8,100
319,700
8,100
6
7-5/8
170-763-A
6
11630
7-5/8
C2012
170-763-A
11632
11630
C2012
358,000
11632
445,300
12,500
358,000
445,300
12,500
6-1/4
7-7/8
170-787-A
6-1/4
16975
7-7/8
C2013
170-787-A
16977
16975
C2013
349,200
16977
445,700
349,200
445,700
6-1/2
8-1/4
170-825-A
6-1/2
38939
8-1/4
C2014
170-825-A
38941
38939
C2014
38941
445,100
22,000
445,100
22,000
7
8-1/2
170-850-A
7
20050
8-1/2
C2015
170-850-A
20052
20050
C2015
285,100
20052
373,700
24,200
285,100
373,700
24,200
7-3/4
9-1/4
170-925-A
7-3/4
25030
9-1/4
C2016
170-925-A
25032
25030
C2016
25032
391,700
27,800
391,700
27,800
8
9-3/4
170-975-A
8
20060
9-3/4
C2017
170-975-A
20062
20060
C2017
20062
445,100
30,800
445,100
30,800
4-3/4
6-5/8
Logan Part No.
170-663-A
4-3/4
Bowen No.
11303
6-5/8
Logan Part No.
C2011
Logan Part No.
170-663-A
Bowen No.
11305
Bowen No.
11303
BASKET GRAPPLE LOAD CAPACITY @ YIELD POINT (LBS):
BOWL
Logan Part No.
C2011
MAX. CAPACITY WITH STOP
579,400
Bowen No.
11305
MIN. CAPACITY WITHOUT STOP
720,600
BASKET GRAPPLE LOAD CAPACITY @ YIELD POINT (LBS):
MAX. MAKE-UP TORQUE 50% OF YIELD (FT/LBS)
9
13-3/8
11-1/4
16
Logan Part No.
170-1125-A 170-1600-A
9
13-3/8
Bowen No.
33878
11-1/4
16
Logan Part No.
C2018
C2019
170-1125-A 170-1600-A
Logan Part No.
Bowen No.
33880
Bowen No.
33878
Bowen No.
33880
Notes:
MAX.
MAKE-UP
50%
OF YIELD
(FT/LBS)
42,000within 55,500
1)
All strengths
areTORQUE
calculated
theoretical
yield
points and are accurate
20%. All strengths assume a straight, steady pull and
full grapple engagement of a round fish. Anything less than straight pulling or full engagement will substantially reduce the strength.
Notes:
marksare
should
be applied
to the bowl.
Tong
marks
surface
damage
to strengths
the bowl will
also reduce
the steady
strength.
2)
1) No
All tong
strengths
calculated
theoretical
yield
points
and and
are other
accurate
within
20%. All
assume
a straight,
pull and
full grapple engagement of a round fish. Anything less than straight pulling or full engagement will substantially reduce the strength.
3) Maximum recommended makeup torque is 50% of yield. Less torque may be used depending upon the situation.
2) No tong marks should be applied to the bowl. Tong marks and other surface damage to the bowl will also reduce the strength.
4) Jarring may amplify the pull load by a factor of 3 to 10.
3) Maximum recommended makeup torque is 50% of yield. Less torque may be used depending upon the situation.
LEGAL NOTICE All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference
4) Jarring may amplify the pull load by a factor of 3 to 10.
Logan
Series
70 Oilwell
Short Catch
Overshots
5
to
such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated
with
National
Varco. Logan
Oil
Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Bowen is a registered trademark of National Oilwell Varco.
Logan Series 70 Short Catch Overshots 5
Top Sub
Type A Packer
Type A Packer
Bowl
Spiral Grapple
Spiral Grapple Control
Standard
Cut-lipped Guide
Spiral Grapple
Top Sub
Bowl
Basket Grapple
Basket Grapple
Outer Seal
Inner Seal
OVERVIEW
The Logan Series 150 Releasing and
Circulating Overshot is the most versatile and commonly used fishing tool in
the industry. It is designed to externally
engage, pack-off, retrieve, and release
various types of fish, including tubing,
casing, drill pipe, drill collars, couplings,
and tool joints that have been lost
or twisted off or need to be removed
from the wellbore. It is engineered to
withstand heavy pulling, torsional and
jarring strains without damaging or
distorting the tool or the fish. Its rugged
construction, simplicity, and strength
make the Logan Series 150 Releasing
and Circulating Overshot the standard
choice among all external catch fishing
tools.
USE
The Logan Series 150 Releasing and
Circulating Overshot is designed to externally engage, pack-off, retrieve, and
release various types of fish, including
tubing, casing, drill pipe, drill collars,
couplings, and tool joints that have
been twisted off or need to be removed
from the wellbore.
Each overshot is designed to engage,
pack-off, and pull a specific size of
tubing, casing, drill pipe, drill collars,
couplings, and tool joints, or other tools
with smooth outer diameters. With the
installation of proper undersize parts,
they may be adapted to engage and
pack-off smaller sizes.
COMPONENTS
Gripping and Releasing Mechanism
Top Sub
The top sub is the uppermost component of the overshot assembly. It is
equipped with a customer specified box
connection to assure proper make-up
with the fishing string.
Bowl
The bowl, the major working component
of the overshot, is located between the
top sub and the guide.
The inside diameter features a helix
section that conforms to the exterior
helix of the grapple. This design permits
any expansion or compression strain
to be evenly distributed over the entire
working surface of the bowl, grapple,
and the fish. Any possible damage to
the fish or overshot is minimized.
Guide
The lowermost component of the overshot assembly is the guide. As its name
implies, it guides the fish into the internal gripping mechanism (grapple) of
the overshot. The guide also minimizes
possible damage to the overshot by
blocking the entry of a fish that exceeds
the maximum catch size of the overshot.
Grapples
The grapple fits into the bowl and is the
gripping mechanism of the overshot.
There are two basic types of grapples:
spiral and basket.
Spiral Grapple
The left-handed, helix shape of the
spiral grapple conforms to the tapered
interior helix of the bowl. The specially
hardened interior wickers of the grapple
assure positive engagement with the
fish.
Basket Grapple
with Short-Catch Stop
This grapple is used to retrieve couplings that are attached to a ruptured
section of pipe that protrudes above the
coupling. Two sets of wickers, each with
a different inside diameter, are utilized.
The smaller diameter threads catch the
pipe above the collar and provide a stop
so that the coupling can be engaged
by the larger set of threads before being
packed-off by a control packer.
Basket Grapple
Basket Grapple
The basket grapple is a slotted, expandable cylinder with a wickered interior
to engage the fish. Its tapered exterior
conforms to the interior of the bowl.
To meet the needs of various fishing
operations, three types of basket grapples are available: plain (standard),
short-catch stop, and long-catch stop.
Plain Basket Grapple
The plain basket grapple is used when
the milling operation has preceded the
fishing operation. This type of basket
grapple is used to retrieve fish with a
uniform outside diameter. During fishing
operations, the fish passes completely
through the grapple. Wickers running
the entire interior length of the grapple
securely grip the fish. The plain basket
grapple is standard equipment on all
overshots and will always be furnished
unless another type is specified.
Basket Grapple
with Long-Catch Stop
This type of basket grapple is designed
to retrieve tool joints and collars with
sufficient length remaining below the
grapple to allow pack-off with a plain
or mill control packer. The internal
shoulder at the upper end of the grapple prevents the fish from completely
passing through it. This shoulder also
positions the basket control packer
around the fish for optimum pack-off.
Grapple Controls
A grapple control acts as a key that
transmits torque from the overshot bowl
to the grapple while allowing the grapple to move vertically inside the bowl
during operation. There are two types
of grapple controls: spiral and basket.
Spiral grapple controls are used with
spiral grapples and are always plain.
Basket grapple controls are used with
basket grapples.
Pack-off Mechanism
If circulation is required during the fishing operation, a pack-off mechanism
is required to assure circulation goes
through rather than around the fish. The
type of grapple (spiral or basket) being
used will determine which type of packoff mechanism is used.
Type A Packer
Type A Packer
A Type A packer is used on overshots
equipped with spiral grapples. The Type
A packer sleeve seals its outer diameter against the inside of the bowl. It
has an internal lip that seals around the
fish. Each Type A packer is designed
to pack-off the specific catch size of
each spiral grapple and one should be
ordered for each size grapple.
OPERATION
Outer Seal
Inner Seal
CAUTION: Always shut off the circulating pumps before lowering the
overshot over the fish.
Never rotate the fishing string to the
left while the overshot is engaged
with a fish unless an upward strain
is maintained.
Subsea Retrieval
On offshore floating rigs, drill string
extends hundreds of feet from the rig
to the wellhead blowout preventer
(BOP) on the sea floor. Sometimes it
is necessary for the rig to move (in the
event of a blowout, an approaching
storm, or drifting due to loss of anchor)
from a well site. In these situations, the
drill string can be temporarily severed
inside the BOP to remove only the upper end.
The BOP must have at least two sets
of rams a set of lower pipe rams and
set of shear rams above them. Land the
closest tool joint on the lower pipe rams.
Close the lower pipe rams to suspend
and pack-off the string before shearing. Shearing produces flattened, flared
ends with protruding ears.
The string is retrieved when the rig
returns to the well site. The end is
brought to the surface and the sheared
piece is removed. Often large sections
of the BOP stack must be brought to the
surface as well for effective retrieval,
making subsea sheared pipe retrieval
a costly, difficult, and time-consuming
task.
By removing the standard guide, grapple, and packer, the Logan Series 150
Releasing and Circulating Overshot
can be dressed with a mill extension
and special flat-bottomed guides (refer
to Mill Guides on page 33) to retrieve
sheared pipe in an economical, simple,
and time-saving manner.
