Vous êtes sur la page 1sur 20

S&C Alduti-Rupter Switches with Power Fuses

Outdoor Distribution (14.4 kV through 46 kV)

Specifications
Conditions of Sale
STANDARD: Sellers standard conditions of sale set
forth in Price Sheet 150 apply, except as modified under
WARRANTY QUALIFICATIONS on page 2.

SPECIAL TO THIS PRODUCT:


INCLUSIONS: S&C Alduti-Rupter Switches with Power
Fuses are available in three-pole group-operated designs
that feature pole-units mounted on individual bases for
vertical mounting. Single-Pole Style switches are also
available in vertical mounting configurations for use in
single-phase switching applications. Single-Pole Style
switches are operable using a conventional hookstick.
All three-pole Alduti-Rupter Switches with Power Fuses
are provided with an operating mechanism that includes:
Three switch poles.
A detailed erection drawing (ED) of the applicable
mounting arrangement.
All required interphase and vertical pipe as specified
on the erection drawing (ED). Operating mechanism
includes three 10-4 (3150 mm) sections of vertical
pipe (1 (32 mm) NPS for reciprocating operating
mechanisms and 1 (38 mm) NPS for rotating operating mechanisms).
The appropriate set of operating-mechanism components; e.g., handle, rod guides or guide bearings, couplings, bell crank assembly, etc.
Complete installation and maintenance instructions.
Mounting Arrangements
S&C Three-Pole Alduti-Rupter Switches with Power Fuses
are available in Standard Mounting Arrangements as
described in S&C Data Bulletin 771-80. Departures from
Standard Mounting Arrangements are also available and
fall into three categories:
1. Standard Minor Modifications of Standard Mounting
Arrangements are those which are so frequently
encountered that they are included on S&Cs basic
erection drawings (ED). Applicability of Standard
Minor Modifications are listed in the table on page 8.
The applicable Standard Minor Modifications may be

specified by adding the appropriate Catalog Number


Suffix -S to the erection drawing (ED) number.
2. Special Minor Modifications of Standard Mounting
Arrangements are those which include such departures
as special base drillings or special mounting brackets for
operating-mechanism components. For this category of
special, S&C will prepare a custom erection drawing
(ED) based on the Standard Mounting Arrangement
erection drawing (ED). Switches will be supplied with an
operating mechanism for the Special Minor Modification
of a Standard Mounting Arrangement.
3. Special Mounting Arrangements are those which
involve complete departures from the Standard
Mounting Arrangements brought about by customizing
an S&C Alduti-Rupter Switch with Power Fuses to fit the
users structure. Custom erection drawings (ED) will be
provided as required.
EXCLUSIONS: Alduti-Rupter Switches with Power Fuses
do not include connectors. Various connector arrangements
are available as listed in the table on page 13. Specify the
quantity and catalog number of connector arrangement
desired.
Alduti-Rupter Switches with Power Fuses do not include
holders, refill units, or fuse units.
SPECIFICATION DEVIATIONS: S&C Alduti-Rupter
Switches with Power Fuses are offered with a choice
of Cypoxy or porcelain station post insulators. The
standard insulator color is gray. When switches are to be
provided with special insulators or special connectors,
consult the nearest S&C Sales Office for availability.
Switches of a given voltage rating can be furnished with
insulators of the next higher voltage ratingadd suffix -Z3
to the catalog number.

Cypoxy is the S&C trademark for S&Cs cycloaliphatic epoxy resin

system. Cypoxy is nontracking, self-scouring, nonweathering . . . theres


never a compromise of insulation integrity.

S&C Alduti-Rupter Switches with Power Fuses are manufactured in accordance with a quality system certified to ISO 9001, and they are Rural

Utilities Service approved.

March 2, 2015
S&C Electric Company 1998-2015, all rights reserved

Specification Bulletin 771-31

S&C Alduti-Rupter Switches with Power Fuses


Conditions of SaleContinued
Switches can be supplied with tin-plated terminal pads. To
specify, add suffix -Z5 to the catalog number of the switch.
Single- and two-pole group-operated switches are also
available for Alduti-Rupter Switches with Power Fuses.
Single-pole (Catalog Number Suffix -P1)
Two-pole (Catalog Number Suffix -P2).
Alduti-Rupter Switches with Power FusesType SM
does not include SM Refill Units or SM Fuse Holders. The
catalog number of the holder may be obtained from the
same horizontal line in which the switch is listed.
Alduti-Rupter Switches with Power FusesType SMD
do not include SMD Fuse Units or SMU-20 Fuse Units.
In selecting a refill unit or fuse unit, watch these points:
Alduti-Rupter Switches with Power FusesType SM
match refill unit type to holder type.
Alduti-Rupter Switches with Power FusesType
SMDselect fuse unit of the type indicated.
Refill units and fuse units are listed separately. In
selecting a refill unit or fuse unit, consider the following:
1. DescriptionSM-4, SM-5, SMD-1A, SMD-2C, or
SMU20
2. Voltage rating
3. Ampere rating
4. Speed.
POWER OPERATION: Power operation or, if desired,
remote supervisory control may be provided for S&C AldutiRupter Switches with Power Fuses by the addition of the
appropriate S&C Switch OperatorType AS-1A, or AS-10,
or by adding an S&C 6801M Automatic Switch Operator.

2S&C Specification Bulletin 771-31

S&C Switch OperatorsTypes AS-1A and Type AS-10 are


for power operation of Alduti-Rupter Switches with Power
Fuses with rotating-type and reciprocating-type operating
mechanisms, respectively. These switch operators are
high-speed operators, with operating times not exceeding
.75 second and 1.2 seconds maximum, respectively. This
high operating speed provides sufficient moving-contact
velocity in the interrupters to ensure full interrupting
capability and long operating life.
6801M Automatic Switch Operators are available in
two versionstorsional, for rotating-type mechanisms,
and reciprocating, for reciprocating-type operating
mechanisms. Both versions operate in .5 seconds. This
high operating speed is fully compatible with the movingcontact velocity required by the interrupters to ensure full
interrupting capability for the applicable switch styles and
mounting arrangements.
Power operation is available for certain mounting
arrangements only. Consult the nearest S&C Sales Office
for availability.
For additional details concerning S&C Switch
OperatorsTypes AS-1A or AS-10, refer to Specification
Bulletin 769-31. For additional details concerning M Series
Switch Operators, refer to Specification Bulletin 1045M-31.
WARRANTY QUALIFICATIONS: The standard warranty
contained in S&Cs standard conditions of sale, as set forth
in Price Sheet 150, does not apply when Alduti-Rupter
Switches with Power Fuses are power operated using a
switch operator other than S&C manufacture.

S&C Alduti-Rupter Switches with Power Fuses


How to Order
Alduti-Rupter Switch with Power Fuses
1. Switch and connectors
a. Obtain the catalog number of the desired switch
from pages 6 and 7.
b. For three-pole switches, obtain the ED number of
the desired mounting arrangement from S&C Data
Bulletin 771-80.
If a Standard Minor Modification is desired for a
three-pole switch, obtain the suffix of the desired
modification from page 8. Add the suffix to the
ED number of the switch.
c. If special minor modifications of standard mounting
arrangements or special mounting arrangements
are desired, refer to the Mounting Arrangements
section on page 1.
d. If specification deviations are desired, such as
switches furnished less insulators, with insulators of
the next higher or lower voltage rating, less bases,
less switch poles, or with additional switch poles,
see the Specification Deviations section on pages
1 and 2.
e. If connectors are desired, obtain the catalog number
of the desired connector from page 13.

2. Fuse components
a. For Type SM Power Fuses: Obtain the catalog
number of the applicable holder from the Holder
column on page 6, reading from the same line on
which the switch catalog number is listed, and taking care to note the number of holders required
per switch. Next, obtain the catalog number of the
desired refill unit from the tables on pages 9 and 10,
taking care to match the voltage rating of the refill
unit to that of the switch.
b. For Type SMD Power Fuses: Obtain the catalog
number of the desired fuse unit from the tables on
pages 11 and 12, taking care to match the voltage
rating of the fuse unit to that of the switch.

Handling Tools
Obtain the catalog number of the recommended handling
tool(s) from the table on page 8.
Note: If power operation or remote supervisory
control are desired, S&C Switch OperatorType AS-1A
and AS-10, or 6801M Automatic Switch Operator may be
added to switches in certain mounting arrangements. For
ordering information on S&C Switch OperatorType AS-1A
and AS-10 see Specification Bulletin 769-31. For ordering
information on 6801M Automatic Switch Operators see
Specification Bulletin 1045M-31.
Note: Spare or replacement parts are ordered using the
same method outlined above.

S&C Specification Bulletin 771-313

S&C Alduti-Rupter Switches with Power Fuses


Application Classifications (See symbols on pages 6 and 7)
Application

Symbol

Three-phase transformer (or three-phase bank


of single-phase transformers) connected solidly
grounded-wye on the primary (switch) side and
delta on the secondary side

All other connections of three-phase


transformers (or three-phase banks of singlephase transformers)including autotransformers

Single-phase transformer connected phase-toground on the primary (switch) side

Single-phase transformer connected phase-tophase on the primary (switch) side

Three-phase circuits with all load-side threephase transformers (or three-phase banks of
single-phase transformers) connected solidly
grounded-wye on the primary (switch) side and
delta on the secondary side, and all load-side
single-phase transformers connected phase-toground on the primary (switch) side

Three-phase circuits with load-side transformers


connected other than as described above

Single-phase circuits with all load-side trans


formers connected phase-to-ground on the
primary (switch) side

Single-phase circuits with load-side transformers


connected other than as described above

Load Splitting
(Parallel or
Loop Switching)

Line
Switching

Load Dropping

Line Dropping

Load
Dropping

Cable Dropping
(charging current)
Capacitor Bank Switching,
Single Bank Only

Solidly or
EffecUngrounded
tively
System
Grounded
System

Three-phase circuits with all load-side threephase transformers (or three-phase banks of
single-phase transformers) connected solidly
grounded-wye on the primary (switch) side and
delta on the secondary side, and all load-side
single-phase transformers connected phase-toground on the primary (switch) side

Three-phase circuits with load-side transformers


connected other than as described above

Single-phase circuits with all load-side trans


formers connected phase-to-ground on the
primary (switch) side

Single-phase circuits with load-side transformers


connected other than as described above

Shielded cable

100

100

Load Splitting

Cable
Switching

Three-Pole Switch

Ungrounded
System

Qualifications

Parallel
Switching

Load Dropping
and
Magnetizing
Current
Switching

Single-Pole Switch
Solidly or
Effectively
Grounded
System

Class

Transformer
Switching

Maximum
Interrupting
Duty,
Amperes,
RMS

Unshielded cable
Grounded capacitor bank
Ungrounded capacitor bank

FOR FOOTNOTES SEE BOTTOM OF PAGE 5

4S&C Specification Bulletin 771-31

S&C Alduti-Rupter Switches with Power Fuses


Conditional Applications (See symbols in parentheses on pages 6 and 7)
Alduti-Rupter Switch
Style

Voltage
Rating, kV

Application
Symbol

K
34.5
L
Three-Pole Double-Break
K
46
L
14.4

L
H

Three-Pole Vertical-Break

25

14.4

25

Maximum Interrupting Duty

Over 15.5 and up through 31.7

60 amperes

Over 31.7 and up through 38.0

Line dropping only

Over 15.5 and up through 20.0

60 amperes

Over 20.0 and up through 38.0

Line dropping only

Over 15.5 and up through 31.7

60 amperes

Over 31.7 and up through 48.3

Line dropping only

Over 15.5 and up through 20.0

60 amperes

Over 20.0 and up through 48.3

Line dropping only

Over 12.0 and up through 17.0

Line dropping only

Over 15.5 and up through 22.8

60 amperes

Over 22.8 and up through 27.0

Over 15.5 and up through 19.0

Cable and line dropping only

Over 19.0 and up through 27.0

Line dropping only

Over 12.0 and up through 27.0

Line dropping only

Over 15.5 and up through 17.0

Line dropping only

Over 15.5 and up through 22.8

60 amperes

Over 22.8 and up through 27.0

Over 15.5 and up through 19.0

Cable and line dropping only

Over 19.0 and up through 27.0

Line dropping only

Over 15.5 and up through 27.0

Line dropping only

H
Single-Pole

Maximum Operating Voltage


Line-to-Line, kV

K
L

Where maximum operating voltage for a conditional application is

lower than the lowest range listed, refer to Application Classifications


table on page 4 for applicable maximum interrupting duty values.

