Académique Documents
Professionnel Documents
Culture Documents
Made in Germany
Powered by
Designed for continuous operation, CSUnitec's portable magnetic drills are ideal for drilling structural steel
and virtually any metal. We offer the most compact, powerful and reliable series of portable magnetic drills
for holes up to 5-1/8" diameter. All CS Unitec drills are heavy-duty for use in construction and industry. Our
complete line includes electric, pneumatic and hydraulic tools. They are available for prompt delivery.
CS Unitec is the industry leader in: Our drills have unique features:
Power-to-weight ratios
Strongest clamping force with
high-density (HD) dual-coil magnets
Magnetic drills for tapping
Annular Cutters: TiAlN, HSS, cobalt
steel and carbide-tipped
Overheating
Protection with
CoolMag
COOLMAG Electromagnets
ensure that the magnet does not overheat. When the
magnet is switched on for long periods of time, the coils
could overheat or even burn out. The CoolMag feature
reduces the power of the magnets when the drill motor is
not active. Therefore, it won't build up heat.
CS Unitec high-density dual-coil magnets are ground, not
cast, and are wound into two circles to increase the
surface area and density of the magnetic field.
Keyless,
quick-change
system for annular
cutters saves time
and money.
Just twist and lock.
Twist Drilling
ARMOR-PLATED
TiAlN Cutters
Reaming
Countersinking
Tapping
1-800-700-5919
SafeMag
System
Electronic Safety
Shutoff Sensor
The SAFEMAG System measures whether the magnet has sufficient adhesive force on
the material. An LEDindicator on the switch panel warns you of insufficient magnetic force
(Red Light) or tells you if the correct force is present (Green Light).
IQ Magnetic System
1-800-700-5919
p. 8
INDEX
p. 9-10
MAB 150
p. 11
p. 16
p. 20
MAB 425
p. 14
Capacity:
1-3/8" cutter;
5/8" twist drill
p. 18
p. 12
p. 23
MAB 1300
Powered by
MABasic Series
MAB 3000
Made in Germany
p. 24
p. 26
CSU Series
p. 29-31
AIRBOR AB-4300
p. 32
HB 4400
p. 33
Pneumatic power
Capacity: 2-1/16" cutter; 1/2" twist drill
Hydraulic power
Capacity: 2-1/16" cutter; 1/2" twist drill
Warranty
Products of CS Unitec, Inc. are warranted to be free from defects in material and workmanship for one year from date of purchase. This warranty does not apply to normal wear or products
which have been abused, misused, modified or repaired by someone other than CS Unitec, Inc. or its Authorized Service Representatives.
If a product proves defective in material or workmanship within one year after purchase, return it to CS Unitec, Inc. or an Authorized Service Center, transportation prepaid. CS Unitec, Inc. will,
at its option, repair or replace defective products free of charge.
CS Unitec, Inc.s sole liability and your exclusive remedy under this warranty is limited to repair or replacement of the defective product. There are no other warranties expressed or implied
and CS Unitec, Inc. shall not be liable for incidental, consequential or special damages, or expenses excepting only the cost or expense of repair or replacement as described above.
Safety
Operators of any power tool should use appropriate safety precautions for work being performed. This includes safety chains, eye protection, hearing protection, gloves and more. Follow
instructions included in operating manual.
1-800-700-5919
Made in Germany
Powered by
Annular Cutters
p. 34-41
p. 36-37
TiAlN ARMOR-PLATED
Unibroach
p. 38-39
High-speed steel
7/16" to 5-1/8" diameter
1", 2" and 3" depth
Special sizes available
TCT Hornet
p. 40-41
Large-Diameter Cutters
Tungsten carbide-tipped
1/2" to 5-1/8" diameter
1", 2-3/8" and 3-3/8" depth
Accessories
p. 40
INDEX
HSS Unibroach
p. 42-50
Lubricants
Pilot Pins, Drill Chucks and Tapping Tools
Arbors and Extensions
Power Assist
Countersinks, Drill/Taps and Chip Guard
Drilling Starter Kits
Power Worker Magnetic Stick
MOBILCLAMP
p. 42
p. 42-43
p. 44-45
p. 44
p. 45
p. 46
p. 46
p. 47
p. 48
Vacuum Plates
p. 49
p. 50
p. 52-55
p. 52
p. 53
p. 54
ROLEI
p. 55
p. 51, 56-67
Custom-Engineered Machines
Carbide-Tipped Hole Saws
Electric, Slow-Speed Electric Drills &Drive Units
Electric Drive Units/Special Motors
Pneumatic Drills & Drive Units
Corner Drills &Drive Units
Pneumatic/Hydraulic Rotary Hammers
Pneumatic Woodboring Drills
Pneumatic/Hydraulic Nut Runners
Electric/Pneumatic Dry Cutting Saws
1-800-700-5919
p. 51
p. 56
p. 57-58
p. 59
p. 60
p. 61
p. 62
p. 63
p. 64
p. 65-67
Annular Cutters
Diameter ()
MDM 40
MAB 3000
MABasic 200 MABasic 400 MABasic 450 BatteryPowered
Page 8
Page 9
Page 10
Page 10
up to
1-1/2"
up to
1-1/4"
up to
1-1/2"
up to
1-5/8"
up to
1/2"
up to
5/8"
up to
3/4"
up to
1/2"
Twist Drills
Diameter ()
MAB 150
MAB 425
MAB 455
MAB 485
MAB 525
MAB 455 SB MAB 485 SB MAB 525 SB
Page 11
Page 12
Page 14
Page 16
Page 18
Page 20
up to
1-1/8"
up to
1-1/2"
up to
1-3/8"
up to 2"
up to 2"
up to 21/2"
Tapping
Diameter ()
up to
15/16"
up to
15/16"
Countersinking
Diameter ()
up to
1-9/16"
up to 2"
Reaming
Diameter ()
up to 3/4" up to 7/8"
Stroke
3-1/8"
5-3/4"
6-1/3
6-1/3
5-7/8"
1"
6-1/3"
6-1/3"
6-1/3"
6-1/3"
Weight
24 lbs.
27 lbs.
27 lbs.
29 lbs.
35 lbs.
24 lbs.
29 lbs.
29 lbs.
29 lbs.
35 lbs.
Speed Range 1
(RPM)
440
450
430
250
400
400
430
250
50-250
70-280
760
450
760
450
100-450
180-580
Speed Range 2
(RPM)
Speed Range 3
(RPM)
Speed Range 4
(RPM)
CoolMag
CoolMAG
SafeMag
Set Screw
System
Electronic Safety
Shutoff Sensor
Tool Holder
Set Screw
Set Screw
Set Screw
Set Screw
Set Screw
Set Screw
MT2
MT2
MT2
MT3
Safety Friction
Clutch
Torque Control
Swivel/Adjustable
Base
Magnet Size
6-1/2" x
3-1/4"
6-5/8" x
3-1/3"
6-5/8" x
3-1/3"
6-5/8" x
3-1/3"
1-800-700-5919
6-5/8" x
3-1/3"
6-5/16" x
3-3/16"
6-5/8" x
3-1/3"
6-5/8" x
3-1/3"
6-5/8" x
3-1/3"
7-1/8" x
3-1/2"
Made in Germany
AutoMAB
1500
AutoMAB
1500 SB
MAB 825
MAB 800 KTS MAB 825 V
MAB 845
Page 22
Page 23
up to
1-1/2"
up to
2-3/8"
HB 4400
CSU 32AC
CSU 32RL
CSU 50AC
CSU 50RL
Page 32
Page 33
Page 29
up to
2-1/16"
up to
2-1/16"
up to
1-1/4"
MAB 1300
AIRBOR
Page 24
Page 26
up to 4"
up to
5-1/8"
up to 1"
up to
1-1/4"
up to
1-3/4"
up to
1-1/8"
up to
1-1/8"
up to
1-5/8"
up to 2"
up to 3"
up to
1-1/4"
up to 2"
up to 3/4"
CSU 100/3RL
Page 30
Page 31
Page 31
up to 2"
up to
3-3/16"
up to 4"
up to
1-1/4"
up to
1-1/4"
up to
1-1/8"
Max. tapping
up to 1-5/8"
up to 15/16"
3"
10"
10"
3.35" (12"
w/out retainer)
up to
10-1/4"
3-3/4"
5-3/4"
5-1/4"
10"
10"
37-1/2 lbs.
99 lbs.
55 lbs.
112 lbs.
43 lbs.
48-1/2 lbs.
24 lbs.
29 lbs.
57 lbs.
57 lbs.
360
40-110
40-110
30-80
400
0-630
450
250
100
40-140
65-175
65-175
50-120
450
175
120-480
140-360
140-360
130-350
245
220-600
220-600
210-550
385
Hydraulic
Allows thread
cutting
Overheating
protection
Magnet adhesion
indicator
Set Screw
Quick-change
Set Screw
keyless
MT3
Pneumatic
Set Screw
Special
Features
CSU 80AC
MT3
MT4
7-1/8" x
3-1/2"
8-11/16" x
8-11/16"
8-5/8" x
4-1/3"
Set Screw
Set Screw
MT2
MT3
MT3
Powered by
Swivel/adjustable
base
14" x 4-3/4"
8-3/4" x
3-1/2"
7-1/4" x 3"
1-800-700-5919
6-5/16" x
3-1/4"
6-1/2" x
3-1/2"
9" x 4-3/8"
9" x 4"
MDM 40
Cutter capacity
1 1/2" dia.
Made in Germany
Powered by
Powerful Reliable
9.25 Amp doubleinsulated motor
13"
9.5"
3.25"
Model MDM 40
Special Feature
All CS Unitec high-density dualcoil magnets are ground, not cast,
and are wound into two circles to
increase the surface area and
density of the magnetic field.
Stroke
(length)
Speed Range
(RPM)
Standard Equipment
11/2"
31/8"
440
Standard Equipment
also includes auto
lubrication, safety strap,
carabin hook, allen keys,
steel shipping case,
operating manual and
warranty certificate.
case intended mainly for shipping purposes; damage may occur in transit.
1-800-700-5919
MABasic 200
Made in Germany
Powered by
6.5
12.2" - 18.5"
11"
"
Cutter capacity
1 1/4" dia.
2"
"
6.6
.7"
3.3
"
Weight
27 lbs.
Hole Capacity
11/4" dia.
1/2" dia.
Speed
450 RPM
65/8" W x 31/3" H
Dimensions
Arbor Bore
3/4"
Internal Lubrication
Weldon Shank
1-800-700-5919
Made in Germany
Powered by
MABasic 450
MABasic 400
Drill up to
1-5/8" dia.
Specifications
MABasic 400
MABasic 450
Motor Power
Weight
Hole Capacity
Twist Drill Capacity
Speeds
Magnet Base Size
Dimensions
Magnetic Force (1" plate)
Arbor Bore
Spindle
Internal Lubrication
6.5
"
Standard Equipment
includes lubrication bottle,
safety strap, carabin hook,
allen keys, pilot pin and
carrying case.
2"
17" - 23.2"
14" - 20.4"
11"
11"
"
2"
"
6.6
"
2.5
3.3
"
6.6
"
3.3
"
"
2.5
10
1-800-700-5919
MAB 3000
Made in Germany
Powered by
Cutter capacity
1 1/8" dia.
Powerful Reliable
36 volt, 6.0 Ah Lithium Ion battery
Up to 40 holes of 3/4"dia. in 3/8"
thick steel in one charge
Compact, lightweight and
portable 35 lbs., including battery
12.4" - 18.35"
11.6"
"
With a 1/2" chuck (Part No. IBC 18), the MAB 3000 easily
converts to a standard drill press for conventional twist drills.
2"
"
6.6
"
2.4
3.3
"
Motor Power
Weight
35 lbs.
Hole Capacity
11/8" dia.
1/2" dia.
Speed
400 RPM
65/8" W x 31/3" H
Dimensions
Arbor Bore
3/4"
Internal Lubrication
Order MAB3000
Weldon Shank
1-800-700-5919
11
MAB 150
Cutter capacity
1 1/2" dia.
Made in Germany
Powered by
Powerful Reliable
9.25 Amp doubleinsulated motor
Ultra compact, 7" high
Lightweight, 24 lbs.
Designed for continuous use
Intelligent electronic torque
control
Integrated Safety
Internal cable routing
Simple, ergonomic arrangement
of controls for one-handed
operation
Cutter Capacity
11/2"
Stroke
(length)
1"
Speed Range
(RPM)
400
12
1-800-700-5919
MAB 150
Specifications
Made in Germany
Powered by
12.87"
7.09"
7.44"
1.73"
1.30"
3.15"
6.30"
Weight
24 lbs.
Hole Capacity
11/2" dia.
Speed
400 RPM
65/16" L x 33/16" W
Dimensions
2640 lbs.
Arbor Bore
3/4"
Automatic Lubrication
Included
Cutter capacity
1 1/2" dia.
Weldon Shank
Standard Equipment
1 Magnetic drilling machine
1 Pilot pin
1 Steel shipping case
1 Safety chain
1 Hexagon socket screw key SW 4
1 Operating manual
Standard
Equipment
also includes
auto lubrication,
safety strap,
carabin hook
and allen keys.
Steel
case intended
mainly for shipping
purposes; damage
may occur in transit.
1 Warranty certificate
1-800-700-5919
13
MAB 425
Cutter capacity
1 3/8" dia.
Made in Germany
Powered by
High speed and two gears for cutting and twist drilling
Internal
cable routing
protects the motor
power cord from
external damage
Powerful Reliable
9.25 Amp doubleinsulated motor
15-1/2" high, 29 lbs.
High-speed, 2-speed grease
gear case, ideal for annular
cutters and twist drills
Designed for continuous use
Intelligent electronic torque
control
71/2"
stroke
Integrated Safety
Green/Red LED magnetic force
indicator for safe operation
Internal cable routing
Simple, ergonomic arrangement
of controls for one-handed
operation
Emergency-off function
Cutter Capacity
Twist Drill /
Countersink
Stroke
(length)
Speed Range
(RPM)
Magnet Force
Indicator
13/8"
5/8"
61/3"
430 / 760
SafeMag
14
1-800-700-5919
MAB 425
Specifications
Made in Germany
Powered by
Cutter capacity
1 3/8" dia.
14.61"
15.47 - 21.46"
1.22"
2.40"
6.30"
11.50"
3.31"
6.61"
Weight
29 lbs.
Hole Capacity
13/8" dia.
5/8" dia.
Speeds
31/3" W x 65/8" L
Dimensions
3080 lbs.
Arbor Bore
3/4"
Automatic Lubrication
Included
Weldon Shank
Standard Equipment
1 Magnetic drilling machine
1 Pilot pin
1 Molded plastic carrying case
1 Safety chain
1 Hexagon socket screw key SW 4
Standard
Equipment
also includes
auto lubrication,
safety strap,
carabin hook
and allen keys.
1 Operating manual
1 Warranty certificate
1-800-700-5919
15
Cutter capacity
2" dia.
Made in Germany
Powered by
Powerful Reliable
10.5 Amp doubleinsulated motor
17-1/4" high, 29 lbs.
High-speed, 2-speed oilbath
gearbox, ideal for annular
cutters and twist drills
Designed for continuous use
Intelligent electronic torque
control
Integrated Safety
Green/Red LED magnetic
force indicator for safe
operation
MAB 455
For swivel
base, order
MAB 455 SB
Simple, ergonomic
arrangement of controls for
one-handed operation
5/8"
Model MAB 455 SB features a swivel
base providing 20 movement left and
right and 5/8" forward and backward.
Emergency-off function
Cutter Capacity
20
Twist Drill /
Countersink
Stroke
(length)
Two-Speed
(RPM)
Magnet Force
Indicator
Equipped with
Electronic
Safety Shutoff
Sensor (see p. 3)
2"
61/3"
7/8"
250 / 450
SafeMag
16
1-800-700-5919
Specifications
Made in Germany
Powered by
Cutter capacity
2" dia.
11.61"
3.46"
14.61"
17.24 - 23.54"
7.01"
1.50"
2.24"
3.31"
6.61"
Weight
29 lbs.
Hole Capacity
2" dia.
7/8" dia.
Speeds
31/3" W x 65/8" L
Dimensions
3750 lbs.
Arbor Bore
3/4"
Spindle
MT2
Automatic Lubrication
Included
Swivel Base
Weldon Shank
Standard Equipment
Standard
Equipment
also includes
molded plastic
carrying case,
operating
manual, auto
lubrication,
safety strap,
carabin hook
and allen keys.
1-800-700-5919
17
Cutter capacity
2" dia.
Made in Germany
Powered by
Powerful Reliable
Integrated Safety
Internal
cable routing
protects the motor
power cord from
external damage
20
5/8"
Cutter Capacity
Twist Drill /
Countersink
Ream /
Tap
Stroke
(length)
2-gear Variable
Speed (RPM)
2"
7/8" / 19/16
3/4" /
15/16"
61/3"
50-250
100-450
Electronics
Overheat
Protection
Variable-speed CoolMag
Control
Magnet Force
Indicator
SafeMag
18
1-800-700-5919
Reversible
(CW/CCW)
Specifications
Made in Germany
Powered by
Cutter capacity
2" dia.
3.46"
14.61"
17.24 - 23.54"
7.01"
11.61"
1.50"
2.24"
3.31"
6.61"
Weight
29 lbs.
Hole Capacity
2" dia.
7/8" dia.
Tapping Capacity
15/16" dia.
Speeds
31/3" W x 65/8" L
Dimensions
3750 lbs.
Arbor Bore
3/4"
Spindle
MT2
Automatic Lubrication
Included
Swivel Base
Weldon Shank
Standard Equipment
1 Magnetic drilling machine
1 Quick-change arbor system
KEYLESSWeldon 3/4"
Standard
Equipment
also includes
molded plastic
carrying case,
operating
manual, auto
lubrication,
safety strap,
carabin hook
and allen keys.
1 Warranty certificate
Annular Cutters:pages 34-41 Accessories:pages 42-50
1-800-700-5919
19
Cutter capacity
2 1/2" dia.
Made in Germany
Powered by
Powerful Reliable
Internal
cable routing
protects the motor
power cord from
external damage
With a 3/4"
chuck (Part No.
IBC 21), or MT3,
this model easily
converts to a
standard drill
press with a 5"
stroke for
conventional
twist drills.
Integrated Safety
Green/Red LED magnetic force
indicator for safe operation
Internal cable routing
Simple, ergonomic arrangement of
controls for one-handed operation
Emergency-off function
20
5/8"
Cutter Capacity
Twist Drill /
Countersink
Ream /
Tap
Stroke
(length)
2-gear Variable
Speed (RPM)
21/2"
1" / 2"
7/8" /
15/16"
61/3"
70-280
180-580
Electronics
Overheat
Protection
Variable-speed CoolMag
Control
Magnet Force
Indicator
Reversible
(CW/CCW)
SafeMag
20
1-800-700-5919
Specifications
Made in Germany
Powered by
Cutter capacity
2 1/2" dia.
3.54
14.60
19.17 - 25.08
6.73
11.65
1.33
2.08
3.54
7.09
Weight
35 lbs.
Hole Capacity
21/2" dia.
1" dia.
Tapping Capacity
15/16" dia.
Speeds
31/2" W x 71/8" L
Dimensions
8000 lbs.
Arbor Bore
3/4"
Spindle
MT3
Automatic Lubrication
Included
Swivel Base
Weldon Shank
Standard Equipment
Standard
Equipment
also includes
molded plastic
carrying case,
operating
manual, auto
lubrication,
safety strap,
carabin hook
and allen keys.
1 Warranty certificate
Annular Cutters:pages 34-41 Accessories:pages 42-50
1-800-700-5919
21
Cutter capacity
1 1/2" dia.
Made in Germany
Powered by
Powerful Reliable
10.5 Amp double-insulated motor
Compact, lightweight and portable:16-1/8"
high, 37-1/2 lbs.
Power feed automatically controls drill pressure
to maintain optimal RPMand feed rate
Designed for continuous use
Ideal hole cutting machine
for steel fabricators,
contractors and plant
maintenance professionals
Integrated Safety
Internal cable routing
Simple, ergonomic arrangement
of controls for one-handed
operation
Emergency-off function
Standard Equipment
1 Magnetic drilling machine
1 Steel carrying case
1 Safety chain
case intended
mainly for shipping
purposes; damage
may occur in transit.
1 Warranty certificate
11/2"
Stroke
(length)
Standard
Equipment
also includes auto
lubrication, safety
strap, carabin hook
and allen keys.
Steel
1 Operating manual
Cutter Capacity
30
Speed Range
(RPM)
3"
360
Weight
371/2 lbs.
Hole Capacity
11/2" dia.
Speed
360 RPM
31/2" W x 71/8" L
Dimensions
2640 lbs.
Arbor Bore
3/4"
Automatic Lubrication
Included
Swivel Base
Weldon Shank
22
1-800-700-5919
Made in Germany
Powered by
Powerful Reliable
16 Amp double-insulated motor
4-speed oilbath gearbox for
applications requiring high power
Designed for continuous use
Infinitely variable torque
control and full-wave
control electronics
Ideal for a wide variety of
drilling, boring and slotting
applications
Includes servo-assisted drilling
feature to help maintain feed
pressure during operation
"
4-3/
4"
Multi-axis positioning
Uses annular cutters
10" stroke
Twist drilling 1" dia.
Tapping up to 1-1/8"
Optional geared chuck IBC 21
Integrated cutting oil reservoir
Automatic internal lubrication
32
-5/
Integrated Safety
Simple, ergonomic
arrangement of controls for
one-handed operation
Emergency-off function
Cutter capacity
2 3/8" dia.
Standard Equipment
1 Magnetic drilling machine
1 Steel carrying case
1 Safety chain
1 Operating manual
1 Warranty certificate
Standard Equipment
also includes auto lubrication, safety strap,
carabin hook and allen keys.
Steel
Motor Power
Weight
Hole Capacity
Twist Drill Capacity
Tapping Capacity
Speeds
40-110, 65-175
140-360, 220-600 RPM
811/16" W x 811/16" L
185/8" H x 147/16" L x 97/16" W
6600 lbs.
3/4" and 11/4", standard
MT3
Included
1-800-700-5919
23
Cutter capacity
4" dia.
Made in Germany
Powered by
Powerful Reliable
16 Amp double-insulated motor
4-speed oilbath gearbox for
applications requiring high power
Designed for continuous use
Infinitely variable torque
control and full-wave
control electronics
4 Gears
with Variable
Speed
Equipped with
Electronic
Safety Shutoff
Sensor (see p. 3)
Tapping
Reaming
Integrated Safety
Green/Red LED magnetic force
indicator for safe operation
Internal cable routing
Simple, ergonomic arrangement
of controls for one-handed operation
Emergency-off function
24
MAB 825
MAB 825 V
Standard
model with
16 Amp
motor
Includes
automatic
feed ideal
for production
applications
MAB 845
Includes 30
movement left
and right and
3/4" forward
and backward
Cutter Capacity
Twist Drill /
Countersink
Ream / Tap
Stroke
(length)
4-gear Variable
Speed (RPM)
4"
11/4" / 2"
11/4" / 11/8"
10"
40-110
65-175
140-360
220-600
1-800-700-5919
Electronics
Overheat
Protection
Variable-speed CoolMag
Control
Magnet Force
Indicator
Countersinking
Reversible
(CW/CCW)
SafeMag
14.41"
Specifications
Made in Germany
Powered by
Cutter capacity
4" dia.
22.05"
18.70 - 28.54"
9.41"
1.85"
2.58"
8.66"
1.65"
4.33"
Speeds
40-110, 65-175
140-360, 220-600 RPM
41/3" W x 85/8" L
185/8" H x 147/16" L x 97/16" W
6600 lbs.
3/4" and 11/4", standard
MT3
Included
Order MAB 825 V
Order MAB 845
30
3/4"
Model MAB 845 features a swivel
base providing 30 movement left
and right and 3/4" forward and
backward.
Standard Equipment
1 Magnetic drilling machine
1 Quick-change arbor system
KEYLESS Weldon 3/4"
1 Arbor 11/4" Weldon, MT3
4 Pilot pins - 1", 2", 3"and 4" depth
1 Safety chain
1 Hexagon socket screw key SW 6
Standard
Equipment
also includes
operating
manual, auto
lubrication,
safety strap,
carabin hook
and allen keys.
1-800-700-5919
25
MAB 1300
Cutter capacity
5 1/8" dia.
Made in Germany
Powered by
Powerful Reliable
Equipped with
Electronic Safety
Shutoff Sensor (see p. 3)
4 Gears
with Variable
Speed
Twist Drilling
Tapping
Integrated Safety
Green/Red LED magnetic force
indicator for safe operation
Equipped with Electronic Safety
Shutoff Sensor (see p. 3)
Countersinking
Emergency-off function
26
Optional
Special-Purpose
Cutting Tool
Cutter Capacity
Twist Drill /
Countersink
Ream / Tap
Stroke
(length)
4-gear Variable
Speed (RPM)
5-1/8"
1-3/4" / 3"
2" / 1-5/8"
3.35"
(12" without
retainer)
30-80
50-120
130-350
210-550
1-800-700-5919
Electronics
Overheat
Protection
Variable-speed CoolMag
Control
Magnet Force
Indicator
Reversible
(CW/CCW)
SafeMag
MAB 1300
Specifications
19.5"
Made in Germany
Powered by
Cutter capacity
5 1/8" dia.
27"
22.05 - 34.45"
10"
2"
3.26"
4.72"
14.17"
Weight
112 lbs.
Hole Capacity
51/8" dia.**
13/4" dia.
Tapping Capacity
15/8" dia.
Speeds
30-80, 50-120
130-350, 210-550 RPM
43/4" W x 14" L
Dimensions
23,600 lbs.
Arbor Bore
Spindle
MT4
Automatic Lubrication
Included
Accessories
See page 28
for tapping
accessories
and wheeled
carrying case.
Standard Equipment
1 Magnetic drilling machine
1 Carrying case on wheels
1 Arbor adapter to 3/4" Weldon
1 Safety chain
1 Hexagon socket screw key SW6
1 Drift key MT4
Standard
Equipment
also includes
auto lubrication,
safety strap,
carabin hook
and allen keys.
1 Operating manual
ZHK 1300
wheeled
carrying case
included with
MAB 1300
1 Warranty certificate
1-800-700-5919
27
MAB 1300
Accessories
Made in Germany
Powered by
Cutter capacity
5 1/8" dia.
Watertight, shock-proof and robust the right protection for your machine.
Tapping Accessories for MAB 1300, MAB 825, MAB 845 and CSU 100/3RL
Part No. GSW-444 quick-change
tapping chuck with MT4 connection
(for MAB 1300). Collets not included.
Morse
Taper
Tap
Size
70308
70301
70302
70303
70304
3
3
3
3
3
5/8"
3/4"
7/8"
1"
1-1/8"
.480
.590
.697
.800
.896
.366
.442
.523
.600
.672
70403
70404
70405
70406
70407
70408
4
4
4
4
4
4
1"
1-1/8"
1-1/4"
1-3/8"
1-1/2"
1-5/8"
.800
.896
1.021
1.108
1.233
1.305
.600
.672
.766
.831
.925
.979
See page 43
for additional
tapping options.
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
1
ZGA 1/4
ZGA 5/16
ZGA 3/8
ZGA 7/16
ZGA 1/2
ZGA 9/16
ZGA 5/8
ZGA 11/16
ZGA 3/4
ZGA 033
(1-1/4" Weldon shank)
1-1/4
ZGA 042
(1-1/4" Weldon shank)
Bushing Reduces
1-1/4" Weldon shank to
3/4" Weldon shank
Order No. ZAP 200
Reducing Sleeve
DIN2185
Order No. ZRH 430 for MT 4:3
(adapts MT4 to MT3)
28
1-800-700-5919
Powerful Reliable
Integrated Safety
Emergency-off function
Cutter capacity
1 1/4" dia.
Motor Power
Weight
24 lbs.
Hole Capacity
11/4" dia.
1/2" dia.
Tapping Capacity
Speed
450 RPM
65/16" W x 31/4" H
Dimensions
Arbor Bore
3/4"
Spindle
Automatic Lubrication
Included
Reversible Motor
Order CSU32RL
Power Assist
Weldon Shank
1-800-700-5919
29
Made in Germany
Powered by
Powerful Reliable
Integrated Safety
Strong 10.5 Amp motor
Compact, lightweight and
portable 16-1/2" high, 29 lbs.
2-gear variable speed gearbox
Designed for continuous use
Emergency-off function
Motor Power
Weight
29 lbs.
Hole Capacity
2" dia.
7/8" dia.
Tapping Capacity
Speeds
61/2" W x 31/2" H
Dimensions
Arbor Bore
3/4"
Spindle
MT2
Automatic Lubrication
Included
Reversible Motor
Order CSU50RL
Power Assist
Weldon Shank
30
1-800-700-5919
CSU 100/3RL
Powerful reversible motor for
drilling and tapping
Twist Drilling
Tapping
Reaming
Countersinking
CSU 80AC
Powerful high-torque motor
with multiple speeds
Motor Power
Motor Power
Weight
57 lbs.
Weight
57 lbs.
Hole Capacity
33/16"
Hole Capacity
4" dia.
11/4"
11/4" dia.
Speeds
Tapping Capacity
11/8" dia.
Speeds (variable)
9" W x 43/8" H
9" W x 4" H
Dimensions
Dimensions
dia.
dia.
3/4"
Spindle
Arbor Bore
3/4"
MT3
Spindle
MT3
Automatic Lubrication
Included
Automatic Lubrication
Included
Power Assist
Power Assist
Standard Equipment includes auto lubrication, auto chuck cutter holder, safety chain, carabin
hook, allen keys, pilot pins and carrying case.
Steel
case intended mainly for shipping purposes; damage may occur in transit.
1-800-700-5919
31
AIRBOR AB-4300
Cutter capacity
2 1/16" dia.
ATEX Classified
Safe Reliable
Inherently safer than electromagnetic drills in
hazardous atmospheres and wet environments
where electricity requires "hot work permits"
ATEX classified
Industrys first completely air-operated
magnetic drill NOELECTRICITY!
Fail-safe permanent magnet is
activated "on"and "off"by air
pressure; in the event of a loss of
air flow, the magnet will not
disengage
Pressurized lubrication
system (Part No.
9 4002 0020)
Model AB-4300-2
Cutter Capacity
Twist Drill /
Countersink
Stroke
(length)
Speed Range
(RPM)
21/16"
1/2"
Up to 101/4"
400
Model Comparison
AB-4300-2R
AB-4300-2
Drill Stroke
w/cutters
w/chuck
w/cutters
w/chuck
10 1/4"
7 1/2"
4 7/8"
1 3/4"
closed
open
closed
open
13 1/2"
22"
13 1/2"
17 1/2"
lbs.
kg
lbs.
kg
43
20
38
18
Height
Weight
1.6 HP
Hole Capacity
21/16" dia.
No Load Speed
400 RPM
83/4" W x 31/2" L
Dimensions
1600 lbs.
Arbor Bore
3/4"
Automatic Lubrication
Weldon Shank
Included
Stroke Length
47/8"
Stroke Length
101/4"
32
1-800-700-5919
Safe Reliable
Ideal for industrial, construction, marine
and mining applications
Drill structural steel and other metals
Hydraulic motor safe for underwater use
Manually operated permanent magnet
with ratchet control has holding strength
of 1300 lbs.
With a 3/4"
chuck (Part No.
602045A), this
model easily
converts to a
standard drill
press with a 3"
stroke.
Cutter Capacity
Twist Drill /
Countersink
Stroke
(length)
Speed Range
(RPM)
Cutter capacity
2 1/16" dia.
Model HB 4400
Hoses not included
21/16"
1/2"
Up to 33/4"
0-630
1.5 HP
Weight
481/2 lbs.
Hole Capacity
21/16" dia.
1/2"
0-630 RPM
Hydraulic Supply
71/4" W x 3" L
Dimensions
1300 lbs.
Automatic Lubrication
Included
dia.
1-800-700-5919
33
Annular Cutters
ANNULAR CUTTERS
Weldon Shank
34
1-800-700-5919
3: Ejecting
ANNULAR CUTTERS
1: Centering
3"
3/4" - 5-1/8"
4"
3/4" - 5-1/8"
1-800-700-5919
35
Unibroach Stack Cutters are available in diameters from 9/16" to 1 1/8" in 1", 2" and 3" depths. Drill multiple layers
of steel without stopping to remove the center slug. Please contact us or consult our price list for more information.
36
1-800-700-5919
6-Series HSS
2" Depth
3" Depth*
Diameter
Order No.
Diameter
Order No.