Before installing the overshot on the
drill string, dress it with a mill extension
and a flat-bottomed, long guide. The
tapered milling ribs of the mill extension
are faced with sintered tungsten carbide
on the inner diameter. The overshot is
then lowered into the BOP and over the
end of the drill pipe. Rotation mills down
the flared ends and protruding ears of
the sheared pipe. The end of the long
guide (and the short guide) is faced with
Mill Operation
Top Sub
Top Sub
Top Sub
Top Sub
Type A Packer
Bowl
Bowl
Bowl
Bowl
Spiral
Grapple
Basket
Grapple
Basket
Grapple
Spiral Grapple
Control
Basket Grapple
Control
Basket
Mill Control
Grapple
Packer
(includes Outer
Mill
andControl
Inner Seal)
Packer
(includes Outer
and Inner Seal)
Standard
Cut-lipped Guide
Standard
Cut-lipped Guide
Standard
Cut-lipped Guide
Basket Grapple
with Basket Grapple Control
Basket Grapple
with Mill Control Packer
2
1-3/4
2-5/16
SH
150-231-D
B-8919
2-1/8
1-3/4
2-5/8
SH
150-263-D
C-10199
2-3/8
2
3-1/8
XSH
150-313-E
9305
2-3/8
1-7/8
3-1/2
FS
150-350-A
C-4741
2-3/8
1-7/8
4-1/8
FS
150-414-A
1443
2-1/2
2
3-3/8
SH
150-338-D
C-4623
2-1/2
2
3-5/8
FS
150-363-A
C-5080
A0950
A-8920
A1950
B-8921
B7008
9404
A1000
A-10200
A2000
B-10201
A3000
A-10206
A1001
9311
A2001
9306
A3001
9312
A1002
B-4742
A2002
B-4743
A3002
A-4745
A10025
1445
A20025
1446
A30025
1450
A1003
A-5083
A2003
B-5088
A3003
A-5093
A1004
A-5081
A2004
B-5082
A3004
A-5087
A4950
9407
B3008
9403
A6950
9405
A4000
B-10202
A5000
B-10204
A6000
A-10205
A4001
9309
A5001
9307
A6001
9308
A4002
L-1453
A5002
B-782
A6002
B-783
A40025
1453
A50025
1448
A60025
1449
A4003
B-5089
A5003
B-5091
A6003
A-5092
A4004
B-3395
A5004
B-5085
A6004
A-5086
B5008
9403
B6008
9405
A9950
9407M
A7000
B-10204
A8000
A-10205
A9000
B-10202-R
A7001
9307
A8001
9308
A9001
9309-R
A7002
B-782
A8002
B-783
A9002
L-1453-R
A70025
1448
A80025
1449
A90025
1453-R
A7003
B-5091
A8003
A-5092
A9003
B-5089-R
A7004
B-5085
A8004
A-5086
A9004
B-3395-R
TOP SUB
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Coding
A = FS
Full Strength For all pulling torsional and jarring strain
B = XFS Extra Full Strength For extreme abuse
C = SFS Semi Full Strength Maximum strength for special hole conditions
D = SH
Slim Hole For heavy pulling strains only
E = XSH Extra Slim Hole For pick up jobs only
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
TOP SUB
2-7/8
2-1/2
3-5/8
XSH
150-363-E
9270
3-1/16
2-11/16
3-3/4
SH
150-375-D
37585
3-1/8
2-5/8
3-7/8
SH
150-388-D
C-1835
2-7/8
2-3/8
3-3/4
SH
150-376-D
C-1827
2-7/8
2-3/8
4
FS
150-400-A
C-4736
3-1/16
2-9/16
3-15/16
SH
150-393-D
C-5101
3-1/16
2-9/16
4-3/16
FS
150-419-A
C-5098
A1005
9276
A2005
9271
A3005
9275
A10055
37586
A20055
37587
A30055
37592
A10056
A-1842
A20056
B-1836
A30056
A-1841
A10057
A-1834
A20057
B-1828
A30057
A-1833
A1006
A-4737
A2006
B-4738
A3006
A-4740
A1007
A-5102
A2007
B-5103
A3007
A-3598
A1008
A-5099
A2008
B-5100
A3008
A-4405
A4005
8550
A5005
9272
A6005
9273
A40055
37588
A50055
37590
A60055
37591
A40056
B-1839
A50056
B-1837
A60056
A-1838
A40057
A-1831
A50057
A-1829
A60057
A-1830
A4006
L-809
A5006
M-805
A6006
M-806
A4007
B-3594
A5007
B-3596
A6007
B-3597
A4008
L-7090
A5008
B-4403
A6008
B-4403
A7005
9272
A8005
9273
A9005
8550-R
A70055
37590
A80055
37591
A90055
37588-R
A70056
B-1837
A80056
A-1838
A90056
B-1839-R
A70057
A-1829
A80057
A-1830
A90057
A-1831-R
A7006
M-805
A8006
M-806
A9006
L-809-RS
A7007
B-3596
A8007
B-3597
A9007
B-3594-R
A7008
B-4403
A8008
B-4404
A9008
L-7090-R
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Coding
A = FS
Full Strength For all pulling torsional and jarring strain
B = XFS Extra Full Strength For extreme abuse
C = SFS Semi Full Strength Maximum strength for special hole conditions
D = SH
Slim Hole For heavy pulling strains only
E = XSH Extra Slim Hole For pick up jobs only
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
TOP SUB
3-1/8
2-5/8
4
SH
150-400-D
C-5104
3-1/8
2-5/8
4-1/8
FS
150-413-A
9105
3-1/8
2-5/8
4-1/8
FS
150-412-A
8220
3-1/8
2-5/8
4-1/4
FS
150-425-A
C-4822
3-1/4
2-3/4
4-1/8
SH
150-413-D
C-5115
3-1/4
2-3/4
4-3/8
FS
150-437-A
9630
3-1/4
2-3/4
4-3/8
FS
150-438-A
C-5112
A1009
A-5105
A2009
B-5106
A3009
A-5111
A1010
9106
A2010
9107
A3010
1746
A10105
8221
A20105
8223
A3010
1746
A1011
A-4823
A2011
B-4824
A3011
A-793
A1012
A-5116
A2012
B-5117
A3012
A-5122
A10125
9631
A20125
9632
A30125
1519
A1013
A-5113
A2013
B-5114
A3013
A-3207
A4009
B-5107
A5009
B-5109
A6009
A-5110
A4010
809
A5010
1741
A6010
1747
A4010
809
A5010
1741
A6010
1747
A4011
L-7090
A5011
B-791
A6011
B-792
A4012
B-5118
A5012
B-5120
A6012
A-5121
A40125
1517
A50125
1518
A60125
1520
A4013
L-1517
A5013
B-3205
A6013
B-3206
A7009
B-5109
A8009
B-5110
A9009
B-5107-R
A7010
1741
A8010
1747
A9010
809-R
A7010
1741
A8010
1747
A9010
809-R
A7011
B-791
A8011
B-792
A9011
L-7090-R
A7012
B-5120
A8012
A-5121
A9012
B-5118-R
A70125
1518
A80125
1520
A90125
1517-R
A7013
B-3205
A8013
B-3206
A9013
L-1517-R
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Coding
A = FS
Full Strength For all pulling torsional and jarring strain
B = XFS Extra Full Strength For extreme abuse
C = SFS Semi Full Strength Maximum strength for special hole conditions
D = SH
Slim Hole For heavy pulling strains only
E = XSH Extra Slim Hole For pick up jobs only
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
TOP SUB
3-3/8
2-7/8
3-7/8
XSH
150-388-E
21300
3-3/8
2-7/8
4-1/4
SH
150-425-D
C-5126
3-3/8
3-3/8
2-7/8
2-7/8
4-3/8
4-1/2
FS
FS
150-4375-A 150-450-A
9635
C-5123
3-1/2
2-7/8
4-3/8
SH
150-438-D
C-4619
3-1/2
2-7/8
4-13/16
FS
150-482-A
C-4732
3-1/2
2-7/8
4-1/2
SH
150-451-D
C-3793
A10135
21301
A20135
21302
A30135
21307
A1014
A-5127
A2014
B-5128
A3014
A-4629
A10145
9636
A20145
9637
A30145
4197
A1015
A-5124
A2015
B-5125
A3015
A-3361
A1016
A-4620
A2016
B-4621
A3016
A-4622
A1017
A-4733
A2017
B-4734
A3017
A-4735
A10161
A-3794
A20161
A-3795
A30161
A-3609
A40135
21303
A50135
21305
A60135
21306
A4014
B-4625
A5014
B-4627
A6014
B-4628
A40145
4185
A50145
4195
A60145
4196
A4015
L-6515
A5015
B-3359
A6015
B-3360
A4016
L-7065
A5016
B-3607
A6016
B-3608
A4017
L-168
A5017
M-164
A6017
M-185
A4015
L-6515
A5016
B-3607
A6016
B-3608
A70135
21305
A80135
21306
A90135
21303-R
A7014
B-4627
A8014
B-4628
A9014
B-4625-R
A70145
4195
A80145
4196
A90145
4185-R
A7015
B-3359
A8015
B-3360
A9015
L-6515-R
A7016
B-3607
A8016
B-3608
A9016
L-7065-R
A7017
M-164
A8017
M-185
A9017
L-168-R
A7016
B-3607
A8016
B-3608
A9015
L-6515-R
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Coding
A = FS
Full Strength For all pulling torsional and jarring strain
B = XFS Extra Full Strength For extreme abuse
C = SFS Semi Full Strength Maximum strength for special hole conditions
D = SH
Slim Hole For heavy pulling strains only
E = XSH Extra Slim Hole For pick up jobs only
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
TOP SUB
3-21/32
3-1/8
4-1/2
SH
150-450-D
17201
3-21/32
3-1/8
4-9/16
SH
150-456-D
C-5151
3-21/32
3.220
4-11/16
SFS
150-469-C
9109
3-21/32
3-1/8
5
FS
150-500-A
C-5148
3-3/4
3-7/32
4-5/8
SH
150-463-D
C-5129
3-3/4
3-1/4
4-11/16
SFS
150-468-C
9120
3-13/16
3-5/16
4-7/16
SH
150-444-D
C-9773
A10175
17202
A20175
17203
A30175
17204
A1018
A-5152
A2018
B-5153
A3018
A-4341
A1019
9110
A2019
9111
A3019
6667
A1020
A-5149
A2020
B-5150
A3020
A-4412
A1021
A-5130
A2021
B-5131
A3021
A-5135
A1019
9110
A20215
9121
A30215
9125
A10217
A-9774
A20217
B-9775
A30217
A-9779
A4018
L-6665
A5018
B-4339
A6018
B-4340
A4018
L-6665
A5018
B-4339
A6018
B-4340
A4019
6665
A5019
6662
A6019
6674
A4020
B-3219
A5020
B-4410
A6020
B-4411
A4021
B-5538
A5021
B-5133
A6021
A-5134
A40215
9122
A50215
9123
A60215
9124
A40217
L-6163
A50217
B-9777
A60217
A-9778
A7018
B-4339
A8018
B-4340
A9018
L-6665-R
A7018
B-4339
A8018
B-4340
A9018
L-6665-R
A7019
6662
A8019
6674
A9019
6665-R
A7020
B-4410
A8020
B-4411
A9020
B-3219-R
A7021
B-5133
A8021
A-5134
A9021
B-5538-R
A70215
9123
A80215
9124
A90215
9122-R
A70217
B-9777
A80217
A-9778
A90217
L-6163-R
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Coding
A = FS
Full Strength For all pulling torsional and jarring strain
B = XFS Extra Full Strength For extreme abuse
C = SFS Semi Full Strength Maximum strength for special hole conditions
D = SH
Slim Hole For heavy pulling strains only
E = XSH Extra Slim Hole For pick up jobs only
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
3-3/4
3-1/8
5-1/8
FS
150-513-A
C-4686
3-7/8
3-1/4
5-1/4
FS
150-525-A
9515
3-7/8
3-3/8
4-5/8
SH
150-462-D
C-6230
4
3-1/2
4-7/8
SH
150-488-D
C-5154
4
3-3/8
5-5/16
FS
150-531-A
C-5142
4-1/8
3-5/8
5
SH
150-500-D
C-5428
4-1/8
3-1/2
5-7/16
FS
150-544-A
C-5425
A1022
A-4687
A2022
B-4688
A3022
A-816
A1023
9516
A2023
9517
A3023
876
A10235
A-6231
A20235
B-6232
A30235
A-6236
A1024
A-5155
A2024
B-5156
A3024
A-5161
A1025
A-5143
A2025
B-5144
A3025
A-1507
A1026
A-5429
A2026
B-5430
A3026
B-4899
A1027
A-5426
A2027
B-5427
A3027
B-1999
A4022
A-811
A5022
B-814
A6022
B-815
A4023
856
A5023
859
A6023
875
A40235
A-1707
A50235
B-6234
A60235
A-6235
A4024
B-5157
A5024
B-5159
A6024
B-5160
A4025
B-1508
A5025
B-1505
A6025
A-1506
A4026
B-4895
A5026
B-4897
A6026
B-4898
A4027
L-1867
A5027
B-1997
A6027
A-1998
A7022
B-814
A8022
B-815
A9022
811-R
A7023
859
A8023
875
A9023
856-R
A70235
B-6234
A80235
A-6235
A90235
60947R
A7024
B-5159
A8024
B-5160
A9024
B-5157-R
A7025
B-1505
A8025
A-1506
A9025
A-1508-R
A7026
B-4897
A8026
B-4898
A9026
B-4895-R
A7027
B-1997
A8027
A-1998
A9027
L-1867-R
TOP SUB
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Coding
A = FS
Full Strength For all pulling torsional and jarring strain
B = XFS Extra Full Strength For extreme abuse
C = SFS Semi Full Strength Maximum strength for special hole conditions
D = SH
Slim Hole For heavy pulling strains only
E = XSH Extra Slim Hole For pick up jobs only
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
TOP SUB
4-1/4
3-3/4
5-1/8
SH
150-513-D
C-5162
4-1/4
3-3/4
5-1/8
SH
150-512-D
4716
4-1/4
3-11/16
5-9/16
FS
150-556-A
5896
4-1/4
3-11/16
5-9/16
FS
150-555-A
C-4819
4-1/2
3-7/8
5-3/8
SH
150-538-D
C-5165
4-1/2
3-7/8
5-13/16
FS
150-581-A
C-4814
4-5/8
4-1/8
5-1/2
SH
150-550-D
C-4969
A1028
A-5163
A2028
B-5164
A3028
A-4676
A10285
4718
A20285
4717
A30285
4719
A1029
5897
A2029
5898
A3029
187
A10295
A-4820
A20295
B-4821
A30295
L-187
A1030
A-5166
A2030
B-5167
A3030
B-2491
A1031
A-4815
A2031
B-4816
A3031
B-1989
A10315
A-4970
A20315
B-4971
A30315
M-1138
A40285
B-4672
A50285
B-4674
A60285
A-4675
A40285
4672
A50285
4674
A60285
4675
A4029
169
A5029
165
A6029
186
A4029
169
A5029
165
A6029
186
A4030
B-2487
A5030
B-2489
A6030
B-2490
A4031
B-2199-1
A5031
B-1987
A6031
B-1988
A4032
1140
A5032
1135
A6032
1137
A70285
B-4674
A80285
A-4675
A90285
B-4672-R
A70285
4674
A80285
4675
A90285
4672-R
A7029
165
A8029
186
A9029
169-R
A7029
165
A8029
186
A9029
169-R
A7030
B-2489
A8030
B-2490
A9030
B-2487-R
A7031
B-1987
A8031
B-1988
A9031
B-2199-1R
A7032
1135
A8032
1137
A9032
1140-R
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Coding
A = FS
Full Strength For all pulling torsional and jarring strain
B = XFS Extra Full Strength For extreme abuse
C = SFS Semi Full Strength Maximum strength for special hole conditions
D = SH
Slim Hole For heavy pulling strains only
E = XSH Extra Slim Hole For pick up jobs only
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
4-5/8
4-1/8
5-5/8
FS
Logan Part No.
