Académique Documents
Professionnel Documents
Culture Documents
0)
Hopefully, by now all the piping stress engineers are aware that the software Caesar II, 2016
(Version-8.0) is already released in November 2015. Many of you are curious to know the changes
in this new version and wish to get a feel of the software. I assume that you already have gone
through my earlier article on Caesar II-2016. If not then please click here to have a glance.
The latest CAESAR II release delivers a number of significant new and extended capabilities in
response to current market requirements, as well as direct feedback from the growing CAESAR II
user community. In this article I will try to explain the enhancements that Intergraph had
incorporated in the latest version of CAESAR II.
Updation in Piping Codes:
Addressed the code standard requirement to consider sustained (and occasional) stress
in all support conditions. New static load cases, called alternate sustained or alternate
occasional cases, depend upon the support configuration of a converged operating
condition. This condition addresses systems where non-linear supports are active in some
operating conditions and inactive in others. The alternate support condition is indicated
using the new Alternate SUS/OCC check box in the Static Analysis Load Case Editor.
Added two new load case templates (.tpl files) for use when recommending load cases,
which include support for the alternate SUS/OCC load cases. The template files
include: TPL the updated default load case template, which recommends alternate
sustained load casee for jobs including the B31.3 code and LOAD_EXP.TPL includes all
expansion load cases between different operating conditions. (This was the default
template in CAESAR II 2014.)
Updated materials to support the latest code edition. Updated B31.3 materials, including
changes to expansion coefficients (Ec), weld reduction factors (W), and elastic modulus
(EM) values. Updated allowable stress values for material 341 (A789 S32750) and 342
(A790 S32750). Corrected low temperature allowable values to match the code standard.
Moved the B31.3 Implement Appendix P configuration setting to SIFs and Stresses
>Legacy Settings as the B31.3 code standard no longer refers to Appendix P.
Added appropriate warnings and notes to the error checking module and the output
reports to account for the code updates.
ASME B31.8, 2014 Edition, including a small revision to the biaxial state of stress formula
(Sc), according to code Paragraph 833.4. You can find this formula in the CAESAR II
Quick Reference Guide.
Wind and Seismic Codes:
National Building Code of Canada (NBC) Seismic and Wind Codes, 2010 Edition.
ASCE 7 2010 Edition and IBC 2012 Edition wind code standards, including a change in
the wind load reduction factor.
Equipment Codes:
API 610, 11th Edition.
Group Edit view select and change values on multiple load cases all at once.
Enhanced List view Easier scrolling and viewing options, as well as filtering on columns,
drag-and-drop capabilities, and easier manipulation of load cases
Added easier access to third-party tools for better modeling and evaluation from the
CAESAR II main menu, to generate more accurate SIFs and K factors. Compare multiple
file results, assess the sensitivity of your model elements, and evaluate nozzle/branch
connections with NozzlePRO.
Expanded Hanger Data:
Added hanger data for the following hanger manufacturers: Hesterberg, Unison, Spring
Supports Mfg. Co., Senior, and Wookwang. So currently there are total 38 spring vendors
in Caesar II database. These are: 1. Anvil; 2. Bergen Power; 3. Power Piping; 4. NPS
Industries; 5. Lisega; 6. Fronek; 7. Piping Technology; 8. Capitol; 9. Piping Services; 10.
Basic Engineers; 11. Inoflex (Italy); 12. E. Myatt & Co.; 13. Sinopec; 14. BHEL; 15.
CASTIM 2000 (Italy, formerly Flexider); 16. Carpenter & Paterson; 17. Pipe Supports Ltd.;
18. Witzenmann; 19. Sarathi; 20. Myricks; 21. China Power; 22. Pipe Supports USA; 23.
Quality Pipe Supports; 24. PiHASA; 25. Binder; 26. Gradior; 27. NHK (Japan); 28. PSSI
GmbH; 29. Seonghwa; 30. Mitsubishi; 31. Yamashita; 32. Sanwa Tekki; 33. Techno
Industry; 34. Hesterberg; 35. Spring Supports Mfg. Co.; 36. Senior (Brazil); 37. Unison;
38. Wookwang.
Revised the listing of the manufacturer, Flexider, to its new name, CASTIM 2000.
Improved the Classic Piping Input to display a Pressure 3 value on the interface. This
allows you to input three sets of temperature and pressure values without having to open
a separate dialog box.
New single and multiple element-level right-click graphics menus containing many
frequently-used element commands and block (group) operations.
Improved Distance Measuring:
Added functionality so you can minimize the Distance dialog box while remaining in
measuring mode in the piping input. Perform multiple measurements around a model
continually without the dialog box blocking any of the model. When you exit the dialog box,
the software exits the distance mode and returns you to the previous operator. Also,
revised the layout to improve the usability of the dialog box, improved snapping in the Line
Drawing (single line) mode, and increased the default font size setting for distance
measurement labels on the model for ease of reading. Minimize mode for measuring lets
you perform multiple measurements without the Distance dialog box blocking any of the
model.
Added the ability to measure multiple distances in the Distance dialog box and see all of
your measurements simultaneously. Measure multiple distances (by using CTRL+click)
and see all of your measurements at once.
Larger default font size setting on distance measurements for ease of reading.
Enhanced S3D/SPR (VUE) Model Imports:
Added functionality to include zipped VUE (ZVF) or stitched VUE (SVF) files in a CAESAR
II model.
Added Filter/View Capabilities on 3D Models: