Académique Documents
Professionnel Documents
Culture Documents
Exam NS0-157
NetApp Certified Data Administrator, Clustered Data ONTAP
Version: 11.0
Topic 1, Volume A
Q1
What communication link is necessary in order to establish an inter-cluster relationship?
A. The cluster interface on each node must be able to communicate with the intercluster
interface on each node in the both the source and destination clusters
B. The cluster interface on the source cluster must be able to communicate with the cluster
interface on the destination cluster
C. The intercluster interface on the source cluster must be able to communicate with the
intercluster interface on the destination cluster
D. The intercluster interface on the source cluster must be able to communicate with the
cluster interface on the destination cluster
Answer: C
Explanation:
https://library.netapp.com/ecm/ecm_download_file/ECMP1197114
Q2
A customer wants to use FlashCache but does not want to lose the information stored in
the FlashCache card when a takeover occurs in a high-availability solution.
What should the customer do to make sure this feature is enabled?
A. Confirm that the aggregates using the FlashCache card are configured appropriately.
B. Set the option to rewarm the FlashCache in both nodes of the HA pair.
C. Verify that the FlashCache card is located in the appropriate slot in the NetApp
controller.
D. Verify that the FlashCache card has been configured only on the node where the feature
is required.
Answer: B
Explanation: The system does not serve data from a Flash Cache or Flash Cache 2
module when a node is shutdown. However, the WAFL external cache preserves the cache
during a graceful shutdown and can serve "warm" data after giveback.
The WAFL external cache can preserve the cache in Flash Cache modules during a
graceful shutdown. It preserves the cache through a process called "cache rewarming,"
which helps to maintain system performance after a graceful shutdown. For example, you
might shut down a system to add hardware or upgrade software.
Cache rewarming is enabled by default if you have a Flash Cache or Flash Cache 2
module installed. Cache rewarming is available when both nodes in an HA pair are running
Data ONTAP 8.1 or later.
https://library.netapp.com/ecmdocs/ECMP1196798/html/GUID-AEB76252-545D-4886ABE9-B91452FDD3AF.html
Q3
Click the Exhibit button.
Referring to the exhibit, how many paths to the LUN will the host see?
A. 32
B. 16
C. 8
D. 4
Answer: C
Q4
A customer enables Storage Efficiency on a volume, intending to use compression only as
data is written. The customer observes that compression is working, but deduplication
processes are still running on a scheduled basis. The customer wants to use compression
without deduplication as the data is written to the volume.
Which action will accomplish this task?
A. Enable post compression on the volume.
D. OnCommand Insight
Answer: A
Q9
A company has a vault relationship between ClusterA and ClusterB. After a month of
operations, the SnapVault update fails. The primary and secondary volumes have been
thin provisioned and are reporting available space. There is connectivity between ClusterA
and ClusterB.
What caused the update failure?
A. The primary volume's aggregate is full.
B. The secondary volume's aggregate is full.
C. A cluster peering relationship was not refreshed every month.
D. There are 251 Snapshot copies on the destination SnapVault.
Answer: D
Q10
A customer requires a solution that will provide site-level and local failover recovery with
support for SMB 3.0.
Which solution accomplishes this requirement?
A. 2-node switchless cluster
B. Fabric MetroCluster
C. Stretch MetroCluster
D. 8-node cluster
Answer: B
Q11
Which command would you use to disable an account in clustered Data ONTAP?
A. security login lock
B. security login policy
C. security login domain-tunnel
D. security login modify
Answer: A
Explanation: Run the following command to disable the diag account for clustered Data
ONTAP:security login lock diag
Reference:
https://kb.netapp.com/support/index?page=content&id=1014665&pmv=print&impressions=f
alse
https://library.netapp.com/ecmdocs/ECMP1366832/html/security/login/lock.html
Q12
A customer wants to use a UTA2 PCIe card in a new FAS8000 system.
Which three steps must be completed before the customer is able to use the ports for Fc
access to an FCP switch? (Choose three.)
A. Use the system hardware unified-connect modify command to change the personality
from initiator to target.
B. Verify the WWPN of the UTA2 so that these can be used in the igroup to map the LUNs
for host access.
C. Verify that the correct SFP+ is installed for FC.
D. Verify the card's hardware configuration by running the system hardware unifiedconnect show command.
E. Verify that Data ONTAP iSCSI, GIFS, and NFS are licensed on the system.
Answer: A,C,D
Reference: https://library.netapp.com/ecmdocs/ECMP1368525/html/GUID-EC0DDAEE1178-48EF-B90D-0A7DF498F71B.html
Q13
A customer creates four broadcast domains with the following ports included for node cl-01:
bcast1 - e0c
bcast2 - e0d
bcast3 - e0e
bcast4 - e0f
A customer creates a LIF and specifies a home port of cl-01:e0f. After LIF creation, the
administrator modifies the home port to use cl-01:e0c.
Which broadcast domain is the LIF using now?
A. bcast4
B. bcast2
C. bcast1
D. bcast3
Answer: C
Q14
A NetApp cluster is connected to two network switches for resiliency. One of the network
switches loses power. Most LIFs on the cluster automatically recover from the switch failure
to and are reachable through the network. One LIF used for CIFS access is not reachable
through the network until power is restored to the failed switch.
Which two areas should be investigated to determine the problem? (Choose two.)
A. The protocols allowed on the LIFs.
B. The LIFs failover-group configuration.
C. The LIFs home port.
D. The broadcast domain's member ports.
Answer: B,D
Q15
A customer has two SVMs joined to separate Active Directory domains. SVM1 is joined to
domain AD1 and SVM2 is joined to domain AD2. The administrator enables Active
Directory access to allow certain domain users access to the cluster using their Active
Directory credentials. After enabling, some users report the inability to log into the cluster
using their Active Directory credentials.
What are three reasons this happened? (Choose three.)
A. The user account belongs to the domain that is not used for cluster access
authentication.
B. The cluster time is off by two minutes from the Active Directory time server.
C. The authentication tunnel was deleted and access sessions were disconnected.
D. The Active Directory user account is not added to the cluster as a user.
E. The user is not a member of an Active Directory group that is allowed access to the
cluster.
Answer: A,D,E
Q16
What will the storage aggregate create -aggregate aggr0_rg0 -diskcount 40 -maxraidsize
20 -nodes cl-01 -disktype SAS command do?
A. It creates a new aggregate named aggr0_rg0 with two RAID-DP RAID groups of 20 SAS
drives on cl-01.
B. It creates a new aggregate named aggr0_rg0 with one RAID-DP RAID group of 40 SAS
drives on cl-01.
C. It creates a new aggregate named aggr0_rg0 with two RAID4 RAID groups of 20 SAS
drives on cl-01.
D. It creates a new aggregate named aggr0_rg0 with two RAID4 RAID groups of 20 SAS
drives on cl-02.
Answer: A
Q17
When you use the volume snapshot autodelete command, what are three values for the
commitment parameter? (Choose three.)
A. disrupt
B. volume
C. snap-reserve
D. try
E. destroy
Answer: A,D,E
Explanation:
https://library.netapp.com/ecmdocs/ECMP12452955/html/volume/snapshot/autodelete/mod
ify.html
Q18
You have a 4-node cluster serving home directories over two IPs per node.
Which two methods would you use to set up DNS load balancing over a single name to the
eight IP addresses? (Choose two.)
A. On-Box DNS using a DNS delegation record
B. Off-Box Round Robin DNS
C. On-Node PTR records with reverse lookup per node
D. Off-Node CNAME records for each node management interface
Answer: A,B
Reference: https://kb.netapp.com/support/index?page=content&id=1013801
Q19
Which NetApp management tool generates reports on volume storage capacity trending
information?
A. Virtual Storage Console
B. OnCommand Unified Manager
C. OnCommand System Manager
D. OnCommand Workflow Automation
Answer: B
Q20
When assigning shelf IDs to SAS-connected shelves, which statement is true?
A. They only need to be unique within an HA pair.
B. They only need to be unique within a stack.
C. They only need to be unique within a node.
D. They need to be unique within a cluster.
Answer: A
Explanation: IDs must be unique within an HA pair.
Reference: https://library.netapp.com/ecmdocs/ECMP1256807/html/GUID-FF56A1A7F2ED-4F3D-BC2A-366609422B4D.html
Q21
When using SnapRestore, which two statements are true? (Choose two.)
A. A single file can be restored.
B. Performing a volume level restore from a Snapshot copy may delete other Snapshots.
C. Individual LUNs cannot be restored.
D. Before restoring a volume it must be taken offline.
Answer: A,B
Q22
A customer has a 1000 GB volume that is at 25% capacity and has no existing Snapshot
copies. The customer creates a Snapshot copy of the volume, creates a new 250 GB file,
and deletes an existing 100 GB file.
How much space is free in the volume?
A. 350 GB
B. 400 GB
C. 500 GB
D. 600 GB
Answer: C
Q23
An administrator creates an account for a new user, and wants this user to have limited
capabilities accessing SSH. The administrator defined the account, but the user still has full
control.
Which two settings would the administrator use to correct this problem? (Choose two.)
A. the user account settings in OnCommand system Manager
B. the user account settings of the admin account
C. the user account settings in Windows Active Directory Users and Computers
D. the user account settings in the clustershell
Answer: A,D
Q24
Which port is used for untagged VLAN traffic?
A. a0a-0
B. a0a
C. e0a-999
D. 0a
Answer: B
Explanation:
The second character is a numeral 0-999 identifying the slot in which the port adapter is
located.
https://library.netapp.com/ecm/ecm_download_file/ECMP1636021
Q25
A customer enables Flash Pool with SSD storage pools for an HA pair using a single SSD
hot spare. The client has assigned aggregates from only cl-01 to Flash Pool storage pool.
One of the SSDs in the storage pool fails and the customer observes that the SSd hot
spare did not take the place of the failed drive.
Why did this happen?
A. The SSD hot spare is owned by cl-02.
B. cl-01 contains an SSD aggregate.
C. The minimum spare count option is set to 0.
D. The SSD storage pool already contained the maximum number of disks.
Answer: A
Reference: https://library.netapp.com/ecm/ecm_download_file/ECMP1636022
Q26
In the storage failover command, what does the bypass-optimization option do?
A. It takes over the partner node without performing aggregate relocation.
B. It migrates all logical interfaces during takeover.
C. It takes over without migrating all logical interfaces.
D. It takes over the partner node performing aggregate relocation.
Answer: A
Explanation:
Take over the partner node without performing aggregate relocation
storage failover takeover -bypass-optimization true
Reference: https://library.netapp.com/ecmdocs/ECMP1367947/html/GUID-4B814447521D-43B7-846D-AB4EF86A25A1.html
Q27
An administrator enabled the iSCSI protocol on an SVM and created a LUN for a Windows
2012 server. When the administrator uses Windows Disk Management, the LUN cannot be
found.
Which two statements describe how to solve this problem? (Choose two.)
A. Create an igroup and add the iSCSI IQN and then map it to the LUN.
B. Configure the iSCSI service on the Windows 2012 server.
C. Disable the ALUA support for the igroup that is mapped to the LUN.
D. Create an igroup and add the WWPN and then map it to the LUN.
Answer: A,B
Q28
A user is reporting trouble using a SVM management LIF. You have verified host
configuration, network connectivity, and that the LIF responds to pings.
What should you do to continue troubleshooting this problem?
A. Ensure the SVM management LIF's failover policy is correct.
B. Ensure the SVM management LIF's administrative status is up.
C. Ensure the SVM management LIF is on its home port.
D. Ensure the SVM management LIF's firewall policy is set to management.
Answer: A
Explanation: Explanation: You must have prepared the SVM networking for a major
upgrade by creating the necessary SVM management LIFs, failover groups, and routes.
Reference:https://library.netapp.com/ecmdocs/ECMP1636041/html/GUID-5B0E96CF78F8-40B9-A62D-C5A6E62A53D7.html
Q29
During a storage failover you run the storage failover show-takeover command and it
displays the messages "relocating its SFO aggregate" and "CFO aggregates not
attempted".
How would you relocate the CFO aggregate?
A. Wait for the failed controller to come online and takeover the aggregate.
B. Wait for the CFO aggregate to show "done" once the SFO is complete.
C. Put the CFO aggregate online to force the data aggregate to come online.
D. Force giveback of the failed controller to force that data aggregate to come online.
Answer: B
Q30
A customer wants to improve write performance on their FAS2552 HA system. The system
is built with SAS drives, and they are not interested in purchasing additional disk shelves.
The workload consists of mostly small, random overwrites and random reads.
What should the customer do to improve performance?
A. Enable free space reallocation on the aggregate.
B. Enable FlashCache on both nodes.
C. Increase the amount of NVRAM in the system.
D. Assign a Flash Pool RAID group to the aggregates.
Answer: D
Explanation: A Flash Pool is built from a Data ONTAP aggregate in a two-step process,
described in section 3,1, "7-Mode CLI." Essentially it is the addition of SSDs into an
aggregate to provide a high-bandwidth, low-latency location that is capable of caching
random reads and random overwrites.
http://community.netapp.com/fukiw75442/attachments/fukiw75442/data-ontapdiscussions/17208/1/43347_TR4070_NetApp_Flash_Pool_Design_and_Implementation_Guide.pdf
Q31
Which data protocol is available to use on an SVM?
A. FTP
B. CIFS
C. HTTP
D. TFTP
Answer: B
Explanation: You can configure CIFS and NFS protocols on the Storage Virtual Machine
(SVM) to provide file-level data access for NAS clients. To enable CIFS protocol, you must
create the data LIFs and the CIFS server. To enable NFS protocol, you can specify the NIS
details in addition to the data LIFs.
Reference:https://library.netapp.com/ecmdocs/ECMP1354558/html/GUID-75523E3A-839A4530-919D-29F98AB6C2E7.html
Q32
A customer wants different performance characteristics for applications that are using
LUNs. They want to control the performance for FCP LUNs.
Which two clustered Data ONTAP features foQoS would you use to accomplish this task?
(Choose two.)
A. setting the policy group for the SVM that is hosting the LUNs for the customer's
application
B. setting the policy group for the volumes that are hosting the LUNs for the customer's
applications
C. setting the policy group for the FCP target ports that are being used for the LUNs
D. setting the policy group for the igroups mapped to the LUNs that are hosting the
customer's applications
Answer: A,B
Q33
Which statement describes a MetroCluster environment in clustered Data ONTAP?
A. A single cluster at each site interconnected using FC switches and Ethernet switches.
B. A single cluster at each site interconnected using FC switches only.
C. A single HA pair cabled across sites using FC switches.
D. A single HA pair stretched across sites using extended cables.
Answer: B
Explanation:
http://www.unitis.hu/downloads/MetroClusterContinuousAvailabilitySEPresentation_.pdf
Q34
A customer cannot enable storage failover. You have verified that the cabling is correct, the
HA partners can communicate with each other, and cluster HA is configured.
What must you do to resolve the problem?
A. Set the HA state in the maintenance boot menu.
B. Select option 4 in the boot menu.
C. Set switchless cluster in privilege advanced mode.
D. Modify epsilon in privilege advanced mode.
Answer: D
Q35
Which two NFS versions are supported on clustered Data ONTAP 8.3? (Choose two.)
A. NFSv1
B. NFSv2
C. NFSv3
D. NFSv4
Answer: C,D
Explanation: Configure clustered Data ONTAP 8.3 for NFSv3, NFSv4, and NFSv4.1,
including parallel NFS (pNFS)
Q36
What is the default privileged account used to manage a clustered Data ONTAP storage
system?
A. administrator
B. root
C. admin
D. pseudo root
Answer: C
Explanation: Explanation: The default cluster account admin an alternative administrative
user account username
Reference: https://library.netapp.com/ecm/ecm_download_file/ECMP1196798
Q37
An administrator is working with an application group to resolve a performance problem
within the environment. They are experiencing slow read speeds and are trying to
determine what could be done to improve performance.
What would you add to the system to improve performance?
A. NVRAM
B. FlashCache
C. RAM
D. processors
Answer: B
Reference: https://technet.microsoft.com/en-us/library/cc720418(v=ws.10).aspx
Q38
An administrator enabled the iSCSI protocol on an SVM and created a LUN for a Windows
2012 server. When the administrator uses Windows Disk Management, the LUN cannot be
found.
What are two solutions for this problem? (Choose two.)
A. Set up the Windows 2012 server to serve as an iSCSI target for the LUN.
B. Define the iSCSI Send Targets in the igroup and map to the LUN.
C. Define the iSCSI IQN in the igroup and map to the LUN.
D. Start the iSCSI service on the Windows 2012 server.
Answer: C,D
Q39
Which statement is true about establishing a SnapMirror relationship in clustered data
ONTAP?
A. It sets up the relationship, but does not start the initial transfer
B. It sets up the relationship on the source node only
C. It sets up the relationship and starts the initial data transfer
D. It sets up the relationship and creates the destination volume
Answer: A
Explanation:
3rd bullet
https://library.netapp.com/ecmdocs/ECMP1196874/html/GUID-2B7FC913-4B02-43C9-
865AFB7D44ADB40F.html
Q40
Which LIF parameter determines the ports that the LIF moves to when the current interface
goes offline?
A. auto-revert
B. ipspace
C. failover-group
D. netmask
Answer: C
Explanation: You can revert a LIF to its home port after it fails over or is migrated to a
different port either manually or automatically. If the home port of a particular LIF is
unavailable, the LIF remains at its current port and is not reverted.
https://library.netapp.com/ecmdocs/ECMP1196907/html/GUID-C97B53E9-7A57-443095F5-37DF76D8190E.html
https://kb.netapp.com/support/index?page=content&id=1013689&pmv=print&impressions=f
alse
Q41
Which type of upgrade is supported from a single-node FAS2552 to a dual-node cluster
with clustered Data ONTAP 8.3 when all 10 GB ports are used for host access?
A. a disruptive upgrade from a single-node cluster to a dual-node HA cluster
B. a non-disruptive upgrade of a single-node cluster into a dual-node HA cluster
C. a single-node cluster upgraded by migration of data to another single-node cluster
D. a disruptive single-node cluster upgraded to a dual-node HA cluster by adding 10 Gb
Ethernet cards
Answer: D
Q42
A customer's Linux Oracle database requires a SAN solution with multiple FC connections
for path resiliency and performance. The host has been provisioned with two dual-port FC
HBAs, and each HBA is connected to each fabric.
Before configuring the storage, what host information should the storage administrator
obtain from the customer? (Choose two.)
A. if the FC HBAs ports are all configured for an active/passive configuration.
B. the amount of cache memory installed in the host
C. if the DM-MP with ALUA support is configured on the host
D. the WWPNs of all the FC ports in the host
Answer: C,D
Q43
A customer has an aggregate, aggr1_01 with three RAID groups: rg0, rg1, and rg2. Each
RAID group has 15 disks, and the aggregate's maximum RAID group size is set to 18
disks. The customer adds three additional disks to the aggregate using the following
command:
storage aggregate add-disks -aggregate aggr1_01 -diskcount 3
How are the RAID groups affected by this command?
A. The disks are added to a new RAID group rg3.
B. Each RAID group receives one additional disk.
C. The three disks are added to RAID group rg2.
D. The three disks are added to RAID group rg0.
Answer: C
Q44
What is the maximum size of a compression group?
A. 8 KB
B. 4 KB
C. 32 KB
D. 64 KB
Answer: C
Q45
You have an aggregate with 10 TB free. You create a 1 TB volume with space-guarantee
set to none. In that volume, you create a 500 GB LUN with space-reserve enabled.
How much space is available in the aggregate before data is written to the LUN?
A. 10 TB
B. 9.5 TB
C. 8.5 TB
D. 9 TB
Answer: B
Q46
A customer has configured SnapDrive for Windows to assist in creating Snapshot copies of
a LUN. In SnapDrive, the transport protocol configuration uses the vsadminuser account for
authentication. SnapDrive fails to connect to the SVM.
Why did this failure occur?
A. Transport protocol requires a domain Windows account.
B. The vsadmin account is locked or does not have a password.
C. SnapDrive requires a cluster-wide privileged account.
D. Transport protocol requires a local Windows account.
Answer: B
Q47
You create a 1000 GB volume with space-guarantee set to none and fractional-reserve set
Which three Storage Efficiency features should be turned on to meet these needs?
(Choose three.)
A. deduplication
B. post compression
C. storage QoS
D. inline compression
E. SyncMirror
Answer: A,B,D
Explanation: http://community.netapp.com/t5/Tech-OnTap-Articles/Storage-Efficiency-inClustered-Data-ONTAP/ta-p/86822
http://www.netapp.com/us/products/platform-os/data-ontap-8/data-efficiency-features.aspx
https://library.netapp.com/ecm/ecm_get_file/ECMP1141092
Q51
Which type of connectivity is supported when connecting third-party arrays through
FlexArray Virtualization for back-end storage to a NetApp cluster?
A. iSCSI
B. SAS
C. FC
D. Infiniband
Answer: C
Reference: On the back end, FlexArray attaches to your existing storage arrays via Fibre
Channel and provides a virtualization layer between the storage array and the hosts
Q52
Your company just purchased four additional FAS8060 nodes to add to an existing 12-node
NAS cluster made up of FAS6290s.
After joining the four new nodes, how many more nodes are allowed before you reach the
maximum supported configuration for a mixed FAS6290/8060 cluster?
A. 8
B. 2
C. 4
D. 16
Answer: A
Reference: http://www.netapp.com/us/products/storage-systems/fas8000/fas8000-techspecs.aspx
Q53
You acquired a new company that has the same private IP address range.
What must be set up on the NetApp cluster to support the duplicate networks?
A. VLANs
B. failover groups
C. IPspaces
D. DNS zone
Answer: C
Q54
At which two levels would you be able to create a SnapMirror policy? (Choose two.)
A. aggregate
B. cluster
C. volume
D. SVM
Answer: A,C
Reference: https://library.netapp.com/ecmdocs/ECMP1610202/html/snapmirror/create.html
Q55
AutoSupport recently stopped working. No changes were made on the cluster itself.
Which three factors outside of the cluster would cause the failure? (Choose three.)