Diameter
6-1-114
6-1-116
6-1-118
6-1-120
6-1-122
6-1-124
6-1-126
6-1-128
6-1-130
6-1-132
6-1-134
6-1-136
6-1-138
6-1-140
6-1-142
6-1-144
6-1-146
6-1-148
6-1-150
6-1-152
6-1-154
6-1-156
6-1-158
6-1-160
6-1-162
6-1-164
6-1-166
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-5/16"
1-3/8"
1-7/16"
1-1/2"
1-9/16"
1-5/8"
1-11/16"
1-3/4"
1-13/16"
1-7/8"
1-15/16"
2"
2-1/16"
6-1-214
6-1-216
6-1-218
6-1-220
6-1-222
6-1-224
6-1-226
6-1-228
6-1-230
6-1-232
6-1-234
6-1-236
6-1-238
6-1-240
6-1-242
6-1-244
6-1-246
6-1-248
6-1-250
6-1-252
6-1-254
6-1-256
6-1-258
6-1-260
6-1-262
6-1-264
6-1-266
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-5/16"
1-3/8"
1-7/16"
1-1/2"
1-9/16"
1-5/8"
1-11/16"
1-3/4"
1-13/16"
1-7/8"
1-15/16"
2"
2-1/16"
N/A
N/A
N/A
N/A
N/A
6-1-324
6-1-326
6-1-328
6-1-330
6-1-332
6-1-334
6-1-336
6-1-338
6-1-340
6-1-342
6-1-344
6-1-346
6-1-348
6-1-350
6-1-352
6-1-354
6-1-356
6-1-358
6-1-360
6-1-362
6-1-364
6-1-366
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-5/16"
1-3/8"
1-7/16"
1-1/2"
1-9/16"
1-5/8"
1-11/16"
1-3/4"
1-13/16"
1-7/8"
1-15/16"
2"
2-1/16"
6-1-168
6-1-170
6-1-172
6-1-174
6-1-176
6-1-178
6-1-180
6-1-182
6-1-184
6-1-186
6-1-188
6-1-190
6-1-192
6-1-194
6-1-196
2-1/8"
2-3/16"
2-1/4"
2-5/16"
2-3/8"
2-7/16"
2-1/2"
2-9/16"
2-5/8"
2-11/16"
2-3/4"
2-13/16"
2-7/8"
2-15/16"
3"
6-1-268
6-1-270
6-1-272
6-1-274
6-1-276
6-1-278
6-1-280
6-1-282
6-1-284
6-1-286
6-1-288
6-1-290
6-1-292
6-1-294
6-1-296
2-1/8"
2-3/16"
2-1/4"
2-5/16"
2-3/8"
2-7/16"
2-1/2"
2-9/16"
2-5/8"
2-11/16"
2-3/4"
2-13/16"
2-7/8"
2-15/16"
3"
6-1-368
6-1-370
6-1-372
6-1-374
6-1-376
6-1-378
6-1-380
6-1-382
6-1-384
6-1-386
6-1-388
6-1-390
6-1-392
6-1-394
6-1-396
2-1/8"
2-3/16"
2-1/4"
2-5/16"
2-3/8"
2-7/16"
2-1/2"
2-9/16"
2-5/8"
2-11/16"
2-3/4"
2-13/16"
2-7/8"
2-15/16"
3"
6-1-198
6-1-1100
6-1-1102
6-1-1104
6-1-1106
6-1-1108
6-1-1110
6-1-1112
6-1-1114
6-1-1116
6-1-1118
6-1-1120
6-1-1122
6-1-1124
6-1-1126
6-1-1128
3-1/16"
3-1/8"
3-3/16"
3-1/4"
3-5/16"
3-3/8"
3-7/16"
3-1/2"
3-9/16"
3-5/8"
3-11/16"
3-3/4"
3-13/16"
3-7/8"
3-15/16"
4"
6-1-298
6-1-2100
6-1-2102
6-1-2104
6-1-2106
6-1-2108
6-1-2110
6-1-2112
6-1-2114
6-1-2116
6-1-2118
6-1-2120
6-1-2122
6-1-2124
6-1-2126
6-1-2128
3-1/16"
3-1/8"
3-3/16"
3-1/4"
3-5/16"
3-3/8"
3-7/16"
3-1/2"
3-9/16"
3-5/8"
3-11/16"
3-3/4"
3-13/16"
3-7/8"
3-15/16"
4"
6-1-398
6-1-3100
6-1-3102
6-1-3104
6-1-3106
6-1-3108
6-1-3110
6-1-3112
6-1-3114
6-1-3116
6-1-3118
6-1-3120
6-1-3122
6-1-3124
6-1-3126
6-1-3128
3-1/16"
3-1/8"
3-3/16"
3-1/4"
3-5/16"
3-3/8"
3-7/16"
3-1/2"
3-9/16"
3-5/8"
3-11/16"
3-3/4"
3-13/16"
3-7/8"
3-15/16"
4"
Shank size:
3/4" for cutters up to 3" dia.
1-1/4" for cutters 3-1/16 to 5-1/8"dia.
Pilot pin included with
every annular cutter
Cutter Kits
Each HSS steel cutter kit comes with the
following: 9/16",11/16", 13/16", 15/16",
1-1/16", pilot pin & carrying case.
Order No.
Description
6-1-001
6-1-002
ANNULAR CUTTERS
1" Depth
Order No.
Description
7-3-102
7-3-202
7-3-302
7-3-402
1-800-700-5919
37
TiAlN coating for up to 4x tool life, less friction and more power
38
1-800-700-5919
1" Depth
Order No.
8-1-114 T
8-1-116 T
8-1-118 T
8-1-120 T
8-1-122 T
8-1-124 T
8-1-126 T
8-1-128 T
8-1-130 T
8-1-132 T
8-1-134 T
8-1-136 T
8-1-138 T
8-1-140 T
8-1-142 T
8-1-144 T
8-1-146 T
8-1-148 T
8-1-150 T
8-1-152 T
8-1-154 T
8-1-156 T
8-1-158 T
8-1-160 T
8-1-162 T
8-1-164 T
8-1-166 T
Diameter
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-5/16"
1-3/8"
1-7/16"
1-1/2"
1-9/16"
1-5/8"
1-11/16"
1-3/4"
1-13/16"
1-7/8"
1-15/16"
2"
2-1/16"
2" Depth
Order No.
8-1-214 T
8-1-216 T
8-1-218 T
8-1-220 T
8-1-222 T
8-1-224 T
8-1-226 T
8-1-228 T
8-1-230 T
8-1-232 T
8-1-234 T
8-1-236 T
8-1-238 T
8-1-240 T
8-1-242 T
8-1-244 T
8-1-246 T
8-1-248 T
8-1-250 T
8-1-252 T
8-1-254 T
8-1-256 T
8-1-258 T
8-1-260 T
8-1-262 T
8-1-264 T
8-1-266 T
Diameter
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-5/16"
1-3/8"
1-7/16"
1-1/2"
1-9/16"
1-5/8"
1-11/16"
1-3/4"
1-13/16"
1-7/8"
1-15/16"
2"
2-1/16"
3" Depth*
Order No.
Diameter
N/A
N/A
N/A
N/A
N/A
8-1-324 T
8-1-326 T
8-1-328 T
8-1-330 T
8-1-332 T
8-1-334 T
8-1-336 T
8-1-338 T
8-1-340 T
8-1-342 T
8-1-344 T
8-1-346 T
8-1-348 T
8-1-350 T
8-1-352 T
8-1-354 T
8-1-356 T
8-1-358 T
8-1-360 T
8-1-362 T
8-1-364 T
8-1-366 T
ANNULAR CUTTERS
Description
8-1-001 T
8-1-002 T
Description
7-3-102
7-3-202
7-3-302
7-3-402
1-800-700-5919
39
Large HSS
or M42
Cutters
40
1-800-700-5919
9-1-116 C
9-1-118 C
9-1-120 C
9-1-122 C
9-1-124 C
9-1-126 C
9-1-128 C
9-1-130 C
9-1-132 C
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
Order No.
Diameter
9-1-216 C
9-1-218 C
9-1-220 C
9-1-222 C
9-1-224 C
9-1-226 C
9-1-228 C
9-1-230 C
9-1-232 C
9-1-234 C
9-1-236 C
9-1-238 C
9-1-240 C
9-1-242 C
9-1-244 C
9-1-246 C
9-1-248 C
9-1-250 C
9-1-252 C
9-1-254 C
9-1-256 C
9-1-258 C
9-1-260 C
9-1-262 C
9-1-264 C
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-5/16"
1-3/8"
1-7/16"
1-1/2"
1-9/16"
1-5/8"
1-11/16"
1-3/4"
1-13/16"
1-7/8"
1-15/16"
2"
1-3/8" Depth
Order No.
Diameter
Order No.
9-1-134 C
9-1-136 C
9-1-138 C
9-1-140 C
9-1-142 C
9-1-144 C
9-1-146 C
9-1-148 C
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-5/16"
1-3/8"
1-7/16"
1-1/2"
9-1-150 C
9-1-152 C
9-1-154 C
9-1-156 C
9-1-158 C
9-1-160 C
9-1-162 C
9-1-164 C
Diameter
1-9/16"
1-5/8"
1-11/16"
1-3/4"
1-13/16"
1-7/8"
1-15/16"
2"
2-3/8" Depth
Order No.
Diameter
9-1-266 C
9-1-268 C
9-1-270 C
9-1-272 C
9-1-274 C
9-1-276 C
9-1-278 C
9-1-280 C
9-1-282 C
9-1-284 C
9-1-286 C
9-1-288 C
9-1-290 C
9-1-292 C
9-1-294 C
9-1-296 C
9-1-298 C
9-1-2100 C
9-1-2102 C
9-1-2104 C
9-1-2106 C
9-1-2108 C
9-1-2110 C
9-1-2112 C
2-1/16"
2-1/8"
2-3/16"
2-1/4"
2-5/16"
2-3/8"
2-7/16"
2-1/2"
2-9/16"
2-5/8"
2-11/16"
2-3/4"
2-13/16"
2-7/8"
2-15/16"
3"
3-1/16"
3-1/8"
3-3/16"
3-1/4"
3-5/16"
3-3/8"
3-7/16"
3-1/2"
Order No.
Diameter
9-1-2114 C
9-1-2116 C
9-1-2118 C
9-1-2120 C
9-1-2122 C
9-1-2124 C
9-1-2126 C
9-1-2128 C
9-1-2130 C
9-1-2132 C
9-1-2134 C
9-1-2136 C
9-1-2138 C
9-1-2140 C
9-1-2142 C
9-1-2144 C
9-1-2146 C
9-1-2148 C
9-1-2150 C
9-1-2152 C
9-1-2154 C
9-1-2156 C
9-1-2158 C
9-1-2160 C
9-1-2162 C
3-9/16"
3-5/8"
3-11/16"
3-3/4"
3-13/16"
3-7/8"
3-15/16"
4"
4-1/16"
4-1/8"
4-3/16"
4-1/4"
4-5/16"
4-3/8"
4-7/16"
4-1/2"
4-9/16"
4-5/8"
4-11/16"
4-3/4"
4-13/16"
4-7/8"
4-15/16"
5"
5-1/8"
Shank size:
3/4" for cutters up to 3" dia.
1-1/4" for cutters 3-1/16 to 5-1/8"dia.
Pilot pin included with
every annular cutter
Cutter Kits
Each hornet carbide cutter kit comes with
the following: 9/16",11/16", 13/16", 15/16",
1-1/16", pilot pin & carrying case.
Order No.
Description
Description
9-3-102 C
9-3-202 C
9-3-302 C
3-3/8" Depth
Order No.
9-1-324 C
9-1-326 C
9-1-328 C
9-1-330 C
9-1-332 C
9-1-334 C
9-1-336 C
9-1-338 C
9-1-340 C
9-1-342 C
9-1-344 C
9-1-346 C
9-1-348 C
9-1-350 C
9-1-352 C
9-1-354 C
9-1-356 C
9-1-358 C
9-1-360 C
9-1-362 C
9-1-364 C
9-1-366 C
9-1-368 C
Diameter
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-5/16"
1-3/8"
1-7/16"
1-1/2"
1-9/16"
1-5/8"
1-11/16"
1-3/4"
1-13/16"
1-7/8"
1-15/16"
2"
2-1/16"
2-1/8"
Order No.
Diameter
9-1-370 C
9-1-372 C
9-1-374 C
9-1-376 C
9-1-378 C
9-1-380 C
9-1-382 C
9-1-384 C
9-1-386 C
9-1-388 C
9-1-390 C
9-1-392 C
9-1-394 C
9-1-396 C
9-1-398 C
9-1-3100 C
9-1-3102 C
9-1-3104 C
9-1-3106 C
9-1-3108 C
9-1-3010 C
9-1-3112 C
9-1-3114 C
9-1-3116 C
2-3/16"
2-1/4"
2-5/16"
2-3/8"
2-7/16"
2-1/2"
2-9/16"
2-5/8"
2-11/16"
2-3/4"
2-13/16"
2-7/8"
2-15/16"
3"
3-1/16"
3-1/8"
3-3/16"
3-1/4"
3-5/16"
3-3/8'
3-7/16"
3-1/2"
3-9/16"
3-5/8"
Order No.
Diameter
9-1-3118 C
9-1-3120 C
9-1-3122 C
9-1-3124 C
9-1-3126 C
9-1-3128 C
9-1-3130 C
9-1-3132 C
9-1-3134 C
9-1-3136 C
9-1-3138 C
9-1-3140 C
9-1-3142 C
9-1-3144 C
9-1-3146 C
9-1-3148 C
9-1-3150 C
9-1-3152 C
9-1-3154 C
9-1-3156 C
9-1-3158 C
9-1-3160 C
9-1-3162 C
3-11/16"
3-3/4"
3-13/16"
3-7/8"
3-15/16"
4"
4-1/16"
4-1/8"
4-3/16"
4-1/4"
4-5/16"
4-3/8"
4-7/16"
4-1/2"
4-9/16"
4-5/8"
4-11/16"
4-3/4"
4-13/16"
4-7/8"
4-15/16"
5"
5-1/8"
ANNULAR CUTTERS
Order No.
9-3-202A C
9-3-302A C
7-3-402
1-800-700-5919
41
Lubricants
LUBRICANTS AND PILOT PINS
ProLube Ideal for cutting steel, stainless steel and hard metals
Your cutting tools will work cooler, longer and more
efficiently with ProLube Lubricants from CS Unitec.
Prolong tool life by reducing friction and wear
Unique composition provides excellent adhesion
to cutting tools for maximum lubrication
Corrosion inhibitor
Non-toxic
ProLube Paste
CS 7030-712
12 oz. tub
ProLube Liquid
Water soluble 16:1
CS 7010-504 - 1 gal. bottle
Upgrade your drill's cooling system: see page 44 for arbors with automatic cooling.
Cutting Oil
High-performance, biodegradable, non-hazardous oils and pastes
Oils for heavy removal of metal, including stainless steel
Chlorine-free (MSDS on bottle/tub)
Not necessary to dilute with water
Cutting Oil:
Part No. ZHS 006 (quart)
Part No. ZHS 005 (gallon)
Shown at right:
2-piece pin for
3" and 4" depth
cutters with
8mm pilot hole
(Part No. 7-3-402).
42
1-800-700-5919
C
D
1/4
5/16
3/8
7/16
1/2
9/16
ZGA 1/4
ZGA 5/16
ZGA 3/8
ZGA 7/16
ZGA 1/2
ZGA 9/16
5/8
11/16
3/4
1
ZGA 5/8
ZGA 11/16
ZGA 3/4
ZGA 033
(1-1/4" Weldon shank)
1-1/4
ZGA 042
(1-1/4" Weldon shank)
Tap up to
1-5/8"
max. dia.
Bushing Reduces
1-1/4" Weldon shank to
3/4" Weldon shank
Order No. ZAP 200
Reducing Sleeve
DIN2185
Order No. ZRH 430 for MT 4:3
(adapts MT4 to MT3)
GSW-222
GSW-830C
Accessories
GSW-444
QuickChange
Chuck
1-800-700-5919
GSS-4xx
Collet
43
Accessories
ARBORS AND POWER ASSIST
Manual Cooling
Automatic Cooling
GO!
Keyless,
quick-change
system for annular
cutters saves time
and money.
Power Assist
The Power Assist is a standard capstan, designed with delayed torque
transfer. This decreases the load on both cutter and drilling machine,
allowing the machine to maintain max. RPM under full load.
Reduces drilling time Prevents cutter breakage
Extends lifespan of cutter/drill bit and machine
ZPA 401 Power Assist for CSU32 and CSU50 series
ZPA 402 Power Assist for CSU80 and CSU100/3 series
44
1-800-700-5919
Power
Assist
Capstan
Accessories
Extra-long holders extend stroke of drills
Extend cutter reach up to 18"
Available for magnetic drills with 3/4" arbor bore or MT3
Also available with 3 flats for straight shank drill
chucks and R8 shanks for drill presses
Drill difficult-to-reach areas
Extend cutter reach over the
side or through an existing hole*
7-9-902 2" extension
7-9-903 3" extension
7-9-906 6" extension
7-9-912 12" extension
7-9-918 18" extension
3/4"
R8
2-in-1 Drill/Taps
Weldon
Shank
(2 Flats)
82 and 90 Countersinks
Manufactured of HSS with 5% cobalt
3/4" Weldon shank
1-800-700-5919
45
Accessories
STARTER KITS AND POWER WORKER MAGNET
Starter Kits
CSUnitec starter kits offer the essentials you need
to begin drilling. We have two options that provide a
cost-effective tool set for your application.
Easily clean up sharp-edged drill chips, screws and other metal parts
POW 100
Items are safely ejected off of Power Worker without hand contact
Ideal for hard-to-reach spaces
46
1-800-700-5919
Clamping Devices
A true advance in magnetic drilling technology:
The new clamping system MOBIL CLAMP can be used to
convert a magnetic drilling machine into a bench drill.
Extends the functionality of your portable magnetic drill. Ideal for
parts that previously could only be drilled in the workshop they
can now be machined on site. MOBIL CLAMP makes it possible
to drill, countersink, ream or tap small parts, since these can be
mounted into the quick clamping device.
With the mounting of a magnetic drilling machine onto the
surface of the vice and the subsequent activation of the magnet,
you will have a versatile, stationary drilling machine in next to no
time. The magnetic drilling machine becomes a multi-purpose
machine: whether large or small applications, flat or high, with the twist drill or the reamer,
everything is possible. A stable support, designed for the MOBIL CLAMP
clamping device, ensures the correct
working height and a comfortable and
reliable operation.
ZMC 180
MOBIL CLAMP
Order No.
ZMC 180
ZMC 300
Jaw
width
CLAMPING DEVICES
MOBIL CLAMP
Quick-action
clamping jaw
V-block
clamping jaw
4"
3.15" (80mm)
(100mm) clamping width
Powerful grip
Jaws with step and
prism for clamping of
flat and round material.
Fine adjustment
in longitudinal
movement by an
adjusting screw
accurately set to
the machining
point.
ZMC 300
1-800-700-5919
47
Clamping Devices
CLAMPING DEVICES
Vise
Accessories
Drilling Pillar
Order No. ZBS 100
48
1-800-700-5919
Vacuum Plates
VACUUM PLATES
1-800-700-5919
49
31/4"
Pipe diameters
- 10"
Chain length: 351/2"
For models: MABasic 200, MABasic 400,
MABasic 450, MAB 425, MAB 455,
MAB 485, MDM 40 and CSU 32
50
1-800-700-5919
Custom-engineered Machines
Unusual applications require unique solutions. We
can help you build custom drills for a wide variety of
applications. With our considerable experience
building custom drills, our engineers can assist you
to create machines that can drill on uneven
surfaces, in various directions, and more.
We enjoy a challenge!Contact us
today for a professional solution
for your unique application.