Three-Pole Vertical-Break and Single-Pole Styles may be applied for

cable dropping (charging current) of 3 miles (4.8 km) of No. 1/0 cable or
1.2 miles (1.9 km) of 1000 kc mil cable, or equivalent, provided phase
spacing is 55 inches (1397 mm) minimum.

FOOTNOTES FOR TABLE ON PAGE 4


Lower values may apply for conditional applications. Refer to

Conditional Applications table above.

X0/X1 from 0 to + 3.0 and R0/X1 from 0 to + 1.0.


Applies to switching of the primary of a transformer which remains

energized from the secondary bus, or to disconnecting of a loaded secondary bus from one of two transformers supplying that bus while the
primary side of the transformer remains energized.

Same as continuous-current rating.


Alduti-Rupter Switches with Power Fuses will drop loads through

600 amperes, and will switch magnetizing currents associated with such
loads.

Maximum length of line: 100 miles (161 km).


80 miles (129 km) of No. 1/0 cable, or 30 miles (48 km) of 1000 kc mil

cable, or equivalent.

S&C Specification Bulletin 771-315

S&C Alduti-Rupter Switches with Power Fuses


Alduti-Rupter Switches wth Power FusesType SM for Vertical Mounting
Rating

Style

Three-Pole
Double-Break
with Disconnect
180 Opening
Fuse

Fuse
Type and
Max Amp
Rating

SM-4
200E

Switches (less Holders)

Nom.

Max

BIL

Fuse
Interr.
Amps,
RMS,
Sym.

34.5

38

200

6 250

kV

Applications
(see pages
4 and 5)

AEGH(KL)

Cypoxy Station Porcelain Station


Post
Post
Insulators
Insulators
Catalog
Number

Catalog
Number

320704R10-E

320704R10

Holder
(Refill Units not
included)

No.
Reqd.

Catalog
Number

Page
Reference for
Dimensional
Information

86054

14

Three-Pole
Vertical-Break
with Disconnect
180 Opening
Fuse

Single-Pole
with Disconnect
180 Opening
Fuse

SM-5
300E

34.5

38

200

17 500

AEGH(KL)

320714R10-E

320714R10

86154R2

SM-4
200E

14.4
25

17.0
27

110
150

12 500
9 400

AEGHK(L)
AEG(HKL)

135302R4-E
135303R5-E

135302R4
135303R5

3
3

86052
86053
15

SM-5
400E

14.4
25

17.0
27

110
150

SM-5
in
parallel
720E

14.4

17.0

110

SM-4
200E

14.4
25

17.0
27

110
150

34 000
20 000

AEGHK(L)
AEG(HKL)

135332R4-E
135333R5-E

135332R4
135333R5

3
3

86152R2
86153R2

25 000

AEGHK(L)

135442R5-E

135442R5

86152R2

12 500
9 400

AEGHK(L)
AEG(HKL)

136302-E
136303R5-E

136302
136303R5

1
1

86052
86053

16

17
SM-5
400E

14.4
25

17.0
27

110
150

34 000
20 000

AEGHK(L)
AEG(HKL)

The switches shown include the appropriate set of operating-

mechanism components as specified on the erection drawing (ED) for


the switch. Switches do not include connectors (refer to table on page 13)
or SM Refill Units (refer to tables on pages 9 and 10).

136332R2-E
136333R5-E

136332R2
136333R5

1
1

86152R2
86153R2

Applications indicated by symbols in parentheses are conditional.

See Conditional Applications table, page 5.


Standard

Arrangements, designated by erection drawing (ED) number, as


described in Data Bulletin 771-80. Specify the applicable erection drawing
(ED) number when ordering.

Minor Modifications of the Standard Mounting


Arrangement(s) for these switches are listed in the table on page 8. The
applicable Standard Minor Modifications listed therein may be specified
by adding the appropriate S suffix to the erection drawing (ED) number.
Refer to page 1 for Special Minor Modifications and Special Mounting
Arrangements for these switches.

Switches are rated 600 amperes, RMS, continuous and interrupting.

Three-Pole Double-Break Style Switches with Power Fuses rated

The switches are available in a variety of Standard Mounting

Momentary rating of the switches is 40,000 amperes, RMS, asymmetrical,


except for 14.4-kV switches with Type SM-5 Power Fuses, for which the
momentary ratings, based on limiting of the let-through current by the
fuses, are 54,000 amperes, RMS, asymmetrical at 13.8 kV and
14.4 kV, 60 hertz only, (55,000 amperes, RMS, asymmetrical on
7.2/12.47GrY-kV 60-hertz systems only). Maximum ampere ratings of
fuses are shown in second column.
Symmetrical ratings assigned are based on available short-circuit

current at locations where the X/R ratio is 15. The interrupting ratings
expressed in amperes, RMS, asymmetrical are 1.6 times the symmetrical
ratings listed. Higher symmetrical ratings have been determined for these
fuses applied at lower system voltages and in locations where X/R = 10
and X/R = 5. These higher ratings as well as asymmetrical ratings are
given in S&C Descriptive Bulletin 242-30.

6S&C Specification Bulletin 771-31

34.5 kV and 46 kV, while provided with design features for fault closing,
are not assigned fault closing ratings or capabilities because special
mounting arrangements may deny the requisite high speed closing
behavior.
Maximum ampere rating at 25 kV is 300E.
60-hertz rating. For systems above 15.5 kV through 17.0 kV,

interrupting rating is 25,000 amperes, RMS, symmetrical, 50/60 hertz.


60-hertz rating.