A. changes to DNS
B. changes to the firewall
C. changes to the Active Directory service account
D. changes to your NetApp support user ID
E. changes to the proxy server
Answer: A,B,E
Q56
An administrator is attempting to add two FAS8020 nodes to an existing cluster of eight
FAS2552 nodes. They are receiving an error when attempting to join the new nodes.
What is causing this error?
A. The cluster switch connections have been cabled incorrectly.
B. The disk shelves on one of the new nodes are displaying an error.
C. The maximum number of nodes is already in the cluster.
D. The new nodes are running a newer version of clustered Data ONTAP.
Answer: C
Q57
You just added a vSphere host to your environment that needs access to the existing NFS
datasrtore. The applicable export policy is named VMW, and each host's IP address has
been given access.
What should you do to grant the new host access to the NFS datastore?
A. Create a new volume.
B. Create a new rule under the VMW export policy.
C. Create a new SVM.
C. The failover group does not have the proper targets defined.
D. The current port is already hosting a LIF.
Answer: C
Q65
What are two FPolicy methods for applications? (Choose two.)
A. asynchronous
B. semi-synchronous
C. direct
D. synchronous
Answer: A,D
Reference: https://library.netapp.com/ecmdocs/ECMP1196891/html/GUID-CFED10C9311A-444C-8684-D7BBAF0BFADC.html
Q66
What must be configured to support inter-cluster Snapmirror relationships?
A. Cluster peer relationship
B. Intercluster port role
C. Junction path for the mirrored volume
D. Minimum transfer size
Answer: A
Q67
You have created a storage virtual machine named SVM1 with a NetBIOS name of FILES1
and you have successfully joined the Active Directory domain. You have created a CIFS
share called SHARE1 and have given read/write access to all users. Network connectivity
has been verified.
To which path should the users be mapping?
A. \\SHARE1\FILES1
B. \\FILES1\SHARE1
C. \\SVM1\FILES1
D. \\FILES1\SVM1
Answer: B
Q68
Which two backup engines are supported within clustered Data ONTAP? (Choose two.)
A. SMT ape
B. dump
C. tape
D. xcopy
Answer: A,B
Reference: https://library.netapp.com/ecm/ecm_download_file/ECMP1196874
Q69
What is true about a node root volume?
A. There is a root volume on every node in a cluster.
B. It is the root of a data SVM's namespace.
C. You can use vol move to move it to an aggregate on a different node.
D. It is the most secure place to store critical user data.
Answer: B
Reference: https://library.netapp.com/ecmdocs/ECMP1196798/html/GUID-A60F4F830034-4DB8-838B-06E9D4BEF9A4.html
Q70
While reviewing a controller, you find that an aggregate aggr1 made of 6 TB hard-disk
drives has two RAID groups, one with 14 disks and the other with eight disks.
Which action caused the RAID groups to be different?
A. The aggregate was created with the RAID group option set to 2.
B. The aggregate was created with advanced drive partitioning.
C. The aggregate was moved from one controller to its partner.
D. The aggregate was created from the command line using the default configuration.
Answer: D
Q71
In clustered Data ONTAP 8.2, which of the following commands will restore an entire
volume
A. volume snapshot promote
B. volume snapshot restore
C. volume snapshot resync
D. None of the above, just use the .snapshot or ~snapshot directory to restore the entire
volume
Answer: B
Q72
A customer has lost access to shares being used by an application.
What are three troubleshooting steps the administrator should take? (Choose three.)
A. Verify that the admin SVM is running on the node being accessed by the customer.
B. Verify that the LIF resides on its home port.
C. Verify that the LIFs in the SVM are all up and active.
D. Verify that the SVM has CIFS running, that the share exists, and is online.
E. Verify that there is network connectivity between the SMB client and the SVM.
Answer: C,D,E
Q73
You set up a SnapMirror relationship between two clusters and start the SnapMirror
initialization. The transfer starts without error and begins replicating data. Before the
initialization completes, a network failure occurs and the transfer fails to finish. Once the
network failure is corrected, you attempt to initialize the transfer again, but receive the
following error:
Volume rep_vol01 is restricted
Which step should you perform before attempting re-initialization?
A. Change the state of the destination volume to online.
B. Delete all Snapshot copies on the destination volume.
C. Change the state of the destination volume to offline.
D. Delete all data in the destination volume.
Answer: A
Q74
A customer wants the best performance for their Oracle DB solution. They are willing to
configure their high-availability nodes so the load is less than 50% per node, to protect
performance during failover. They want to enhance read and write performance.
Which NetApp technology accomplishes this task?
A. deduplication
B. thin provisioning
C. Flash Pool
D. FlashCache
Answer: C
Q75
Node cl-02 needs to fail over for scheduled maintenance. The node has NAS LIFs on it.
The failover needs to be non-disruptive to the NAS clients.
Which command accomplishes this task?
A. system node halt -ofnode cl - 02 -inhibit true
B. system node reboot -ofnode cl - 02 -inhibit-takeover true
C. storage failover takeover -ofnode cl - 02 -bypass -optimization true
D. storage failover takeover -ofnode cl - 02
Answer: D
Q76
Which three disk shelf types are supported in clustered Data ONTAP 8.3? (Choose three.)
A. DS4486
B. DS14-MK4-FC
C. DS14-MK2-FC
D. DS14-MK2-AT
E. DS14
Answer: A,B,D
Explanation:
Disk shelves supported
DS2246 (2U; 24 drives, 2.5" SFF) DS4246 (4U; 24 drives, 3.5" LFF) DS4486 (4U; 48
drives, 3.5" LFF) DS4243 (4U; 24 drives, 3.5" LFF) supported for upgrades only DS14 disk
shelves (mk2-AT, mk4) are supported for upgrades only
Reference:http://www.netapp.com/us/products/storage-systems/fas8000/fas8000-techspecs.aspx(See the table)
Q77
Which hidden directory points to a Snapshot copy from an SMB client?
A. /snapshot
B. .snapshot
C. snapshot
D. %snapshot
Answer: C
Explanation: hidden ~snapshot directory is accessible
Reference: https://library.netapp.com/ecmdocs/ECMP1196891/html/GUID-6D8328091E60-4041-BF08-D390CB6B3D89.html
The method that you use to access the ~snapshot directory from Windows clients using
SMB
https://library.netapp.com/ecmdocs/ECMP1196891/html/GUID-6D832809-1E60-4041BF08-D390CB6B3D89.html
Q78
What is the speed of the cluster interconnect ports on a FAS2552?
A. 10 Gb
B. 1 Gb
C. 8 Gb
D. 16 Gb
Answer: A
Q79
Why would you use NetApp Snapshots?
A. for data protection
B. to increase performance
C. for network resiliency
D. for storage failover
Answer: A
Reference: http://www.netapp.com/us/products/platform-os/snapshot.aspx
Q80
Your company is told that it must follow strict requirements for auditing purposes when
creating user accounts for each department.
Which feature in clustered Data ONTAP accomplishes this task?
A. LDAP integration
B. workgroup access
C. role-based access control
D. mixed-mode security
Answer: C
Q81
How many disks reside in a DS4246 shelf?
A. 46
B. 42
C. 14
D. 24
Answer: D
: http://www.netapp.com/uk/products/storage-systems/disk-shelves-and-storagemedia/disk-shelves-tech-specs.aspx(See the Table).
Q82
A customer wants to use jumbo frames on an interface group called a0a. Interface group
a0a contains ports e0c and e0d. Additionally, the customer is using VLAN tagging for
VLANs 510 and 520. VLAN 510 will use jumbo frames but VLAN 520 will not. When the
customer tries to enable jumbo frames on a0a-510 the command fails.
What caused the failure?
A. The MTU size must be set on the broadcast domain to which the ports belong.
B. The LIF corresponding with VLAN 510 is not configured for jumbo frames.
C. Ports e0c and e0d have conflicting MTU sizes configured.
D. Jumbo frames must be enabled from the advanced privilege set.
Answer: A
Q83
Which hidden directory points to a Snapshot copy from a NFS client?
A. %snapshot
B. .snap
C. .snapshot
D. /snapshot
Answer: C
Explanation: This command rename the hidden .snapshot directory in every directory in
the current volume.
Reference:https://support.f5.com/kb/en-us/products/arx/manuals/product/arx-climaintenance-6-3-0/snapshot.html
Q84
Which two default SVM roles are available when an SVM is created? (Choose two.)
A. vsadmin-readonly
B. root
C. vsadmin
D. admin
Answer: A,C
Reference: https://library.netapp.com/ecmdocs/ECMP1368701/html/GUID-FFE11F8C490B-4D6D-A18E-3488275029C7.html(See the table 1st point and last point).
Q85
What is the maximum number of nodes allowed in an FAS8000 series with a SAN
configuration?
A. 24
B. 8
C. 4
D. 2
Answer: B
Explanation: SAN: Up to 8 cluster nodes
Reference: http://cloudcarib.com/pdf/NetApp-8000.pdf
Q86
A customer wants to retire a broadcast domain called bcast1 from the cluster. All network
ports and data LIFs previously using bcast1 have been moved to another broadcast
domain. When the administrator attempts to delete the broadcast domain, the deletion fails.
What is causing the problem?
A. TheIPspace, that the broadcast domain uses, still exists.
B. The cluster ports are using the bcast1 broadcast domain.
C. There are still subnets associated with the broadcast domain.
D. The SVM has not been deleted.
Answer: A
Q87
Which two solutions are valid for clustered Data ONTAP MetroCluster? (Choose two.)
A. FAS3200 series controllers
B. FAS2500 series controller
C. four nodes at each site
D. two nodes at each site
Answer: A,D
Q88
You notice your indirect I/O performance between nodes in your 4-node cluster is slowing
down from prior week. Each node has two 10 GB connections to the cluster interconnect,
one to each switch. You are using four out of 12 available ports on each cluster
interconnect switch. Your cluster network utilization is over 80%.
What should you do to increase cluster interconnect performance?
A. Change the SFP+ from 10 Gb to 16 Gb on each node and switch.
B. Add two more cluster interconnect connections per node.
C. Add additional ISLs between the two cluster interconnect switches.
D. Change the cable from TwinAx to optical with SFP+ for better throughput.
Answer: B
Q89
You change the volume junction-path of vol1 from /vol/vol1 to /vol1. NFS clients are unable
to connect to the new path/vol1.
Which mirrors need to be updated to solve this problem?
A. TDP mirrors of the SVM root volume.
B. XDP mirrors of the SVM root volume
C. DP mirrors of the SVM root volume
D. LS mirrors of the SVM root volume
Answer: D
Q90
The cluster ha modify -configured true command will trigger which two actions? (Choose
two.)
A. The ability for the nodes in an HA pair to execute an auto-giveback.
B. The ability for the hosts connected to a node to failover to another HA pair.
C. The storage can failover from one node to the other.
D. SVM failover from any node in the cluster to any other node.
Answer: B,C
Q91
What is a NetApp storage system Ethernet port name?
A. e0/1
B. g0/1
C. e0a
D. eth0
Answer: C
Reference: http://community.netapp.com/t5/OnCommand-Storage-Management-SoftwareDiscussions/e0M-Management-SP-Port/td-p/18499
Q92
You have two LIFs homed on the same single-mode interface group. You want to leverage
Answer: C
Q96
You have a cluster with a node running root data partitioning and need to grow the
aggregate for additional data volumes.