Our capabilities include:
In-house CADdesign
Prototype construction
Manufacturing of special
accessories
Custom Machine
Options Include:
Reverse Drilling
Alternative Mounting
Configurations
Magnet Variations
Motor Customization
Adjustable Drilling Depth
Machine
rendering
above shows
reverse-mount
motor for
drilling upside
down.
CUSTOM-ENGINEERED MACHINES
Call 1-800-700-5919
for design assistance.
1-800-700-5919
51
EKF300.3
EKF450.3
0.063 (1.6mm)
0.098 (2.5mm)
EKF450.3
EKF452.3
Beveling angle*
30
45
0.098 (2.5mm)
1/4"
1/4"
1/4"
Motor power/Voltage
Standard equipment
includes milling head and
three inserts, SW22 key,
carrying case and users
manual. Please see our Price
List for available accessories.
Cutting speed
3000 SFPM
Cutting inserts
Dimensions (L x W x H)
Weight
10.5 lbs.
52
Radius
45
1-800-700-5919
The optimum
fixture for stationary
deburring of small parts (Order No. ZKF 100)
SKF 25
Single-operator,
straightforward handling
Portable Beveler Specifications
SKF 25
15 - 60
Beveling angle
16 Amp
Motor power
Voltage
3/4"
Cutting speed
1800 SFPM
Cutting inserts
10
16-1/2" x 13"
Dimensions (L x W x H)
43 lbs.
Weight
1-800-700-5919
53
Powered by
Continuously
Adjustable
Beveling Angle
Bevel 15 to 60
angles and land
width up to 1-3/16"
on plate up to 1-1/2"
thick.
Reversible Carbide
Cutting Inserts
Round inserts provide
more useable edges
per inserts
15 - 60
1-3/16"
Motor power
10 Amp
Voltage
230 V, 3-phase
Cutting speed
2750 SFPM
Cutting inserts
Dimensions (L x W x H)
Weight
110 lbs.
54
Made in Germany
1-800-700-5919
3-phase motor
Dimensions
Weight
Options
Deburring on
both sides of
the sheet edges
Sheet with burr
after cutting
37040
37060
37080
37120
Grit
40
60
80
120
Qty.
1-800-700-5919
55
2-Series Carbide-Tipped
Hole Cutters Extra Heavy Duty
Order No.
1-1-118
1-1-120
1-1-122
1-1-124
1-1-126
1-1-128
1-1-130
1-1-132
1-1-134
1-1-136
1-1-138
1-1-140
1-1-142
1-1-144
1-1-146
1-1-148
1-1-150
1-1-152
1-1-154
Diameter
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-5/16"
1-3/8"
1-7/16"
1-1/2"
1-9/16"
1-5/8"
1-11/16"
Order No.
Diameter
1-3/4"
1-13/16"
1-7/8"
1-15/16"
2"
2-1/16"
2-1/8"
2-3/16"
2-1/4"
2-5/16"
2-3/8"
2-7/16"
2-1/2"
2-9/16"
2-5/8"
2-11/16"
2-3/4"
2-13/16"
2-7/8"
1-1-156
1-1-158
1-1-160
1-1-162
1-1-164
1-1-166
1-1-168
1-1-170
1-1-172
1-1-174
1-1-176
1-1-178
1-1-180
1-1-182
1-1-184
1-1-186
1-1-188
1-1-190
1-1-192
Order No.
Diameter
2-15/16"
3"
3-1/16"
3-1/8"
3-3/16"
3-1/4"
3-5/16"
3-3/8"
3-7/16"
3-1/2"
3-9/16"
3-5/8"
3-11/16"
3-3/4"
3-13/16"
3-7/8"
3-15/16"
4"
1-1-194
1-1-196
1-1-198
1-1-1100
1-1-1102
1-1-1104
1-1-1106
1-1-1108
1-1-1110
1-1-1112
1-1-1114
1-1-1116
1-1-1118
1-1-1120
1-1-1122
1-1-1124
1-1-1126
1-1-1128
1-Series Accessories
Order No.
Diameter
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-5/16"
1-3/8"
2-Series Accessories
Description
56
Order No.
2-1-118
2-1-120
2-1-122
2-1-124
2-1-126
2-1-128
2-1-130
2-1-132
2-1-134
2-1-136
2-1-138
2-1-140
2-1-142
2-1-144
1-800-700-5919
Order No.
Description
2-1-pilot
2-1-screw
Pilot/Ejector Pin
Screw
Model
EHB 32/4.2
Model
EHB 20/2.4
Model
EAU 34/4 CB
Model No.
EHB 16/1.4 S
EHB 16/2.4 S
EHB 16/2.4 S/RL
EAW 16/2 R/L
EHB 20/2.4
EHB 32/4.2
EAU 34/4**
EAU 36/4 R R/L
Model
EAU 36/4 R R/L
Motor
Power Voltage*
(Amps)
High-torque output
Variable-speed, two- and four-geared drills
for optimum speed selection
Reversible motors and electronic torque control
on selected models
Ideal for special applications including valve turning,
tube rolling and other jobs
Safety slip clutch on 11/4" capacities
to protect operator and tool
Drilling capacities up to 11/4" in steel
Special OEM motors available
on request
One-year warranty
Max.
Drilling Torque ReversChuck/Arbor Weight
Capacity Output
ible
(lbs.)
(ft./lbs.)
in Steel
Load Speed
(RPM)
7.3
110V
0-500
5/8"
12
NO
5/8"Keyless
6.8
10
110V
0-430/0-760
5/8"
19
NO
5/8"Geared
19
YES
5/8"Geared
5/8"X
10
110V
0-430/0-760
5/8"
110V
510/950
N/A
YES
250/450
3/4"
32
NO
MT2
9.2
112
NO
MT3
15.2
10.5
110V
16 UN
15.5
110V
110/175/245/385
11/4"
20
110V
80/130/360/570
203
YES
MT3
19.5
22
110V
50-120
80-190
110-270
180-420
187
YES
MT3
20
** EAU 34/4 available with control box (on/off, reverse) order Model. No. EAU 34/4 CB
** EAU 36/4 R R/L available with control box order Model. No. EAU 36/4 R R/RL CB
1-800-700-5919
57
1 /2 "
twist
Up to
drill capacity
Model No.
16.3
110V
60-140 /
200-470
11/4"
2"
16.3
110V
30-75 /
90-230
N/A
3" ***
58
1 1 /4 "
YES
92 max.
YES
MT3
14
NO
MT3
15
1-800-700-5919
Control Boxes
with On/Off,
Variable Speed
Driving applications
include mills, spindles,
bar boring, tube rolling,
valve turning and more.
Spindle Options:
MT2 / MT3
Square Drive
or Threaded
Custom Design
Options Include:
Forward/Reverse
Variable Speeds
Multiple Gears
Spindle: MT or Special
Multifunctional
Control Boxes
or Handles
1/2 to 4 HP
Modular Design
Forward/Reverse Control
Contact us today to
configure the motor
that meets your specific
driving applications.
1-800-700-5919
59
ATEX
w/ Feed Spindle
D-handle Drills
Model
2 2089 0030
with reverse and
safety twist throttle
Model
2 1310 0010
See page 62
for Rotary
Hammer Drills
Model
2 1261 0010
Model 2 1266 0010
(RPM)
Chuck/
Arbor
Pistol Drills
1/2"
2 1261 0010
NO 1/2" Chuck
0.7
850
Hammer Drills (for concrete and underwater applications)
1/2"
2 1266 0010
NO 1/2" Chuck
0.75
950
D-handle Drills
1/2"
2 1310 0010
NO 1/2" Chuck
0.8
650
5/8"
2 1311 0010
NO
0.8
MT1
650
Morse Taper Drills w/ Feed Spindle
2 2089*
YES
1.7
11/4"
MT3
250
2 2506*
2.5
11/4"
YES
MT3
220
2 2502*
2.5
YES
2"
MT4
80
CFM
at 90 Length Feed Weight
Length (lbs.)
PSI
N/A
7 max.
21
93/4"
N/A
4.6
N/A
7 max.
21
12"
N/A
6.7
N/A
N/A
8 max.
8 max.
24
24
121/2"
11"
N/A
N/A
12
12
1"
2"
21/2"
36 max.
63 max.
173 max.
24
70
70
261/2"
15/8"
261/2"
21/2"
261/2"
21/2"
28
32
37
* The last four digits of the Model No. identify the type of throttle.
Please specify the four digits when ordering: 0010 for Lever Throttle or 0030 for Safety Twist Throttle.
60
1-800-700-5919
Slow-speed, High-torque
Straight Drive Units
Model
2 2087 0010
with reverse
and lever throttle
Pneumatic
Tube Torque Load Motor CFM at
Weight
Corner Drill Morse Drilling Reaming Rolling
Output Speed Power 90 PSI Length (lbs.)
Taper
(in
steel)
(in
steel)
Model No.