Bowen No.
TOP SUB
4-5/8
4
5-15/16
FS
4-3/4
4-1/4
5-5/8
SH
4-3/4
4-1/4
5-3/4
FS
4-3/4
4-1/8
6-1/16
FS
4-7/8
4-1/4
5-3/4
SH
4-7/8
4-1/4
6-1/8
FS
A1033
5738
A2033
5735
A3033
192
A1034
A-5169
A2034
B-5170
A3034
B-2203
A1035
8976
A2035
8977
A3035
6121
A1036
A-4830
A2036
B-4831
A3036
B-2366
A1037
A-7097
A2037
B-7098
A3037
A-6391
A10375
908
A20375
905
A30375
1186
A4032
1140
A5032
1135
A6032
1137
A4033
195
A5033
196
A6033
193
A4034
B-2199
A5034
B-2201
A6034
B-2202
A4035
6114
A5035
6112
A6035
6113
A4036
B-2362
A5036
B-2364
A6036
B-2365
A4037
B-6387
A5037
B-6389
A6037
A-6390
A40375
1189
A50375
1182
A60375
1187
A7032
1135
A8032
1137
A9032
1140-R
A7033
196
A8033
193
A9033
195-R
A7034
B-2201
A8034
B-2202
A9034
B-2199-R
A7035
6112
A8035
6113
A9035
6114-R
A7036
B-2364
A8036
B-2365
A9036
B-2362-R
A7037
B-6389
A8037
A-6390
A9037
B-6387-R
A70375
1182
A80375
1187
A90375
1189-R
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Coding
A = FS
Full Strength For all pulling torsional and jarring strain
B = XFS Extra Full Strength For extreme abuse
C = SFS Semi Full Strength Maximum strength for special hole conditions
D = SH
Slim Hole For heavy pulling strains only
E = XSH Extra Slim Hole For pick up jobs only
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
TOP SUB
4-7/8
4-1/4
6-3/16
FS
150-619-A
C-7093
5
4-1/2
5-7/8
SH
150-588-D
C-5171
5
4-3/8
6-1/8
SFS
150-612-C
7787
5
4-1/4
6-5/8
FS
150-663-A
C-4825
5-1/8
4-5/8
5-3/4
SH
150-576-D
C-11823
5-1/4
4-5/8
6-3/8
SH
150-638-D
6655
5-3/8
4-3/4
6-1/2
SH
150-650-D
4773
A1038
A-7094
A2038
B-7095
A3038
A-2459
A1039
A-5172
A2039
B-5173
A3039
B-4371
A10395
7789
A20395
7788
A30395
5946
A1040
B-4826
A2040
B-4827
A3040
L-1074
A10402
A-11824
A20402
B-11825
A30402
A-11830
A10405
6656
A20405
4503
A30405
4504
A10407
4774
A20407
9205
A30407
4775
A4038
B-2455
A5038
B-2457
A6038
B-2458
A4039
L-5950
A5039
B-4369
A6039
B-4370
A40395
5950
A50395
5942
A60395
5944
A4040
L-4505
A5040
M-1071
A6040
M-1072
A40402
B-11826
A50402
B-11828
A60402
A-11829
A40405
4505
A50405
4498
A60405
4499
A40407
9209
A50407
9207
A60407
9208
A7038
B-2457
A8038
B-2458
A9038
B-2455-R
A7039
B-4369
A8039
B-4370
A9039
L-5950-R
A70395
5942
A80395
5944
A90395
5950-R
A7040
M-1071
A8040
M-1072
A9040
M-4505-RS
A70402
B-11828
A80402
A-11829
A90402
11826-R
A70405
4498
A80405
4499
A90405
4505-R
A70407
9207
A80407
9208
A90407
9209-R
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Coding
A = FS
Full Strength For all pulling torsional and jarring strain
B = XFS Extra Full Strength For extreme abuse
C = SFS Semi Full Strength Maximum strength for special hole conditions
D = SH
Slim Hole For heavy pulling strains only
E = XSH Extra Slim Hole For pick up jobs only
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
TOP SUB
5-1/2
4-7/8
6-5/8
SH
150-663-D
8625
5-1/2
4-3/4
7-1/8
FS
150-713-A
C-5176
5-3/4
5-1/8
6-7/8
SH
150-688-D
8978
5-3/4
5
7-3/8
FS
150-738-A
C-4689
6
5-1/4
7-5/8
FS
150-763-A
7572
6-1/8
5-1/2
7-1/4
SH
150-725-D
C-5206
6-1/8
5-3/8
7-3/4
FS
150-775-A
C-5204
A1041
8626
A2041
8617
A3041
8621
A1042
A-5177
A2042
B-2791
A3042
A-761
A1043
8979
A2043
8980
A3043
6701
A1044
A-4690
A2044
B-3522
A3044
L-120
A1045
7573
A2045
7574
A3045
218
A1046
A-5207
A2046
B-5208
A3046
A-5213
A1047
A-5205
A2047
B-4218
A3047
A-2065
A4041
8618
A5041
8619
A6041
8620
A4042
A-756
A5042
B-759
A6042
B-760
A4043
6697
A5043
6699
A6043
6700
A4044
L-110
A5044
M-104
A6044
L-130
A4045
223
A5045
220
A6045
219
A4046
B-5209
A5046
B-5211
A6046
A-5212
A4047
L-1642
A5047
B-2063
A6047
B-2064
A7041
8619
A8041
8620
A9041
L-8618-R
A7042
B-759
A8042
B-760
A9042
A-756-R
A7043
6699
A8043
6700
A9043
6697-R
A7044
M-104
A8044
L-130
A9044
L-110-R
A7045
220
A8045
219
A9045
223-R
A7046
B-5211
A8046
A-5212
A9046
B-5209-R
A7047
B-2063
A8047
B-2064
A9047
L-1642-R
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Coding
A = FS
Full Strength For all pulling torsional and jarring strain
B = XFS Extra Full Strength For extreme abuse
C = SFS Semi Full Strength Maximum strength for special hole conditions
D = SH
Slim Hole For heavy pulling strains only
E = XSH Extra Slim Hole For pick up jobs only
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
TOP SUB
6-1/4
5-5/8
7-3/8
SH
150-738-D
9692
6-1/4
5-9/16
7-5/8
SFS
150-762-C
1873
6-1/4
5-9/16
7-5/8
SFS
150-763-C
8741
6-1/4
5-9/16
7-7/8
FS
150-777-A
7791
6-1/4
5-1/2
7-7/8
FS
150-788-A
C-2108
6-3/8
5-3/4
7-1/2
SH
150-750-D
9009
6-3/8
5-5/8
7-3/4
SFS
150-775-C
9163
A1048
9693
A2048
9694
A3048
9691
A10485
118
A20485
1875
A3049
5525
A1049
8742
A2049
1641
A3049
5525
A10495
7793
A20495
1657
A30495
1493
A1050
B-2106
A2050
B-2109
A3050
A-2075
A1051
9010
A2051
9011
A3051
9007
A1052
9165
A2052
9164
A3052
5506
A4048
9689
A5048
9687
A6048
9688
A4049
1642
A5049
1644
A6049
1645
A4049
1642
A5049
1644
A6049
1645
A40495
1680
A50495
1659
A60495
1660
A4050
L-1680
A5050
B-2073
A6050
A-2074
A4051
9005
A5051
9003
A6051
9004
A4052
5508
A5052
5503
A6052
5504
A7048
9687
A8048
9688
A9048
9689-R
A7049
1644
A8049
1645
A9049
1642-R
A7049
1644
A8049
1645
A9049
1642-R
A70495
1659
A80495
1660
A90495
1680-R
A7050
B-2073
A8050
A-2074
A9050
L-1680-R
A7051
9003
A8051
9004
A9051
9005-R
A7052
5503
A8052
5504
A9052
5508-R
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Coding
A = FS
Full Strength For all pulling torsional and jarring strain
B = XFS Extra Full Strength For extreme abuse
C = SFS Semi Full Strength Maximum strength for special hole conditions
D = SH
Slim Hole For heavy pulling strains only
E = XSH Extra Slim Hole For pick up jobs only
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
TOP SUB
6-1/2
5-7/8
7-5/8
SH
150-763-D
9860
6-1/2
5-3/4
8-1/8
FS
150-813-A
C-5342
6-5/8
6
7-3/4
SH
150-775-D
4785
6-5/8
5-7/8
8-1/4
FS
150-825-A
C-3032
6-3/4
6-1/8
7-7/8
SH
150-788-D
C-5222
6-3/4
6
8-3/8
FS
150-838-A
275
6-7/8
6-1/4
8
SH
150-800-D
N-8995
A1053
9861
A2053
9862
A3053
9867
A1054
A-5343
A2054
B-3711
A3054
A-2376
A1055
9133
A2055
9134
A3055
9139
A1056
A-3033
A2056
B-3034
A3056
A-1818
A1057
A-5223
A2057
B-5224
A3057
A-5229
A1058
276
A2058
277
A3058
205
A10587
L-8996
A20587
M-8997
A30587
L-8989
A4053
9865
A5053
9863
A6053
9864
A4054
2372
A5054
B-2374
A6054
B-2375
A4055
9136
A5055
9137
A6055
9138
A4056
A-1814
A5056
N-84
A6056
M-89
A4057
B-5225
A5057
B-5227
A6057
A-5228
A4058
207
A5058
209
A6058
208
A40587
L-8985
A50587
M-8987
A60587
M-8988
A7053
9863
A8053
9864
A9053
9865-R
A7054
B-2374
A8054
B-2375
A9054
L-6635-R
A7055
9137
A8055
9138
A9055
9136-R
A7056
N-84
A8056
M-89
A9056
A-1814-R
A7057
B-5227
A8057
A-5228
A9057
B-5225-R
A7058
209
A8058
208
A9058
207-R
A70587
M-8987
A80587
M-8988
A90587
L-8985-R
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Coding
A = FS
Full Strength For all pulling torsional and jarring strain
B = XFS Extra Full Strength For extreme abuse
C = SFS Semi Full Strength Maximum strength for special hole conditions
D = SH
Slim Hole For heavy pulling strains only
E = XSH Extra Slim Hole For pick up jobs only
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
7
6-3/8
8-1/8
SH
Logan Part No.
