Académique Documents
Professionnel Documents
Culture Documents
Day 1:
I started to wonder what my project was going to be. I searched for
websites such as (Little Bits, 2016) to gather an inspiration. However, I
wasnt getting many ideas. Due to this, I had a very small number of
ideas. After more searching, I got a piece of paper and started drawing a
design of anything I could think of. It turned out to be pretty good. The
design was a robot made out of little bits components and cardboard. On
the robot, there are wheels connected at the bottom of it. I dont think this
design is very helpful in society. Next time, Im going to try and make a
better design that assists society in anyway possible.
Day 2:
Today I reviewed my design. I was confused how to make it. There were
little bits everywhere causing the design to present a vague
comprehension. I didnt know what to do until I realised that I should start
from scratch and know recreate the design that is from my head using the
first design as a small support. I began recreating the design. Step by
step, I drew the boxed head connecting to the body. I carefully put the
connections of the little bits in so it was understandable. Finally, I was
done creating the robot design. Then I looked at the complete design and
figured out that something was missing. I couldnt figure it out for quite a
long time until it hit me. There was a robot. However, in order for the
robot to be of full use, it had to be controlled. There was a simple answer
to this case, a little bits remote. Basically, its a remote created from little
bits. Seeing as how I had to create a remote now, I had to create a
completely new design because I couldnt put the wireless receiver design
in the old robot design. So, there I was. I started a new design. This design
involved a robot and a remote. The little bits components were placed in
the correct areas and the design soon came out to be a fantastic produce.
It turned out great. It was most clear to understand. The purpose of this
bag was to carry up to 500grams of rubbish. The remote controls its
movements so you can take it with you to carry. However, in the end, I
was not able to exhibit a design that displays all of the necessary little bits
components. Next time, I will try to make a design being able to see all
the little bits components and be more distinguishing when showing the
equipment used in making it.
Day 3:
Today, I started the creation of the robot. I had to make a little bits car in
order for the project to move. I started off by collecting the materials I
required. They were 2 DC motors, 1 wireless receiver, 1 wireless
Day 4:
Day 5:
the other. Dc motors and little bits had to be changed . Another one of them
was, The wireless receiver was acting faulty. After changing the power and
moving the wireless receiver around, it started working again. One more of
them was, One of the wheels didnt work. After changing the power, the wheel
still didnt work. Only after we changed a DC motor, it worked . I found it really
Day 7:
The project can manage the weight of the bin and decently moves.
The signal between the wireless receiver and transmitter is strong.
All little bits stay on mounting board.
For the cons side (thinking it is the negatives that the finished project has) I wrote:
The machine cant carry much weight or itll stop functioning properly.
One of the wheels dont work anymore. It use to work but not anymore.
The machines slower than it used to be due to the weight.
Bibliography