S&C Alduti-Rupter Switches with Power Fuses


Alduti-Rupter Switches with Power FusesType SMD for Vertical Mounting
Cypoxy Station
Post Insulators

Porcelain Station
Post Insulators

Applications
Catalog Number
(see pages
(including
4 and 5)
Fuse-Unit
End Fittings)

Catalog Number
(including
Fuse-Unit
End Fittings)

Rating
Style

Three-Pole
Double-Break

Fuse
Type and
Max Amp
Rating

SMD-1A
200E

kV

Fuse
Interr.
Amps,
RMS,
Sym.

Nom.

Max

BIL

34.5

38

200

17 500

AEGH(KL)

145814R10-E

145814R10

46

48.3

250

13 100

AEG(KL)

145815R10-E

145815R10

Page Reference
for Dimensional
Information

18
SMD-2C
300E

SMD-20
200E

34.5

38

200

33 500

AEGH(KL)

145824R10-E

145824R10

46

48.3

250

31 500

AEG(KL)

145825R10-E

145825R10

34.5

38

200

10 000

AEGH(KL)

145844R1-E

145844R1

14.4

17.0

110

14 000

AEGHK(L)

135552R1-E

135552R1

25

27

150

12 500

AEG(HKL)

135553R5-E

135553R5

19

Three-Pole
Vertical-Break

SMD-20
200E

The switches shown include the appropriate set of operating-

mechanism components as specified by the erection drawing (ED) for the


switch. Switches do not include connectors (refer to table on page 13),
SMD Fuse Units (refer to table on page 11), or SMU-20 Fuse Units (refer
to table on page 12).

Switches are available in a variety of Standard Mounting Arrangements,

designated by erection drawing (ED) number, as described in Data


Bulletin 771-80. Specify the applicable erection drawing (ED) number
when ordering.

Switches are rated 600 amperes, RMS, continuous and interrupting.

Momentary rating of the switches is 40,000 amperes, RMS, asymmetrical,


except for switches with Type SMD-2C Power Fuses, for which the
momentary ratings, based on limiting of the let-through current by
the fuses, are 53,500 amperes, RMS, asymmetrical for models rated
34.5 kV and 50,500 amperes, RMS, asymmetrical for models rated 46 kV.
Maximum ampere ratings of fuses are shown in second column.

Symmetrical ratings assigned are based on available short-circuit

20

Applications indicated by symbols in parentheses are conditional.

See Conditional Applications table, page 5.



Standard

Minor Modifications of the Standard Mounting


Arrangement(s) for these switches are listed in the table on page 8 of
this specification bulletin. The applicable Standard Minor Modifications
listed therein may be specified by adding the appropriate S suffix to
the erection drawing (ED) number. Refer to page 1 for Special Minor
Modifications and Special Mounting Arrangements for these switches.
Three-Pole Double-Break Style Switches with Power Fuses rated

34.5 kV and 46 kV, while provided with design features for fault closing,
are not assigned fault closing ratings or capabilities because special
mounting arrangements may deny the requisite high-speed closing
behavior.
SMD-20 Power Fuses accommodate SMU-20 Fuse Units in ratings

through 200K amperes as well as 200E amperes.


60-hertz rating.

current at locations where the X/R ratio is 15. The interrupting ratings
expressed in amperes, RMS, asymmetrical are 1.6 times the symmetrical
ratings listed. Higher symmetrical ratings have been determined for these
fuses applied at lower system voltages and in locations where X/R = 10
and X/R = 5. These higher ratings as well as asymmetrical ratings are
given in S&C Descriptive Bulletins 212-30 and 242-32, as applicable.

S&C Specification Bulletin 771-317

S&C Alduti-Rupter Switches with Power Fuses


Parts
For Use on Alduti-Rupter Switches
Style

kV

Catalog
Number

Three-Pole Vertical-Break and


Single-Pole

7.2

SA-30817R2

14.4 or 25

SA-30818R4

Three-Pole Double-Break

All

SDA-10175

Three-Pole Double-Break

All

3004R1

Spare End Fittings for SMD-2C Fuse Unit

Three-Pole Double-Break

All

3032R1

Spare End Fittings for SMU-20 Fuse Unit

Three-Pole Double-Break and


Three-Pole Vertical-Break

All

3095

Item

Spare or Replacement Interrupter


Spare or Replacement Interrupter with integral mounting bracket
and muffler
Spare End Fittings for SMD-1A Fuse Unit

Previous designs of Three-Pole Double-Break Switches with Power

Fuses require catalog number 4559R1 Interrupter.

Handling Tools
For Removal and Installation of

Catalog Number

Large Round Socket

Item

SMD-2C Fuse Unit

4407R4

Small Round Socket

SMD-1A Fuse Unit

4408R4

All

4402R2

Station Prong
Universal Pole
Select to match height of installation. Refer to Specification Bulletin

851-31.

Standard Minor ModificationsFor Three-Pole Mounting Styles


Applicable to Three-Pole
Mounting Styles

Suffix to be
Added to Erection
Drawing Number

2 (67 mm) Diameter Tubular Fiberglass Insulating Section in vertical operating shaft

All

-S1

One Cypoxy Insulator Unit in vertical operating shaft

All

-S2

Insulated Interphase Sections and One Fiberglass Insulating Section in vertical operating
shaft

All

-S3

Insulated Interphase Sections and One Cypoxy Insulator Unit in vertical operating shaft

All

-S4

2 (51 mm) NPS Piperequired for rotating-type operating-mechanism vertical shaft when
such shaft exceeds three 104 (3150 mm) sections

All

-S5

Item

One extra pipe section, 2 (51 mm) pipe

All rotating
operating mechanisms

-S5A

Two extra pipe sections, 2 (51 mm) pipe

All rotating
operating mechanisms

-S5B

Refer to ED drawing

-S5C

Three extra pipe sections, 2 (51 mm) pipe


Key Interlocksingle lock for locked-open application

All

-S6

Auxiliary contact switch with 4 NO & 4 NC contacts (600 VAC, 20 Amperes)

All

-S7

Provision for power operation of pole-mounted switches by S&C Switch OperatorType


AS-1A or AS-10

All

-S8

Provision for power operation of steel-structure or pedestal-mounted switches by S&C Switch


OperatorType AS-1A or AS-10

All

-S9

All rated
14.4kV & 25kV

-S16

Provision for power operation of pole-mounted switches by 6801M Automatic Switch


OperatorTorsional and Reciprocating
One extra pipe section, 1 (32 mm) pipe

All reciprocating operating


mechanisms

-V1

Two extra pipe sections, 1 (32 mm) pipe

All reciprocating operating


mechanisms

-V2

Switches at 34.5 kV and 46 kV may be suitable for use with 6801M

Automatic Switch Operators. Contact the nearest S&C Sales Office for
availability.

