Académique Documents
Professionnel Documents
Culture Documents
Q1: Determine the moments at A, B, and C, then draw the moment diagram for the
beam. Assume the support at B is a roller and A&C are fixed. Let E=29x103 ksi.
Ans.: MA= -34.8 kip.ft, MB=-45.6 kip.ft , and RB=23.7 kips
Q2: The support B of the beam shown (E = 200 GPa, I = 50x106 mm4 ).
Use the moment distribution method to:
(a) Determine all the reactions at supports, and also
(b) Draw its quantitative shear and bending moment diagrams.
Ans.: MB=-25.33 kN.m , and RB=26.92 kN.
Q3: From the beam shown use the moment distribution method to:
(a) Determine all the reactions at supports, and also
(b) Draw its quantitative shear and bending moment diagrams, and qualitative
deflected shape.
Ans: MC=-43.25 kN.m , and RC=52.54 kN.
1 of 4
Q4:From the beam shown use the moment distribution method to:
(a) Determine all the reactions at supports, and also
(b) Locate the position of maximum bending moment .
Q6: Determine the moments at B, and C, then draw the moment diagram for the
beam. Assume the support at A is a pin and C is fixed. Let EI constant.
Ans.: MB=-14.9 kip.ft , and MC=1.44 kip.ft
2 of 4
Q7: Determine all the reactions at supports for the beam below. EI is constant. (Solve
this problem by using Symmetric Beam procedure).
MB= -36.07 kN.m , and RB=74.02 kN.
Q8: From the frame shown use the moment distribution method to:
(a) Determine all the reactions at supports
(b) Draw its quantitative shear and bending moment diagrams,and qualitative
deflected shape.
Ans.: MD= 5.0kN.m , RA=14.0 kN and RD=58.0 kN.
Q9: From the frame shown use the moment distribution method to determine all the
reactions at supports.
Ans.: MA= -95.5kN.m
3 of 4
A
Q10: From the frame shown use the moment distribution method to determine all the
reactions at supports. Assume support B, and E are pinned, and A is fixed.
Ans.: MAC= 8.91kN.m, and MDC= 38.0 kN.m
4 of 4