Académique Documents
Professionnel Documents
Culture Documents
-- Latihan Soal
-- TITLE
-- Example simple Eclipse file, lecture notes
-- Specify dimension of model, NX, NY, NZ
DIMENS
-- NX NY NZ
10 10 3 /
-- Phases included (oil and water, i.e. 2-phase run)
OIL
WATER
-- Units to use, alternatives are METRIC, FIELD or LAB
FIELD
-- Specify maximum values for well data (# means max number of )
WELLDIMS
-- #wells #cell-connections Next three values are defaulted
4 5 3* /
-- Start date, i.e. Day 0 in simulation
START
1 JAN 2004 /
GRID
-- Turn off writing of data to report file
NOECHO
-- Definition of grid cells. From DIMENS keyword above, we have:
-- N = NX*NY*NZ = 10*10*3 = 300.
-- In each cell DX = DY = 1000 ft and DZ = 50 ft
-- (Dimension measured in feet since units were defined as FIELD above)
-- The grid cells are then defined by:
DX
300*1000 /
DY
300*1000 /
DZ
300*50 /
-- So far the grid shape has been defined, but we also need to define at
-- which depth (measured from sea level) the cell tops are. We assume a
-- horizontal reservoir, and input depths which are consistent with the
-- DZ-values we defined above.
TOPS
100*5000 100*5050 100*5100 /
-- Permeabilities are constant, so define 300 equal values.
PERMX
300*200 /
PERMY
300*200 /
PERMZ
300*20 /
-- Porosity is constant in each layer, so define 100 values in layer 1,
-- 100 in layer 2, and 100 in layer 3. Each layer contains 100 cells.
PORO
100*0.3
100*0.23
100*0.18 /
-- Request to write an INIT (initial) file. Contains all data used to
-- initialize the model
INIT
-- Turn report writing back on
ECHO
PROPS
-- Relative permeability for water and oil,