What is NetApp's best practice for increasing the aggregate size to optimize performance?
A. Add 16 disks to the aggregate.
B. Create a new aggregate and migrate all data with vol move.
C. Add two disks to an existing RAID group.
D. Add a complete RAID group at a time.
Answer: D
Explanation: best practices when you add storage to an aggregate optimizes aggregate
performance:
Add a complete RAID group at a time.
Reference:https://library.netapp.com/ecmdocs/ECMP1368859/html/GUID-93C8D102-966646AF-8350-03EFF8A6A68B.html
Q97
You have multiple volumes that are exported to a group of hosts within your environment. A
new host needs access to the volumes.
Which two actions accomplish this task? (Choose two.)
A. Mount the new exports from the host.
B. Create a new SVM.
C. Create a rule in the export policy on the SVM.
D. Create a new data LIF on the SVM.
Answer: A,C
Q98
What are the two valid settings for fractional reserve? (Choose two.)
A. 100%
B. 20%
C. 0%
D. 50%
Answer: A,C
Explanation: The fractional reserve setting is expressed as a percentage; the only valid
values are 0 and 100 percent. You use the vol options command to set fractional reserve.
Reference: https://library.netapp.com/ecmdocs/ECMP1368845/html/GUID-596042AF8E9C-4187-969C-633DFDD5A936.html
Q99
Clustered Data ONTAP supports which three versions of NFS? (Choose three.)
A. NFSv4.1
B. NFSv4
C. NFSv3
D. NFSv2
E. NFSv1
Answer: B,C,D
Explanation: https://library.netapp.com/ecmdocs/ECMP1196993/html/GUID-CC5F1AA41708-4E4F-86AE-E6EFB9612174.html
https://library.netapp.com/ecmdocs/ECMP1196993/html/GUID-FAB742F2-0F26-493FA315-5DD1FBB692F4.html
Q100
Which two methods would be used to change root-data partitioning on an FAS2500?
(Choose two.)
A. OnCommand System Manager
B. command line interface
C. System Setup
D. OnCommand Unified Manager
Answer: B,C
Explanation: https://library.netapp.com/ecmdocs/ECMP1636022/html/GUID-91D088A5DE0E-42CD-9613-58789AF879AF.html
Topic 2, Volume B
Q101
What type of configuration is required for SnapVault backup between clusters in two
different clustered Data ONTAP or later systems?
A. Vserver Peer Configuration
B. SnapVault Peer Configuration
C. Backup Peer Configuration
D. Cluster Peer Configuration
Answer: D
Q102
With clustered Data ONTAP 8.2 or later, an administrator may use NDMP commands at
which two levels? (Choose Two)
A. Node
B. Cluster
C. Intercluster
D. Vserver
Answer: A,D
Q103
What CLI command restores entire volume from a snapshot copy:
Answer: C,D
Q107
What are the characteristics of Snapmirror? (choose three)
A. Provides data protection for disaster recovery
B. If the source FlexVol volume is lost, clients can restore data from the secondary to
primary storage
C. Can asynchronously copy the source FlexVol volume to a disaster recovery replica
D. If the source FlexVol volume is lost or destroyed, clients can connect to the mirror image
of the source data
Answer: A,C,D
Q108
Which statement is true when a two node switchless cluster is grown to a four-node
cluster?
A. The new HA-pair connected to two new cluster switches and the existing two-node
cluster will connect one path at a time to the new cluster switches.
B. There is a short outage while the new HA pair and existing two node cluster add
additional NVRAM cards for cluster connections.
C. The new HA pair is direct-attached to the existing two-node cluster-free 10 GbE ports
without adding switches.
D. The new HA pair is connected to four new cluster switches and the existing two-node
cluster will connect one path at a time to the new cluster switches.
Answer: A
Q109
Which of the following are appropriate client specification for an export rule? (Choose all
that apply)
A. 0.0.0.0/0
B. 192.168.5.0/24
C. .eng.netapp.com
D. \\vs_root\192.168.153.128
Answer: A,B,C
Q110
Which of these correctly describes single-node clusters?
A. They support storage failover
B. They support nondistruptive upgrade
C. They have no cluster LIFs
D. They are identical to one-node clusters
Answer: C
Q111
B. Join Cluster
C. Install second node
D. Enable HA
Answer: A
Explanation:
Setting up the cluster involves creating the cluster on the first node, joining any remaining
nodes to the cluster, and configuring a number of features--such as synchronizing the
system time--that enable the cluster to operate nondisruptively.
The cluster setup command runs the cluster setup wizard, which can be used to either
create a cluster or join a node to an existing cluster. When you run the cluster setup wizard,
enter the appropriate information at the prompts. You will be asked to provide the following
information to create a cluster:
Cluster name
Cluster base license key
Feature license keys
Cluster administrator's password
Cluster management interface port, IP address, netmask, default gateway
Node management interface port, IP address, netmask, default gateway
DNS domain names
Name server IP addresses
Location
You will be asked to provide the following information to join a cluster:
Cluster name
Node management interface port, IP address, netmask, default gateway
Link: https://library.netapp.com/ecmdocs/ECMP1196817/html/cluster/setup.html
Q116
Which two devices support the NetApp Remote Support Agent (RSA)?
A. SP
B. RTC
C. RLM
D. ILO
E. BMC
Answer: A,C
Explanation: Explanation/Reference:
https://library.netapp.com/ecm/ecm_download_file/ECMP1200041 (page 9)
Q117
A data Vserver can contain which three elements? (Choose three.)
A. Aggregates
B. Data LIF
C. NAS volumes
D. Other Vservers
E. Ports
F. SAN LUNs
G. A Vfiler
Answer: B,E,F
Q118
What are four storage efficiency features Data ONTAP 8.1 Cluster-Mode provides?
(Choose four.)
A. transparent files
B. thin provisioning
C. SnapVault
D. FlexClone
E. deduplication
F. compression
Answer: B,D,E,F
Q119
Which statement is true about a SnapMirror destination vserver?
A. It must have a read-only Vserver root volume.
B. It must be in the same cluster as the source Vserver
C. It must be created with the same language type as the source Vserver.
D. It must have a different storage efficiency policy than the source Vserver.
Answer: C
Explanation:
Training material: Clustered_Data_ONTAP_82_Data_Protection_Guide
How volume SnapMirror works with deduplication You can use volume SnapMirror to
replicate a deduplicated volume regardless of size of the volume and logical data in the
volume.
When using volume SnapMirror with deduplication, you must consider the following
information:
You can enable deduplication on the source system, the destination system, or both
systems.
The shared blocks are transferred only once. Therefore, deduplication also reduces the use
of network bandwidth. When the volume SnapMirror relationship is broken, the default
deduplication schedule is applied at the destination storage system.
When configuring volume SnapMirror and deduplication, you should coordinate the
deduplication scheduleand the volume SnapMirror schedule. You should start volume
SnapMirror transfers of a deduplicated volume after the deduplication operation is
complete. This schedule prevents the sending of undeduplicated data and additional
temporary metadata files over the network. If the temporary metadata files in the source
volume are locked in Snapshot copies, these files consume extra space in the source and
destination volumes.
Q120
What happens if a load Sharing (LS) mirror replies a Vserver root volume to any node in
the cluster and you promote one of the mirror destinations?
A. All clients temporarily gain read/write access to the root volume
B. The original source volume is prevented from becoming stale.
C. All clients must re mount.
D. There is no disruption for any connected clients.
Answer: A
Q121
A. When replacing a controller for a RMA the key is automatically updated to the serial
number of new controller.
B. When replacing a controller for a RMA, a new key is needed but the existing key will
work for 90 days.
C. A new clustered Data ONTAP 8.2 installation can use both 8.1 keys and 7-Mode keys.
D. Replacing a NVRAM card in a controller will NOT require new license keys for that
mode.
Answer: B
Explanation: Explanation/Reference:
If you replace or upgrade a controller that is running Data ONTAP 8.2, within a grace
period (up to 90 days) the new controller can use the same licensed functionality that the
original controller had
Q126
What communication link is necessary in order to establish cluster peer relations between
two clusters?
A. The cluster interface on each node must be able to communicate with the intracluster
interface on each node in the peer cluster.
B. The cluster interface on each node must be able to communicate with the node-mgmt
interface on each node in the peer cluster
C. The intracluster interface on each node must be able to communicate with the
intracluster interface on each node in the peer cluster.
D. The intercluster interface on each node must be able to communicate with the
intercluster interface on each node in the peer cluster.
Answer: D
Q127
Which two Data ONTAP Cluster-Mode clone technologies will lock a Snapshot copy?
(Choose two.)
A. FlexClone
B. LUN Clone
C. Snap Clone
D. Vol Clone
E. Aggr Clone
Answer: A,B
Q128
With clustered Data ONTAP 8.2 or later, which SAN component will no longer be
supported?
A. Windows Server 2012
B. vSphere 5.1
C. Veritas DMP
D. Red Hat Enterprise Linux 6.2
E. AIX 7.1
Answer: C
Q129
When a pNFS client is connected on a LIF on node 1 of a 4-node clustered Data ONTAP
pNFS 4.1 vServer, and node 2 performs a storage takeover (SFO) of node 1, and LIFs fail
over to node 3, which statement is true?
A. This mount goes stale.
B. The client waits for node 1 to come back up.
C. The pNFS redirects access to a LIF on node 2.
D. The client accesses the virtual IP of the cluster which handles access to the data during
the failure.
Answer: C
Explanation:
http://www.redbooks.ibm.com/redpieces/pdfs/sg248200.pdf
Q130
What must be configured to support cross-cluster SnapMirror relationships?
A. cluster peer relationship
B. intracluster port
C. junction path
D. minimum transfer size
Answer: A
Q131
The VLDB is out-of-quorum on the node serving as the master of the VLDB ring. Which
four statements are true? (Choose four.)
A. A new VLDB ring master is elected.
B. Clients can write to volumes on that node.
C. Volumes cannot be moved to or from that node.
D. Clients can read from volumes hosted on that node.
E. New volumes can be created on aggregates hosted on that node.
Answer: A,B,C,D
Q132
What are the LIF roles that can be assigned to ports in Data ONTAP Cluster-Mode?
(Choose all that apply)
A. Data
B. Cluster management
C. Cluster
D. Node management
E. Intercluster
Answer: A,B,C,D,E
Q133
With Data ONTAP 8.1, which statement is true about deduplication and volume sizes?
A. FlexClone
B. LUN Clone
C. Snap Clone
D. Vol Clone
E. Aggr Clone
Answer: B
Explanation/Reference:
FlexClone LUN is also a method.
It could be a dump issue, if you can only select one, go for LUN Clone.
Q141
With clustered Data ONTAP 8.2 or later, which are valid values for Fractional reserve?
A. You cannot change the fractional reserve setting In clustered Data ONTAP 8.2 and later
B. 0, 25, 50, 75, or 100
C. 0, 50, or 100
D. 0 or 100
E. 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, or 100
Answer: D
Explanation:
Fractional reserve setting can be set only to 0 or 100
In previous versions of Data ONTAP, you could set the fractional reserve setting for a
FlexVol volume to any value between 0 and 100, inclusive. Starting with Data ONTAP 8.2,
the fractional reserve setting can be set only to 0 or 100.