Bowen No.
TOP SUB
7
6-3/8
8-1/8
SH
7
6-1/4
8-1/8
SH
7
6-3/8
8-3/8
SH
7
6-1/4
8-5/8
FS
7-1/8
6-1/2
8-1/4
SH
7-1/4
6-5/8
8-3/8
SH
A1059
9218
A2059
9219
A3059
9226
A10595
A-3033
A20595
B-3264
A30595
A-3269
A1058
276
A20598
17209
A3059
9226
A1060
B-4818
A2060
B-3819
A3060
M-121
A10605
9544
A20605
9571
A30605
4792
A1061
A-5355
A2061
B-5356
A3061
A-5361
A4059
9224
A5059
9222
A6059
9223
A4059
L-9224
A5059
9222
A6059
9223
A40595
L-6310
A50595
B-3267
A60595
B-3268
A4059
9224
A5059
9222
A6059
9223
A4060
L-111
A5060
N-105
A6060
M-131
A40605
9231
A50605
9229
A60605
9230
A4061
B-5357
A5061
B-5359
A6061
B-5360
A7059
9222
A8059
9223
A9059
92240-R
A7059
9222
A8059
9223
A9059
9224-R
A70595
B-3267
A80595
B-3268
A90595
L-6310R
A7059
9222
A8059
9223
A9059
9224-R
A7060
N-105
A8060
M-131
A9060
L-111-R
A70605
9229
A80605
9230
A90605
9231-R
A7061
B-5359
A8061
B-5360
A9061
B-5357-R
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Coding
A = FS
Full Strength For all pulling torsional and jarring strain
B = XFS Extra Full Strength For extreme abuse
C = SFS Semi Full Strength Maximum strength for special hole conditions
D = SH
Slim Hole For heavy pulling strains only
E = XSH Extra Slim Hole For pick up jobs only
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
TOP SUB
7-1/4
6-1/2
8-7/8
FS
150-888-A
C-5352
7-3/8
6-3/4
8-1/2
SH
150-850-D
4793
7-3/8
6-5/8
9
FS
150-900-A
C-5230
7-1/2
6-7/8
8-5/8
SH
150-863-D
C-7101
7-1/2
6-3/4
9-1/8
FS
150-913-A
C-7099
7-5/8
7
8-3/4
SH
150-875-D
4796
7-5/8
6-7/8
9-1/4
FS
150-762-A
C-5241
A1062
A-5353
A2062
M-1026-1
A3062
M-1029
A1063
4794
A2063
9233
A3063
4795
A1064
A-5231
A2064
B-5232
A3064
A-4158
A1065
A-7102
A2065
B-7103
A3065
A-7108
A1066
A-7100
A2066
B-4516
A3066
A-3456
A1067
4797
A2067
9239
A3067
4798
A10675
A-5242
A20675
B-5243
A30675
A-5248
A4062
L-1025
A5062
M-1027
A6062
M-1031
A4063
9237
A5063
9235
A6063
9236
A4064
B-4154
A5064
C-4156
A6064
B-4157
A4065
B-7104
A5065
B-7106
A6065
A-7107
A4066
L-98
A5066
B-3454
A6066
B-3455
A4067
9243
A5067
9241
A6067
9242
A40675
B-5244
A50675
B-5246
A60675
B-5247
A7062
M-1027
A8062
M-1031
A9062
L-1025-R
A7063
9235
A8063
9236
A9063
9237-R
A7064
C-4156
A8064
B-4157
A9064
B-4154-R
A7065
B-7106
A8065
A-7107
A9065
B-7104-R
A7066
B-3454
A8066
B-3455
A9066
M-98-RS
A7067
9241
A8067
9242
A9067
9243-R
A70675
B-5246
A80675
B-5247
A90675
B-5244-R
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Coding
A = FS
Full Strength For all pulling torsional and jarring strain
B = XFS Extra Full Strength For extreme abuse
C = SFS Semi Full Strength Maximum strength for special hole conditions
D = SH
Slim Hole For heavy pulling strains only
E = XSH Extra Slim Hole For pick up jobs only
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
TOP SUB
7-3/4
7-1/8
8-7/8
SH
150-888-D
9850
7-3/4
7
8-7/8
SH
150-889-D
C-5257
7-3/4
7
9-3/8
FS
150-937-A
1665
7-3/4
7
9-3/8
FS
150-938-A
C-1500
8
7-3/8
9-1/8
SH
150-913-D
C-5265
8
7-1/4
9-5/8
FS
150-963-A
264
8-3/8
7-3/4
9-1/2
SH
150-950-D
4834
A1068
9851
A2068
9852
A3068
9857
A1069
A-5258
A2069
B-5259
A3069
A-5264
A10695
1666
A20695
1283
A30695
88
A1070
B-1502
A2070
B-1501
A3070
M-88
A1071
A-5266
A2071
B-5267
A3071
A-5272
A1072
265
A2072
266
A3072
240
A1073
9063
A2073
9062
A3073
9059
A4068
9855
A5068
9853
A6068
9854
A4069
B-5260
A5069
B-5262
A6069
A-5263
A40695
98 & L-98
A50695
85 & N-85
A60695
100 & M-100
A40695
98 & L-98
A5070
N-85
A60695
100 & M-100
A4071
B-5268
A5071
B-5270
A6071
B-5271
A4072
235
A5072
238
A6072
239
A4073
9055
A5073
9057
A6073
9058
A7068
9853
A8068
9854
A9068
9855-R
A7069
B-5262
A8069
A-5263
A9069
B-5260-R
A70695
85 & N-85
A80695
100 & M-100
A90695
98-R
& L-98-R
A7070
N-85
A80695
100 & M-100
A90695
98-R
& L-98-R
A7071
B-5270
A8071
B-5271
A9071
B-5268-R
A7072
238
A8072
239
A9072
235-R
A7073
9057
A8073
9058
A9073
9055-R
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Coding
A = FS
Full Strength For all pulling torsional and jarring strain
B = XFS Extra Full Strength For extreme abuse
C = SFS Semi Full Strength Maximum strength for special hole conditions
D = SH
Slim Hole For heavy pulling strains only
E = XSH Extra Slim Hole For pick up jobs only
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
TOP SUB
8-3/8
7-5/8
10-1/16
FS
150-1006-A
C-1230
8-1/2
7-7/8
9-5/8
SH
150-963-D
C-5284
8-1/2
7-3/4
10-1/8
FS
150-1013-A
8960
8-5/8
7-7/8
10-1/4
SH
150-1025-D
C-5297
8-7/8
8-1/8
10-1/2
FS
150-1050-A
C-5305
9
8-1/4
10-5/8
FS
150-1063-A
C-5321
9-5/8
8-7/8
11-1/4
FS
150-1125-A
C-12822
A1074
B-1235
A2074
B-1231
A3074
B-1236
A1075
A-5285
A2075
B-5286
A3075
A-5291
A1076
8961
A2076
8962
A3076
8959
A1077
A-5298
A2077
B-5299
A3077
A-5304
A1078
A-5306
A2078
B-5307
A3078
A-5312
A1079
A-5322
A2079
B-5323
A3079
A-5328
A1080
A-12823
A2080
B-12824
A3080
A-12829
A4074
L-1060
A5074
C-1232
A6074
B-1233
A4075
B-5287
A5075
B-5289
A6075
A-5290
A4076
8956
A5076
8957
A6076
8958
A4077
B-5300
A5077
B-5302
A6077
B-5303
A4078
B-5308
A5078
B-5310
A6078
B-5311
A4079
B-5324
A5079
B-5326
A6079
B-5327
A4080
B-12825
A5080
B-12827
A6080
B-12828
A7074
C-1232
A8074
B-1233
A9074
L-1060-R
A7075
B-5289
A8075
B-5290
A9075
B-5287-R
A7076
8957
A8076
8958
A9076
8956-R
A7077
B-5302
A8077
B-5303
A9077
B-5300-R
A7078
B-5310
A8078
B-5311
A9078
B-5308-R
A7079
B-5326
A8079
B-5327
A9079
B-5324-R
A7080
B-12827
A8080
B-12828
A9080
B-12825-R
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Coding
A = FS
Full Strength For all pulling torsional and jarring strain
B = XFS Extra Full Strength For extreme abuse
C = SFS Semi Full Strength Maximum strength for special hole conditions
D = SH
Slim Hole For heavy pulling strains only
E = XSH Extra Slim Hole For pick up jobs only
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
TOP SUB
9-3/4
9
11-3/8
FS
150-1138-A
26255
10-1/8
9-3/8
11-3/4
FS
150-1175-A
C-5329
11-1/4
10-1/2
12-3/4
FS
150-1275-A
15800
12
11-1/4
13-3/4
150-1375
33006
14
13-1/4
16
150-1600
68028
14-3/4
14
16-3/4
150-1675
64553
16-3/4
16
20-1/4
150-2075
31653
A1081
26256
A2081
26257
A3081
26261
A1082
5330
A2082
5331
A3082
5336
A1083
15801
A2083
15802
A3083
15806
A1084
33007
A2084
33008
A3084
33012
A1085
68029
A2085
68030
A3085
68035
A1086
64554
A2086
64555
A3086
64560
A1087
31654
A2087
31655
A3087
31660
A4081
26260
A5081
26258
A6081
26259
A4082
B-5332
A5082
5334
A6082
5335
A4083
15805
A5083
15803
A6083
15804
A4084
33011
A5084
33009
A6084
33010
A4085
68031
A5085
68033
A6085
68034
A4086
64556
A5086
64558
A6086
64559
A4087
31656
A5087
31658
A6087
31659
A7081
26258
A8081
26259
A9081
26260-R
A7082
5334
A8082
5335
A9082
5332-R
A7083
15803
A8083
15804
A9083
15805-R
A7084
33009
A8084
33010
A9084
33011-R
A7085
68033
A8085
68034
A9085
68031-R
A7086
64558
A8086
64559
A9086
64556-R
A7087
31658
A8087
31659
A9087
31656-R
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Coding
A = FS
Full Strength For all pulling torsional and jarring strain
B = XFS Extra Full Strength For extreme abuse
C = SFS Semi Full Strength Maximum strength for special hole conditions
D = SH
Slim Hole For heavy pulling strains only
E = XSH Extra Slim Hole For pick up jobs only
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
EXTENSION SUBS
Logan Series 150 Extension Sub is used when the upper
portion of the fish is damaged or cannot be engaged. This
accessory will permit
EXTENSION
SUBSthe overshot to be lowered far enough
over the fish to ensure secure engagement and pack-off. An
Logan Series 150 Extension Sub is used when the upper
extension sub is assembled between the top sub and the
portion of the fish is damaged or cannot be engaged. This
bowl of the overshot. They are available in lengths from 24
accessory will permit the overshot to be lowered far enough
to 60 inches. Special lengths are available upon request.