8S&C Specification Bulletin 771-31

Not available for power-operated switches.


Not all mounting arrangements are suitable for power operation,

contact the nearest S&C Sales Office for availability.

S&C Alduti-Rupter Switches with Power Fuses


SM-4 Refill Units (For Use in SM-4 Holders)
Rating,
Amperes
Speed

1
2

3E
5E
7E
10E
13E
15E
20E
25E
30E
40E
50E
65E
80E
100E
125E
150E
175E
200E
210
Rating,
Amperes

25 kV Nominal, 27 kV Max

Catalog Number

Catalog Number

S&C Std.
TCC 115-4

S&C Std.
TCC 115-4

122001R4
122002R4

123001R4
123002R4

S&C Std.
TCC 153-4

Speed

14.4 kV Nominal, 17.0 kV Max

122005R4
122007R4
122010R4
122015R4
122020R4
122025R4
122030R4
122040R4
122050R4
122060R4
122075R4
122100R4
122125R4
122150R4
122200R4
122250R4
122275R4
122300R4

S&C Slow
TCC 119-4

252025R4
252030R4
252040R4
252050R4
252060R4
252075R4
252100R4
252125R4
252150R4
252200R4
252250R4
252275R4
252300R4

S&C Coord.
TCC 179-4

382210R4

S&C Std.
TCC 153-4

S&C Slow
TCC 119-4

123005R4
123007R4
123010R4
123015R4
123020R4
123025R4
123030R4
123040R4
123050R4
123060R4
123075R4
123100R4
123125R4
123150R4
123200R4
123250R4
123275R4
123300R4

253025R4
253030R4
253040R4
253050R4
253060R4
253075R4
253100R4
253125R4
253150R4
253200R4
253250R4
253275R4
253300R4

34.5 kV Nominal, 38 kV Max


Catalog Number
S&C Std.
TCC 115-4

Speed

1
2
Speed

3E
5E
7E
10E
13E
15E
20E
25E
30E
40E
50E
65E
80E
100E
125E
150E
175E
200E

124001R4
124002R4
S&C Std.

S&C Std.

TCC 153-4

TCC 119-4

124005R4
124007R4
124010R4
124015R4
124020R4
124025R4
124030R4
124040R4
124050R4
124060R4
124075R4
124100R4
124125R4
124150R4
124200R4
124250R4
124275R4
124300R4

254025R4
254030R4
254040R4
254050R4
254060R4
254075R4
254100R4
254125R4
254150R4
254200R4
254250R4
254275R4
254300R4

This S&C Coordinating Speed refill unit should be applied where the

maximum continuous load current does not exceed 200 amperes and
where all fault currents below 1000 amperes will be cleared by another
fuse.

S&C Specification Bulletin 771-319

S&C Alduti-Rupter Switches with Power Fuses


SM-5 Refill Units (For Use in SM-5 Holders)
Rating,
Amperes
Speed

1
2
Speed

3E
5E
7E
10E
13E
15E
20E
25E
30E
40E
50E
65E
80E
100E
125E
150E
175E
200E
250E
300E
400E
410E
420E

14.4 kV Nominal, 17.0 kV Max

25 kV Nominal, 27 kV Max

Catalog Number

34.5 kV Nominal, 38 kV Max

Catalog Number

Catalog Number

S&C Std.
TCC 115-4

S&C Std.
TCC 115-4

S&C Std.
TCC 115-4

132001R4
132002R4

133001R4
133002R4

134001R4
134002R4

S&C Std.
TCC 153-4

132005R4
132007R4
132010R4
132015R4
132020R4
132025R4
132030R4
132040R4
132050R4
132060R4
132075R4
132100R4
132125R4
132150R4
132200R4
132250R4
132275R4
132300R4
132400R4
132500R4
132600R4

S&C Slow
TCC 119-4

262025R4
262030R4
262040R4
262050R4
262060R4
262075R4
262100R4
262125R4
262150R4
262200R4
262250R4
262275R4
262300R4
262400R4
262500R4
262600R4

S&C Coord.
TCC 173-4

S&C Std.
TCC 153-4

133005R4
133007R4
133010R4
133015R4
133020R4
133025R4
133030R4
133040R4
133050R4
133060R4
133075R4
133100R4
133125R4
133150R4
133200R4
133250R4
133275R4
133300R4
133400R4
133500R4
382410R4
382420R4

These S&C Coordinating Speed refill units should be applied where

the maximum continuous load current does not exceed 400 amperes
and where all fault currents below 3000 amperes for Catalog Numbers
381410R4 and 382410R4 and 4000 amperes for Catalog Numbers
381420R4 and 382420R4 will be cleared by another fuse.

10S&C Specification Bulletin 771-31

S&C Slow
TCC 119-4

S&C Std.
TCC 153-4

S&C Slow
TCC 119-4

263025R4
263030R4
263040R4
263050R4
263060R4
263075R4
263100R4
263125R4
263150R4
263200R4
263250R4
263275R4
263300R4
263400R4
263500R4

134005R4
134007R4
134010R4
134015R4
134020R4
134025R4
134030R4
134040R4
134050R4
134060R4
134075R4
134100R4
134125R4
134150R4
134200R4
134250R4
134275R4
134300R4
134400R4
134500R4

264025R4
264030R4
264040R4
264050R4
264060R4
264075R4
264100R4
264125R4
264150R4
264200R4
264250R4
264275R4
264300R4
264400R4
264500R4