If you upgrade a system to Data ONTAP 8.2 with volumes whose fractional reserve
settings are between 1 and 99, the fractional reserve setting for those volumes is set to 0.
Link: http://www.gokhancakir.com/wp-content/uploads/2013/06/215-07974_A0_ur001.pdf
Q142
Which three disk-type configurations are supported for Flash Pool? (Choose three)
A. FC and SAS
B. FC and SSD
C. SATA and SAS
D. SATA and SSD
E. SSD and SAS
Answer: B,D,E
Explanation:
Link: https://library.netapp.com/ecm/ecm_download_file/ECMP1196912
Q143
Identify two synchronous Fpolicy applications (choose two)
A. quota management
B. file-access and audit logging
C. storage resource management
D. compression and decompression services
Answer: A,D
Explanation:
Output from NetApp "Clustered Data ONTAP 8.2 File Access Management-Guide"
Asynchronous applications are ones where the external FPolicy server does not alter
access to files or directories or modify data on the Storage Virtual Machine (SVM). For
example:
File access and audit logging
Storage resource management
Synchronous applications are ones where data access is altered or data is modified by
the external FPolicy server. For example:
Quota management
File access blocking
File archiving and hierarchical storage management
Encryption and decryption services
Compression and decompression services
Q144
What feature balances load across a cluster while consuming less disk capacity than LS
SnapMirror copies?
A. SnapVAult copies
B. FlexCache software
C. FlexClone copies
D. DP SnapMirror copies
Answer: B
Q145
Prior to breaking a SnapMirror DP relationship, which statement is true about mounting the
destination volume?
A. It can be mounted in the namespace of any Vserver in the source- or destination cluster.
B. It cannot be mounted until after the SnapMirror break is performed.
C. It can be mounted in the namespace of the destination Vserver.
D. It can be mounted only in the same namespace as the source volume.
Answer: C
Explanation:
Link: https://library.netapp.com/ecmdocs/ECMP1287556/html/GUID-8A3F828F-CD3D48E8-A171-393581FEB2ED.html
Q146
Which three of these features were introduced in clustered Data ONTAP 8.2 (choose three)
A. SnapVault software for clusters
B. three-node clusters
C. eight-node scalable SAN clusters
D. Switchless-two-node clusters
Answer: A,C,D
Q147
F. iSCSI
G. NFS
Answer: A,B,D,F,G
Explanation:
http://webobjects.cdw.com/webobjects/media/pdf/netapp/clustered-data-ontapintroduction.pdf?cm_sp=NAPShowcase-_-Cat7Link3-_-Clustered+Data+ONTAP+Intro
(Page 4, Topic 1.2)
Q151
A volume named volume217 resides on an aggregate named node7_aggr12 and is
mounted in the
namespace at junction /source/april/test217. A file named revert.cpp is at the root of
volume217. A volume move operation relocates volume217 to node3_aggr3. What is the
fully qualified path to revert.cpp after the move is complete?
A. /node3_aggr3/source/april/test217/revert.cpp
B. /node3_aggr3/volume217/revert.cpp
C. /source/april/test217/revert.cpp
D. /vol/source/april/test217/revert.cpp
E. /vol/volume217/revert.cpp
Answer: C
Q152
What is considered when selection LS mirror copy? (choose three)
A. If an LS mirror copy is on the same node as the network module that fields the request,
the network module uses that LS mirror copy
B. If a write request goes to LS mirror, It forward it to flexvol
C. if no LS mirror copy is on the same node as the network module that fields the request,
the network module uses an up-to-date LS mirror copy on another node.
D. If a write request goes to LS mirror, it returns error.
Answer: A,C,D
Q153
Which two configurations are supported in clustered Data ONTAP 8.2 and later? (Choose
two)
A. An 8-node cluster serving FCoE, ISCSI, CIFS, and NFS
B. A single-node cluster serving FC, FCoE, ISCSI and SMB 3.0
C. A 4-node cluster serving iSCSI from an Infinite Volume
D. A 16-node cluster serving FC and FCoE
Answer: A,B
Q154
Which feature is NOT supported by clustered Data ONTAP 8.2?
A. Synchronous SnapMirror
Which statement is true regarding a single node cluster with Data ONTAP 8.2 or later?
A. A single node cluster is supported and can grow beyond one node.
B. A single node cluster is NOT supported
C. A single node cluster is supported but cannot grow beyond one node
D. A single node cluster is supported with 10GbE cross connects between an onboard NIC
and PCIe expansion NIC.
Answer: C
Q159
What is the file extension for NDMP backup CAB (Cluster Aware Backup extension)
A. CAB
B. BAC
C. CAP
D. NDBC
Answer: A
Q160
When a pNFS 4.1 client is connected to a LIF on node 2 of an 8 node clustered Data
ONTAP pNFS 4.1 Vserver, and the data volume being read is moved to node 1, which
statement is true?
A. The client redirects from a LIF on node 2 to a LIF on node 1 if available and continues
data access uninterrupted.
B. The client stays connected to a LIF on node 2 and accesses the data on node 1 through
the cluster network.
C. DNS records are updated and the client moves access to a LIF on node 1 from DNS
referral.
D. When a data volume is moved, only CIFS clients are affected.
Answer: A
Q161
Which two actions protect an Infinite volume from the loss of a namespace constituent?
(Choose two)
A. Minor the namespace constituent by using an intracluster data protection mirror
B. Mirror the namespace constituent by using an Intercluster data protection mirror
C. Mirror the namespace constituent by using a load-sharing mirror
D. Mirror the namespace constituent by using a FlexCache mirror
Answer: B,C
Q162
Which parameter must the cluster administrator properly define when configuring an iSCSI
logical interface in Data ONTAP 8.1 Cluster-Mode and later?
A. data-access
B. data-address
C. data-protocol
D. data-routing
E. No parameter needs to be defined as no additional parameter is required.
Answer: C
Explanation:
http://webobjects.cdw.com/webobjects/media/pdf/netapp/clustered-data-ontapintroduction.pdf?
cm_sp=NAPShowcase-_-Cat7Link3-_-Clustered+Data+ONTAP+Intro
Q163
What tool can be used to map IQNs to LUNs for a Vserver?
A. Protection Manager
B. OnCommand System Manager
C. Operations Manager
D. Unified Element Manager
Answer: B
Explanation:
Link: https://library.netapp.com/ecm/ecm_download_file/ECMP1196784
Q164
Which storage efficiency features are available in clustered Data ONTAP 8.2? (choose all
that apply)
A. Thin provisioning
B. FlexClone
C. Deduplication
D. SnapVault
E. Compression
F. SyncMirror
Answer: A,B,C,E
Q165
Which two statements are true with clustered Data ONTAP support of IPv6? (Choose two)
A. IPv4 and IPv6 configurations are supported on the cluster management LIF
B. IPv4 and IPv6 configurations are supported on the same data LIF
C. IPv6 allows a data LIF to span more than one Vserver
D. IPv4 and IPv6 configurations are supported on the cluster interconnect
Answer: A,B
Explanation:
Link: https://library.netapp.com/ecm/ecm_download_file/ECMP1196907
Q166
Which statement is true about establishing a SnapMirror relationship?
A. It sets up the relationship on the source node only.
B. It sets up the relationship and starts the initial data transfer.
A. bootarg.init.boot_gx
B. bootarg.init.boot_7-mode
C. bootarg.init.boot_cluster-mode
D. bootarg.init.boot_clustered
Answer: D
Explanation:
http://www.ontap8.com/how-to-convert-a-data-ontap-node-from-one-operating-mode-tothe-other/
Q171
What three statements are true about LIF failover? (Choose three.)
A. A data Ethernet LIF fails over when the cluster is in quorum.
B. A cluster management Ethernet LIF fails over when a port is down.
C. A cluster management Ethernet LIF will never automatically revert back to its home port.
D. A data Ethernet LIF will not revert back by default to its home port.
E. A node management Ethernet LIF fails over when a port is down.
F. A node management Ethernet LIF will never automatically revert back to its home port.
Answer: A,D,F
Q172
What are some of the benefits to customers when using clustered Data ONTAP? (Choose
all that apply)
A. Scalability
B. Transparency
C. Flexibility
D. Non-disruptive operations
Answer: A,B,C,D
Q173
Fpolicy supports which of the following protocols? (choose 6)
A. SMB 1.0
B. iSCSI
C. SMB 2.0
D. SMB 2.1
E. FC
F. SMB 3.0
G. NFS v3
H. NFS v4.0
Answer: A,C,D,F,G,H
Explanation:
Fpolicy support all SMB versions SMB 1.0, SMB 2.0, SMB 2.1 and SMB 3.0, and major
NFS versions like NFS v3 and NFS v4.0
Q174
Name two modes of BranchCache. (Choose two.)
A. Hosted
B. Distributed
C. intercluster
D. Vserver-aware
Answer: A,B
Explanation:
https://library.netapp.com/ecmdocs/ECMP1196993/html/GUID-22EA47D8-0E5E-4BE3892FCF189C9C3A9D.html
Q175
Which NetApp Virtual Storage Tier component works at the host level?
A. Flash Pool
B. Flash IO
C. Flash Disk
D. Flash Accel
E. Flash Cache
Answer: D
Explanation:
With two recent product additions to VST, NetApp now offers end-to-end Flash options
spanning from the client application through the disk subsystem. Controller level. Storage
controller-based Flash--NetApp Flash Cache--retains hot, random read data.
(You can learn more about the algorithms used by Flash Cache and other details in a
previous Tech OnTap article.) Disk-subsystem level. NetApp Flash Pool technology uses
a hybrid model with a combination of SSDs and HDDs in a NetApp aggregate. Hot random
read data is cached and repetitive write data is automatically stored on SSDs.
Server level. NetApp Flash AccelTM technology extends VST into the server. It uses any
server-side Flash device (PCI-e Flash card or SSD) as a local cache that off-loads I/O from
networks and back-end storage to deliver optimum I/O efficiency to your busiest
applications while freeing up server CPU and memory resources. All three levels continue
to offer the full advantages of VST, including: Real-time promotion of hot data with high
granularity. Hot data enters VST immediately, and its 4KB granularity means that it uses
Flash-based media very efficiently.
Easy to deploy and simple to manage. VST works with your existing data volumes and
LUNs. It requires no complicated or disruptive changes to your storage environment. There
is no need to set policies, thresholds, or time windows for data movement.
Fully integrated. VST is fully integrated with the NetApp Unified Storage Architecture, which
means that you can use it with any NAS or SAN storage protocol with no changes.
Link: https://communities.netapp.com/docs/DOC-19016
Q176
Possible roles for Single-Node Cluster: (choose three)
A. Production
B. Development
C. Testing
D. ABM
Answer: B,C,D
Q177
A. reassign the master of all RDB rings to a node that will be staying up
B. migrate node-management LIFs to a node that will be staying up
C. move Vserver root volumes to a node that will be staying up
D. set both nodes that are coming down to "ineligible"
E. ensure that Epsilon is assigned to one of the nodes that will be staying up
Answer: D,E
Q182
For Vserver-aware NDMP backups, the ______________ must be enabled with clusteraware backup extensions.