Cap. (ft./lbs.) (RPM) (HP)
Nonreversible
2 1602 0030
2 1701 0030
2 1801 0030
Reversible
2 2104 0030
#1
#2
#3
#4
5/8"
1/2"
7/8"
5/8"
11/4"
21/8"
1"
N/A
N/A
N/A
7
35
53
500
270
260
0.7
1.8
2.6
21
49
63
12.5"
20.9"
22.5"
7
19
25
2"
2"
86
180
3.0
71
23.8"
37
ATEX
Model No. 2 1602 0030 has a 3/8" NPT air inlet. 1/2" (13mm) hose is recommended. All other models have 3/4" NPT air inlet. A 1/2" (13mm)
hose is recommended for model 2 1701 0030. A 5/8" (15mm) hose is recommended for models 2 1801 0030 and 2 2104 0030.
Hydraulic
Corner Drill Morse Drilling Reaming Tube Torque Load Motor
Rolling Output Speed Power
Model No. Taper (in steel) (in steel) Cap. (ft./lbs.) (RPM) (HP)
2 1806 0010
#3
11/4"
16.3
110
1"
N/A
60
220
3.8
Oil
Flow/
PSI
Length
Weight
(lbs.)
4 GPM
@2000
21"
25
11/4"
2"
Yes
92 max.
Yes
Pneumatic
Torque Load
Tube Tapping Motor CFM at
Drive Unit Square
Power
Drive Output Speed ReversRolling
Cap.
Model No.
(HP) 90 PSI
ID
(ft./lbs.) (RPM) ible
Cap.
2 2081*
2 2087*
2 2088*
13/16"
7/8"
7/8"
413
413
138
20
20
60
YES
YES
YES
3"
3"
2"
11/2"
11/2"
3/4"
1.35
1.35
1.35
53
53
53
MT3
14
Height x
Length
Weight
(lbs.)
10.9" x 26.5"
10.9" x 26.5"
10.9" x 26.5"
29
29
29
* The last four digits of the Model No. identify the type of throttle. Square drive accessories available (see above).
Please specify the four digits when ordering: 0010 for Lever Throttle or 0030 for Safety Twist Throttle.
1-800-700-5919
61
ATEX
Hammer
with Rotation
Ideal for
concrete drilling
Rotation Only For drilling
steel and wood (not reversible)
Hydraulic
Model
2 2418 0010
SDS Max
Hydraulic Model
2 2406 0010
SDS Plus
Pneumatic Blows/
Hammer Drill Minute
(BPM)
Model No.
Drill
Solid Bit Core Bit
Speed Capacity Capacity
(RPM) (Concrete) (Concrete)
2 1266 0010*
2 2404 0010
2 2404 0030*
2 2417 0010*
0-2000
0-3000
0-3000
0-2500
SAE #8
oil port
Air
Power
at 90 Consumption at
PSI
90 PSI
0.75 HP
0.7 HP
0.7 HP
1.6 HP
21 CFM
21 CFM
21 CFM
53 CFM
Tool
System
1/2"
Dimensions
(inches)
12 x 81/2 x 4
SDS Plus 16 x 81/2 x 4
SDS Plus 16 x 81/2 x 4
SDS Max 191/2 x 9.8 x 41/2
Chuck
Weight
(lbs.)
7
11
11
26
* Underwater model Optional underwater air tool line conditioner to displace moisture, Part No. MS 9105. See page 63.
Hydraulic
Blows/
Drill
Solid Bit Core Bit
Hammer Drill Minute Speed Capacity Capacity
(BPM) (RPM) (Concrete) (Concrete)
Model No.
Twist
Drill
(wood)
Power Flow at
at 1160 1160 PSI
PSI
(GPM)
Tool
System
Dimensions
(inches)
2 2406 0010 0-3400 0-625 1" dia. 3" dia. 3/4" dia. 0.8 HP 5.8-13.2 SDS Plus
18 x 101/4 x 4
2 2406 0020
Same as above. Includes 2 2406 9970 Pressure Reducing Valve for 2000 PSI.
2 2418 0010 0-2500 0-250 2" dia. 6" dia. 11/4" dia. 1.8 HP 2.6-13.2 SDS Max 191/2 x 111/8 x 71/2
2 2418 0020
Same as above. Includes 2 2406 9970 Pressure Reducing Valve for 2000 PSI.
Hydraulic Hammer Drills operate at hydraulic pressures of 1160 PSI max. Pressure Reducing Valves are available to reduce
pressure from 2000 PSI or 5000 PSI. See above. Available with optional closed center.
62
1-800-700-5919
Weight
(lbs.)
15
37
1" Diameter
Yes
2 HP
1/2" Woodboring
Stub Taper
750 RPM
1/2"
17 1/2"
14 1/2 lbs.
1/2" ID
1/2" NPT
39 CFM
Part no. DE-99C
2" Diameter
Yes
3 HP
1/2" Woodboring
#2 Morse Taper
700 RPM
1/2"
18 1/2"
24 3/4 lbs.
1/2" ID
1/2" NPT
50 CFM
Part no. IBC 22 (MT2)
3" Diameter
Yes
3 HP
1/2" Woodboring
#2 Morse Taper
380 RPM
1/2"
18 1/2"
24 3/4 lbs.
1/2" ID
1/2" NPT
50 CFM
Part no. IBC 22 (MT2)
1-800-700-5919
MS 9105 1 quart/liter
63
ATEX
Model
6 1055 0075
Male Sq. Drive Head
1/2" or 3/4"
Model numbers pictured above (listed from top to bottom): 6 1055 0075
(with male drive), 6 1055 0010 (female), 6 1014 0075 (with male drive)
3/4"
M
M
3/4" M
1/2" M
3/4" M
1/2" M
3/4" M
1/2" M
7/8" F
1/2"
95
95
405
405
133
133
73.5
73.5
405
200
200
40
40
120
120
250
250
40
100
100
22
22
67
67
125
125
22
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
Side to
Air
Hose
Center Length Weight ConnID
Distance (inches) (lbs.)
ection (inches)
(inches)
(inches)
46
46
46
46
46
46
46
46
46
1
1
1
1
1
1
1
1
1
22
22
21
21
21
21
21
21
21
11
11
10
10
11
11
11
11
11
NPT 3/8
NPT 3/8
NPT 3/8
NPT 3/8
NPT 3/8
NPT 3/8
NPT 3/8
NPT 3/8
NPT 3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
* Also available with 3/4" Female Square Drive use 0010 instead of 0075 in model number.
Hydraulic
Nut Runner
Model No.
3 6242 0010*
3 6243 0010*
Square
Drive
Drive
F=Female Torque
M=Male
3/4"
3/4"
F
F
369
125
Free
Speed
(RPM)
Load
Speed
(RPM)
40
180
22
90
ConnSide to
Power Oil Flow Oil Pressure Center Length Weight ection
Quick
Distance (inches) (lbs.)
(GPM)
(HP)
(PSI)
Couplers
(inches)
1.6
1.6
4 - 13
4 - 13
90-2000
1300-2000
1
1
20
20
22
22
* Also available with 1/2" (3 6242 0099) and 3/4" (3 6242 0075) Male Square Drive
64
1-800-700-5919
1/2"
1/2"
FF
FF
Largest
Hand-held
Dry-cutting
Metal Saw
Integrated dust
collection port
Non-sparking
Non-magnetic
Torque
reaction
stabilizers
Non-Sparking and
Non-Magnetic Safety Tools
1-800-700-5919
65
90 Cut
2.75"
2.75"
3.9" x 2.75"
45 Cut
2.36"
2.36"
2.36" x 2.36"
Motor Power
13 Amp/115V*
Blade Diameter
10" (255mm)
Max. Depth of Cut
4" at 90
Speed (Free)
1,600 RPM
Arbor Size
1"
Blade Part No.
600598 (10" dia.)
Blade No. of Teeth
60T
Weight of Saw and Stand
42 lbs.
90 Cut
45 Cut
5.5"
4.72"
4.92"
3.15"
4.13" x 6.1" 2.95" x 3.93"
Motor Power
Blade Diameter
Max. Depth of Cut
Speed (Free)
Arbor Size
Blade Part No.
Blade No. of Teeth
Weight
19 Amp/115V*
14" (355mm)
6" at 90
1,400 RPM
1"
600570 (14" dia.)
90T
55 lbs.
66
1-800-700-5919
* The Model 5 1116 0020 saw also accepts 7-1/4" dia. blades.
1.7 HP
Air Motor
2 HP
Air
Motor
Teeth Thickness
60
.055"
Standard
blade .073"
(1.85mm)
thickness
Ultra-thin blade
(P/N 722-23060)
.055" (1.4mm)
thickness
1-800-700-5919
67
For tool specifications and ATEX and Ex Zone information, visit www.csunitec.com.
Call 1-800-700-5919 or 203-853-9522 to request any of the catalogs shown.
Concrete Tools:
Metalworking Tools:
Portable Mixers:
Portable Saws:
EIBENSTOCKS EXCLUSIVE
AGENT FOR NORTH AMERICA