S&C Alduti-Rupter Switches with Power Fuses


SMD-1A Fuse Units
Rating,
Amperes

34.5 kV Nominal, 38 kV Max

46 kV Nominal, 48.3 kV Max

Catalog Number

Catalog Number

S&C Std.
TCC 115-1

Speed

444001R1
S&C Std.
TCC 153-1

Speed

3E
5E
7E
10E
13E
15E
20E
25E
30E
40E
50E
65E
80E
100E
125E
150E
175E
200E

S&C Std.
TCC 115-1

444003R2
444005R1
444007R1
444010R1
444013R1
444015R1
444020R1
444025R1
444030R1
444040R1
444050R1
444065R1
444080R1
444100R1
444125R1
444150R1
444175R1
444200R1

445001R1
S&C Slow
TCC 119-1

S&C Very Slow


TCC 176-1

S&C Std.
TCC 153-1

S&C Slow
TCC 119-1

S&C Coord.
TCC 176-1

564050
564065
564080
564100
564125
564150
564175
564200

445003R2
445005R1
445007R1
445010R1
445013R1
445015R1
445020R1
445025R1
445030R1
445040R1
445050R1
445065R1
445080R1
445100R1
445125R1
445150R1
445175R1
445200R1

455015R1
455020R1
455025R1
455030R1
455040R1
455050R1
455065R1
455080R1
455100R1
455125R1
455150R1
455175R1
455200R1

565050
565065
565080
565100
565125
565150
565175
565200

454015R1
454020R1
454025R1
454030R1
454040R1
454050R1
454065R1
454080R1
454100R1
454125R1
454150R1
454175R1
454200R1

SMD-2C Fuse Units


Rating,
Amperes

34.5 kV Nominal, 38 kV Max


Catalog Number

Catalog Number

S&C Std.
TCC 115-1

Speed

1
Speed

3E
5E
7E
10E
13E
15E
20E
25E
30E
40E
50E
65E
80E
100E
125E
150E
175E
200E
250E
300E

46 kV Nominal, 48.3 kV Max


S&C Std.
TCC 115-1

464001R3
S&C Std.
TCC 153-1

464003R3
464005R3
464007R3
464010R3
464013R3
464015R3
464020R3
464025R3
464030R3
464040R3
464050R3
464065R3
464080R3
464100R3
464125R3
464150R3
464175R3
464200R3
464250R3
464300R3

465001R3
S&C Slow
TCC 119-1

484015R3
484020R3
484025R3
484030R3
484040R3
484050R3
484065R3
484080R3
484100R3
484125R3
484150R3
484175R3
484200R3
484250R3
484300R3

S&C Very Slow


TCC 176-1

574050R3
574065R3
574080R3
574100R3
574125R3
574150R3
574175R3
574200R3
574250R3

S&C Std.
TCC 153-1

S&C Slow
TCC 119-1

465003R3
465005R3
465007R3
465010R3
465013R3
465015R3
465020R3
465025R3
465030R3
465040R3
465050R3
465065R3
465080R3
465100R3
465125R3
465150R3
465175R3
465200R3
465250R3
465300R3

485015R3
485020R3
485025R3
485030R3
485040R3
485050R3
485065R3
485080R3
485100R3
485125R3
485150R3
485175R3
485200R3
485250R3
485300R3

S&C Coord.
TCC 176-1

575050R3
575065R3
575080R3
575100R3
575125R3
575150R3
575175R3
575200R3
575250R3

S&C Specification Bulletin 771-3111

S&C Alduti-Rupter Switches with Power Fuses


SMU-20 Fuse Units
14.4 kV Nominal, 17.0 kV Max
K Ratings
Rating,
Amperes
Speed

E Ratings

Catalog
Number
S&C K
TCC 165-2

Rating,
Amperes
Speed

1
Speed

3K
6K
8K
10K
12K
15K
20K
25K
30K
40K
50K
65K
80K
100K
140K
200K

25 kV Nominal, 27 kV Max

702003
702006
702008
702010
702012
702015
702020
702025
702030
702040
702050
702065
702080
702100
702140
702200

5E
7E
10E
13E
15E
20E
25E
30E
40E
50E
65E
80E
100E
125E
150E
175E
200E

K Ratings

Catalog Number
S&C Std.
TCC 115-2

Speed

K Ratings

Speed

Catalog
Number
S&C K
TCC 165-2

Speed

1
Speed

3K
6K
8K
10K
12K
15K
20K
25K
30K
40K
50K
65K
80K
100K
140K
200K

704003
704006
704008
704010
704012
704015
704020
704025
704030
704040
704050
704065
704080
704100
704140
704200

5E
7E
10E
13E
15E
20E
25E
30E
40E
50E
65E
80E
100E
125E
150E
175E
200E

S&C K
TCC 165-2

612005
612007
612010
612013
612015
612020
612025
612030
612040
612050
612065
612080
612100
612125
612150
612175
612200

712015
712020
712025
712030
712040
712050
712065
712080
712100
712125
712150
712175
712200

602050
602065
602080
602100
602125
602150
602175
602200

Catalog Number
S&C Std.
TCC 115-2

704001
S&C Std.
TCC 153-2

614005
614007
614010
614013
614015
614020
614025
614030
614040
614050
614065
614080
614100
614125
614150
614175
614200

12S&C Specification Bulletin 771-31

E Ratings
Rating,
Amperes
Speed

S&C
S&C
S&C Std.
Slow
Very Slow
TCC 153-2
TCC 119-2 TCC 176-2

E Ratings
Rating,
Amperes

Catalog
Number

702001

34.5 kV Nominal, 38 kV Max


Rating,
Amperes

Rating,
Amperes

S&C
S&C
Slow
Very Slow
TCC 119-2 TCC 176-2

714015
714020
714025
714030
714040
714050
714065
714080
714100
714125
714150
714175
714200

604050
604065
604080
604100
604125
604150
604175
604200

Speed

3K
6K
8K
10K
12K
15K
20K
25K
30K
40K
50K
65K
80K
100K
140K
200K

703003
703006
703008
703010
703012
703015
703020
703025
703030
703040
703050
703065
703080
703100
703140
703200

5E
7E
10E
13E
15E
20E
25E
30E
40E
50E
65E
80E
100E
125E
150E
175E
200E

Catalog Number
S&C Std.
TCC 115-2

703001
S&C
S&C Std. S&C Slow
Very Slow
TCC 153-2 TCC 119-2
TCC 176-2

613005
613007
613010
613013
613015
613020
613025
613030
613040
613050
613065
613080
613100
613125
613150
613175
613200

713015
713020
713025
713030
713040
713050
713065
713080
713100
713125
713150
713175
713200

603125
603150
603175
603200

S&C Alduti-Rupter Switches with Power Fuses


Connectors
Illustration

Description

Accommodating Conductor

Catalog
Number

Bronze Body, Tin Plated.