A. vServer management LIF
B. DMA server
C. Data LIF
D. Node management LIF
Answer: C
Explanation: Explanation/Reference:
https://library.netapp.com/ecm/ecm_download_file/ECMP1196874
Q183
Protocol access is provided to data via what?
A. Cluster
B. A virtual filer
C. A Virtual Server
D. A high-available pair of storage systems
Answer: C
Explanation:
Link: https://library.netapp.com/ecm/ecm_download_file/ECMP1196891
Q184
What three statements are true about LIF failover? (Choose three.)
A. A node management Ethernet LIF will never automatically revert back to its home port.
B. A node management Ethernet LIF can fail over to its partner node when a port is down.
C. A data Ethernet LIF will not automatically revert back to its home port.
D. A cluster management Ethernet LIF will never automatically revert back to its home port
E. A cluster management Ethernet LIF can fail over when a port is down.
F. A data Ethernet LIF can fail over when the cluster is in quorum.
Answer: B,C,E
Explanation: https://library.netapp.com/ecmdocs/ECMP1401193/html/GUID-6DBD40F8EA21-42AE-82CF-AEB556BEC783.html
"Scenarios that cause a LIF failover
LIF failover occurs in scenarios such as port failure, network interface failure, or cable
failure. LIFs can be associated with failover rules that enable you to reroute the network
traffic to other available ports in the cluster.
Q191
In clustered Data ONTAP, the NFS mount or the CIFS share path need to contain the
following:
A. Vserver root volume
B. Absolute path of the volume
C. Aggregate name for the volume
D. Junction path name for the volume
Answer: D
Q192
Which two clustered interconnect switches are supported in clustered Data ONTAP 8.2?
(Choose two)
A. Nexus 5596
B. MDS9124
C. CN5010
D. CN1610
Answer: A,D
Q193
Which two features are supported in clustered Data ONTAP 8.2? (Choose two)
A. External USB support
B. MetroCluster
C. Infinite volume
D. Flash cache
E. Infiniband data interface
F. SnapLock
Answer: C,D
Explanation:
https://communities.netapp.com/docs/DOC-27777
Q194
When using Data ONTAP 8.1 Cluster-Mode and later, what is the default for new
aggregates?
A. 32-bit aggregates
B. 64-bit aggregates
C. 128-bit aggregates
D. cluster aggregates
E. traditional aggregates
F. Vserver aggregates
Answer: B
Explanation:
https://library.netapp.com/ecmdocs/ECMP1196986/html/GUID-D9F611BC-F7B4-4057A76B-357BBAB7002F.html
Q195
Clustered Data ONTAP 8.2 or later Quality of Service (QoS) Policies have which three
characteristics?
A. A LUN's QoS policies can be changed dynamically
B. A QoS policy can be decreased
C. A QoS policy can be increased
D. A Qtree's QoS policies can be changed dynamically
E. A volume can be a member of two QoS policies
Answer: A,B,C
Q196
Which of the following statements are true about data protection mirrors? (Choose all that
apply)
A. A data protection source volume supports up to 4 destination mirrored volumes
B. A data protection source volume supports up to 1 destination volume per node
C. A volume must be created before it can be used as a mirror destination
D. Creating a mirror relationship also creates the destination volume
Answer: A,C
Q197
Which version of Data ONTAP first supports Flash Pool?
A. Data ONTAP 8.1.1 Cluster-Mode
B. Data ONTAP 7.3
C. Data ONTAP 8.1 7-Mode
D. Data ONTAP 8.1 Cluster-Mode
Answer: A
Q198
If a customer has a 2-node cluster, which of the following must be enabled for storage
failover (SFO) to function properly?
A. cluster ha modify -configured true
B. cluster modify -node -eligibility true
C. storage failover modify -node enabled true
D. storage failover modify -node -hwassist true
Answer: A
Q199
Which storage system combination is supported in a 4-node cluster?
A. A pair of FAS3270s and a pair of FAS3020s
B. A pair of FAS3270s with a FAS3240 and a FAS6240
C. A pair of FAS6280s and a pair of E7900s
E. Z:\vola\2011\june\report.doc
Answer: B
Q203
What does Storage Failover Allow?
A. disk to fail over between HA partners
B. disk to fail over to a plex
C. disk to fail over to any node in a cluster
D. disk to fail over to the Epsilon node
Answer: A
Explanation:
https://library.netapp.com/ecmdocs/ECMP1196817/html/storage/failover/show.html
Q204
Within clustered Data ONTAP 8.2 or later, which two functionalities are supported with an
external asynchronous FPolicy server? (Choose two)
A. Audit logging
B. Compression and decompression services
C. Encryption and decryption services
D. File Access
E. Hierarchical storage management
Answer: A,D
Explanation:
https://library.netapp.com/ecmdocs/ECMP1196817/html/vserver/fpolicy/policy/externalengine/create.html
Q205
In Data ONTAP 8.1.1 Cluster-Mode, what is the maximum cluster size for SAN protocols?
A. 10 nodes
B. 6 nodes
C. 2 nodes
D. 4 nodes
E. 8 nodes
F. 12 nodes
Answer: B,C,D
Explanation: Explanation/Reference:
http://www.arrowecs.cz/web/infobaze.nsf/0/1fb4873692d7b661c1257b0300379f26/$FILE/N
PA_2013_Pavlicek.pdf (slide 28)
Q206
What three privilege leves are found in clustered Data ONTAP? (Choose three)
A. admin
B. advanced
C. backup
D. diagnostic
E. manage
F. single_user
Answer: A,B,D
Q207
Which resource is associated with all logical interfaces?
A. cluster
B. cluster-routes
C. group-routes
D. port
E. VServer-routes
Answer: D
Explanation: Explanation/Reference:
https://library.netapp.com/ecmdocs/ECMP1196817/html/network/interface/create.html
Q208
A clustered Data ONTAP 8.2 Infinite Volume can share an aggregate with an FlexVol
volume.
A. True
B. False
Answer: A
Q209
Which three statements are true about a node's vol0 volume? (Choose three)
A. It is not part of the namespace.
B. One exists on every node in the cluster.
C. It is the most efficient place to store critical user data.
D. It should have LS mirrors on every node in the cluster.
E. It cannot be moved with the volume move command
Answer: A,B,E
Q210
To support multi-tenancy, an administrator must create or enable which type of unique
login account?
A. vsadmin, for the cluster
B. admin, for each Vserver
C. admin, for the cluster
D. vsadmin, for each vserver
Answer: D
Q211
What are four storage efficiency features that Data ONTAP 8.1 or latter Cluster-Mode
provides ? (Choose four)
A. transparent files
B. thin provisioning
C. SnapVault
D. FlexClone
E. deduplication
F. compression
Answer: B,D,E,F
Q212
Within the navigation pane, what are the three stacks in system Manager's tree menu?
A. Network
B. Cluster
C. Node
D. System
E. vServer
Answer: B,C,E
Explanation: Explanation/Reference:
http://studydroid.com/printerFriendlyViewPack.php?packId=553227
Q213
Which of the following is a feature of NFS 4.1?
A. ACLs are not used
B. Clients can re-acquire a delegation without re-opening a file
C. Symbolic links are not support
D. Traffic can occur over Fibre Channel
E. It is stateless
Answer: B
Q214
Which two statements are true in a SnapMirror LS mirror relationship? (Choose Two)
A. Client requests to write data are allowed if the user is root
B. Client requests to write data are denied unless accessing the admin share.
C. Client requests to read data are only allowed if the mirror is up-to-date.
D. Client requests to read data are redirected to the LS mirror destination volumes.
Answer: B,D
Q215
Which two LIFs are able to failover or migrate to other nodes in the cluster? (Choose two.)
A. cluster LIF
B. data LIF of protocol CIFS
C. data LIF of protocol FCoE
E. 4 nodes
F. 2 nodes
Answer: D,E,F
Q224
How many concurrent SSH administrative sessions for a node are supported?
A. 25
B. 64
C. 128
D. 125
Answer: B
Q225
Which type of LIF allows replication between two clusters?
A. cluster
B. cluster-mgmt
C. data
D. intercluster
E. node-mgmt
Answer: D
Q226
Logical interfaces support which three types of resources? (Choose three)
A. Cluster
B. Cluster-routes
C. Failover groups
D. Group-routes
E. Interface groups
F. Port
G. VLAN
H. VServer-router
Answer: E,F,G
Q227
Which statement is true about converting an aggregate from 32-bit to 64-bit?
A. It is supported when adding disks.
B. It is supported without adding disks.
C. It is supported in maintenance mode.
D. It now supported. You must use VSM to migrate 32-bit to 64-bit.
Answer: A
Q228
Which description of clustered Data ONTAP 8.2 Infinite Volume (InfiniVol) is true?
A. Infinite Volume Vservers can share aggregates
B. Infinite Volume Vservers use Traditional volumes
C. Infinite Volume Vservers and FlexVol Vservers can co-exist in the same cluster
D. Infinite Volume Vservers and FlexVol Vservers cannot co-exist
Answer: C
Explanation:
https://library.netapp.com/ecmdocs/ECMP1196798/html/GUID-E643017F-041B-4ECCBEA1-E4D80E26A47E.html
Q229
Which LIF is associated with the admin vserver?
A. Admin LIF
B. Data LIF
C. Cluster management LIF
D. Cluster LIF
E. Node management LIF
Answer: C
Q230
What is the GUI-based interface that manages a cluster?
A. Cluster Bench
B. Device Manager
C. FilerView
D. Node Studio
E. System Manager
Answer: E
Explanation:
http://www.netapp.com/us/products/management-software/system-manager.aspx
Q231
Which types of LIFs can be assigned a user-defined failover group? (choose all that apply)
A. Cluster LIF
B. Node-management LIF
C. Cluster-management LIF
D. NAS data LIF (NFS,CIFS)
E. SAN data LIF (iSCSI, FC)
Answer: B,C,D
Q232
If a cluster is in quorum, what is the minimum number of participating nodes that must be
healthy?
A. Two thirds
B. Simple majority
C. Three quarters
D. Half
Answer: B
Q233
What are two capabilities of Vserver setup? (Choose two)
A. It licenses Vserver functionality
B. It joins an exisiting Vserver to the cluster.
C. it creates a new Vserver that can host FCP LUNs.
D. It creates a new cluster Vservers
E. It configures an existing Vserver
Answer: D,E
Explanation: https://library.netapp.com/ecmdocs/ECMP1196798/html/GUID-68CC383E06E6-48AF-B7F5-8B510750EDDE.html
Q234
Which protocol(s) does Infinite Volumes support?
A. All supported protocols on Data ONTAP
B. NFSv3 and NFSv4 only
C. NFSv2 and NFSv3 only
D. File access and protocol improvements
E. NFSv3 and SMB 1.0 only
Answer: D
Explanation: Infinite Volumes use the unified security style, which enables all clients to
view and set file permissions, regardless of the file permissions that are currently in effect
on a given file or directory.