over the fish to ensure secure engagement and pack-off. An
Logan Series
Extensionbetween
Subs with
canand
alsothe
be
extension
sub 150
is assembled
thestops
top sub
furnished
request.
bowl
of theupon
overshot.
They are available in lengths from 24
to 60 inches. Special lengths are available upon request.
When ordering, please specify:
(1) O.D.
and length
Logan
Series
150 Extension Subs with stops can also be
(2)
Top
or
bottom
extension
furnished upon
request.
(3) For Upper Extension, advise part number for Top Sub
When ordering, please specify:
or Assembly
(1) O.D. and length
(4) For Lower Extension, advise part number for Guide
(2) Top or bottom extension
or Assembly
(3) For Upper Extension, advise part number for Top Sub
or Assembly
(4) For Lower Extension, advise part number for Guide
or Assembly
LENGTHS
36" Long
42" Long
Weight
Weight
Weight
LENGTHS
Weight
Long
Long
36"
42"
Weight
75
86
Weight
Weight
84
97
Weight
Weight
94
108
Weight
Weight
103
119
Weight
Weight
128
147
Weight
75
86
Weight
146
168
Weight
84
97
Weight
174
200
Weight
94
108
Weight
181
209
Weight
103
119
Weight
200
230
Weight
128
147
Weight
214
246
Weight
146
168
Weight
246
280
Weight
174
200
Weight
238
274
Weight
181
209
Weight
252
290
Weight
200
230
Weight
264
304
Weight
214
246
Weight
298
343
Weight
246
280
Weight
314
362
Weight
238
274
Weight
330
380
Weight
252
290
Weight
355
410
Weight
264
304
Over 11 to 11-1/2
Weight 207
253
298
343
Logan
Oil Tools
change218
or discontinue
Over
11-1/2
to 12 reserves the right to
Weight
266designs without
314 notice. 362
Over 12 to 12-1/2
Weight 230
280
330
380
LEGAL
NOTICE
Over
12-1/2
to 13
Weight 245
300
355
410
EXTENSION SUB OD (INCHES)
2 to 2-1/2
Over 2-1/2 to 3
Over 3 to 3-1/2
Over 3-1/2 toSUB
4
EXTENSION
OD (INCHES)
4 to 4-1/2
2Over
to 2-1/2
Over 2-1/2
4-1/2 to
to 35
Over
Over 35 to
to 3-1/2
5-1/2
Over
Over 3-1/2
5-1/2 to
to 46
Over
Over 46 to
to 4-1/2
6 1/2
Over
Over 4-1/2
6-1/2 to
to 57
Over
Over 57 to
to 5-1/2
7-1/2
Over
Over 5-1/2
7-1/2 to
to 68
Over
Over 68 to
to 68-1/2
Over
1/2
Over 6-1/2
8-1/2 to
to 79
Over
Over 79 to
to 7-1/2
9-1/2
Over
Over 7-1/2
9-1/2 to
to 810
Over
Over 810toto8-1/2
10-1/2
Over
Over 8-1/2
10-1/2toto9 11
Over
Over 911toto9-1/2
11-1/2
Over
Over 9-1/2
11-1/2toto1012
Over
Over 10
12 to
to 10-1/2
12-1/2
Over
Over 10-1/2
12-1/2 to
to 11
13
Over
24" Long
Long
24"
53
59
66
73
90
53
102
59
122
66
127
73
140
90
150
102
178
122
166
127
176
140
184
150
207
178
218
166
230
176
245
184
30" Long
Long
30"
64
72
80
88
109
64
124
72
148
80
154
88
170
109
182
124
212
148
202
154
214
170
224
182
253
212
266
202
280
214
300
224
48" Long
Long
48"
97
109
122
134
166
97
190
109
226
122
236
134
260
166
278
190
314
226
310
236
328
260
344
278
388
314
410
310
430
328
465
344
54" Long
Long
54"
108
122
136
150
185
108
212
122
252
136
263
150
290
185
310
212
348
252
346
263
366
290
384
310
433
348
458
346
480
366
520
384
60" Long
Long
60"
119
135
150
166
204
119
234
135
276
150
290
166
320
204
342
234
382
276
382
290
404
320
424
342
478
382
516
382
530
404
575
424
388
410
430
465
433
458
480
520
478
516
530
575
Logan
Tools reservestools
the right
to change
or discontinue
designs
identifyOil
interchangeable
and parts.
Reference
to such tools
and without notice.
parts does not imply that Logan Oil Tools is a licensee or is in any
30 affiliated
Logan Series
150 Releasing
& Circulating
Overshots
way
with National
Oilwell Varco.
Logan Oil Tools
does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
OVERSIZED GUIDES
The Logan Series 150 Oversized Guide properly guides
the fish into the over-shot when the hole size is considerably
larger than the diameter of the fish and the overshot may
pass alongside the fish without engaging it. Installation of
an oversized guide instead of a standard guide will ensure
alignment of the fish with the overshot.
When ordering, please specify:
(1) Part number of Overshot Assembly, Standard Guide,
or Bowl
(2) O.D. of Guide
GUIDE OD (INCHES)
to 4-1/2 .....................
Over 4-1/2 to 5............................
Over 5
to 5-1/2 ....................
Over 5-1/2 to 6............................
Over 6
to 6-1/2 ....................
Over 6-1/2 to 7............................
Over 7
to 7-1/2 ....................
Over 7-1/2 to 8 ...........................
Over 8
to 8-1/2 ....................
Over 8-1/2 to 9 ...........................
Over 9
to 9-1/2 ....................
Over 9-1/2 to 10 .........................
Over 10
to 10-1/2 ...................
Over 10-1/2 to 11 .........................
Over 11
to 11-1/2 ...................
Over 11-1/2 to 12 .........................
Over 12
to 12-1/2 ..................
Over 12-1/2 to 13 .........................
WEIGHT
23
27
30
34
49
65
75
85
87
90
110
131
137
143
159
175
183
GUIDE OD (INCHES)
Over 13
to 13-1/2 OD ............
Over 13-1/2 to 14 OD....................
Over 14
to 14-1/2 OD .............
Over 14-1/2 to 15 OD....................
Over 15
to 15-1/2 OD .............
Over 15-1/2 to 16 OD ...................
Over 16
to 16-1/2 OD .............
Over 16-1/2 to 17 OD ...................
Over 17
to 17-1/2 OD .............
Over 17-1/2 to 18 OD ...................
Over 18
to 18-1/2 OD .............
Over 18-1/2 to 19 OD ...................
Over 19
to 19-1/2 OD .............
Over 19-1/2 to 20 OD ...................
Over 20
to 20-1/2 OD .............
Over 20-1/2 to 21 OD ...................
Over 21
to 22 OD ...................
Over 22
to 24 OD ...................
WEIGHT
190
197
205
223
242
250
257
267
278
300
321
327
334
344
353
362
Logan Oil Tools reserves the right to change or discontinue designs without notice.
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
Logan Series 150 Releasing & Circulating Overshots 31
Page 32 Series 70 and 150 Overshots Manual A120
WALLHOOK GUIDES
When it is impossible to engage the top
of a fish that is positioned in a washed
out section of the wellbore using a conventional overshot guide, a Logan Series 150 Wallhook Guide can be used to
capture the neck of a fish, center it, and
properly guide it into the bowl.
OD (INCHES)
Over 5 to 5-1/2
Over 5-1/2 to 6
Over 6 to 6-1/2
Over 6-1/2 to 7
Over 7 to 7-1/2
Over 7-1/2 to 8
Over 8 to 8-1/2
Over 8-1/2 to 9
Over 9 to 9-1/2
Over 9-1/2 to 10
Over 10 to 10-1/2
Over 10-1/2 to 11
Over 11 to 11-1/2
Over 11-1/2 to 12
Over 12 to 12-1/2
Over 12-1/2 to 13
Over 13 to 13-1/2
Over 13-1/2 to 14
Over 14 to 14-1/2
Over 14-1/2 to 15
Over 15 to 15-1/2
Over 15-1/2 to 16
Over 16 to 16-1/2
Over 16-1/2 to 17
Over 17 to 17-1/2
Over 17-1/2 to 18
WEIGHTS:
30" Long
66
73
80
86
93
100
106
113
36" Long
94
102
110
117
126
135
145
155
166
177
189
201
214
227
42" Long
110
117
126
134
144
155
166
177
191
204
244
285
299
312
327
343
360
377
391
404
419
433
448
462
479
496
48" Long
116
127
138
148
159
170
188
198
213
228
273
318
333
348
366
383
402
421
436
451
467
483
500
516
535
554
Logan Oil Tools reserves the right to change or discontinue designs without notice.
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to identify interchangeable
tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a
licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or
offer to sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
MILL GUIDES
Logan Series 150 Overshot Mill Guides
are designed to remove badly burred,
flared, or jagged metal from the top of
the fish. Mill Guides are used in place
of the standard or oversized guide to
trim the fish so it can enter the overshot.
Logan Series 150 Overshot Mill Guides
are available as a Type A, Type B, or
Type C. Order by using the Standard
Guide part number and the fish size.
Type A
Machine cut carburized teeth mill burrs
off tool joints and drill collars.
Type B
Fluted design with tapered end teeth
and straight inside teeth mills over pipe,
upset sections, tool joints caught by the
overshot, or when the top of the fish is
unusually jagged.