Includes one 132
Galvanized Steel Bolt

No. 2 solid (33.6 mm2) through 500 kc mil


(335 mm2) stranded copper or aluminum

Bronze Body, Tin Plated.


Includes one 132
Galvanized Steel Bolt

No. 2 solid (33.6 mm2) through 500 kc mil


(335 mm2) stranded copper or aluminum

5394

Aluminum-Alloy Body, Tin Plated.


Includes two 132
Galvanized Steel Bolts

No. 2 solid (33.6 mm2) through 500 kc mil


(335 mm2) stranded copper or aluminum

4744

Aluminum-Alloy Body, Tin Plated.


Includes two 132
Galvanized Steel Bolts

No. 2 solid (33.6 mm2) through 500 kc mil


(335 mm2) stranded copper or aluminum

4746

No. 6 solid (53.5 mm2) through 250 kc mil


(168 mm2) copper or aluminum

4564R1-B

1/0 solid (53.5 mm2) through 500 kc mil (335 mm2)


copper or aluminum

4565R1-B

2/0 stranded (89 mm2) through 800 kc mil


(539 mm2) copper or aluminum

4567R1-B

Standard Bronze Pad Terminal,


Four-Bolt, Tin Plated. Includes
two 132 Galvanized Steel Bolts
for attachment to terminal pads of
switches
Not suitable for use at fuse terminal pads of Alduti-Rupter Switches

with Power FusesType SM.

4740R1

Mechanical interference with blade prevents use on single-pole style

Alduti-Rupter Switches with Power Fuses.

Suitable only for use at fuse terminal pads of Alduti-Rupter Switches

with Power FusesType SM.

S&C Specification Bulletin 771-3113

S&C Alduti-Rupter Switches with Power Fuses


Type SM for Vertical Mounting
Three-Pole Double-Break Style with Disconnect
180 Opening Fuse
Dimensions in inches
10

29

8
6

DIA.
HOLES (2)

3
DIA.
HOLES (6)

21

18

1
1

OPERATING PIPE MAY BE


FURNISHED IN THIS POSITION

19

20

39

19

HORIZONTAL
OPERATING PIPE

82
1

1 FOR SM-4
4 FOR SM-5

13 TAPPED
HOLES
(2) EACH SIDE

32

39

1
6
1
21
1 SLOTS (4)

32

53 FOR SM-4
57 FOR SM-5

1
TERMINAL PAD
DRILLING

Rating
Fuse Type
and
Max Amp
Rating

kV

Catalog Number
Fuse
Interr.
Amps,
RMS,
Sym.

Applications
(see pages
4 and 5)

Cypoxy
Station Post
Insulators

Porcelain
Station Post
Insulators

Net Wt. per Pole, Lbs.


Holder
(Refill Units
not Included)

Cypoxy Station Porcelain Station


Post Insulators Post Insulators

Nom.

Max

BIL

SM-4
200E

34.5

38

200

6 250

AEGH(KL)

320704R10-E

320704R10

86054

280

362

SM-5
300E

34.5

38

200

17 500

AEGH(KL)

320714R10-E

320714R10

86154R2

308

380

Includes weight of fuse holder.

14

Switches (less Holders)

S&C Specification Bulletin 771-31

S&C Alduti-Rupter Switches with Power Fuses


Type SM for Vertical Mounting
Three-Pole Vertical-Break Style with Disconnect
180 Opening Fuse
Dimensions in inches
38 (14.4 kV)
47 (25 kV)
26 (14.4 kV)
30 (25 kV)

63 (14.4 kV)
71 (25 kV)

9161916 SLOTS (2)

Fuse
Type
kV
and
Max
Amp
Rating Nom. Max

Rating

Catalog Number
Fuse
Interr.
Amps,
RMS
Sym.

Applications
(see pages
4 and 5)

SM-4 14.4 17.0 110


200E 25 27
150

12 500
9 400

AEGHK(L)
AEG(HKL)

135302R4-E
135303R5-E

135302R4 86052
135303R5 86053

SM-5 14.4 17.0 110


400E 25 27
150

34 000
20 000

AEGHK(L)
AEG(HKL)

135332R4-E
135333R5-E

BIL

Dimensions in Inches (to nearest )

Net Wt. per Pole, Lbs.

Switches (less Holders)


Cypoxy
Station Post
Insulators

Holder
(Refill Units
Porcelain
not
Station Post
Included)
Insulators

L1

15 16
19 20

10
14

18
22

26
30

135332R4 86152R2 15 16
135333R5 86153R2 19 20

10
14

18
22

26
30

A1

A2

L2

M1

M2

Cypoxy
Station Post
Insulators

Porcelain
Station Post
Insulators

32 32 19
36 44 23

165
206

193
260

32 40 24
36 49 27

194
242

222
296

Includes weight of fuse holder.

S&C Specification Bulletin 771-3115

S&C Alduti-Rupter Switches with Power Fuses


Type SM for Vertical Mounting
Three-Pole Vertical-Break Style with Disconnect
180 Opening Fuse
Dimensions in inches

916 1916 SLOTS (2)

Rating
Fuse Type
and
Max Amp
Rating

SM-5
in Parallel
720E

kV
Nom.

Max

BIL

14.4

17.0

110

Catalog Number
Fuse
Interr.
Amps,
RMS,
Sym.

Applications
(see pages
4 and 5)

25 000

AEGHK(L)

Includes weight of fuse holder.

16S&C Specification Bulletin 771-31

Switches (less Holders)


Cypoxy
Station Post
Insulators

Porcelain
Station Post
Insulators

135442R5-E

135442R5

Net Wt. per Pole, Lbs.


Holder
(Refill Units
not Included)

86152R2

Cypoxy Station Porcelain Station


Post Insulators Post Insulators

242

270

S&C Alduti-Rupter Switches with Power Fuses


Type SM for Vertical Mounting
Single-Pole Style with Disconnect
180 Opening Fuse
Dimensions in inches
40 (14.4 kV)
47 (25 kV)
23 (14.4 kV)
27(25 kV)

48 (14.4 kV)
54 (25 kV)

916 1916 SLOTS (2)

Fuse
Type
kV
and
Max
Amp
Rating Nom. Max

Rating

Catalog Number

Dimensions in Inches (to nearest )

Net Wt. per Pole, Lbs.

Fuse
Interr.
Amps,
RMS,
Sym.

Applications
(see pages
4 and 5)

SM-4 14.4 17.0 110


200E 14.4 27
150

12 500
9 400

AEGHK(L)
AEG(HKL)

136302-E
136303R5-E

136302
136303R5

86052
86053

12 13
16 17

10
14

18 45
34 19
20 51 42 23

101
135

122
176

SM-5 14.4 17.0 110


400E 25 27
150

34 000
20 000

AEGHK(L)
AEG(HKL)

136332R2-E
136333R5-E

136332R2
136333R5

86152R2
86153R2

12 13
16 17

10
14

18 45
36 23
20 54 44 27

130
175

151
216

BIL

Switches (less Holders)


Cypoxy
Station Post
Insulators

Porcelain
Station Post
Insulators

Holder
(Refill Units
not
Included)

A1

A2

M1

M2

Cypoxy
Porcelain
Station Post Station Post
Insulators
Insulators

Includes weight of fuse holder.

S&C Specification Bulletin 771-3117

S&C Alduti-Rupter Switches with Power Fuses


Type SMD for Vertical Mounting
Three-Pole Double-Break Style
Dimensions in inches
10
8

DIA.
HOLES (6)

A
2

B
HORIZONTAL
OPERATING PIPE

1
DIA.
HOLES (2)

20 FOR 34.5 KV
23 FOR 46 KV

OPERATING PIPE MAY


BE FURNISHED IN
THIS POSITION

90

 1
SLOTS (4)

2
F

1
5
DIA. HOLES (2)
EACH SIDE
1 APART

Catalog Number (including


Rating
Fuse
Fuse-Unit End Fittings)
Type
Applications
Fuse
and
kV
Interr. (see pages
Cypoxy
Porcelain
Max
4 and 5)
Amps,
Station Post Station Post
Amp
Insulators
Insulators
Rating Nom. Max BIL RMS,
Sym.

Net Wt. per Pole,


Lbs.

Dimensions in Inches (to nearest )

A1

A2

F1

F2

M1

M2

Cypoxy Porcelain
Station
Station
Post
Post
Insulators Insulators

SMD-1A 34.5
200E 46

38
200 17 500
48.3 250 13 100

AEGH(KL)
AEG(KL)

145814R10-E
145815R10-E

145814R10
145815R10

21 22 18 90 19 41 43 62 36 29
25 26 22 100 22 45 48 70 40 33

307
386

364
443

SMD-2C 34.5
300E 46

38
200 33 500
48.3 250 31 500

AEGH(KL)
AEG(KL)

145824R10-E
145825R10-E

145824R10
145825R10

21 22 18 90 19 41 43 62 36 29
25 26 22 100 22 45 48 71 40 33

318
397

375
454

18S&C Specification Bulletin 771-31

S&C Alduti-Rupter Switches with Power Fuses


Type SMD for Vertical Mounting
Three-Pole Double-Break Style
Dimensions in inches
29 6
29
6
29

10

2156O

856M
6

6QEDIA.
HOLES (2)

156O

6QEDIA.
HOLES (6)

18

1 6M
6M
1
2

256M

OPERATING PIPE MAY


BE FURNISHED IN
THIS POSITION

1
19
2056M
4356O

16
19

HORIZONTAL
OPERATING PIPE

1
836

34
36(6

1
5(6
 SLOTS (2)
EACH SIDE 1 APART

2256

 1
SLOTS (4)

27(6
54

Rating
Fuse Type
and
Max Amp
Rating

SMD-20
200E

kV
Nom.

Max

BIL

Fuse Interr.
Amps, RMS,
Sym.

34.5

38

200

10 000

Applications
(see pages
4 and 5)

AEGH(KL)

Catalog Number (including


Fuse-Unit End Fittings)

Net Wt. per Pole, Lbs.

Cypoxy
Station Post
Insulators

Porcelain
Station Post
Insulators

Cypoxy
Station Post
Insulators

Porcelain
Station Post
Insulators

145844R1-E

145844R1

336

412

S&C Specification Bulletin 771-31

19

S&C Alduti-Rupter Switches with Power Fuses


Type SMD for Vertical Mounting
Three-Pole Vertical-Break Style
Dimensions in inches
39 (14.4 kV)
49 (25 kV)
27 (14.4 kV)
33 (25 kV)

65 (14.4 kV)
73 (25 kV)

916 1116 SLOTS


(2) EACH SIDE
1 APART

916 1916 SLOTS (2)

Fuse
Type
kV
and
Max
Amp Nom. Max
Rating

SMD-20 14.4 17.0


200E 25
27

Rating

BIL

110
150

Fuse
Interr.
Amps,
RMS,
Sym.

Applications
(see pages
4 and 5)

14 000
12 500

AEGHK(L)
AEG(HKL)

20S&C Specification Bulletin 771-31

Catalog Number
(including Fuse-Unit
End Fittings)
Cypoxy
Station
Post
Insulators

135552R1-E
135553R5-E

Porcelain
Station
Post
Insulators

Dimensions in Inches (to nearest )

A1

A2

135552R1 16 14
135553R5 21 18

10
14

L1

18 26
22 30

L2

M1

Net Wt. per Pole, Lbs.

M2

34 36 18
38
38 21

Cypoxy
Porcelain
Station Post Station Post
Insulators
Insulators

193
219

221
273

Vous aimerez peut-être aussi