Unified security style also facilitates access checks using both Windows and UNIX
credentials.
https://library.netapp.com/ecmdocs/ECMP1511540/html/GUID-E1463130-422D-45CBB9C2-D041258F88B0.html
Q235
A FAS6280 running ONTAP 8.0.2 HAS A 32-bit root aggregate. After upgrading to Data
ONTAP 8.1, what is the status of the root aggregate?
A. The root aggregate remains 32-bit
B. The root aggregate converts from 32 to 64-bit in place
C. The root aggregate auto-migrates to a new 64-bit aggregate
D. The upgrade fails with a message to create a new 64-bit aggregate before upgrade
Answer: A
Q236
Which two Vservers are created automatically by the cluster setup process? (Choose two)
A. Admin
B. Data
C. Management
D. Node
E. Protocol
Answer: A,D
Q237
What command starts recording the current CLI session into a file?
A. system cli record
B. system record start
C. system script record
D. system script start
Answer: D
Q238
Which are two requirements for the Cluster-Mode solution? (Choose two.)
A. Thunderbolt or LightPeak cabling with backplane interface on storage
B. Management switches
C. InfiniBand cabling with backplane interface for all storage systems
D. FC Cluster switches
E. Cluster switches
Answer: C,E
Q239
For RAID-DP aggregates created with clustered Data ONTAP 8.2 or later, what is the
default minimum number of disks?
A. 1
B. 2
C. 3
D. 4
E. 5
F. 6
G. 10
Answer: C
Explanation:
https://library.netapp.com/ecm/ecm_download_file/ECMP1196912
Q240
With clustered Data ONTAP 8.2 or later, and administrator may use NDMP command at
which two levels? (select two)
A. Node
B. Cluster
C. Intercluster
D. VServer
Answer: A,D
Explanation:
https://library.netapp.com/ecmdocs/ECMP1196874/html/GUID-65733B88-154A-432BB1D1B5F27D46F4E8.html
Q241
Volumes can be moved from 32-bit aggregates to which two types of aggregates? (Choose
two.)
A. 32-bit aggregates
B. 64-bit aggregates
C. Flex aggregates
D. Traditional aggregates
Answer: A,B
Q242
What is the maximum number of node a SAN cluster in Data ONTAP 8.2 can have?
A. 1
B. 2
C. 6
D. 8
E. 16
F. 24
G. 32
Answer: D
Explanation:
https://communities.netapp.com/docs/DOC-27777
Q243
Which of the following Vserver types are created automatically by the cluster setup
process? (choose all that apply)
A. Management
B. Admin
C. Cluster
D. Node
E. Data
F. Diagnostic
Answer: B,D
Q244
What kind of structure can be deduplicated?
A. A disk
B. An aggregate
C. A FlexVol
D. a qtree
Answer: C
Explanation:
https://communities.netapp.com/community/netapp-blogs/drdedupe/blog/2010/04/07/hownetappdeduplication-works--a-primer
Q245
What three protocols obtain the Data ONTAP software image? (Choose three)
A. CIFS
B. FTP
C. HTTPS
D. HTTP
E. NFS
Answer: B,C,D
Explanation:
https://library.netapp.com/ecm/ecm_download_file/ECMP1196990
Q246
When a client transverses a junction, the client has entered:
A. a different Vserver
B. a different volume
C. a different junction
D. a different cluster
Answer: B
Q247
Which Data ONTAP Cluster-Mode clone technology will lock a Snapshot copy?
A. LUN Clone
B. Snapshot Clone
C. Volume Clone
D. Aggr Clone
Answer: A
Explanation:
https://library.netapp.com/ecmdocs/ECMP1196995/html/GUID-AE6D55F2-DD8F-4D348374-B0B5587DB60C.html
Q248
Identify two synchronous Fpolicy applications:
A. Data motion service
B. Encryption and decryption services
C. Logical interface migration management
D. File archiving and hierarchical storage management
Answer: B,D
Explanation:
https://library.netapp.com/ecmdocs/ECMP1196891/html/GUID-FFAEA690-552D-4261A1B904DA99932DF0.html
Q249
A storage administrator create a Quality of Service ( QoS) policy named pgMB300 which
sets a maximum throughput of 300MB/s, and a second Quality of Service policy named
pglO200 which sets the maximum throughput to 200 IOPS. The storage administrator
assigns the pgMB300 QoS policy to Vserver vs1. The storage administrator then attempts
to assign the pglO200 QOS policy to vol1 of vs1.
What is the outcome?
A. The attempt will succeed. You can assign Qos policy to storage object so long as single
object
does not have multiple policy groups assigned to it.
B. The attempt will fail. You cannot have policies with differently maximum throughput
units. They
all have to be MB/s or all have to be IOPS.
C. The attempt will succeed. You can nest IOPS policy limit instead a MB/s policy limit.
D. The attempt will fail. You cannot nest policy groups in any manner.
Answer: D
Explanation: Explanation/Reference:
In the following illustration, the Vserver vs3 is assigned to policy group pg2. You cannot
assign volumes vol4 or vol5 to a policy group because an object in the storage hierarchy
(Vserver vs3) is assigned to a policy group.
https://library.netapp.com/ecmdocs/ECMP1196798/html/GUID-8992DEA7-DDA8-45FBA758-0B21AE183CDC-low.gif
https://library.netapp.com/ecmdocs/ECMP1196798/html/GUID-A307C24C-2416-44918510-1D1A386585EC.html
Q250
In clustered Data ONTAP 8.2 or later, what is largest number of nodes that can be
supported with any enabled SAN protocols?
A. 4
B. 6
C. 8
D. 10
E. 12
F. 24
Answer: C
Explanation:
https://communities.netapp.com/docs/DOC-27777
Q251
How many cluster switch (es) are required for a NetApp cluster?
A. 1
B. 2
C. 4
D. 6
Answer: B
Q252
What is the maximum number of nodes a NAS cluster can have?
A. 1
B. 2
C. 4
D. 8
E. 16
F. 24
G. 32
Answer: F
Q253
Which four statements are true about a node's vol0 volume? (Choose four.)
A. It cannot be moved with the volume move command.
B. It contains RDB databases and log files.
C. It is the most efficient place to store critical user data.
D. It is not part of the namespace.
E. One exists on every node in the cluster.
Answer: A,B,D,E
Q254
Netapp Remote Support Agent (RSA) is supported which two FAS module types? (Choose
two)
A. BMC
B. ILO
C. RLM
D. RTC
E. SP
Answer: C,E
Q255
Administrator can natively run Data ONTAP-7Mode commands in what shell?
A. Adminshell
B. Clustershell
C. Nodeshell
D. Systemshell
Answer: C
Explanation:
https://library.netapp.com/ecmdocs/ECMP1196780/html/GUID-64D7ED18-1918-4B73B535A483584C8BFF.html
Q256
Which statement is true about NFS exports in Data ONTAP Cluster-Mode?
A. Export policies are created and modified by editing /etc/exports.
B. Export can be either persistent or temporary.
C. Export policies and rules are stored in the RDB.
D. Both A and B
E. Both B and C
Answer: C
Q257
To operate DATA ONTAP 8.1 Cluster Mode SAN, what must be configured on both the
initiator and the target?
A. Logical Unit Access Initialization
B. Physical Unit Access Initialization
C. Symmetric Logical Unit Access
D. Asymmetric Logical Unit Access
E. SAN Access Initialization Protocol
Answer: D
Explanation: Explanation/Reference:
http://maben.homeip.net/static/computers/backup/storage/NetApp/SnapMirror%20Best%20
Practices%20Guide.pdf
Q258
New systems are shipped with the root volume in a 64-bit aggregate starting with which
Data ONTAP release?
A. 8.0.0
B. 8.0.1
C. 8.0.2
D. 8.1
Answer: D
Explanation: Explanation/Reference:
https://library.netapp.com/ecmdocs/ECMP1196798/html/GUID-A60F4F83-0034-4DB8838B-06E9D4BEF9A4.html
Q259
With clustered Data ONTAP 8.2, what two non-disruptive upgrade techniques are
supported on cluster of 8 nodes or more? (Choose too)
A. batch
B. parallel
C. rolling
D. synchronous
Answer: A,C
Q260
Which statement is true about NFS export in Cluster-Mode?
A. Export policies are created and modified by editing /etc/exports.
B. Exports can be either persistent or temporary.
C. Export policies and rules are stored in the RDB.
D. Both A and B
E. Both B and C
Answer: C
Q261
How can you prevent a single SnapMirror relationship from utilizing more than the desired
bandwidth?
A. Specify a SnapMirror throttle for the destination mode
B. Specify a SnapMirror throttle for the whole cluster
C. Specify a SnapMirror throttle for that relationship
D. Enable SnapMirror network compression
Answer: C
Q262
Which three network switches are supported in Data ONTAP 8.1.1 Cluster Mode? (Choose
three)
A. Nexus 5010
B. Nexus 5020
C. CN1601
D. CN1610
Answer: A,B,D
Q263
In clustered Data ONTAP 8.2, what is the maximum number of cluster nodes if any SAN
protocols are being used?
A. 2 node
B. 4 nodes
C. 6 nodes
D. 8 nodes
E. 10 nodes
F. 24 nodes
Answer: D
Q264
What is the maximum number of nodes in a cluster that the Cisco Nexus 5010 supports?
A. 12
B. 18
C. 20
D. 24
Answer: B
Q265
Which two switches are supported cluster switches? (Choose two)
A. Brocade 8000
B. Brocade FLS624
C. Cisco Nexus 5010
D. Cisco Nexus 5020
E. Cisco Catalyst 2960
Answer: C,D
Q266
Which two methods expose volumes to NAS clients? (Choose Two)
A. Mount directories of a volume in a namespace
B. Mount the required namespaces in a volume
C. Mount the required namespaces in an aggregate
D. Mount the required volumes in a namespace
Answer: A,D
Q267
Which three are components of the NetApp Virtual Storage Tier (VST)? (Choose three)
A. Flash Accel
B. Flash Cache
C. Flash Disk
D. Flash IO
E. Flash Pool
Answer: A,B,E
Q268
Which four steps must an administrator take before establishing a CIFS share? (Choose
four)
A. Create a volume
B. Configure a share policy with the desired values
C. Configure an export policy
D. Configure name mapping
E. Enable Active Directory routing
F. Mount a volume within the Vserver namespace
G. Set a default share policy
Answer: A,C,D,F
Q269
Which logical interface does not have migration nor failover migration capabilities?
A. cluster management
B. node management
C. data
D. target
Answer: B
Q270
Which three NFS versions foes Data ONTAP 8.1 Cluster-Mode support? (Choose three)
A. NFSv.0
B. NFSv.1
C. NFSv.1.1
D. NFSv3.0
E. NFSv4.1
F. NFSv5.0
Answer: D,E,F
Explanation:
http://www.globbtv.com/microsite/18/Adjuntos/TR4067%20NFSV3V4%20IN%20DATA%20ONTAP%208.1%20OPERATING%20IN%20CLU
STER-MODE%20IMPLEMENTATION%20GUIDE.PDF
Q271
Which SnapMirror type identifies backup vault relationships?