Type C
Type B
Type A
Type C
Tungten carburized tapered teeth and
a straight I.D. mills over pipe, upset
sections, and tool joints caught by the
overshot. Performs the same service
on undersize tool joints. Also used when
the top of the fish is unusually jagged
or flared.
TYPE A Machine cut carburized teeth to mill burrs off tool joints and drill collars
GUIDE O.D. NOT OVER (inches)
3-1/2
4
4-1/2
Approximate Length of Guide (inches)
8
8
8
5
8
5-1/2
8
6
12
6-1/2
1
7
12
7-1/2
12
8-1/2
16
9
16
9-1/2
16
10
16
10-1/2
16
11
16
8
12
TYPE B Fluted with end teeth tapered and straight inside teeth to mill over pipe, upset section, or tool joint that the overshot catches
GUIDE O.D. NOT OVER (inches)
4-1/4
5-1/2
6
7
7-1/2
8
8-1/2
Approximate Length of Guide (inches)
8
8
12
12
12
12
16
GUIDE O.D. NOT OVER (inches)
Approximate Length of Guide (inches)
9
16
9-1/2
16
9-3/4
16
TYPE C Tungsten carbide tapered and straight ID to mill over pipe, upset section, or tool joint that the overshot catches
GUIDE O.D. NOT OVER (inches)
3-1/2
4
4-1/2
5
5-1/2
6
Approximate Length of Guide (inches)
8
8
8
8
8
12
6-1/2
12
7
12
7-1/2
12
8
12
10
16
10-1/2
16
11
16
11-3/4
16
8-1/2
16
9
16
9-1/2
16
Logan Oil Tools reserves the right to change or discontinue designs without notice.
3/4
L13591
7/8
L66814
1
L12470
1-1/8
L12471
1-1/4
L12472
1-5/16
L14187
Inner Seal
1-1/2
L12281
1-5/81.660
L11568
1-3/4
L12177
1-3/4
L12177SH
1-7/8
L10803
1.900
2
L218114-1.900 L10804
Inner Seal
2-1/16
L218114-66
2-1/8
L10805
2-1/4
L10806
2-5/16
L218114-74
2-3/8
L10807
2-1/2
L10808
2-5/8
L10809
Inner Seal
2.702
L10994
2-3/4
L10810
2-13/16
L218114-90
2-7/8
L10811
2-7/8
L10811-100
2-7/8
L10811SH
2.900
L218114-2.900
Inner Seal
3
L10812
3-1/16
L10098
3-1/8
L10813
3-3/16
L218114-102
3.220
3-1/4
L218114-3.220 L10814
Inner Seal
3-5/16
3-3/8
L218114-106 L10815
Inner Seal
3-3/4
L10819SH
3-13/16
3-7/8
L218114-122 L10820
Inner Seal
4-1/8
L10822SH
4-1/4
L10823
Inner Seal
4-3/4
L10827
4-7/8
L10828
3-7/16
3-1/2
L218114-110 L10816
1.315
L12280
3-1/4
L10814S
3-5/8
L10817
3-21/32
3-3/4
L218114-117 L10819
3-15/16
L218114-126
4
L10821
4-1/16
4-1/8
L218114-130 L10822
4-1/4
L10823SH
4-3/8
L10824
4-1/2
L10825
4-5/8
L10826
4-5/8
L10826SH
5
L10829
5-1/8
L10830
5-1/4
L10831
5-3/8
L10832
5-1/2
L10833
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Note: L10811-100 (2-7/8 catch) inner seal is HNBR material.
When ordering, please specify:
(1) Size of fish
(2) Inner Seal number
Recommended Spare Parts:
(1) 3 Inner Seals
5-5/8
L10834
5-3/4
L10835
5-7/8
L10836
6
L10837
6-1/8
L10838
6-1/4
L10839
6-3/8
L10840
Inner Seal
6-1/2
L10841
6-5/8
L10842
6-3/4
L10843
6-7/8
L10844
7
L10845
7-1/8
L10846
7-1/4
L10847
Inner Seal
7 3/8
L10848
7-1/2
L10849
7-5/8
L10850
7-3/4
L10851
7-7/8
L10852
8
L10853
8-1/8
L10854
Inner Seal
8 1/4
L10855
8-3/8
L10856
8-1/2
L10857
8-5/8
L10858
8-3/4
L10859
8-7/8
L10860
9
L10861
Inner Seal
9-1/8
L10862
9-1/4
L10863
9-3/8
L10864
9-1/2
L12099
9-5/8
L12100
9-3/4
L12101
10
L12103
Inner Seal
10-1/2
11-1/4
L218114-336 L63841
12
L10885
12-3/4
L81497
Inner Seal
1-1/4
1-13/16
L13366
1-1/2
1.900
L13317
2-1/16
2.330
L13285
2-3/8
2-19/32
L11690
2-3/8
2-21/32
L11690
2-7/8
3-3/32
L11691
2-7/8
3-7/32
L11692
Inner Seal
3-1/2
3-3/4
L11693
3-1/2
3-13/16
L11693
3-1/2
3-15/16
L11694
4-1/2
5
L11695
4-1/2
5-1/8
L11696
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Note: L10811-100 (2-7/8 catch) inner seal is HNBR material.
When ordering, please specify:
(1) Size of fish
(2) Inner Seal number
Recommended Spare Parts:
(1) 3 Inner Seals
A9950
9407M
568-032
A9000
B-10202-R
568-226
A9001
9309-R
568-228
A9002
L-1453-R
568-228
A90025
1453-R
568-228
A9003
B-5089-R
568-229
A9004
B-3395-R
568-230
PACKER
A9005
8550-R
568-233
A90055
37588-R
568-234
A90056
B-1839-R
568-235
A90057
A-1831-R
568-233
A9006
L-809-RS
568-233
A9007
B-3594-R
568-234
A9009
B-5107-R
568-234
PACKER
A9010
809-R
568-234
A9011
L-7090-R
568-235
A9012
B-5118-R
568-235
A90125
1517-R
568-236
A9013
L-1517-R
568-236
A90135
21303-R
568-236
A9014
B-4625-R
568-237
PACKER
A90145
4185-R
568-237
A9015
L-6515-R
568-237
A9016
L-7065-R
568-238
A90165
1253-R
568-239
A9017
L-168-R
568-239
A9018
L-6665-R
568-239
A9019
6665-R
568-239
PACKER
A9020
B-3219-R
568-239
A9021
B-5538-R
568-240
A90215
9122-R
568-239
A90217
L-6163-R
568-238
A9022
811-R
568-240
A9023
856-R
568-241
A90235
60947R
568-241
PACKER
A9024
B-5157-R
568-242
A9025
A-1508-R
568-243
A9026
B-4895-R
568-242
A9027
L-1867-R
568-243
A90285
B-4672-R
568-244
A9029
169-R
568-244
A9030
B-2487-R
568-246
PACKER
A9031
B-2199-1R
568-248
A9032
1140-R
568-247
A9033
195-R
568-349
A9034
B-2199-R
568-248
A9035
6114-R
568-247
A9036
B-2362-R
568-248
A9037
B-6387-R
568-249
PACKER
A90375
1189-R
568-250
A9038
B-2455-R
568-249
A9039
L-5950-R
568-250
A90395
5950-R
568-250
A9040
M-4505-RS
568-252
A90402
11826-R
568-251
A90405
4505-R
568-252
Logan Oil Tools reserves the right to change or discontinue designs without notice.
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
A90407
9209-R
568-252
A9041
L-8618-R
568-253
A9042
A-756-R
568-254
A9043
6697-R
568-255
A9044
L-110-R
568-359
A9045
223-R
568-437
A9046
B-5209-R
568-259
PACKER
A9047
L-1642-R
568-259
A9048
9689-R
568-258
A9049
1642-R
568-259
A90495
1680-R
568-438
A9050
L-1680-R
568-438
A9051
9005-R
568-259
A9052
5508-R
568-260
PACKER
A9053
9865-R
568-259
A9054
L-6635-R
568-439
A9055
9136-R
568-260
A90555
1634-R
568-260
A9056
A-1814-R
568-260
A9057
B-5225-R
568-261
A9058
207-R
568-261
PACKER
A90587
L-8985-R
568-261
A9059
9224-R
568-261
A90595
L-6310-R
568-262
A9060
L-111-R
568-441
A90605
9231-R
568-262
A9061
B-5357-R
568-263
A9062
L-1025-R
568-263
PACKER
A9063
9237-R
568-263
A9064
B-4154-R
568-263
A9065
B-7104-R
568-264
A9066
M-98-RS
568-264
A9067
9243-R
568-263
A90675
B-5244-R
568-264
A9068
9855-R
568-264
PACKER
A9069
B-5260-R
568-265
A90695
98-R
568-265
A9070
L-98-R
568-265
A9071
B-5268-R
568-266
A9072
235-R
568-445
A9073
9055-R
568-267
A9074
L-1060-R
568-268
PACKER
A9075
B-5287-R
568-266
A9076
8956-R
568-268
A9077
B-5300-R
568-269
A9078
B-5308-R
568-270
A9079
B-5324-R
568-269
A9080
B-12825-R
568-271
A9081
26260-R
568-273
PACKER
A9082
5332-R
568-274
A9083
15805-R
568-451
A9084
33011-R
568-453
A9085
68031-R
568-279
A9086
64556-R
568-458
A9087
31656-R
568-463
Logan Oil Tools reserves the right to change or discontinue designs without notice.
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
A9950E
9407E
568-032
A9000E
B-10202-E
568-226
A9001E
9309-E
568-228
A9002E
L-1453-E
568-228
A90025E
1453-E
568-228
A9003E
B-5089-E
568-229
A9004E
B-3395-E
568-230
PACKER
A9005E
8550-E
568-233
A90055E
37588-E
568-234
A90056E
B-1839-E
568-235
A90057E
A-1831-E
568-233
A9006E
L-809-ES
568-233
A9007E
B-3594-E
568-234
A9009E
B-5107-E
568-234
PACKER
A9010E
809-E
568-234
A9011E
L-7090-E
568-235
A9012E
B-5118-E
568-235
A90125E
1517-E
568-236
A9013E
L-1517-E
568-236
A90135E
21303-E
568-236
A9014E
B-4625-E
568-237
PACKER
A90145E
4185-E
568-237
A9015E
L-6515-E
568-237
A9016E
L-7065-E
568-238
A90165E
1253-E
568-239
A9017E
L-168-E
568-239
A9018E
L-6665-E
568-239
A9019E
6665-E
568-239
PACKER
A9020E
B-3219-R
568-239
A9021E
B-5538-R
568-240
A90215E
9122-R
568-239
A90217E
L-6163-R
568-238
A9022E
811-R
568-240
A9023E
856-R
568-241
A90235E
60947R
568-241
PACKER
A9024E
B-5157-E
568-242
A9025E
A-1508-E
568-243
A9026E
B-4895-E
568-242
A9027E
L-1867-E
568-243
A90285E
B-4672-E
568-244
A9029E
169-E
568-244
A9030E
B-2487-E
568-246
PACKER
A9031E
B-2199-1E
568-248
A9032E
1140-E
568-247
A9033E
195-E
568-349
A9034E
B-2199-E
568-248
A9035E
6114-E
568-247
A9036E
B-2362-E
568-248
A9037E
B-6387-E
568-249
PACKER
A90375E
1189-E
568-250
A9038E
B-2455-E
568-249
A9039E
L-5950-E
568-250
A90395E
5950-E
568-250
A9040E
M-4505-ES
568-252
A90402E
11826-E
568-251
A90405E
4505-E
568-252
Logan Oil Tools reserves the right to change or discontinue designs without notice.