A. SV
B. DP
C. BV
D. LS
E. XDP
Answer: E
Explanation: Explanation/Reference:
https://library.netapp.com/ecmdocs/ECMP1196807/html/GUID-F096199F-4B20-420A81E4-0F3AAB98ABCA.html (Snapmirror management)
Q272
Which two SMB versions does Data ONTAP Cluster-Mode support? (Choose Two)
A. SMB 1.0
B. SMB 2.0
C. SMB 3.0
D. SMB 4.0
Answer: A,B
Explanation: Explanation/Reference:
http://gurkulindia.com/main/2013/06/enhancements-to-nfs-and-smb-netapp-clustermode/
Q273
Which SAN LIF type allows failover?
A. iSCSI LIFs only
B. FCoE LIFs only
C. FC LIFs only
D. iSCSI LIFs and FCoE LIFs only
E. FC LIFs and FCoE LIFs only
F. None of the above
Answer: F
Q274
SnapVault backup of a clustered Data ONTAP 8.2 or later system is done at what data set
level?
A. Aggregate
B. Directory
C. FlexVol
D. Qtree
Answer: C
Q275
What must be define in order to create a NFS export within Cluster-Mode?
A. An entry in the /etc/exports file
B. An export policy and rules under a Vserver
C. An export policy and rules under the FreeBSD shell
D. An export policy and rules under the node shell
E. export rules that are associated with a LIF
Answer: B
Explanation:
http://www.globbtv.com/microsite/18/Adjuntos/TR4067%20NFSV3V4%20IN%20DATA%20ONTAP%208.1%
20OPERATING%20IN%20CLUSTER-MODE%20IMPLEMENTATION%20GUIDE.PDF
Q276
In which shell can administrators natively run Data ONTAP 7-mode commands?
A. node shell
B. system shell
C. cluster shell
D. admin shell
E. diag shell
Answer: A
Q277
Which of the following statements is true about a Flash Pool?
A. A 32 bit or 64 bit aggregate containing SSDs and HDDs
B. A 32 bit aggregate containing SSDs and HDDs
C. A 64 bit aggregate containing SSDs and HDDs
D. A 64 bit aggregate containing only SSDs
Answer: C
Q278
Which are types of failover groups? (choose all that apply)
A. System-defined
B. User-defined
C. Next Available
D. Priority
E. Clusterwide
Answer: A,B,E
Explanation: Types of failover groups
Failover groups for LIFs can be system-defined or user-defined.
Additionally, a failover group called clusterwide exists and is maintained automatically.
Failover groups are of the following types:
System-defined failover groups: Failover groups that automatically manage LIF failover
targets on a per-LIF basis.
This is the default failover group for data LIFs in the cluster.
For example, when the value of the failover-group option is system-defined, the system will
automatically manage the LIF failover targets for that LIF, based on the home node or port
of the LIF.
Note: All the network ports should be assigned correct port roles, and all the network ports
of the same role should be in the same subnet.
User-defined failover groups: Customized failover groups that can be created when the
system-defined failover groups do not meet your requirements.
For a system with ports of the same role connected to multiple subnets, each LIF requires
a user-defined failover group with a failover group for each subnet.
You can create a failover group consisting of all 10-GbE ports that enables LIFs to fail over
only to the high-bandwidth ports.
Clusterwide failover group: Failover group that consists of all the data ports in the cluster.
This is the default failover group for the cluster-management LIFs only.
For example, when the value of the failover-group option is cluster-wide, every data port in
the cluster will be defined as the failover targets for that LIF."
https://library.netapp.com/ecmdocs/ECMP1401193/html/GUID-9600E800-B8E6-4A78-
B97B-912459BEFD63.html
Q279
Which statement is true about a Data Protection (DP) - type SnapMirror destination
volume?
A. It can be in a Data ONTAP GX Cluster
B. It must be on the same disk type as the source volume
C. It can be smaller than the source volume
D. It can be on a different disk type than the source volume
Answer: D
Q280
Which two actions protect an Infinite volume from the loss of a namespace constituent?
(Choose two)
A. Minor the namespace constituent by using an intracluster data protection mirror
B. Mirror the namespace constituent by using an Intercluster data protection mirror
C. Mirror the namespace constituent by using a load-sharing mirror
D. Mirror the namespace constituent by using a FlexCache mirror
Answer: B,C
Explanation: http://www.globbtv.com/microsite/18/Adjuntos/_TR4078_INFINITEVOLUME_BPG.PDF
Q281
Which is a supported management switch? (Choose two)
A. Brocade 8000
B. Brocade FLS624
C. Cisco Nexus 5010
D. Cisco Nexus 7000
E. Cisco Catalyst 2960
F. Cisco Nexus 5020
Answer: E,F
Explanation: The NX5010 and NX5020 are cluster switches with 10Gbps ports.On the
other hand these switches are reached their end of support and NX5596 is advised by
NetApp. As I know the first 8 ports of NX5010 and the first 16 ports of NX5020 are
1/10Gbitps ports, so theoretically both can connect the management ports, but officially
they are not management switches.
Please see https://support.netapp.com/NOW/download/software/cm_switches/
Q282
Which three SMB versions do Data ONTAP Cluster Mode 8.1 and later support? (Choose
three)
A. SMB 4.0
B. SMB 3.0
C. SMB 2.1
D. SMB 2.0
E. SMB 1.0
Answer: C,D,E
Explanation: Explanation/Reference:
Reference: http://hippodata.blogspot.com/2013/05/enhancements-of-nfs-and-smbnetapp.html
(see smb 2.0 and 2.1)
Q283
Identify two asynchronous Fpolicy applications. (Choose two)
A. Quota management
B. File-access and audit logging
C. Storage resource management
D. Compression and decompression services
Answer: B,C
Explanation: Explanation/Reference:
http://pdf.it-exams.com/NS0-156.pdf
Q284
How many cluster ports does each node have by default?
A. One
B. Two
C. Three
D. Four
Answer: B
Explanation:
http://hippodata.blogspot.com/2013/05/netapp-cluster-mode-networking-deep-dive.html
stking.com/networkappliance/what-three-cluste
Q285
In Data ONTAP 8.1.1 Cluster-Mode, what is the maximum TCP read size for an NFSv3
client?
A. 1,048,576 bytes
B. 32,768 bytes
C. 65,536 bytes
D. 2,097,152 bytes
Answer: A
Explanation:
https://library.netapp.com/ecmdocs/ECMP1136576/html/GUID-678ABF68-C8884517A51DA98BD96CA851.html
Q286
What are three types of resource supported by logical interfaces? (Choose three)
A. VServer-routes
B. port
C. Interface groups
D. failover groups
E. cluster-routes
F. cluster
G. group-routes
H. VLAN
Answer: B,C,H
Q287
What should an administrator do first before shutting down two nodes of a 4-node cluster?
A. Migrate node-management LIFs to a node that is staying up
B. Move Vserver root volumes to a node that is staying up
C. Reassign the master of all RDB rings to a node that is staying up
D. Set both nodes that are coming down to "ineligible"
Answer: D
Q288
A volume is created named vs2_vol2 on aggregate netappu-02. It is mounted in the vs2
namespace at /vs2/vol2. Volume move moves this volume to the netappu-01 aggregate.
What is the path to this volume after the move?
A. /netappu-01/vs2/vs2_vol2
B. /vs2/vol2
C. /vol/vs2_vol2
D. /vol/vs2/vs2_vol2
Answer: B
Q289
Which two now feature are available in Data ONTAP 8.1.1 C-Mode? (Choose two)
A. Flash pool
B. SSD Support
C. Infinite volume
D. Infiniband
Answer: A,C
Explanation:
https://communities.netapp.com/community/netappblogs/sanbytes/blog/2012/06/24/announcingdata-ontap-811-operating-in-cluster-mode
Q290
Which protocols are allowed by default data firewall policy? (choose all that apply)
A. DNS
B. HTTPS
C. NDMP
D. NTP
E. SNMP, SSH, Telnet
Answer: A,C
Q291
Which three storage features can be scaled by storage administrators? (Choose three.)
A. capacity scaling, by allowing more than two storage systems to be combined with larger
disk shelves
B. energy scaling, by allowing the cluster to share the same power source
C. heterogeneous scaling, by allowing E-Series and FAS-Series systems within a single
cluster
D. network scaling, by providing three or more network switches for the cluster network
E. operational scaling, by allowing the entire cluster to be administrated through a single
resilient interface
F. performance scaling, by using Flash Cache, SSDs, and Quality of Service
Answer: A,E,F
Q292
Which two clustered Data ONTAP clone technologies will lock volume snapshot? (Choose
two)
A. Vol Clone
B. LUN Clone
C. AggrClone
D. FlexClone
E. SnapClone
Answer: B,D
Explanation: Explanation/Reference:
http://examcramnotes.blogspot.nl/
Q293
What three cluster administrator roles are predefined? (Choose three)
A. admin
B. backup
C. none
D. readonly
E. root
F. vsaadmin
Answer: A,C,D
Explanation:
From then 8.2 management book (pdf from the netapp site)
Admin
Autosupport
Backup
Readonly
None
Q294
Which of the following logical interfaces have failover and migration capabilities? (choose
all that apply)
A. client
B. cluster management
C. data
D. node management
E. controller
Answer: B,C
Q295
Which two Netapp tools perform pre-checks to determine whether a NAS environment
meets the requirements for transitionin from 7-mode to clustered Data ONTAP? (Choose
Two)
A. 7-mode Transition Tool
B. Clustered ONTAP transition Tool
C. Migration Checklist
D. Transition Advisor
E. Transition Deck
Answer: A,D
Explanation: Explanation/Reference:
https://communities.netapp.com/servlet/JiveServlet/previewBody/33911-102-356904/1405tot_article_feature_pdf.pdf (page 2)
Q296
Which command can be used to identify the target iqn name in Data ONTAP 8.1 ClusterMode and later?
A. cluster iscsi name
B. cluster iscsi nodename
C. cluster iscsi show
D. vserver iscsi nodename
E. vserver iscsi name
F. vserver iscsi show
Answer: F
Explanation: Explanation/Reference:
https://library.netapp.com/ecmdocs/ECMP1196817/html/vserver/iscsi/show.html
Q297
What are three types of Vservers? (Choose three)
A. vFiler
B. node
C. intercluster
D. cluster
E. admin
F. data
Answer: B,E,F
Explanation:
https://library.netapp.com/ecmdocs/ECMP1196798/html/GUID-D860985F-11BF-45899457-E0FD03130B1F.html
Q298
The Catalyst 2960 can be used only on the management network for clusters that have
_____nodes.
A. 12
B. 16
C. 18
D. 20
E. 24
Answer: E
Q299
To maintain a cluster quorum, Epsilon functions as a ________.?
A. duplicated management database
B. master node
C. secondary node
D. tie-breaker
Answer: D
Q300
Which process is used for client access for NFS and CIFS in Cluster-Mode?
A. accessd
B. accd
C. securityd
D. secd
E. mgwd
F. sysd
G. cached
Answer: D
Q301
What are the LIF roles that can be assigned to ports in clustered ONTAP? (choose all that
apply)
A. Data
B. Cluster management
C. Cluster
D. Node management
E. Intercluster
Answer: A,B,C,D,E
Q302
Which feature makes it possible for a storage administrator to add more than storage
systems to a cluster?
A. Scale horizontal
B. Scale out
C. Scale up
D. Scale vertical
Answer: B