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
A90407E
9209-E
568-252
A9041E
L-8618-E
568-253
A9042E
A-756-E
568-254
A9043E
6697-E
568-255
A9044E
L-110-E
568-359
A9045E
223-E
568-437
A9046E
B-5209-E
568-259
PACKER
A9047E
L-1642-E
568-259
A9048E
9689-E
568-258
A9049E
1642-E
568-259
A90495E
1680-E
568-438
A9050E
L-1680-E
568-438
A9051E
9005-E
568-259
A9052E
5508-E
568-260
PACKER
A9053E
9865-E
568-259
A9054E
L-6635-E
568-439
A9055E
9136-E
568-260
A90555E
1634-E
568-260
A9056E
A-1814-E
568-260
A9057E
B-5225-E
568-261
A9058E
207-E
568-261
PACKER
A90587E
L-8985-E
568-261
A9059E
9224-E
568-261
A90595E
L-6310-E
568-262
A9060E
L-111-E
568-441
A90605E
9231-E
568-262
A9061E
B-5357-E
568-263
A9062E
L-1025-E
568-263
PACKER
A9063E
9237-E
568-263
A9064E
B-4154-E
568-263
A9065E
B-7104-E
568-264
A9066E
M-98-ES
568-264
A9067E
9243-E
568-263
A90675E
B-5244-E
568-264
A9068E
9855-E
568-264
PACKER
A9069E
B-5260-E
568-265
A90695E
98-E
568-265
A9070E
L-98-E
568-265
A9071E
B-5268-E
568-266
A9072E
235-E
568-445
A9073E
9055-E
568-267
A9074E
L-1060-E
568-268
PACKER
A9075E
B-5287-E
568-266
A9076E
8956-E
568-268
A9077E
B-5300-E
568-269
A9078E
B-5308-E
568-270
A9079E
B-5324-E
568-269
A9080E
B-12825-E
568-271
A9081E
26260-E
568-273
PACKER
A9082E
5332-E
568-274
A9083E
15805-E
568-451
A9084E
33011-E
568-453
A9085E
68031-E
568-457
A9086E
64556-E
568-458
A9087E
31656-E
568-463
Logan Oil Tools reserves the right to change or discontinue designs without notice.
When ordering, please specify:
(1) Specify catch size
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to
identify interchangeable tools and parts. Reference to such tools and
parts does not imply that Logan Oil Tools is a licensee or is in any
way affiliated with National Oilwell Varco. Logan Oil Tools does not
sell, or offer to sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
Retainer Ring
Inner Seal
Mill Control
HIGH PRESSURE
PACK-OFF ASSEMBLIES
HIGH PRESSURE
The Logan Series 150 High Pressure
PACK-OFF ASSEMBLIES
Pack-off Assembly is for use in areas
The
Series
150 High
with Logan
extreme
pressure.
TheyPressure
are availPack-off
Assembly
is
for
areas
able in 5,000 and 10,000use
psi.inSpecial
with
extreme
pressure.
They
are
availpressure pack-offs are available upon
able
in
5,000
and
10,000
psi.
Special
request. The assemblies listed below
pressure
pack-offs
arethe
available
are installed
between
top subupon
and
request.
The
assemblies
listed
below
bowl of the overshot. High Pressure
are
installed
betweenfor
theuse
topbetween
sub and
Pack-off
Assemblies
bowl
of
the
overshot.
High
Pressure
the bowl and guide of the overshot, and
Pack-off
Assemblies
for are
useavailable
between
for overshots
not listed,
the
bowl
and
guide
of
the
overshot,
and
upon request.
for overshots not listed, are available
Special
Notes:
upon request.
(1) High Pressure Pack-off Assemblies
Special
Notes:
are used
between the top sub and
(1) bowl.
High Pressure Pack-off Assemblies
are used between the top sub and
(2) High Pressure Pack-off Assemblies
bowl.
for use between the bowl and guide
(2) are
Highavailable
Pressureupon
Pack-off
Assemblies
request.
for use between the bowl and guide
(3) High Pressure Pack-off Assemblies
are available upon request.
for overshots not listed are available
(3) upon
High Pressure
request. Pack-off Assemblies
for overshots not listed are available
(4) Bi-Directional High Pressure Packupon request.
off Assemblies are available upon
(4) request.
Bi-Directional
Pack(sealsHigh
bothPressure
internal and
off
Assemblies
are
available
upon
external pressure)
request. (seals both internal and
external pressure)
Standard
Top Sub
Standard
Top Sub
Retainer Ring
Retainer
Ring
Removable
Inner Seal
Removable
Inner Seal
Outer Seal
Packer Body
Guide Ring
Outer Seal
150-413-A
9105
150-413-A
800-249
9105
HPP1010
800-249
HPP4010
HPP1010
GR1010
HPP4010
SR1010
GR1010
SR1010
Guide Ring
High Pressure
Pack-off Bushing
High Pressure
Pack-off Bushing
150-413-D
C5115
150-413-D
800-252
C5115
HPP1012
800-252
HPP4012
HPP1012
GR1012
HPP4012
SR1012
GR1012
SR1012
150-438-A
C5112
150-438-A
800-254
C5112
HPP1013
800-254
HPP4013
HPP1013
GR1013
HPP4013
SR1013
GR1013
SR1013
150-425-D
C5126
150-425-D
800-256
C5126
HPP1014
800-256
HPP4014
150-4375-A
9635
150-4375-A
800-257
9635
HPP10145
800-257
HPP40145
150-575-A
8975
150-575-A
800-284
8975
HPP1035
800-284
HPP4035
150-813-D
9217
150-813-D
800-316
9217
HPP1059
800-316
HPP4059
HPP1014
GR1014
HPP4014
SR1014
GR1014
SR1014
HPP10145
GR10145
HPP40145
SR10145
GR10145
SR10145
150-450-A
C5123
150-450-A
800-258
C5123
HPP1015
800-258
HPP4015
HPP1015
GR1015
HPP4015
SR1015
GR1015
SR1015
150-438-D
C4619
150-438-D
800-259
C4619
HPP1016
800-259
HPP4016
HPP1016
GR1016
HPP4016
SR1016
GR1016
SR1016
HPP1035
HPP1059
GR1035
GR1059
HPP4035
HPP4059
SR1035
SR1059
GR1035
GR1059
SR1035 When
SR1059
ordering, please specify:
(1) Overshot assembly to be used with
* Includes O-ring, Inner Seal, and Retainer Ring
Logan Oil Tools reserves the right to change or discontinue designs without notice.
When
ordering,
(2)
O.D.
of tubingplease
or pipespecify:
size to pack-off
** Optional Spacer Ring for Bi-Directional Pack-off
(1) Overshot assembly to be used with
* Includes O-ring, Inner Seal, and Retainer
Ring
(2) O.D.
of and
tubing
or pipe
size to pack-off
LEGAL NOTICE All references to Bowen part numbers in this literature are used to identify interchangeable
tools
parts.
Reference
to such tools
** Optional Spacer Ring for Bi-Directional Pack-off
and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to
Logan Series 150 Releasing & Circulating Overshots 41
sell, National Oilwell Varco (Bowen) products. Bowen is a registered trademark of National Oilwell Varco.
Logan Series 150 Releasing & Circulating Overshots 41
Page 42 Series 70 and 150 Overshots Manual A120
Top Sub
A Type Packer
Bowl
Spiral Grapple
Spiral Grapple Control
Lock Rings
Guide
Spacer Ring
(only used with Spiral Grapples
and Type A Packers)
OVERVIEW
Logan Lock Rings provide a positive means for locking and releasing
straight-threaded, shouldered joints
that will not back off. Lock Rings are
installed between the top sub and the
bowl, and are designed to keep the top
sub from inadvertently unthreading from
the bowl. Lock Rings are typically used
when a significant amount of torque is
being applied through the overshot to
the fish (such as encountered during
back-off operations). Excessive torque
is not necessary when Lock Rings are
used. Lock Rings eliminate the hazardous practices of using steel straps or
installing set screws to secure the bowl
to the top sub. Lock Rings can be used
with either a basket or spiral grapples.
CONSTRUCTION
Logan Lock Rings are precision machined from stress relieved, heat-treated alloy steel. Lock Rings are used in
pairs and consist of two identical rings
with cam-teeth on one face, knurls on
the other, and two break-out grooves
on the edges.
DISASSEMBLY
The pitch of the cam-teeth is greater
than the thread pitch of the bowl. When
reverse rotation is applied, the camtoothed edges will wedge against each
other to effectively lock the top sub to
the bowl.
ASSEMBLY
Position the rings together so the breakout grooves align and the cam-teeth
are intermeshed. Place the lock rings
on the top sub. As the bowl is threaded
and the tool joint made-up, the knurled
faces opposite the cam-teeth will grip
the shoulders.
Heavy make-up torque is not neccessary. Joints are properly made up when
reverse rotation is applied and the camteeth shoulders slightly separate.
A spacer is required if the overshot is
dressed with a spiral grapple and a
Type A packer. The spacer is installed
into the bowl and on top of the Type A
packer. The spacer fills the void produced by the extra standoff caused by
the top sub and lock rings. A spacer
is not required when a Type A packer
is not used.
CALCULATED STRENGTHS
COMPLETE
ASSEMBLY
LOGAN
BOWL NO.
BOWEN
BOWL NO.
MAXIMUM
CATCH SIZE W/
SPIRAL GRAPPLE
OVERSHOT
O.D. (IN)
SPIRAL
GRAPPLE
150-231-D
150-263-D
150-313-E
150-350-A
150-414-A
150-338-D
150-363-A
150-363-E
150-375-D
150-388-D
150-376-D
150-400-A
150-393-D
150-419-A
150-400-D
150-413-A
150-412-A
150-425-A
150-413-D
150-438-A
150-388-E
150-425-D
150-4375-A
150-450-A
150-438-D
150-482-A
150-451-D
150-450-D
150-456-D
150-469-C
150-500-A
150-463-D
150-468-C
150-444-D
150-513-A
150-525-A
150-462-D
150-488-D
150-531-A
A1950
A2000
A2001
A2002
A20025
A2003
A2004
A2005
A20055
A20056
A20057
A2006
A2007
A2008
A2009
A2010
A20105
A2011
A2012
A2013
A20135
A2014
A20145
A2015
A2016
A2017
A20161
A20175
A2018
A2019
A2020
A2021
A20215
A20217
A2022
A2023
A20235
A2024
A2025
B-8921
B-10201
9306
B-4743
1446
B-5088
B-5082
9271
37587
B-1836
B-1828
B-4738
B-5103
B-5100
B-5106
9107
8223
B-4824
B-5117
B-5114
21302
B-5128
9637
B-5125
B-4621
B-4734
A-3795
17203
B-5153
9111
B-5150
B-5131
9121
B-9775
B-4688
9517
B-6232
B-5156
B-5144
2
2-1/8
2-3/8
2-3/8
2-3/8
2-1/2
2-1/2
2-7/8
3-1/16
3-1/8
2-7/8
2-7/8
3-1/16
3-1/16
3-1/8
3-1/8
3-1/8
3-1/8
3-1/4
3-1/4
3-3/8
3-3/8
3-3/8
3-3/8
3-1/2
3-1/2
3-1/2
3-21/32
3-21/32
3-21/32
3-21/32
3-3/4
3-3/4
3-13/16
3-3/4
3-7/8
3-7/8
4
4
2-5/16
2-5/8
3-1/8
3-1/2
4-1/8
3-3/8
3-5/8
3-5/8
3-3/4
3-7/8
3-3/4
4
3-15/16
4-3/16
4
4-1/8
4-1/8
4-1/4
4-1/8
4-3/8
3-7/8
4-1/4
4-3/8
4-1/2
4-3/8
4-13/16
4-1/2
4-17/32
4-9/16
4-11/16
5
4-5/8
4-11/16
4-7/16
5-1/8
5-1/4
4-5/8
4-7/8
5-5/16
50,400
101,600
193,500
309,000
455,000
258,000
346,200
193,500
217,700
155,100
214,000
304,000
265,400
291,800
262,900
310,200
310,200
291,800
225,000
254,000
102,500
262,900
281,500
320,000
267,400
456,000
271,000
260,400
276,400
332,000
394,000
270,600
261,300
137,500
489,000
451,000
186,800
385,000
402,000
36,300
86,400
173,200
265,500
390,000
213,300
307,700
157,400
221,200
144,200
192,800
221,500
219,000
263,000
217,000
255,000
255,000
263,000
202,000
234,200
97,500
217,000
249,400
280,000
220,700
396,000
226,000
233,400
228,100
279,000
338,000
218,000
233,000
118,000
447,000
389,500
166,700
241,000
351,000
28,900
61,000
118,000
167,000
265,000
163,500
219,800
78,700
179,700
98,000
121,400
199,000
160,100
118,200
125,100
170,000
170,000
118,200
127,500
147,500
66,500
116,800
167,900
176,000
144,300
286,000
146,500
170,500
157,900
199,500
210,000
150,900
138,000
44,800
354,000
276,500
104,200
167,000
273,000
NOTES:
1) All strengths are calculated theoretical yield points and are accurate within 20%. All strengths assume a straight, steady pull and
full grapple engagement of a round fish. Anything less than straight pulling or full engagement will substantially reduce the strength.
2) No tong marks should be applied to the bowl. Tong marks and other surface damage to the bowl will also reduce the strength.
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such
tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil
Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
CALCULATED STRENGTHS
COMPLETE
ASSEMBLY
LOGAN
BOWL NO.
BOWEN
BOWL NO.
MAXIMUM
CATCH SIZE W/
OVERSHOT
SPIRAL GRAPPLE O.D. (IN)
SPIRAL
GRAPPLE
150-500-D
150-544-A
150-512-D
150-513-D
150-556-A
150-555-A
150-538-D
150-581-A
150-550-D
150-563-A
150-594-A
150-563-D
150-575-A
150-606-A
150-575-D
150-613-A
150-619-A
150-588-D
150-612-C
150-663-A
150-576-D
150-638-D
150-650-D
150-663-D
150-713-A
150-688-D
150-738-A
150-763-A
150-725-D
150-775-A
150-738-D
150-762-C
150-763-C
150-777-A
150-788-A
150-750-D
150-775-C
150-763-D
150-813-A
150-775-D
A2026
A2027
A20285
A2028
A2029
A20295
A2030
A2031
A20315
A2032
A2033
A2034
A2035
A2036
A2037
A20375
A2038
A2039
A20395
A2040
A20402
A20405
A20407
A2041
A2042
A2043
A2044
A2045
A2046
A2047
A2048
A20485
A2049
A20495
A2050
A2051
A2052
A2053
A2054
A2055
B-5430
B-5427
4717
B-5164
5898
B-4821
B-5167
B-4816
B-4971
5700
5735
B-5170
8977
B-4831
B-7098
905
B-7095
B-5173
7788
B-4827
B-11825
4503
9205
8617
B-2791
8980
B-3522
7574
B-5208
B-4218
9694
1875
1641
1657
B-2109
9011
9164
9862
B-3711
9134
4-1/8
4-1/8
4-1/4
4-1/4
4-1/4
4-1/4
4-1/2
4-1/2
4-5/8
4-5/8
4-5/8
4-3/4
4-3/4
4-3/4
4-7/8
4-7/8
4-7/8
5
5
5
5-1/8
5-1/4
5-3/8
5-1/2
5-1/2
5-3/4
5-3/4
6
6-1/8
6-1/8
6-1/4
6-1/4
6-1/4
6-1/4
6-1/4
6-3/8
6-3/8
6-1/2
6-1/2
6-5/8
296,000
547,600
312,500
356,800
526,600
439,200
279,000
439,200
297,000
420,000
514,100
360,400
432,900
431,000
273,500
405,000
404,500
323,500
468,000
637,000
135,000
403,000
385,500
386,000
637,500
367,000
637,500
611,300
435,000
637,000
450,400
542,468
502,100
627,600
586,800
479,000
385,500
418,200
586,500
422,000
5
5-7/16
5-1/8
5-1/8
5-9/16
5-9/16
5-3/8
5-13/16
5-1/2
5-5/8
5-15/16
5-5/8
5-3/4
6-1/16
5-3/4
6-1/8
6-3/16
5-29/32
6-1/8
6-5/8
5-3/4
6-3/8
6-1/2
6-5/8
7-1/8
6-7/8
7-3/8
7-5/8
7-1/4
7-3/4
7-3/8
7-5/8
7-5/8
7-7/8
7-7/8
7-1/2
7-3/4
7-5/8
8-1/8
7-3/4
258,500
435,500
264,000
301,000
494,300
396,000
258,000
396,000
258,000
378,500
421,300
308,400
411,600
381,000
230,700
367,000
341,200
283,500
440,000
574,300
115,000
356,000
325,000
325,000
574,300
332,000
574,300
532,600
392,000
574,300
427,283
479,044
449,900
542,400
515,600
454,000
325,000
396,700
515,500
400,000
201,000
277,100
196,000
232,200
362,500
286,000
186,200
286,000
186,200
273,000
297,400
234,500
303,275
275,500
178,000
298,000
282,700
218,500
322,000
462,000
71,500
256,000
232,000
232,000
462,000
253,000
462,000
404,300
298,000
462,000
327,900
364,490
363,200
395,000
413,700
339,000
232,000
322,900
413,500
318,000
NOTES:
1) All strengths are calculated theoretical yield points and are accurate within 20%. All strengths assume a straight, steady pull and
full grapple engagement of a round fish. Anything less than straight pulling or full engagement will substantially reduce the strength.
2) No tong marks should be applied to the bowl. Tong marks and other surface damage to the bowl will also reduce the strength.
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference
to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell
Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
44 Logan Series 150 Releasing & Circulating Overshots
Manual A120 Series 70 and 150 Overshots Page 45
CALCULATED STRENGTHS
COMPLETE
ASSEMBLY
LOGAN
BOWL NO.
BOWEN
BOWL NO.
MAXIMUM
CATCH SIZE W/
SPIRAL GRAPPLE
OVERSHOT
O.D. (IN)
150-825-A
150-788-D
150-838-A
150-800-D
150-814-D
150-813-D
150-812-D
150-837-D
150-863-A
150-825-D
150-838-D
150-888-A
150-850-D
150-900-A
150-863-D
150-913-A
150-875-D
150-762-A
150-888-D
150-889-D
150-937-A
150-938-A
150-913-D
150-963-A
150-950-D
150-1006-A
150-963-D
150-1013-A
150-1025-D
150-1050-A
150-1063-A
150-1125-A
150-1138-A
150-1175-A
150-1275-A
150-1375
150-1600
150-1675
150-2075
A2056
A2057
A2058
A20587
A20590
A2059
A20595
A20598
A2060
A20605
A2061
A2062
A2063
A2064
A2065
A2066
A2067
A20675
A2068
A2069
A20695
A2070
A2071
A2072
A2073
A2074
A2075
A2076
A2077
A2078
A2079
A2080
A2081
A2082
A2083
A2084
A2085
A2086
A2087
B-3034
B-5224
277
M-8997
9817
9219
B-3264
17209
B-3819
9571
B-5356
M-1026-1
9233
B-5232
B-7103
B-4516
9239
B-5243
9852
B-5259
1283
B-1501
B-5267
266
9062
B-1231
B-5286
8962
B-5299
B-5307
B-5323
B-12824
26257
5331
15802
33008
68030
64555
31655
6-5/8
6-3/4
6-3/4
6-7/8
7
7
7
7
7
7-1/8
7-1/4
7-1/4
7-3/8
7-3/8
7-1/2
7-1/2
7-5/8
7-5/8
7-3/4
7-3/4
7-3/4
7-3/4
8
8
8-3/8
8-3/8
8-1/2
8-1/2
8-5/8
8-7/8
9
9-5/8
9-3/4
10-1/8
11-1/4
12
14
14-3/4
16-3/4
8-1/4
7-7/8
8-3/8
8
8-1/8
8-1/8
8-1/8
8-3/8
8-5/8
8-1/4
8-3/8
8-7/8
8-1/2
9
8-5/8
9-1/8
8-3/4
9-1/4
8-7/8
8-7/8
9-3/8
9-3/8
9-1/8
9-5/8
9-1/2
10-1/16
9-5/8
10-1/8
10-1/4
10-1/2
10-5/8
11-1/4
11-3/8
11-3/4
12-3/4
13-3/4
16
16-3/4
20-1/4
SPIRAL
GRAPPLE
637,500
531,900
637,000
436,000
453,000
453,000
439,200
587,977
637,000
422,000
430,000
586,900
422,000
637,000
436,000
637,000
458,000
657,000
458,000
430,000
637,000
592,000
396,000
602,700
447,500
637,500
419,500
602,700
657,000
586,600
586,800
586,800
565,900
616,000
605,000
1,022,314
1,164,000
1,197,674
574,300
467,300
542,250
406,900
429,500
429,500
395,800
557,764
574,300
400,000
385,000
515,600
400,000
574,300
385,000
574,300
435,000
578,000
435,000
385,000
542,250
520,000
347,500
510,750
424,500
574,300
376,000
492,000
578,000
515,400
515,600
515,600
502,900
528,000
562,250
745,564
1,175,000
1,226,777
1,479,060
462,000
375,000
408,250
350,000
329,500
329,500
318,400
428,051
462,000
307,300
295,000
426,500
309,000
462,000
309,000
462,000
333,000
465,000
333,000
295,000
408,250
340,000
236,000
398,600
325,500
462,000
341,000
391,000
465,000
413,600
426,500
413,700
380,000
435,000
444,000
1,344,600
NOTES:
1) All strengths are calculated theoretical yield points and are accurate within 20%. All strengths assume a straight, steady pull and
full grapple engagement of a round fish. Anything less than straight pulling or full engagement will substantially reduce the strength.
2) No tong marks should be applied to the bowl. Tong marks and other surface damage to the bowl will also reduce the strength.
LEGAL NOTICE
All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such
tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan
Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products.
Bowen is a registered trademark of National Oilwell Varco.
Manual A120 Logan Series 150 Releasing and Circulating Overshots Page 47